2002 - 2009 Chevy Trailblazer / Envoy Backup Camera Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ม.ค. 2025
  • Parts linked in the description below!
    Watch a full tutorial as a 2008 Chevy Trailblazer / GMC Envoy will have a brand new backup camera installed. We will be adding this camera to an existing aftermarket touchscreen radio installed previously.
    This video applies to Chevrolet (Chevy) Trailblazer, GMC Envoy, Buick Rainer, Isuzu Ascender, Oldsmobile Bravada, Saab 9-7X, and some Chevy Colorado (2004 - 2012) models for years 2002, 2003, 2004, 2005, 2006, 2007, 2008, and 2009. This video also includes dash trim and stereo removal, wiring, camera installation, and testing.
    Click here for the radio install video:
    • 2002 - 2009 Chevy Trai...
    Click here to see the radio unboxing we used in this video:
    • EVEN BETTER? Budget-Fr...
    If you have any questions, leave a comment below! Be sure to like and subscribe!
    Recommended backup cameras (Amazon Associate Paid Links):
    *Natika Backup Camera Kit: amzn.to/3csfJn3
    Radio Install Parts Used (Amazon Associate Paid Links):
    *JoyBring Apple Carplay / Android Auto Radio: amzn.to/3KnOOcn
    *Metra Axxess LC-GMRC-01 (for non-Bose, no steering wheel volume controls, no OnStar vehicles): amzn.to/3Iyu0hr
    -OR use the Crux SWRGM-48 (for Bose or Non-Bose, Steering wheel volume control retention, OnStar vehicles): amzn.to/3wXv4V5
    *Metra 95-2001 Dash Kit: amzn.to/3vZpp0H
    *Metra 40-GM10 Antenna Adapter: amzn.to/3vZwXjQ
    *Optional USB 3.0 & Aux Adapter (if your USB / AUX ports are on the rear of the radio): amzn.to/2SYXEGS
    Disclosure: As an Amazon Associate I earn from qualifying purchases

ความคิดเห็น • 46

  • @ProvoBeastAudio
    @ProvoBeastAudio  2 ปีที่แล้ว +3

    Parts used linked in the description of the video!

  • @louietrabal2550
    @louietrabal2550 ปีที่แล้ว +2

    This video was spot on. The most invaluable tip for me was to use soap when running wire through grommet. That alone saved me tons of aggravation. Thanks again for this wonderful video. Keep up the good work.

  • @haidershahid5040
    @haidershahid5040 หลายเดือนก่อน

    Thats one clean looking trailblazer

  • @timothyboyer5391
    @timothyboyer5391 ปีที่แล้ว

    Cool video very excited to install

  • @TylerYaweh
    @TylerYaweh 5 หลายเดือนก่อน

    I used a piece of 12awg romex to fish thru the rubber tube at the top of trunk, took about 20 seconds no issues

  • @RayeTheQuirkyHSP
    @RayeTheQuirkyHSP 3 วันที่ผ่านมา

    🙋🏾‍♀️ smart harness did you use? I just bought a 2002 envoy and I have an Amazon radio touchscreen, dash cam and backup camera. I need the radio harness but not sure which will fit mine. I am getting the adapters and trim kit and want to make sure I have everything before I start. Your videos have been y helpful thus far!👍🏾👊🏾

  • @rlvtrader
    @rlvtrader 2 ปีที่แล้ว +3

    Damn that rubber grommet to HELL!!! I just took a break from finally pulling the cable through that thing. My hand is totally cramped up. The issue is the bottom part of the grommet, which has barely any give to let the RCA jack through. In hindsight, I should have just cut off the RCA jack and re-attached it after fishing the wire through.

  • @dwightdodd3734
    @dwightdodd3734 ปีที่แล้ว +2

    excellent video !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @nancylewis7142
    @nancylewis7142 2 ปีที่แล้ว +1

    perfect info, good video.

  • @kamanoBFST
    @kamanoBFST ปีที่แล้ว +1

    Hi, I installed the same model on my 2008 trailblazer and the backup camera as well. Everything was working great until suddenly the screen went fully black. Can you assist on this ? Thanks

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว +1

      The cameras included with the no-name brand Radios are garbage. You may have a failed. camera I recommend checking connections

  • @greenganjablue8457
    @greenganjablue8457 2 ปีที่แล้ว

    The video is good as far as showing the wires getting ran. But I need to know how the power wire is connected to the back of the radio.

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      Power wire isn't connected behind the radio, it is connected to the power and ground of the reverse light. All that connects to the radio is the RCA video cable to the radio's video input, and the red wire lead for the trigger wire to the radio's reverse trigger wire.

  • @timburns9747
    @timburns9747 2 ปีที่แล้ว +1

    Great content!

    • @timburns9747
      @timburns9747 2 ปีที่แล้ว

      I just did this exact install. Everything seems to working great EXCEPT when I open my driver door the radio turns off even with the engine running. Any advice?

