Creality Ender 3 S1 PRO Review! Is it worth the Price?
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2022
- Creality just dropped another 3D Printer on us. The Ender 3 S1 Pro. But is it worth the price? Check out my review here to find out!
Clockspring 3D: / clockspring3d
Creality Ender 3 S1 Pro from Amazon: amzn.to/3IsshIL
Amazon Link 2: amzn.to/3Df5OOB
Pergear link: www.pergear.com/products/crea...
Join this channel to get access to perks:
/ @theedgeoftech
🛑 Subscribe for more: www.TH-cam.com/theedgeoftech...
🎥 Video Editing done by Caleb Fairres: www.calebfairres.com
SPONSOR LINKS
Save money by using my discount code TEOT5 on the TH3D Website: www.th3dstudio.com/product-ca...
3D PRINTERS, TOOLS & MATERIALS (affiliate)
TH3D: www.th3dstudio.com/shop/?share...
FDM 3D Printers: www.amazon.com/shop/theedgeof...
Resin 3D Printers: www.amazon.com/shop/theedgeof...
Laser Stuff: www.amazon.com/shop/theedgeof...
3D Printing Filament: www.amazon.com/shop/theedgeof...
3D Printing Tools: www.amazon.com/shop/theedgeof...
3D Printers and Parts from Creality Direct: www.creality3dofficial.com?sca_ref=14184.gw5rXaIv7L
🛒 My favorite tools/materials on our Amazon page: www.amazon.com/shop/theedgeof...
Want more Edge of Tech videos? We go live every Monday Night on Hotmakes!
📺 HotMakes live streams: / @hotmakeslive
SOCIAL/SUPPORT LINKS
💵 Patreon: / theedgeoftech
💲 PayPal: paypal.me/theedgeoftec
📸 Instagram: / theedgeoftech
📣 Twitter: @theedgeofteck
💬 Discord: / discord
👽 Facebook: TheEdgeofTechOfficial
🎥 FILMING GEAR (affiliate)
www.amazon.com/shop/theedgeof...
Music by Wicked Realm
Album - No More Fairy Tales
Song - Feed
/ @wickedrealm5507
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
where can I pick up that awesome chalice STL you printed in this video?
I just updated the description, but www.patreon.com/clockspring3D is where you can find it! It's 100% worth it! Thanks for the heads up, because I thought I put it in the description!.
love the major upgrade in camera quality. you've put in so much hard work over the years
Thanks! I appreciate the feedback and thank you for watching!
I think the bed heater insulation should count as another feature, it makes a big difference in time to heat, higher temperature, as well as providing some energy savings.
Very good point!
If you're talking about a laser attachment, it would be a diode. That will not etch or engrave metal. It might mark it if you put something over the metal first and burn it in. But diodes are not good for metal.
@@TheEdgeofTech No, Look at the words I used: The additional insulation on the heated bed should count as a feature. The original S1 does not have the extra insulation so has a harder time reaching high temperature, and uses more energy to keep it there.
@@TheEdgeofTechthe 10W laser can indeed etch steel and even cut aluminum and thin steel
My first 3D printer was a Thing-O-Matic, which didn't last too long. My second was a Printrbot, which was more reliable. My third was a Creality Ender3v2, which was a vast improvement. I eventually added a direct drive and a BLTouch. I recently got the Ender 3S1 Pro, and it is by far the best printer I have ever had. All the.things you mentioned are what I love about it. It is the most reliable and foolproof printer I've ever used. Mine is connected to Octoprint and has become a workhorse. Yes, it was a bit pricey, but it has been worth it considering how much time I don't have to waste tinkering with it to make it work right.
I was considering buying it thank you for your experience
Great review Jim! Thank you so much.
I just got the Ender 3 S 1 Pro printer three days ago and loving it! This is my second 3 D printer. My first printer is an Ender 3 V 2 which I bought about 8 month ago but since then modified it with a metal extruder, replace the hot end to a Micro Swiss all metal hot end, changed the springs for the bed, upgraded the Bowden tube, added a light on top, added a Raspberry pi 4 with a Logitech 270 webcam that I also modified to be able to change the focus settings. I just purchased a BL touch for auto leveling ( I need to install it). All in all I have spent much more on the old Ender 3V2 with all the upgrades. In addition the time time I spent installing them were significant. I have a better printer for less in the new Ender 3S 1 Pro. In addition the installation of the Ender 3 S 1 Pro is much easier and quicker than the Ender 3V2.
