Fully 3D Printing & Building a Modern Toyota AE86 Initial D Styled model kit
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2024
- Using the HeyGears UltraCraft Reflex combo set Resin 3d printer, wash & Cure station and also their fantastic UV resins. I was able to fully print and build a Modern/Futuristic interpretation of the Toyota AE86 designed by Blackbox STL
HeyGears:
Pre-order the HeyGears UltraCraft Reflex: store.heygears.com/referral/r...
Join the HeyGears IdeaShapers community: bit.ly/41ZgYle
Ultraprint Resins:
store.heygears.com/products/u...
store.heygears.com/products/u...
store.heygears.com/products/u...
Blackbox STL:
cults3d.com/en/3d-model/vario...
Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by TH-cam Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
0:00 Printer Introduction
2:29 The Project
3:01 Printing
5:57 The Build
14:07 Finished Product - วิทยาศาสตร์และเทคโนโลยี
Man it’s insane what can be done with 3D printing nowadays! Building models as a kid and wanting to customize things just meant kit bashing or building with putty. Would have loved the the capability available now back then. Looking forward to seeing more completely 3D printed builds.
Kinda reminds me of a 300zx because of the front look
Fast and Furious Eclipse can't wait 😁
Now this looks like a homage to the legend ae86, not that Toyota branded Subaru they call gt86 😂
新しい86が、この形なら買ってた！かっこいい！
You painting is amazing and inspiring... We really need a Mini Z Tesla Roadster..!!!
Nice job my friend on making very futuristic looking 86 as takumi's great great great kids are battleing kensue's great great great kids on mt akina so thank for the video and have nice weakend bye now.
Its beautiful and the printer does a great job . That printer is very different from what i've seen .
Oh wow, now that's what the real 2023 Trueno 86 should look like! 👍
looks like a porsche 944 custom, love it!
I finally found your channel again. My power went out last week and i had to resubscribe to all my subscriptions.
Damn I'd love to see this body on a GT/GR86 Chassis!
I’ve got several things of Blackbox sitting on my desk now that I’ve been printing. Use their stuff for my slot cars.
Soooo beautiful 👍
That washing machine is pretty boss.
Super. Great job 🔥🔥🔥
I enjoyed this video very much! I'm going to look into these printers. My wife thinks it would be a good idea. Thanks for the video! 😎👍
Looks great. I actually like the simple less micro detail build.
This is super cool, really like the modern take on the AE86
Looks amazing. very much like a concept version of the Toyota AE86 . Woukd be great to see this as a production car 👍
I have SEVERAL wheels sets from Black Box STL as well as his Mustang body kit. Pretty good designs. I like this video , I love how well you build and very clean.
that 3d printer & washing machine looks awesome. The 3d model looks great but only thing missing is the cup holder & tofu 😁
That's awesome Tom! Been seeing this file on Black Box for quite some time and always wondered how it will look exactly once built.. now I know 😀 very interesting video too, was great seeing the whole process. Well done 👍🏼
Me to! Now we know🤣
That is an incredible video.👍👍
Lovely model
this is what an EV version of AE86 would look like
Che spettacolo 😍😍😍
Very nice this new vision of AE👌👌👌
For white paint, I like to go with their Dark Gray panel liner. Kit looks cool. great printer review.
Great job printed at home, modelling future 🎉
Excellent printer! The body came out VERY nice!
I do a lot of 3D printing of bodies with my own files, and I tried printing a few times at .030. The body came out great, but WOW……did a take a loooong time! 🤯
I’m happy with the .050 setting…..a wee bit more sanding, but you gotta do that anyway no matter the subject being printed.
How much time it take to print a 1:24 body at 0.30 ? 2 days ?
@@waza3350 That’s unknowable without knowing which model. Depends on the tilt angle and the amount of layers. I can bet at least 20 hours or so if it was something like a Camaro or along that line, and it was tilted at 20° on the Y axis.
Where can we find such places in India
Really cool
I wish then they modernize old cars they bring back the hard lines like what Hyundai did with the N Vision.
This looks so good. Can you do the same thing the rest of the cars in Initial D? Would love to see the rest. Awesome video
Nice job!! If you heat up the supports with a hair dryer, they come off really easy and much cleaner.
I soak mine in hot water for 10-15 minutes…….they come off pretty easily, but the body itself can be a bit soft, so you have to watch.
Maybe Gray Panel line would have worked 🤔. Anyway, it looks good. Now forward it to Toyota for a proper replacement.
This looks soooo good! Any imperfections become lost in the wonderful details
If the gr86 looked like that and had a toyota engine id be a lot more interested in them. Great video!
