Thanks for taking the time to share your thoughts and posting a review. FYI pricing is the same at Newegg and most likely differed because it was 3rd party seller ( look for ship and sold by Newegg ). Best of luck with the build and thanks for being #TeamTUFgaming Overall a cool looking system with a cool RGB lighting theme.
1 AURA RGB HEADER, 3 AURA ADRESSABLE GEN 2 HEADER AND 1 RGB HEADER. I tried plugging it into one of the 3 aura adressable gen 2 headers and it didnt light up or show up in asus armoury
How is it that a screw can fall on to the floor, when you go to pick it up, it vanishes or hides from you. Or when you are looking for a Phillips head screwdriver, you find only flat heads.
Unfortunately I built my PC before I started my channel. I do have two videos of swapping parts into a PC and building my cousin's PC th-cam.com/video/5kGYr2PM3gY/w-d-xo.html
Hello bro, good video, a question, I have mine on my motherboard, how did you connect the RGB? The motherboard is not supposed to have where to connect the ARGB, or if it does and I am the wrong one, can you tell me where please? I bought this mount and would like to know how to connect it. Thank you so much
Does this works in a Phanteks case? I don't have that whole base support/PSU cage thing in the case, so the gap between the GPU and the bottom is bigger.
@@Top3Entertainment thank you, I guess I have to measure the gap, if it is at least 128mm (12,8 cm), it should be good. Otherwise, I can put it on the psu itself, but it will not be centered. Edit: I found the white PSU cover for my Phanteks case :D, I installed it and now the ROG Herculx works fine too, it sits nice on it, all fixed, GPU is well supported.
@@Top3Entertainment thanks! So I have 7 Corsair fans. 6 of them will be connected to the commander hub that the cooler came with. Where do I connect the 7th one? Directly to the mobo? Or do I need another hub? And if so where does the other hub connect to? My mobo is the ASUS ROG strix x570e. I think there’s only 2 usb connection on the motherboard
@@Top3Entertainment I think it’s 4 pin. It’s the 140 mm that has RGB, 2 cables coming out from the fan. Will serve at the exhaust from the rear. I’m not home right now so I cannot remember exactly if it’s 3 or 4 pin
@@xSagiTTariouSx one is probably 4 pin which you connect to the 4 pin header channel fan. And the other is probably a 5 volt 3pin ARGB to which you connect to the 3 pin ARGB header
OMG Thank you! 🙏 I was wondering how that level was used properly!? I spent an hour setting up and figuring this out for my gpu (ROG STRIX RTX-4060 Graphics Card).
How do you get the lights to work? Mine won't turn on! They turn on during startup and then they turn off..... I downloaded aura sync but it won't give me the option to control those rgb's.
@@Top3Entertainment yeah. I have uninstalled all the Asus lighting software numerous times and made sure everything is plugged in correctly but still nothing. My entire PC is brand new. Rather frustrating to be honest haha
I came here because I was really confused by a purchase option for the this on my rtx card. You were right on when you said that Asus has better build quality. Thanks for the video explaining this
I got mine for free from Asus by registering my ROG Strix 4090 but the gpu comes with a magnetic standoff anyway which i use to prop it up (even tho it doesn't need it)... My gpu sits too low in my case anyway for me to utilize the Herculx so it's just sitting in it's box not being used :)
poz deki zelim ti brz oporavak.vise puta si govorio da ukrajinska artiljerija je jako precizna da li je istina da ih navode sateliti ilona maska? i prica se da rusu upotrebili lasersko oruzje za te satelite da li znas o tome sta?jer je ilon mask prije nekoliko dana okrenuo se na rusku stranu.poz
I actually did need a bracket for my TUF 3080ti. Pc went into a black screen, drivers crashing. It was the last thing I checked being 10 months old. My gpu was displaying a red light I lifted the gpu and all fixed.
I just ordered mine and wow i'm planning to install it just like you, with the power cables behind the logo. My 3070Ti ROG has 3x8pin connectors and those cables in front of this looks awful. So i was thinking to put those cables behind it and didn't know if it will work. But you did it and i'm glad it works 😁
My first comment was before I watched This is kind of a must have component. Especially when you are using a riser cable to change. Its also like an easy way to add some RGB. And you are swapping out PCI cards like I have too (currently on my Video Editing workstation)
I disagree. Over time the PCIE Slot can be damaged by GPU Sag. Don't think it's impossible unless you have proven it to be impossible. Use it & be safe. there are others available like ASUS ROG Herculx Graphics Card Anti-Sag Holder Bracket (Solid Zinc Alloy Construction, Easy Toolless Installation, Included Spirit Level, Adjustable Height, Wide Compatibility, Aura Sync RGB)
I've seen a few picture of that new gpu holder and thought it looked really neat, could use some more RGB in the lower part of the case. I got it today and installed it and I must admit I'm rather disappointed. The RGB is pretty nice and bright BUT there is some kind of rainbow effect going on with the small letters which I don't like at all. It looks rather like a childs toy than anything else with that effect going on... Cameras and videos do not really pick that effect up sadly.