I just ordered another raspberry pi 4 and anther Logitech webcam that I need to install when it arrives Net Wednesday.
I originally thought of attempting to install both printers and both webcam on the same Raspberry pi 4 but I have heard that it could be problematic both on the the same raspberry Pi .
The raspberry pi are in short supply.
I am looking forward ti seeing your video when you post it how to unclog the Ender 3 S 1 Pro!
Thanks for all your great content!
Wow! It sounds like your V2 is a beast!! Glad you're loving the Pro too! Thanks for watching!
Kool you did the exact thing i was thinking of doing. I will not get the v2 and upgrade it, when the s1 pro is cheaper then upgrading you self.
Eduardo, this was my exact journey in the world of 3D printing.. did everything you mentioned barring the BL touch on my first Ender 3 V2.. and yes agree that although fun, the time and money saving for printer #2 is a real pleasure.
What is the purpose of the raspberry 4 and Webcam???
I just made this purchase as my first 3d printer and I’m excited to get started. I also want to learn the design side of cad. I work with cad drawings every day as a welder but never really got into it so it will be a learning experience.
Man oh man another Ender model. Looks good and wild to see another variation. But a lot packed into this one! Great review mate
Yup! Another one! Haha 🤣 Thanks for watching!
love your stuff...keep it up!
I have the regular Ender 3 Pro and it has been good but it is time for a small upgrade. I am a mechanical engineer and I 3d print a lot of prototypes, hopefully the S1 Pro works well for me.
I bought this printer and love. The only complaint I have is the interface in non intuitive. One thing that I've not seen any comments on is that the build bed measures out at 235mm. 15mm more than they advertise. Has anyone changed the firmware to account for this and did it work out for you.
Awesome review. I'd like to know the print settings cuz I've been facing serious stringing issues on this printer. Please help!
Great review so i started with a flashfordge finder and i have it printing very nice for me im wanting a larger build plate so besides that does this printer print better than the finder ? im still new sorry
Great video! Also the studio is looking great 🔥
Thanks man! It's a work in progress, but I'm liking where it's going! Can't wait to get some cool stuff on the shelves behind me!
@@TheEdgeofTech looking forward to seeing the end result. The camera is looking super crisp and the lighting is looking killer though. 😊
@@ModBotArmy Thank you! I've been working hard to try to dial that stuff in, and had some help from a friend of mine recently! @Grim Granite Thanks for your help!
After having the OG Ender 3 since release in 2018 and fully upgraded it, I wanted a second one for my FDM printing (mostly resin printing nowadays - 4 Elegoo Mars Pro's , 1 Elegoo Mars 3 & 1 Elegoo Saturn 2). I chose the Ender 3 S1 Pro because I don't have the patience & time to upgrade anymore. It has been great since I bought it, only downside I found is the printer profile isn't in Cura yet. But with a bit of tweaking I got it up to the same quality of my fully upgraded Ender 3. Great video and review!
thats a good idea you said about the light, I wish they had done that
This is exactly what I've been waiting for.
Looking at getting a printer for some prototyping and eventually manufacturing of items as a form of side work. Would you recommend the ender 3 s1 pro or taking the chance with Bambu Lab
I just got my 2nd S1 the other day as I couldn't find this one is stock at the time. I'll have to grab one soon!! Great review.
Awesome! Both are great machines, and I have had good luck with them! I am assuming you have too if you just ordered another one!
You forgot the upgraded bed: it goes up to 110°C and is insulated (vs the un-insulated 100°C of the standard S1). I have to say, I did not consider how nice RGB leds could be for a printer, but your ideas for color-coded indications using the lightbar are REALLY cool. I would still like a simple on/off option on the bar, but a button instead of a switch would allow for the light to be managed by the board and still retain the manual control.
