Can you patch a hole in an oil pan with RTV? Not JB WELD but RTV? Let's find out!
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2020
- In this video I show what a few minutes of play time, a tube of silicone, an idea and a junk car gets you when you have a hole in the oil pan.
My young Kings were having a grand ole time while daddy tried to figure out how to move this car without cranking up the tow truck.
This was an experiment that was random but perfect because I always wanted to know if it could work either way.
I wouldn't try this on a block per se as I mentioned in the video because the pressures will be way to high to maintain stability.
I hope you enjoy, Like share subscribe and visit us at Seasallauto.com for information, products and services.
Follow us on IG@ Seasallauto
Facebook @ Seasall, LLC
Homesite: Seasallauto.com - ยานยนต์และพาหนะ
![[EP.01] ดูฟรึตอนแรก LOL: Last One Laughing Thailand Thailand หัวเราะทีหลังปังกว่า | Prime Thailand](http://i.ytimg.com/vi/t4KunBRKn3s/mqdefault.jpg)
This is such a cool video. I cant wait to check out the other. Thanks for sharing man and keep up the good work.✌️
This was super experimental and i sincerely appreciate it
"In the name of science" Love it man!!
Dude, I need this because I cant lift my engine to get the oil pan out (2003 Grand Am) no hoist and no extra money.... sad life. A ratchet strap in the road put a hole in my oil pan and my transmission pan.... FML.... but I am going to try this and I'll let you know. I've been searching for hours to find someone to show me something I can do in my situation, and here you are....Maybe even make my own video to show people that don't have funds or friends to help can still find a way to keep on going without this ruining a chunk of their life with no car. I love you dude!! Thank you, I am grateful!!
It worked great!!!
@@jamespedersonchaysendestyn2042 did it last long?
Awesome, great result
You are such a cool guy, thanks for the video
I appreciate the love 🙌🏿
I love this guys parenting! Good job brotha. #GoodDadGang
Hey I sincerely appreciate it it's definitely a lot harder than it looks but only a parent would understand thank you again 🙌🏿
Thank you bro ima try this on my ole lady car tmr she ran up ona curb hit a rock n it’s a decent size hole in oil pan 😢 hopefully it works man ✊🏾
Thank you for your time, I enjoyed your video, but my advice is not to get under the car without a jack stand, hydraulic jacks , when the seals go bad, they drop , sometimes , slowly and sometimes rapidly,
And I love children, but they shouldn't be in a work area, specially if it's not100% safe proof, but like i said thank for the information it is vary helpful, be well
Thanks for this video helped me today
I actually found out that our TV works better than J-B Weld. J-B Weld will eventually cracked and you would have to patch over it again and again and again. Our TV is flexible and is high temperature rated also the ultrablack is oil resistant. So is the perfect sealant for a crack or hole if the hole is not too big
I didn't think of that I would definitely look into it in the event this happens again
our tv? Ha ha. Darn hillbillies
my tv is way too big. i think it is 32 inches.
That RVT!
I've tried that steel stick on my transmission before and it worked fine until I swapped transmissions I think I lost 3rd but it still was working fine besides no third, this time I have a hole the size of my fist about so I'm thinking jb weld steel stick and rtv for this one I'm pretty sure it will work hopefully or I'm screwed !!!
Man it depends on how big that hole is that's crazy if you have something the size of your fist I don't know what you're going to do but you can try even cutting a piece of metal and having it welded on or silicone that piece of metal in there which is extremely gangster but can work if it doesn't hit extreme pressures. This does work but it's also not a long-term fix it was just something temporary but hopefully it works out on your end thanks for the comment 🙌🏿
Did u fix it?
Did you ever get your fist size hole fixed.
Interesting video 🤣🤣🤣. How is it holding up now honestly. Support from the UK👍🏼
Hey shout out to the UK!!! Nearly 2 years man and is not even a drip it actually held way better than I thought 🤣🤣
Yo bro plz respond to me can you give me the exact time of product you used cuz i got 1 but idk if i got the wrong 1
Hey sorry for the late reply, shoot me an email at Seasallauto@yahoo.com
CaveNiggie: wow imma try that shit tomorrow!!!! How long did it end up holding for ya....?