  • @gerardorenteria6640
    @gerardorenteria6640 2 ปีที่แล้ว

    I wish I would seen this sooner

  • @ImYourHitBox
    @ImYourHitBox ปีที่แล้ว +1

    Ok I have the same car and did what u did and no power when in reverse

  • @マストリョーダ
    @マストリョーダ 2 ปีที่แล้ว

    Thanks for information

  • @SparksandBubbles
    @SparksandBubbles 6 หลายเดือนก่อน +1

    What's the link for the coupler ?

  • @lasonblackmon375
    @lasonblackmon375 ปีที่แล้ว +1

    I used 20awg instead of 22 could that cause it not to work?

  • @aaronechols9941
    @aaronechols9941 ปีที่แล้ว

    After it's hooked up do you need to change the fuse #39 interior fuse box to a different fuse?

  • @ganeshnarayan5505
    @ganeshnarayan5505 2 ปีที่แล้ว

    Hey Chris love your content keep it up Brother.

  • @moveit05
    @moveit05 8 หลายเดือนก่อน

    I order the crux harness for my trailblazer connecged all wires color coded and works great when i turn the key to acc on position but when i start the car there is sound any idea why?

  • @bryanwoods5494
    @bryanwoods5494 2 ปีที่แล้ว +2

    Unfortunately even though it lists my model year in the description my model year 2002 the reverse light is not in the tail light assembly so it is not so easy. I have watched a lot of these videos and all are the same, they pick a year that is easy to do and then leave out the details for the actual model you are looking for. I think 2004 and up the reverse light is in the tail light assembly, but in 2002 for sure the reverse light is separate and is in the bumper so you need to trace the wiring from the light and find where the heck it comes into the cab, if it ever does at the back in order to splice in. I have wasted upwards of 30 hrs trying to find this information online, where it would have taken me at most 3 hrs and a car hoist to find where it is on my 2002. frustrating to no end

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว +3

      We don't purposely choose the easiest of the model years, it's the luck of the draw what rolls up into the shop. I'm sorry you are having a hard time, we wish we could produce content for each and every year or every model as detailed as we can, but that's not how the cards are dealt. If this is more than you can handle, we suggest taking your vehicle to an audio shop for assistance.

    • @randallrigdon9379
      @randallrigdon9379 2 ปีที่แล้ว

      I have a 2003 and my wiring harness went bad for the abs. So I went to junk yard and got another wiring harness. It did fix the problem. When I changed the wiring harness the reverse lights split off from main wiring harness. Pretty sure it runs into abs/fuel pump wiring harness. Very hard to get to it. Lower spare tire.

    • @shawnyoung5960
      @shawnyoung5960 ปีที่แล้ว +3

      ??? That's weird, I have a 2002 TBLT and my reverse lights are in the rear light assembly in the same spot and connected the same as this vehicle.

    • @lonnyross8872
      @lonnyross8872 ปีที่แล้ว +2

      @@shawnyoung5960 I think the guy above has an envoy...

    • @shawnyoung5960
      @shawnyoung5960 ปีที่แล้ว +1

      @@lonnyross8872 That makes sense now, Ty. I was thinking it was a TB he was talking about.

  • @JustinLynch80
    @JustinLynch80 2 ปีที่แล้ว +1

    What did you use to seal the external hole for the camera wire?

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว +1

      Little bit of silicon does the job!

  • @ZareefHuq
    @ZareefHuq 2 ปีที่แล้ว

    How much slack did you have left on that RCA extension that you used? I have an Envoy XL that is 16 inches longer so I'm wondering if I should get a longer extension.

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      We linked a camera in the description that will reach just fine.

  • @jam5685
    @jam5685 4 หลายเดือนก่อน

    Súper late comment but does this have apple car play?

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 หลายเดือนก่อน

      It does, but this unit is garbage. Go with a brand name unit.

    • @jam5685
      @jam5685 4 หลายเดือนก่อน

      @@ProvoBeastAudio thank you just saw the video install and radio looked clean but thanks for the advice I’ll look into something else

  • @Olexandr_Hit
    @Olexandr_Hit ปีที่แล้ว

    Where are you bought it?

  • @SchanaqueJohnson
    @SchanaqueJohnson 7 หลายเดือนก่อน +4

    Can i just send my car to you

  • @greenganjablue8457
    @greenganjablue8457 2 ปีที่แล้ว +1

    I tried this and ripped all my wires to hell trying to pull the wires through that tiny rubber boot. This is nowhere as easy as it seems on your video.

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว +1

      We are sorry to hear about that, we suggest using something to fish the wires through, and to heavily coat it with soap and water to help slide it through the rubber boot. There is no easy way around it, and if it seems too much, we suggest visiting your local audio shop.

    • @drdghattierdc
      @drdghattierdc 2 ปีที่แล้ว +3

      You must not have taken your time. I have done longer boot assemblies with out soap and water. Just be gentle. The soap is a great idea though. About to do a 2005 envoy. Great video.

  • @JCT442
    @JCT442 หลายเดือนก่อน

    It's not a "2008 Trailblazer."

  • @ThatGuyThatCommentedOn_A_Video
    @ThatGuyThatCommentedOn_A_Video 26 วันที่ผ่านมา

    You say “at this point in time” too much