Such a Beautifull model, looks great this design, and the rims are perfect
yo, this is freaking cool as hell man. this is like if a delorean and a ae86 had a 3 some with a new fairlady Z and this was the result hah. cool channel mang ill be subbing to watch , i love weird shit like this
how to remove the support. try heatgun first. crispy and soft remove😊
can you please make a tutorial on how to prepare the 3d model for printing ?
There are multiple videos on my channel showing this:
3D Printing
th-cam.com/play/PLml5qXMU9oOT02oeuBh1QtMh9VJxnH7Bw.html
Question: Where does one find the mini rotary sanding disc shank seen at 4:40 (with the red electric rotary tool)? Thanks!
Aliexpress
The brand is DSPIAE
I have that file and was curious how it builds- looks great, thanks for showing us. Also would like to know what is the sanding tool used starting 4:41 ?
Dspiea rotary tool and sanding bits
That 3d printer system is pretty cool but idk if I like that it automatically dispenses the resin, that just seems like it would be one more thing needing to be cleaned after printing. Also how easy is it to get the unused resin left in the basin back into the Cartridge you loaded into the printer afterwards?
Turned out nice 👍👍
You don’t have to use it, but you can.
Same as other resins. Remove the cap, pour it back in
You can leave your resin in the tank, unless you have failure and need to filter or if you want to use another resin, you can leave it permanently in the vat
Great Job, that is a great model, would be great if it actually gets put into production as a real car, Gotta love a JDM Build.
Especially since the “86” ISNT a very good AE86 replacement as it is a Celica replacement……
Looks great. I have a question on decals if you have the time.
What is the question
Can you print costume rims
better than the gt86/brz 1st and 2nd gen for sure... Toyota should've done it like this... yrs ago I saw a concept that looked very similar to this...
wow, nice AE86 Concept Modernize. cooler than GR86.
What tool were you using at 4:40 in the video? some sort of mini rotary tool?
A mini rotory tool from DSPIAE
I called this car the the Toyota AR86 Sprinter Trueno GT-APEX, because the Trueno is back for glory, and you should ask Toyota to bring back the AE86 model
the back is very cool, but front headlights should be bigger imo. nothings wrong with big blocky headlights
I LOVE THIS BUILD!!! Will you be selling them on your site???
You can email me for a special order
Info@thescalemodelingchannel.com
😍😍😍
Wish this was a real car!
What is that rotary tool and sanding bit you are using at 4:40 ?
Dspiae rotary tool and sanding bits
s.click.aliexpress.com/e/_DEHTWR7
s.click.aliexpress.com/e/_DBO0uRx
what was the battery powered sander you used?
Dspiae
s.click.aliexpress.com/e/_DEHTWR7
s.click.aliexpress.com/e/_DBO0uRx
Any idea who designed the model?
Blackboxstl
What happened to the Fast and Furious Eclipse build? Are we getting the rest of that series? My apologies if this was mentioned before.
On pauze as i had other obligations to fulfill with sponsors and partners.
It will get finished. But some other stuff needs to get done first
@TheScalemodelingChannel ah right on. Thanks for the clarification. I am looking forward to the conclusion on that.
Tip for breaking supports. Leave your freshly printed parts in iso alcohol for a couple hours. Makes them very soft so when they break they don't damage the part.
What Toyota should've given us (The GR86 is also cool tho)
Funny. A number of days ago I was thinking why Toyota haven't come out with a new and updated version of the AE86.
what app that you use bro
For what bro
I'd buy a car like that in production version.
I'm thinking of doing these stuff myself, but I don't have the money and can only get a base model Creality Ender 3. Is it also possible for me to make amazing models like this on my own?
For these kinds of models you will need a resin printer. FDM printers simply are not able to print the parts smooth enough en with crisp details
@@TheScalemodelingChannelhmm okay then, but I don't really have a space to safely put a Resin printer. I've done research and a cheaper one is the Creality Mars 2? Is that okay enough?
I'm not looking for super high quality, it's a comprimise I'm willing to make for cheaper.
@@groundedgaming elegoo mars 2
Its a bit small. A saturn is better for printing model kits
@@TheScalemodelingChannelYea but Unfortunately, I can't afford more than $200 or I have to wait a very long time
So Mars 2 is only one in reach for me.
I don't really need the bigger models, 1:43 or even 1:32 or 1:36 is good enough for me.
Is it an acceptable printer?
@@groundedgaming yes
The gr86 should've looked like this
ハチロク?
Hachiroku
can it bake a cake?
Sure, a low heat bake cake😂 goes to about 85 degrees Celsius
@@TheScalemodelingChannel 🤣😂
looks like the new Z...
call it N.86 DoriDori - turbo, say its for transporting kimchi, and sell the product concept to Hyundai , but dont forget to send me my 33% of whatever moneis this idea generates. q=D
ok yes this is awesome but: even though it’s not like this at all, we literally already have modern 86s…
Yes true, a GT86 or GR86 or just 86, not an AE86