It's been about 3 months and it's still going strong 🤣 I will say J-B weld is probably a better solution I just did not have any available silicone works though. I also let it sit for 24 hours
Pat Seaser hey bud, I had some high temp Red RTV and some fine metal screen. I hit the area with some brake clean and some 80grit sand paper. I gooped up a good amount of the RTV and covered the area with about 3/4 of an inch extra on all sides squared up nice. I then took square pieces of screen and laid them up over the hole I was patching. As I laid up more and more pieces of screen I applied more RTV. I still have a decent amount of RTV but I want to wait until the few screens and RTV set and dry. It was working well. Very similar to fiber glass lay up on a surf board to carbon fiber. I know it sounds rigged but it seems to be working so far. I don’t have a good lift so trying to take out the secondary aluminum oil pan under the crank would involve so many parts to be removed which is next to impossible with the tires only inches off the ground. I also have to tig fill the down pipe exhaust coming off the exhaust manifold.
All of this because some genius that was moving it at the auction yard didnt consider the indefinite damage that would occur while lifting the car with a forklift from under the front end right against the exhaust. The exhaust flange punches through the crank case/2nd oil pan.
I hope that it worked out for you it should have did you end up having a leak after it was done or did it fix the problem for you?
Pat Seaser we haven’t put oil in it yet. Waiting until it completely drys. We used two full tubes of red high temp... hope it works.
@@dustinmoto425 4
That’s cool
But hey brother please,safety first can you always use a jack stand under the car ?thanks brother
Sorry I don’t give you toms up ☝️
Hey thank you for the comment I appreciate the input I will go back and verify but I'm pretty sure I had a jack stand underneath the car if so go back and like the video the second time around 😅
have a hole in my transmission pan i patch it up with high temp rtv find out tomorrow if it will work
Hey how did it go?
@@Fasttowpro it work no leaks put i have to drop the pan again i am geting a po758 and po704 so i am going to replace all the solenoids also have to replace the safety neutral switch it wont start unless i bypass it
Use thicker oil on high mileage engines. They are more worn out inside. They will burn the newer car thin oil.
Your kids are adorable but I have to say just holding that car up with a jack that has the handle still attached to it with babies running around it could cause for a really big accident I think you should put jack stands underneath or blocks just in case just to be on the safe side no disrespect I'm just saying safe to sorry but love your video
Hey no disrespect taken you're absolutely right and I'm always practicing what I preach I don't know how this one slip through the cracks but normally I'm double jacked up and jack stands 😅 but hey when I'm wrong I'm wrong call me out so I can do better next time I appreciate the comment 🙌🏿
I did not mean to offend you if I did I am sorry I have done the same thing but one time I had my vehicle jacked up with my floor jack so happens I win the house to get something to drink when when I came back out of the house I just checked my truck off and I was going to take the tire off a before I did I went to the house to get something to drink and when I came back out my truck was no longer jacked thank God that I did not take the tire off the vehicle and I was not under vehicle with the tire off because I would have been smashed on the ground and there would be nobody to come help me or maybe able to call anybody for help if I could so you see I was not trying to be offending you or anything so I hopefully you understand where I'm coming from I just want to make sure because I was lucky enough that it did not happen to me I would hate to happen to anybody
dangerous way to access under a vehicle, a jack but no jack stand or safety DEVICE for the mechanic if jack fails
I'm gonna try this on my charger today.... I'll come back if I remember the video. I'll definitely vlog it like everything else
#SubscribeToMeForDailyUploads
I'd love to know how this worked out for you, get back at me when you can Seasallauto@yahoo.com
@@Fasttowpro I'm doing it right now and vlogging. Emptied the pan, sprayed it down, sanded with 80-100 grit, sprayed, sanded, shoved some rtv in the pinhole/around/on top of.. heat gun to speed up drying .... 10mins on/off ...doing a second layer now .. it'll be up in a few weeks. Gotta finish uploading the rest of the videos 😅
@@Fasttowpro Currently 2 weeks later. No leaks from the patch. I have a youtube video going up in a few more weeks in reference to it. I'm using it as a temp solution. Ive already obtained a new pan since I Race, Drift, and Drive hard. I appreciate you doing this. It helped me out a lot!
Yo I'm just saying this message praises to the most high it worked and it still working super stoked to hear it 💪🏿✌🏿 I sincerely appreciate you getting back to me as well that is super awesome if you ever have a race event in Sebring Florida because we drift down here too get at me 🙌🏿😎
@@Fasttowpro still running strong.
Will do. Hopefully I get down there next year permanently! 🤞🏾