Your video saved me from going to the dealer. The front parking sensor got knocked back inside the bumper cover. I was able to reinsert it back in place. Thanks!
I had the same issue. When I removed my fascia, it popped the headlight off a peg too. I had to take the bumper off again and get the headlight reseated. Once the headlights are on properly, the fascia fits better. No more sagging under the headlight.
Perfect! Just what the doctor ordered. I've been waiting for a post like this. I want to upgrade my Halogen DRL hardware (Touring L+) to see if I can use the LED strip over the halogen hi-beams as the DRL. I'm hoping just the LED module and control module (which I have from a Limited) is all I need, we'll see. Thanks! You should post on how your replacement HID Ballast went. Thanks
Thank you so much for this video I mean I'm a body man but this was a weird side detachment for me thank you again I didn't understand about pulling the tab down that's the most important part of this video the rest is basic thanks again
Everyone do yourself a favor if you get that front bumper off do a active Grille shutter delete or pull the plastic fins out or shave them down so your radiator gets full air these shutters stay closed even on the freeway and it makes your engine run hotter
Is the headlight ballast you replaced on the bottom of the headlights? And do you happen to know if right and left have different part numbers for the ballast?
Unfortunately, I don’t know for sure, however, I believe the ballasts are identical between left and right side. Yes, the ballast is thing mounted at the bottom of the headlight. 👍🏼
Thanks for this. My washerfluid reservoir is leaking and I think this will be very helpful. Does yours have the parking assist? Looks like your bumper has the circle, so thinking yes.
Unfortunately I don’t, but the initial mistake I made was I bought the LED DRL module instead as I thought that was the ballast. Just make sure you buy the right thing. Look on eBay, the ballast is the small module with the orange rubber seal on the one side as well as a yellow lightning bolt sticker. Search “Pacifica ballast” on eBay and you’ll see them.
@@JamesAMG thanks, this is helpful. I actually have to change the DRL ballast. Did you have to take the whole headlight assembly off to change the ballast.
![[Full] 4 ต่อ 4 Celebrity EP.922 | 10 พ.ย. 67 | one31](http://i.ytimg.com/vi/zmV5HRIxIBI/mqdefault.jpg)
Thank you for posting this. I will be sharing it on my video of how to change the washer reservoir sensor.
Your video saved me from going to the dealer. The front parking sensor got knocked back inside the bumper cover. I was able to reinsert it back in place. Thanks!
Great Video! Thanks for taking the time and make a to the point video ! Liked and Subscribed!
Very well instructed. Thank you
Thank you for the video!! Having to replace the radiator in my 2018 Pacifica. This video saved me several hours.
Best Regards
Did you get that radiator replaced okay? Surprising that went out on an 18.
Mines is a 20 and needs a radiator 😢
Some of the clips are visible under the headlights, making it sag any suggestions for popping it back in
I had the same issue. When I removed my fascia, it popped the headlight off a peg too. I had to take the bumper off again and get the headlight reseated. Once the headlights are on properly, the fascia fits better. No more sagging under the headlight.
Perfect! Just what the doctor ordered. I've been waiting for a post like this. I want to upgrade my Halogen DRL hardware (Touring L+) to see if I can use the LED strip over the halogen hi-beams as the DRL. I'm hoping just the LED module and control module (which I have from a Limited) is all I need, we'll see. Thanks! You should post on how your replacement HID Ballast went. Thanks
Absolutely perfect, well done, Lad.
Thank you sir. Just the video I needed
Do you have a pn# for the ballast I need to do this on my wife’s 17’
Thank you so much for this video I mean I'm a body man but this was a weird side detachment for me thank you again I didn't understand about pulling the tab down that's the most important part of this video the rest is basic thanks again
Everyone do yourself a favor if you get that front bumper off do a active Grille shutter delete or pull the plastic fins out or shave them down so your radiator gets full air these shutters stay closed even on the freeway and it makes your engine run hotter
Is the headlight ballast you replaced on the bottom of the headlights? And do you happen to know if right and left have different part numbers for the ballast?
Unfortunately, I don’t know for sure, however, I believe the ballasts are identical between left and right side. Yes, the ballast is thing mounted at the bottom of the headlight. 👍🏼
Do you know if it’s necessary to do this to get to the transmission lines to do a flush?
Is it possible to replace fog light assembly without removing front bumper?
I’m having the hardest time removing the main connector on the driver side.. 🤦🏻♂️
Thanks for this. My washerfluid reservoir is leaking and I think this will be very helpful. Does yours have the parking assist? Looks like your bumper has the circle, so thinking yes.
Yea it’s a Limited and has all the safety tech features. All those items disconnect from just one single harness.
So helpful! Thank you!
Great video. I have to change my ballast on the same car. Do you recall the part number for the ballast? I see a few different ones online.
Unfortunately I don’t, but the initial mistake I made was I bought the LED DRL module instead as I thought that was the ballast. Just make sure you buy the right thing. Look on eBay, the ballast is the small module with the orange rubber seal on the one side as well as a yellow lightning bolt sticker. Search “Pacifica ballast” on eBay and you’ll see them.
@@JamesAMG thanks, this is helpful. I actually have to change the DRL ballast. Did you have to take the whole headlight assembly off to change the ballast.
Do you have to recalibrate the parking sensors after removing/replacing the bumper?
No you do not have to. Plug the harness back in and you’re done. 👍🏼
Great video.thanks
On a 2017 Pacifica is the horn(s) located by the front bumper?!
Yes the horn is located up front in the grill/radiator area.
Thank you very much God blessed you
Thank youu
nice video. thank you
Great video! Can you make a video how to take the hubcaps off my 1987 Ford Taurus?
🤣🤣🤣🤣