ฝัง
- เผยแพร่เมื่อ 11 พ.ค. 2009
- Ampeg's Dino Monoxelos explains the importance of using the mono bridged cable with your SVT 4 PRO and B4R. Also explains the importance of using Neutrik Speakon speaker connectors used most of today's high powered bass amps.
- เพลง
thank you buddy i was trying to work out how 2 connnect it to my amp for 20mins now i do thamks to this video thumbs up from me...
on the back of the svt 7 pro , what is the aux stereo input ( rca input ) used for???
hi do you know if you can run a 1/4 inch speaker cable from power amp A into a 4x10 bass cabinet that has a handling of 300 watts at 8 ohms?
Thanks!
Hey Dino, do you recommend using a mono bridged cable for other Ampeg amps as well? I just recently acquired a SVT-2 pro, however I'm still in the hunt for a cabinet and a cable. I plan on using the speakon output on the amp as I've heard great things about them. Any other advice you can give me on these cables would be great as well
Thanks,
Andy
What kind of speakon cable would you recommend for a B2RE amp?
Im thinking about getting the B4R head, would it pair well with the Ampeg 8x10?
Hi, what is POS and NEG? 1+ Neg and 2+ Pos?
Just saw a revised [5/12] version of the manual which has the 'bridged mono' center jack wired 1+, 1-; I wonder if they changed it because hooking up the wrong cable causes damage--like what I see on the older '1+, 2+' model on my bench, which was hooked up with a std 1+ 1- cable...I guess acesblackvideos has a newer amp, and a 1+ 2+ cable would have simply not worked.
How about the 8 Pro?
On my S4 Pro, if I'm running two cabinets "dual mono" should I use two mono bridge cables or two regular wired Neutrik cables
they'd probably recommend neutrik but it doesn't matter.
Live your demos about everything Ampeg.
Just bought a brand new version of the SVT4Pro and would love to see an updated video about this stunning head…. Some features and settings have been updated. Eg No mono bridge cable required now.
i have a crown xti 2000 and a jbl mp255s sub ,they take speakon cable i whant to bridge it so i can get the most out the amp how can i do this with
+jay wreak You'll want to get in touch with Crown/JBL so they can help you out with those products.
on an svt4pro
The 810 runs an AVERAGE of 800 Watts. There will be certain peaks that go above 800 Watts, so having an amp that has more than 800 Watts can withstand those peaks. But since it is 200 Watts more, don't crank it up too much or you'll damage your speakers since your amp is pushing more power into the cabinet.
Why the hell are these things so hard to find and when you do find them they are over $120.
hay i have run 15000 watts with thim on subs box and my top boxs 5000 on mid,s and 800 om hi,s take 4 box 1200 watts on mid,s 16 OHM,s hi,s600 watts RMS sub,s MTL 4,s 4800 RMS 2 per amp V12 and MA 500 VZ on hi,s MA 1200VZ
isn't that 200W to much though?
What are you talking about with tip and sleeve? you mean red and black/pos and neg? Would have been much easier to follow what you were talking about with a wiring diagram. I cannot seem to find a wiring diagram anywhere. how hard can it be?!? two wires!
Tip and sleeve refers to 1/4" TS cables. The kind that headphones and electric guitars used.
Neutrik "new-trick"
hay i have run 15000 watts with thim on subs box and my top boxs 5000 on mid,s and 800 on hi,s take 4 box 1200 watts on mid,s 16 OHM,s hi,s600 watts RMS sub,s MTL 4,s 4800 RMS 2 per amp V12 and MA 500 VZ on hi,s MA 1200VZ