But it’s a power acoustic amp and subs with a better amp ima tear my truck apart at 20 hz driving at 3/4 on knob my hand goes numb definitely a upgrade from my old 12s but also ona fairly decent budget traded my 12 inch sundown lcs12s ina pre fab box and a 10 inch kicker comp r in a single 10 coustom box that was 2.4^3😂
@@blazed7785 hell yea man I fw ur shit man but the subs were just gonna be temporary till i got the Tesla’s I want but I think ima just run em at shows till I blow them and build a flat wall or sum bc I got a extended cab I could do 6 power acoustic 12s and I think it would hit pretty damn good for a budget build bc my box rn I built a few months ago ain’t perfect but it was my first box I’ve built my self but even tho it’s slowly tearing it’s self apart it plays good and loves 20-80hz and is just windy blew 20 bc the box unloads under 20hz
What kind of high to low adapter are you using? Not sure but check Idatalink for a kit to swap in an aftermarket deck. It will have a t harness as well that plugs into the OBD2 port so any factory controls integrated into the stock deck will be retained if the new deck is compatible like the nice Kenwood. If you keep the stock deck maybe use the Audio control thing to get the best high to low adapter plus more.
Look bro dnt know how much experience you got, due to the lack of audio content on your channel but I give my customers what the ask for and what they can afford.Fyi I'm using a lci converter,I really have a problem negativity on my channel.
@@blazed7785 I used to do car audio for a living. Its just a hobby these days since the industry is shit where I live. The RCA converter really does make a difference but most amps have a line converter built in. You could run your speaker wires to the amp directly if it has that option just to compare how the line converter is doing. A more expensive converter would be like the LC2i. I know that the audio control(not sure which one) can convert the speaker wires to RCA’s but more importantly also has a line driver built in so you can also get 4 volts out of the RCA at the amp. As far as the negative comment go. I didnt think I was being negative at all. Just wanted to throw a little knowledge your way. Sounds like you already have the audio control converter but check and see if it also has a line driver. Also, if you dont have haters that usually means your channel is also not growing!
@@Trucker-Belly look brah again miss me with this...I'm not the one you wanna do this with,dnt care about channel growth or none of that sh_t,I'm tell you that,big head, know it all guys, hater 's ect...I dnt need ....hate to come out hunting just cause you feeling Brody...find someone else that needs your sh_t last ⚠️
Clean bro, damn had them boys jumpin out the box, good job on that enclosure str8 bangin👍
Thanks my boy, you know I appreciate you for that💯😎did pretty good to be on stock stereo and 1 k rms...
I'm enjoying the builds mane keep em' coming!
Will do... unfortunately I'm sick as a dog right now...
Very loud I like it.
I gotta 05 f150 with 3 12 currently ona fb market place amp😂
But it’s a power acoustic amp and subs with a better amp ima tear my truck apart at 20 hz driving at 3/4 on knob my hand goes numb definitely a upgrade from my old 12s but also ona fairly decent budget traded my 12 inch sundown lcs12s ina pre fab box and a 10 inch kicker comp r in a single 10 coustom box that was 2.4^3😂
Dats wassup ...if it works and put work in that's all that matters ...
@@blazed7785 hell yea man I fw ur shit man but the subs were just gonna be temporary till i got the Tesla’s I want but I think ima just run em at shows till I blow them and build a flat wall or sum bc I got a extended cab I could do 6 power acoustic 12s and I think it would hit pretty damn good for a budget build bc my box rn I built a few months ago ain’t perfect but it was my first box I’ve built my self but even tho it’s slowly tearing it’s self apart it plays good and loves 20-80hz and is just windy blew 20 bc the box unloads under 20hz
@@Ole.red_4.6frmda252 if your first box plays that well your off to a great start...keep at it and have fun with it most importantly...
🥶🥶🥶💯💪
That box looks legit. Maybe round the port more.
What kind of high to low adapter are you using?
Not sure but check Idatalink for a kit to swap in an aftermarket deck. It will have a t harness as well that plugs into the OBD2 port so any factory controls integrated into the stock deck will be retained if the new deck is compatible like the nice Kenwood. If you keep the stock deck maybe use the Audio control thing to get the best high to low adapter plus more.
Look bro dnt know how much experience you got, due to the lack of audio content on your channel but I give my customers what the ask for and what they can afford.Fyi I'm using a lci converter,I really have a problem negativity on my channel.
@@blazed7785 I used to do car audio for a living. Its just a hobby these days since the industry is shit where I live. The RCA converter really does make a difference but most amps have a line converter built in. You could run your speaker wires to the amp directly if it has that option just to compare how the line converter is doing. A more expensive converter would be like the LC2i. I know that the audio control(not sure which one) can convert the speaker wires to RCA’s but more importantly also has a line driver built in so you can also get 4 volts out of the RCA at the amp.
As far as the negative comment go. I didnt think I was being negative at all. Just wanted to throw a little knowledge your way. Sounds like you already have the audio control converter but check and see if it also has a line driver. Also, if you dont have haters that usually means your channel is also not growing!
@@Trucker-Belly look brah again miss me with this...I'm not the one you wanna do this with,dnt care about channel growth or none of that sh_t,I'm tell you that,big head, know it all guys, hater 's ect...I dnt need ....hate to come out hunting just cause you feeling Brody...find someone else that needs your sh_t last ⚠️
How much are those subs rated RMS?