@@customfabricationcreations8294 The HOTEND goes to 300°C. The BED goes to 110°C. And adds a layer of insulation.
Do anyone know if anyone made a list where all the features of this printer is added to the ender 3 pro or ender 3 v2?
I am intrested in all the upgrades that provide more build quality, speed, stability, safety and reliability. That is pretty much everything else then the display. I plan to remote to the printer, either by using a laptop, RPi or something else.
Edit: Almost forgot i have a disassembled laptop laying around, that had its display crushed and was thinking to reuse the parts.
Hi between this and the Ender 5 pro, which one would you recommend to get for a beginner?
Just ordered this one. Subcribed!
Thinking about the pro but also considering the plus version. Which one would you choose?
Top content Jim!
Thanks Sam! Now I need to work on epic intros like you have!
Jim You Rock. Great videos, this one as well 👍🙏♥️
Where do you connect the laser cable if you want to install one? thank you!
2:47, where can I get the "Fullamint?" Matte Black filament? Looks nice.
Great vid! It worries me a bit that it clogged on the third print. What temperature were you using?
I'm thinking of getting one and immediately adding thermal paste to better interface the heat real with the heatsink.
Yeah I was a little concerned, but I'm not sure exactly what happened. I know the filament got stuck in there and when I posted the video of me fixing it you'll see how it was stuck. Never seen one do that so I think it was a fluke!
Thanks again for watching!
My ender 3 s1 (not pro) clogged on the 6th print. It was a bit of a pain to clear it but it's ran flawlessly since, 61 prints without clogging again. The same file that was printing on the first clog prints great now, must have been gremlins?
I don't have an Ender 3S1/Pro but do use several all metal titanium heatbreaks.
Add an oiler/filament cleaner when printing with PLA to help prevent clogs. Use a high smoke temperature oil. I prefer virgin avocado oil because of the very high smoke temperature it has and add 3-5 drops of oil to the oiler sponge.
Great advice! I'm definitely going to have to try this for sure! I wonder if that's what cost my jam?
Great advice! I'm definitely going to have to try this for sure! I wonder if that's what cost my jam?
Don't have a printer yet, this is the unit I am going with. I don't want to keep chasing upgrades and such, this fits the bill right out of the box. Thanks for a great vid, subscribed!!
you stil like the machine or?
@@itzmemaariocleantaps8201 I actually went with Sovol SV06 machines. They have been stellar.
This video made my mind.. Was originally going for the Ender 3 v2, but this sounds way more like what i want...
Loved the review! New subscriber here too! I'm looking into getting into the 3D Printing world. I delayed purchasing the regular S1 when I heard about the pro, just that it's not yet available in South Africa, so waiting on that to get the PRO version. One question I have, I'm a bit conflicted between the S1 Pro and CR-10 Smart Pro due to the bigger print volume of the CR-10 Smart Pro, so if possible. I would like to hear your thoughts on how the S1 Pro compares to the CR-10 Smart Pro.
Thanks
Awesome! Thank you for subscribing and welcome to the channel! To be fair, I don't have a CR10 S Pro to compare it to, but if it's in your budget and you want the bigger build volume, I would definitely consider it for your list. I can only speak to what I've tested and I really like this one! But, that one is probably pretty solid too as they are very similar printers!
@@TheEdgeofTech Great stuff! Would also think they are similar. On a second thought I think the S1 Pro is a better choice for me. I'm new to 3D Printing and so might need to learn from others, going with one that is widely used by the community will then help as others would possibly have also encountered what I encounter. I have no specific reason for the bigger volume at this stage, but if that need arises I can just sell the S1 Pro and use the proceeds to fund the CR 10 Smart Pro
between the Creality Ender 3 S1-pro and the Anycubic Kobra 2 which one is better to buy at the moment?
I really like this new ender s1 but i have fully upgraded ender 3 pro, glass bed, stiffer springs, silent motherboard, BL touch, all metal extruder, high quailty borden tube and fittings and it prints flawless but if i was start new this would be the one id go with, that built in light is really nice tbo
I didn't know Borden makes tubes I thought they only make milk.