Warning to others. Make sure you check to make sure your MOBO has the appropriate connection. My Maximus VIII Hero does not have the 3 pin connection to hook this into. Now I'm stuck with a $50 kickstand for my GPU lol.
@@Top3Entertainment I'll probably just hang on to it until the next build and be sure to get a MOBO that can use it. Just wanted to let other people know about this so they don't make the mistake I did lol.
Yes, yes it is worth $40. When I saw this....I remortgaged my house, put the wife out to the docks and sold my 2 children to Disney. I didn't need to do that it's only 40 bucks, but, now I have peace and I'm making cash money.
@@Top3Entertainmentlol, I don’t see where it plugs in on my board so I’m starting to think it’s not compatible with my B650E-F 😢 (and your not the only video that completely skips this step).
Well it's NOT worth the money because all you really need is a post to support the unsupported end of the gpu which would cost $5-10. You're literally just paying for the branding and rgb here.
I thought it would've been like something you fix to the floor of the case that would also make it safer to transport the PC without disassembling it. My PC will never be taken with me to a LAN because I don't want to bother taking of heavy parts in case of bumps on the road. If this was sturdier and more "permanent" I'd see value in it but I mean it's got lights so $40 isn't a ripoff either, I guess
@@Top3Entertainment my pc is aircooled with a huge Noctua too, so I'd need to take that off and redo thermal paste and everything which is a bit much for like a couple hours of LAN xD
Thanks for taking the time to share your thoughts and posting a review.
FYI pricing is the same at Newegg and most likely differed because it was 3rd party seller ( look for ship and sold by Newegg ).
Best of luck with the build and thanks for being #TeamTUFgaming
Overall a cool looking system with a cool RGB lighting theme.
We talked about it and it was straight from Newegg. Hopefully the price stays as is
What do I plug that wire into. ASUS has very little info on this. I tried the addressable gen 2 headers and it does not seem to be seated.
It's the 5 v 3 pin ARGB Headed
What motherboard do you have
@@Top3Entertainment AsusZ690-p wifi
@@ArmedBatman do you see a 3pin header that has white underneath?
1 AURA RGB HEADER, 3 AURA ADRESSABLE GEN 2 HEADER AND 1 RGB HEADER. I tried plugging it into one of the 3 aura adressable gen 2 headers and it didnt light up or show up in asus armoury
How is it that a screw can fall on to the floor, when you go to pick it up, it vanishes
or hides from you. Or when you are looking for a Phillips head screwdriver, you
find only flat heads.
@@clasicdemott5986 black magic
Send a link for purchase please
Do you have a video on how you built your PC?
Unfortunately I built my PC before I started my channel. I do have two videos of swapping parts into a PC and building my cousin's PC
th-cam.com/video/5kGYr2PM3gY/w-d-xo.html
th-cam.com/video/b92OcYFYv80/w-d-xo.html
@@Top3Entertainment the case looks sick, like a red claw.
@@Mr.East_Giant the claw lol yeah it's a nice case he went all out
@@Mr.East_Giant did you have questions about building a pc?
where do i find the serial number because i can't find it on mine
It's on the back of the GPU bracket
Hello bro, good video, a question, I have mine on my motherboard, how did you connect the RGB? The motherboard is not supposed to have where to connect the ARGB, or if it does and I am the wrong one, can you tell me where please? I bought this mount and would like to know how to connect it. Thank you so much
What motherboard do you have?
@@Top3Entertainment Asus Tuf Gaming X570 Plus WiFi
@@Juanxy90 it's on the top right. Its three pin and white
Works in msi motherboards?
aura sync doesn't detect my Asus rog herculx, what can I do?
Easiest step is to Update everything through armoury crate
Hello nice video, its this compatible with msi motherboards?
@@andonigameplays9751 I don't think so
That thing looks fuggin sweet, looks like it's worth $40 to me
Hell yeah
Is there enough room to put PCI Express cards under the graphics card once you have installed this?
No
Does this works in a Phanteks case? I don't have that whole base support/PSU cage thing in the case, so the gap between the GPU and the bottom is bigger.
