I have always wondered why more expensive heat sinks feel a bit different than extruded ones. Are these heat treated after skeving as well or only annealed before?
I doubt copper can be heat treated - why? because it is a single phase material - no alloying element. Copper can be work hardened, yes. I never heard of a possibility to heat treat copper.
@@lyndonthan4350 it doesn't work like with iron/steel but copper does change with heating and that has to do mostly with the rearranging of the atoms and that is why copper is so soft after it is heattreated. it get's rid of stress points and unaligned atom rows within the metal structure. and depending on how hot you make it it can also get rid of impurities that stiffen the metal
Have you tried annealing it at 350-600°C? Don't know about the time, maybe 30 minutes? Nice video! PS: sorry, I haven't watched till the end before typing this...
É isso aí pessoal, se não souber tratar o CU direito, pode ser que vc não consiga trabalhar com o CU. Piadas a parte, é interessante ver um vídeo desses.
@@skiving2020 na verdade era pra ser "vc" ao invés de "cc", eu escrevi errado, vou corrigir. "vc" é uma abreviação que usamos para a palavra "você" quando digitando informalmente. E "CU" acho que vc descobriu que é como chamamos o orifício anal.
![[Close up!!] Fin surface compression during skiving...](http://i.ytimg.com/vi/f98s-fyv4Mc/mqdefault.jpg)
I hope this becomes the hydraulic press channel but for skiving. will it skive?
Like Blendtech’s channel. Will it skive? That is the question. *cues music*
I'll try it someday. Thank you for your comment l.
I have always wondered why more expensive heat sinks feel a bit different than extruded ones. Are these heat treated after skeving as well or only annealed before?
Skiving is required after annealing. Skiving works well when the material is controlled by adjusting the annealing treatment to the hardness level.
@@skiving2020 Its neat that skiving doesn't cause work hardening, do you think it is possible to do skiving on red hot steel?
I doubt copper can be heat treated - why? because it is a single phase material - no alloying element. Copper can be work hardened, yes. I never heard of a possibility to heat treat copper.
@@lyndonthan4350 it doesn't work like with iron/steel but copper does change with heating and that has to do mostly with the rearranging of the atoms and that is why copper is so soft after it is heattreated. it get's rid of stress points and unaligned atom rows within the metal structure. and depending on how hot you make it it can also get rid of impurities that stiffen the metal
@@dovos8572 I tried machine a piece of copper one time and I failed at it.
Copper is a challenge to machine, very well done. We do the same with brass tubes and thin bars that we have to bend without break or deform 👌
Have you tried annealing it at 350-600°C? Don't know about the time, maybe 30 minutes? Nice video!
PS: sorry, I haven't watched till the end before typing this...
Thought it was chocolate! V satisfying to watch
I want to see it with a big block of chocolate
Nice bit of Skiving there chief. 👍
It should be, "Is it possible to Skive"
!!!
How much force is generated on the blade by the table actuator?
It is used at the level of 40% of the servo motor's ability.
@@skiving2020 so, what is force or power ability of servo motor on this machine?)
이렇게 만드는거엿구만......
I was looking for the name of this machine
Skiving CNC machine. Please contact us by e-mail.(ssbaik@heat-sol.com) Thank you.
É isso aí pessoal, se não souber tratar o CU direito, pode ser que vc não consiga trabalhar com o CU.
Piadas a parte, é interessante ver um vídeo desses.
Eu finalmente descobri o significado de CU e cc.
@@skiving2020 na verdade era pra ser "vc" ao invés de "cc", eu escrevi errado, vou corrigir.
"vc" é uma abreviação que usamos para a palavra "você" quando digitando informalmente.
E "CU" acho que vc descobriu que é como chamamos o orifício anal.
So that's not a chocolate?
Poggers
Is the blade bevelled
The material is tilted. The top of the blade is 35 degrees and the bottom is horizontal.
yes, all blades have a bevel.
Sooo, why are you "skiving"?
Как заточить этот нож?
Отшлифовать абразивным камнем.
Лезвие, слишком острое после абразивного камня, погнет штифт.
Diablo 3 legendary drop sound?
Some people have been talking about it.:)))
@@skiving2020 I have logged too many hours into that game. :)
Чё это за хрень? Зачем она нужна?)
Heatsinks? Check in your computer. You will see a few.
Heatsink made like this is quite popular in industrial applications.
Одна из стадий производства радиаторов охлаждения для компьютерной техники.