@@foam27 sorry lol i ment bowden tube
Can you share what settings you used for this printer I have this printer and my prints are stringy and some of my prints are turning out not the best in quality
I want to upgrade my ender 3 pro to a ender s1 pro and also their new upgraded screen. Would I need a new main board for the ender s1pro. I’m guessing you can’t use the creality 4.2.7 or 4.2.2. Thanks
im buying it asap.Got to save a few bucks...Thaks for the review bro,i subd and 👍👍
Which one is right?
1. Z offset > 5 point offset > auto bed level
2. Auto bed level > z offset > 5 point offset
3. Auto bed level > 5 point offset > Z offset
I cant seem get the perfect first layer adhesion whicever i use.
And increment of 0.05 on z offset is awful
I regret letting go my S1 and buying S1 pro
Will the S1 Pro engrave metal ? Or does it look more like etching ?
Jim.. did you ever get the torture castle to print?
Best 3d printer channel
@the edge of tech - Any comments on the auto bed leveling feature? It's been reported by many users online not to work with the current firmware, and everyone is having to resort to manual/auxiliary bed levelling
Hey fan from Oz here, thanks for your content, I have a standard S1 with the S1 pro hotend and was loving this of course until yesterday when I had a boo boo and shorted my part fan wiring, and now I am pretty confident my motherboard (F4) is actually cactus as I can't get it to run even with that board disconnected. I was running klipper yesterday but the board wont flash anything I can't go backward, forwards or sideways, I've tried the embedded in folders in root and changing file names). The sales guy I talked to suggested I look into other motherboard options rather than the creality... so any suggestions? and go....
I like the TH3D boards! Sorry to hear about your board, and I hope you get it fixed soon!
I have been trying to print the rift bowl like yours but I can’t quite get the settings right what settings you use if you don’t mind me asking
Thanks.
Is that really "Pro" version? Can you adjust PID parameters on that touchscreen? I mean does that interface allows all the same features as "old" 12864 LCD?
Ok, in 2022 they at last installed full metal heatbreak. But what about printing composites (I mean wearing) - what type of heatbreak it uses?
that is a question of maintainability. And what about its upgradeability - what about stepper drivers and MCU - is all of them 2208 and what abou LA support? Does MCU have the same controller with 256 flash as in non-pro version? It is essential to enable LA (of course if E driver is not 2208, wich could fail with LA). What features (except Sprite extruder) that really can influence printing characteristics it have relative to more than twice cheaper Ender 3 Pro?
Get Ender 3 (original or Pro), motherboard with 2209 drivers and any ready-made direct extruder (even Sprite ok) with hardened steel nozzle - and you will get much more "Pro" features that can widen range of materials (especially composites - luminous plastic is also abrasive), increase speed and quality of your prints, for much less than $400.
How about the memory chip? Upgraded to 512? Or the cheapest 256?
Rgb lights and wifi support would make it superb
Right! Heck ya!
Jim wanting to spend around 350/500 hey old bud what should I buy? And think about our great days at your apartment in Hartford playing xbox. . Give me your best opinion
I only paid $399 for my first S1 (I have 4 in my farm that I paid $229(refurbished) - $339 for the last two from the 8th anniversary sale) and $407 for the S1 Pro (also the anniversary sale). I have KP3S to Voron 2.4s, and my S1's are slice, print, and forget once I upgraded them to Klipper. They make me enough money to pay for themselves. I plan to add at least ~10 more this year, but will likely stick with the S1 standard, but that will depend on sales this year.
This or the ender 5 pro.? I cant decide. I had to return a defective one and im gonna get one of the 2 As my replacement. Which prints better?
Does the lamp have anything to do with heating to avoid shrinkage?
As someone who thinks RGB is extremely over-rated. I love the white LED.
I agree! But I would love to see it in RGB too! haha
@@TheEdgeofTech For sure, having options is always good.
My issue is that after a few hours down the line, mid print, the extruder stops extruding. No clogging. Just direct drive gear marks on the filament and the black outer gear wheel making tak tak noise and vibrating. Using pla, at 200deg, 0.3 layer, 0.8 retraction. SHOULD i release the gear spring tension screw of the filament feeder knob? Please help. Ender 3s1pro
Can you do a laser video of the S1 pro I have brought the laser head but not used it don't know how to thanks
Is the CR-10 Pro just as good of a choice as this one? Will it do everything the Enders 3 S1 PRO Do?
First I want to say I love your reviews, Love them!!!!!!
So now I have a question for you Sir
What do you think is the "Best Printing" printer that Creality has put out?
I ask this as I bought the CR6 and was not happy as it broke after just 2 months of printing I installed a new board and it only went another 3 months
So I would like to hear your thoughts on the Best Printing Printer from Creality.
I look forward to your answer and I thank you for all your videos and the help they provided me.
Thanks!! I appreciate you watching! That's a really tricky question as I don't know what you are looking for as far as budget, build area, etc. I have been impressed with this one, but also really like the Ender 2 Pro.
@@TheEdgeofTech thanks for the help I have a enders V2 had the CVR6 but couldn't keep it running now just sent for the new 3s1 pro and I'm sure I'll love the new hot end I could of just bought the hot end for my V2 as it has all the other features but now it'll have a rest between prints as it runs just about 24/7 once more love the channel and thanks
Jim, great explanation of who should buy this printer, and why it is priced and equipped for them. Creality seems to be all over the place on the Ender 3 series which makes it hard for a first time buyer to decide. This is also getting into the price range of the Ender 5 Plus which offers a much bigger print volume.
Really like the new studio and lighting, now you need to fill up the shelves!
Thanks for watching David! I wish they would focus on a couple of flagship models and make it easier on the newcomer! And also, yes I need to fill the shelves lol
We just bought this one (prime day) without much research, glad it seems decent one!
got mine from a local micro center for 150!!
Is there software with preset prints. I need to do interior parts for my car.
I ordered one of these today for $399 and a Sonic Pad. Can't wait.
When will you review the ender 3 s1 plus?
Can you use the Laser componet on this model?
I just got the Creality CR-10 priced at 479, bigger build area, taller, touch screen, bed leveling. I do not think I would buy an Ender 3 for 499. It looks nice, but a small build area is a step down. My other is a large build area also Ender 5.
Oh I love my Cr-10 I took the original Cr-10 and made it 1000mm was a fun project !!
That's a great deal! Well this is a new generation of printer, with a new board and newer parts, if you're looking for a bigger printer, you went the right direction! Thanks for watching!
That sounds like an awesome project!
Total noob question - When making a bowls does it need support point as it making the bowl ?
Will this print 28mm miniatures well?
I’m fresh into looking at printers and I’m looking for one to mass produce miniatures basically
Probably want to put a smaller nozzle like a .2mm nozzle on, but it would be ok for that. But if you want even better results and higher resolution, I would go with Resin printing. You can print several on the same bed, at the same time as one could be printed because it printed the whole plate at once. So in resin if it would take 3 hours to do 1 mini, you could load 15 up in the same plate and it would still be only 3 hours.
@@TheEdgeofTech any recommendations?
@@KnockoutKingable resin is much more messy and has a little more prep after it's done. But definitely better for miniatures. I will be unboxing the Creality Halot Mage Pro this coming week and it's very promising. The Elgoo Saturn's are nice and have a larger build area too. I would check out the newer one of those. The Mage Pro is an 8k printer and is supposed to be fast too.
Yet another Creality Ender model!, I wish Creality would do something about their GUI's on their touchscreens, they just don't have enough of the Marlin controls on there with just the bare minimum to run the printer, why don't they write some software to let us easily add new menu items to their GUI? sure I can plug in a laptop and send g-code direct to the printer or plug in a Pi and run Ocoprint, why don't they make the screens Pi compatible?
And while I am at it why don't they just spend the money they use on designing a dozen machines each year on a range of say four machines with better quality parts and develop those machines a la Prusa style.
It seems as though once the community has figured out the shortcomings of a particular model that Creality just releases something new instead of fixing the problems of previous models.
However! this machine on first sight seems to have not been redesigned by the suits in marketing, lets hope that they have fixed the QA department as well which is one of the reasons Naomi Wu parted company with them
All very valid points! Thanks for watching. Andrew!
Good points. I was thinking the same thing Creality vs Prusa. Creality seems to have a contest to see how many models they can release, while Prusa seems to never have anything new, even now the XL has no final form and no release date. I pre-ordered a XL, but in the mean time ordered a second Rat Rig.
@@woodwaker1 I too have my name down for an XL and cant wait to get my mits on it, I went against the grain and built a Pro 3D V-King 400 last year from self sourced parts, I chose this way as originally I was going to build a Voron but the kits were never 100% in stock and many parts had to be upgraded due to bad quality, a combination of this and the Voron Nazis made me choose the Pro 3D design
@@AndrewAHayes That's why I went with the first Rat Rig a 400 cube. They are a little expensive, but the components are top notch. I have a 500 on order and should get it in May. The XL looks great, but want to see more and get specifics on exactly what it is, probably won't ship this year.
So all things considered from the standard ender 3 to the cr-10, what would be your choice for a first machine?
Ooh Good question. If it's your first printer, and had the budget, I would say this would be good to start with. If you are in to tinkering and upgrading, an Ender 3 Pro is still very solid, and I really like the Ender 2 Pro if you want a smaller cheaper machine that prints very good, to get into the hobby!
@@TheEdgeofTech is this printer stil good printer in 2023 juni for beginner?
LED is not RBG? Is that really expected?
is there a profile for simplicity 3d yet ?
I like your thoughts on the RGB lighting.. but you realize thats more that could go wrong, or that would add an additional cost of probably $100 or more. I get an Arduino and some lights and coding, but to mass produce etc.
Not sure I agree with you. I could get the EZNEO lite TH3D and run it from this board. That would be like $20. Stay tuned for a video, it's coming! :-) Thank you for watching and I appreciate the feedback too!
Check E3 S1/Pro Y motor temp during printing. You'll probably find its very hot
You want an RGB light bar on your printer.. hahah love it!
Lightning deal on Amazon. Does it comes with filaments?
comes with a small bit of white PLA
Can you put fonts on the item as well
There's another reason to go for the already upgraded printer and not do it yourself. Not everybody lives in the US, or have access Amazon, if I want to do all the upgrades it will cost me a lot more, even buying for a local retailer, or buying overseas and paying a lot for shipping and taxes.
I got the pro version locally for just $80 more than de no pro, it's a no-brainer for me
Great point! Not everybody has the same access, or pricing and it definitely helps when you can get it all together and save money! Thanks for watching!
You bring up a great point. I upgrade my printers all of the time and when I need supplies for projects, turn to Amazon. I don't know where to source many of the parts I get from them usually in a day or two at a reasonable price with no shipping charge.
I purchased an Ender 3 S1 Pro last week, received it on Monday and I'm having one hell of a time getting things to stick to the PEI Build Plate. I've tried just about everything except sanding the PEI. I've cleaned it with 99% Isopropyl Alcohol, using 200 for the filament temp and I've increased form 60 to 65 for the bed temp. I'm also using Hatchbox PLA and just can't really get anything to stick. If you don't mind sharing your S1 Settings, What Slicer You're using and any specific settings? How do you prepare your PEI Build Plate? Thanks so much.
try 0.28 initial layer height and up the bed temp to 70. try and when you clean with alcohol do you let it dry by turning the bed temp on then turn the nozzle temp up.
Sir i am really into idea of cr 10 smart pro pls make video about that it will be really helpful as there nothing much information stuff is given about this new printer it will help me a lot
I appreciate the feedback! I don't have one of those to review, but let me see if I can get one. Thank you for watching!
I got one today with “combo” of two spools and five tips with 10% code from creality for $454 shipped. Looking forward to it.
My first 3D printer purchase, and the first couple of prints went really well. On the third print the nozzle seemed to far from the bed, even after using the Auto levelling feature, so a bit of manual fine tuning was needed. A bit too early to see if this is a common problem, or just me! as the printer is new to the market. I'm learning all the time, great channel 👍🏽
Great to know! It's hard to tell what would cause that because this printer still has the springs on it. So if any of those moved a little bit it would cause that issue. Amongst other things that could cause it. That's the first thing that comes to my mind!
@@TheEdgeofTech I have an Ender 5 Pro. Same thing, printed fine in the beginning but now I can’t get the prints to stick. I’m a total noob and now the machine just sits collecting dust!
@@MabasCommunications oh no! What build service do you have?
@@TheEdgeofTech 1.70.1 BL?
i love it i ordered one today but i wish they had one version bigger size (400 XL) so i am going to wait once they extender kit ready on sale
That would be awesome if this was bigger! I hope you love it!
@@TheEdgeofTech yes thanks to the way you presented it, i am sure its going to be my best accurate printer, as for size maybe extender kit or IDEX or big size will be my next purchase
I just ordered this printer(My first printer ever) From Creality for $410. Should be here next week. I'm excited to get learning
end did you like the machine or?
@@itzmemaariocleantaps8201 yes. It's outstanding
The amazon link for this doesn't ship till June and the Creality site is only taking preorders.
Did you check the Pergear link?!
@@TheEdgeofTech ships end of may. Ill wait for it.
Somehow I have managed to snag the Pro during Creality's anniversary flash sale, and I feel like it was truly just luck that I saw it. To say I am excited is an understatement.... it'll be about a month before it's here though.
how much was it on sale for
@@Nicknasty420 Supposed to ship any day now... I got it for 407, plus local taxes, no extra shipping fee.
@@ashvanes484 They must have a different idea of what "Anniversary" means because I just got the S1 Pro also on a "Flash Sale" for $407. I bought it on Saturday and it's supposed to arrive this Thursday.
Just got this 3d printer for $259 brand new!
I paid just over $400 for the S1 PRO shipped to the house. My main comment is -- I'm paralyzed on the left from head to toe and I was still able to assemble in a reasonable amount of time. I don't have instructions to install the z limit switch (which was included) or why it needs to be installed?
Wow! That's awesome! You don't need to use the Z limit switch because it has a CRTouch. They give it to you just in case you ever remove the CRTouch.
@@TheEdgeofTech Thank you for the info. I wouldn't start up because I didn't know.
Not gonna lie, love the review. If nit picking the light not being RGB is all you can find wrong, that’s pretty good.
Anybody know if the toaster print worked the second time?
It looked like the matte black lid had some zits on the lower edge
I'll check your channel you try out any anycubic machines?
Why are your shelves so empty? Thanks for the videos!
Haha 🤣 because I just put them up right before this video! Need to start filling them now :-) Thanks for watching John!
what do i have to do to make this printer able to print carbon fiber?
Put a hardened steel nozzle on it. That's it.
Is this a good printer for a beginner?
yes
Great review! you forgot to mention the Pro comes with a Bed handle and the regular S1 does not even though it's really minor it might be worth mentioning. I really wanna pick this model up!
Great point! Another thing I could have added, but was focused on the big main features. I appreciate the feedback and thank you for watching!
@@TheEdgeofTech You the man!
Friend,I really appreciate your work. We are looking for reviewers, would you like to review Longer's 3D printer & laser engraver?😆
you try print PLA?
Aaaaand the Ender 3 S1 Plus is coming soon.
Did you test Petg or tpu?
Not yet, but that's coming soon!
Thanks for a good video. Transition sound between videos are very disturbing. electric static sound very unpleasant😬
Thanks for watching! We fixed that in the newer videos now.
I picked up the S1 for $299($334 after tax) open box from MicroCenter. This really has everything I want, but wondering if I should return my s1 and buy this for 200 more or just buy the all metal hotend for $90.
when you say "this" did you mean the S1, or the S1 Pro? my .02... if you already have an S1, just buy the Pro extruder, keep the existing for a spare. Lights? meh, you can solve that lots of ways. Touchscreen? personally that was the least motivating of all the features, the tactileness of the dial is quite nice (I have an Ender 3). PEI bed... worthwhile definitely but you can get some real mileage out of the sheet you have, and decide later if it's starting to wear out or prints are giving you issues. $299 for an S1 is a good bargain! How is it running for you?