I would assume so but I can't confirm nor deny that
@@Top3Entertainment thank you, I guess I have to measure the gap, if it is at least 128mm (12,8 cm), it should be good. Otherwise, I can put it on the psu itself, but it will not be centered.
Edit: I found the white PSU cover for my Phanteks case :D, I installed it and now the ROG Herculx works fine too, it sits nice on it, all fixed, GPU is well supported.
@@Top3Entertainment everything is good now, found the psu cover that came with my case :).
Hell yeah
what did u plug it into
5 Volt 3 Pin ARGB Header
Does it have a clear acrylic plate you can swap out and customize like the Wingwall?
No that sounds cool
I’m building my PC tomorrow lol first one so I’m not sure how it will turn out.. are you from Texas by any chance ?
I'm not but will answer any questions you have
@@Top3Entertainment thanks! So I have 7 Corsair fans. 6 of them will be connected to the commander hub that the cooler came with. Where do I connect the 7th one? Directly to the mobo? Or do I need another hub? And if so where does the other hub connect to? My mobo is the ASUS ROG strix x570e. I think there’s only 2 usb connection on the motherboard
@@xSagiTTariouSx is it 4 or 3 pin?
@@Top3Entertainment I think it’s 4 pin. It’s the 140 mm that has RGB, 2 cables coming out from the fan. Will serve at the exhaust from the rear. I’m not home right now so I cannot remember exactly if it’s 3 or 4 pin
@@xSagiTTariouSx one is probably 4 pin which you connect to the 4 pin header channel fan. And the other is probably a 5 volt 3pin ARGB to which you connect to the 3 pin ARGB header
When you first connected it, did you have to turn the lights on in aura sync or did they automatically turn on with the pc
I can't remember but I think they were automatically on but didn't sync with the rest of RGB until I turned on aura sync
@@Top3Entertainment work with armory crate
OMG Thank you! 🙏 I was wondering how that level was used properly!? I spent an hour setting up and figuring this out for my gpu (ROG STRIX RTX-4060 Graphics Card).
Any idea if this works for a zotac 3080ti trinity?
Yes it's adjustable and the RGB is connected to the motherboard
Is this compatabile with the asus tuf x570 plus
Yes that's the motherboard I use
I plugged it into my Prime X670 P Adressable header but it did not turn on. Is this where you plugged it into? Could I have a defective unit?
That's odd
Will it work with z790 extreme in Corsair 7000x case?Thank you
it should have 5v 3 pin ARGB headers so more than likely
How do you get the lights to work? Mine won't turn on! They turn on during startup and then they turn off..... I downloaded aura sync but it won't give me the option to control those rgb's.
You plugged it into the 5 volt 3.pin header?
@@Top3Entertainment yeah. I have uninstalled all the Asus lighting software numerous times and made sure everything is plugged in correctly but still nothing. My entire PC is brand new. Rather frustrating to be honest haha
@@Tragiksouls what motherboard do you have?
@@Top3Entertainment NZXT N7 b550
@@Tragiksouls have you tried tuning it with that RGB software?
I cannot use it in Corsair 5000X case and Asus 3090ti there is not enough room under the card.
Your sayings it's to thick
Yes it is ! I get my yesterday. ROG (y)
Damn that looks sweet
I liked your video content, but please invest in a decent mic setup so we can hear you more clearly. in some spots I couldn't even hear you.
Fair enough. Appreciate the feedback
I came here because I was really confused by a purchase option for the this on my rtx card. You were right on when you said that Asus has better build quality. Thanks for the video explaining this
Sound like a positive clover too me
The username is a comment on bad luck not negative attitude hahah
I’m lost on where to plug it is it suppose to be the one that says D_Led on it?
5 volt 3 pin argb header
"It needs more RGB" let's go!
You like that
@@Top3Entertainment hell yea
Sweet looking set-up... making me cry here looking at mine lol It does look like a nice bit of kit, Lights Lights Lights.. Gamings going Disco!
The good thing is I could always change the lights to a more subtle look or even turn them off
@@Top3Entertainment Mood Lighting For sure.. I like a Deep blue.
@@TEZZMADETHIS red for angry
I got mine for free from Asus by registering my ROG Strix 4090 but the gpu comes with a magnetic standoff anyway which i use to prop it up (even tho it doesn't need it)... My gpu sits too low in my case anyway for me to utilize the Herculx so it's just sitting in it's box not being used :)
Nice. Hopefully it gets used one day
poz deki zelim ti brz oporavak.vise puta si govorio da ukrajinska artiljerija je jako precizna da li je istina da ih navode sateliti ilona maska?
i prica se da rusu upotrebili lasersko oruzje za te satelite da li znas o tome sta?jer je ilon mask prije nekoliko dana okrenuo se na rusku stranu.poz
I'll have to try and translate this and get back to you
I actually did need a bracket for my TUF 3080ti. Pc went into a black screen, drivers crashing. It was the last thing I checked being 10 months old. My gpu was displaying a red light I lifted the gpu and all fixed.
