Nice, my mom always bought the top Kenmore elite canister ones in the 1970s. They were made by Whirlpool in USA, 1957 to about 89 or 90 when Panasonic took over Kenmore. Lots of metal, and a nice AMETEK USA made motor. Hose ends were chromed steel. CLEVA is doing a good job now, they use Panasonic motors. My Panasonic lasted decades, then gave it away to a friend. Type U bags.
We'll have to see about Cleva because the future of Kenmore right now is uncertain due to Sears going out of business. Cause without Kenmore, Cleva could be on the decline.
I have always loved this vacuum. My local Triple A had one of these that they bought at our sears hometown appliance store. Growing up my parents hated kenmore and sears. But little did they know...
I've used them before, it was a long time ago but I thought they were awesome vacuums. From what I remember, the suction and airflow were fantastic, they definetly were really quiet, and I thought the filtration system looked excellent. I actually have a little Henry Desktop vacuum in my collection as well.
@@panasonicvac4036 I'm in Canada and I've had mine for 5 years. