I came across this video because I had to replace mine in a 2016 F150 XLT. The buttons on the steering wheel were out *and* the turn signal controls were out too (wipers, windshield spray, brights, left/right turn). The only thing that worked on the switch was the high speed wiper. The column housing replacement went fine and restored most functions, except for the lower steering wheel functions. It was easy, this video did help a lot. I needed a long 3mm hex tool (allen wrench) for the airbag removal, 7/32" for the screws and 15/16" for the steering wheel bolt torqued to 41 ft/lbs for mine. I used a rope around my leg and through the steering wheel to keep the steering wheel from turning while getting the steering wheel bolt on/off. I suspect the SCCM module needs reprogramming. I've ordered an OBD reader for Forscan and will attempt to reload the 'As Built' SCCM settings. You can get those values from Ford (motorcraft) online based on your VIN. I'll try and circle back to update with the results. It's good to have the wipers and blinkers back. UPDATE: Forscan did it. I had to reconfigure the first four bytes of location 724-03-01. These are the 'steering wheel switch left hand cfg' and 'steering wheel right hand cfg'. I set them to match the 'as built' values for my VIN and the buttons started working correctly again. I spent a day watching videos, downloading parameters for reference and setting up an old surface pro with the Forscan software and data so I could use it in my truck. Followed all appropriate precautions and it worked like a charm. Best wishes and good luck!
I have a 2016 f150 xlt. I ordered my replacement on getoem.com and entered my vin to confirm fit It was plug and play, no need to even use forscan or the cable I bought for it.
@@hall87668 yep, that’s the p/n 👍🏻. Glad yours worked outta the box? I had backburnered a cross country road trip and got the programming to make sure. With my luck, it wouldn’t have worked plug n play so…yeah.
Great help! I was able to get this done in 15 and this was the only video I could find the cover the steering control module instead of the clock spring which I had already tried to fix, and it did not resolve the issue
I came across this video because I had to replace mine in a 2016 F150 XLT. The buttons on the steering wheel were out *and* the turn signal controls were out too (wipers, windshield spray, brights, left/right turn). The only thing that worked on the switch was the high speed wiper. The column housing replacement went fine and restored most functions, except for the lower steering wheel functions. It was easy, this video did help a lot. I needed a long 3mm hex tool (allen wrench) for the airbag removal, 7/32" for the screws and 15/16" for the steering wheel bolt torqued to 41 ft/lbs for mine. I used a rope around my leg and through the steering wheel to keep the steering wheel from turning while getting the steering wheel bolt on/off. I suspect the SCCM module needs reprogramming. I've ordered an OBD reader for Forscan and will attempt to reload the 'As Built' SCCM settings. You can get those values from Ford (motorcraft) online based on your VIN. I'll try and circle back to update with the results. It's good to have the wipers and blinkers back.
UPDATE: Forscan did it. I had to reconfigure the first four bytes of location 724-03-01. These are the 'steering wheel switch left hand cfg' and 'steering wheel right hand cfg'. I set them to match the 'as built' values for my VIN and the buttons started working correctly again. I spent a day watching videos, downloading parameters for reference and setting up an old surface pro with the Forscan software and data so I could use it in my truck. Followed all appropriate precautions and it worked like a charm. Best wishes and good luck!
Oh man i really wish you could make a video about how you did this im having the same problems.
My 2016 F-150 XLT same deal. What ForScan programmer did you use?
I have a 2016 f150 xlt. I ordered my replacement on getoem.com and entered my vin to confirm fit
It was plug and play, no need to even use forscan or the cable I bought for it.
Part number: HL3Z-3F791-AB
@@hall87668 yep, that’s the p/n 👍🏻. Glad yours worked outta the box? I had backburnered a cross country road trip and got the programming to make sure. With my luck, it wouldn’t have worked plug n play so…yeah.
Great help! I was able to get this done in 15 and this was the only video I could find the cover the steering control module instead of the clock spring which I had already tried to fix, and it did not resolve the issue
When replacing a SCCM how do you program it? Do you get it from the factory as built data on line?
also wondering this. Would you be able to use Forscan to backup the old one and reprogram the new one?
Hey buddy, doing one in a 22 f250, did you have to reprogram that module?
Yes…look up Bearded Ford Tech here on YT. He shows the programming on a F250.
If the buttons are t working then all you have to replace is the clockspring