That sounds crazy
I just ordered mine and wow i'm planning to install it just like you, with the power cables behind the logo. My 3070Ti ROG has 3x8pin connectors and those cables in front of this looks awful. So i was thinking to put those cables behind it and didn't know if it will work. But you did it and i'm glad it works 😁
It definitely changes it from eyesore to eye galore lol I know it's terrible
My first comment was before I watched This is kind of a must have component. Especially when you are using a riser cable to change. Its also like an easy way to add some RGB. And you are swapping out PCI cards like I have too (currently on my Video Editing workstation)
Easy way to add RGB without looking tacky
Would anyone know if these can sync in Corsair iCue as my Asus Strix GPU and motherboard do? Easier to sync up the entire PC this way.
It should
I disagree. Over time the PCIE Slot can be damaged by GPU Sag. Don't think it's impossible unless you have proven it to be impossible. Use it & be safe. there are others available like ASUS ROG Herculx Graphics Card Anti-Sag Holder Bracket (Solid Zinc Alloy Construction, Easy Toolless Installation, Included Spirit Level, Adjustable Height, Wide Compatibility, Aura Sync RGB)
At that point you should probably already upgrade your motherboard
I've seen a few picture of that new gpu holder and thought it looked really neat, could use some more RGB in the lower part of the case.
I got it today and installed it and I must admit I'm rather disappointed. The RGB is pretty nice and bright BUT there is some kind of rainbow effect going on with the small letters which I don't like at all. It looks rather like a childs toy than anything else with that effect going on...
Cameras and videos do not really pick that effect up sadly.
Have you tried just a solid color?
Warning to others. Make sure you check to make sure your MOBO has the appropriate connection. My Maximus VIII Hero does not have the 3 pin connection to hook this into. Now I'm stuck with a $50 kickstand for my GPU lol.
Sorry to hear that. Maybe try selling it locally?
@@Top3Entertainment I'll probably just hang on to it until the next build and be sure to get a MOBO that can use it. Just wanted to let other people know about this so they don't make the mistake I did lol.
Yes, yes it is worth $40. When I saw this....I remortgaged my house, put the wife out to the docks and sold my 2 children to Disney. I didn't need to do that it's only 40 bucks, but, now I have peace and I'm making cash money.
@@deman6520 I can't believe you did that. You could have kept sold your children to a different company and probably got a better deal
i got this fan that wants to hit sata cables
I don't understand which sata cables would be close to a fan? And what it would have to do with the GPU bracket?
@@Top3Entertainment three fans on my Zotac trinity . last fan is at the end of the mother board
@@Top3Entertainment i just ordered this thing i hope it helps
i got a steal pciE but i don't think that's enough
The sata port is right under the 3rd Fan?
Literally watched to see where the cable plugs in and you skipped it…
I'm a failure 😔
@@Top3Entertainmentlol, I don’t see where it plugs in on my board so I’m starting to think it’s not compatible with my B650E-F 😢 (and your not the only video that completely skips this step).
@@StandAlone.X it should plug into you 5v 3pin Argb header. It wouldn't matter if I showed where I plug it in because we have different boards
I found it thanks for the quick responses.@@Top3Entertainment
Well it's NOT worth the money because all you really need is a post to support the unsupported end of the gpu which would cost $5-10. You're literally just paying for the branding and rgb here.
yes thats what it is
I thought it would've been like something you fix to the floor of the case that would also make it safer to transport the PC without disassembling it.
My PC will never be taken with me to a LAN because I don't want to bother taking of heavy parts in case of bumps on the road. If this was sturdier and more "permanent" I'd see value in it but I mean it's got lights so $40 isn't a ripoff either, I guess
Sucks that you would need a travel PC and your regular PC if you want to move it around so much and just swap GPUs out
@@Top3Entertainment my pc is aircooled with a huge Noctua too, so I'd need to take that off and redo thermal paste and everything which is a bit much for like a couple hours of LAN xD
nice bottle of hennessy u got there
@@Juggalotus2213 thank you
When traveling whit the computer it feel more safe i guess.. the looks is just the bonus 😎
I would still take my gpu out when traveling out of my house lol
60 euros!! 😂
That's alot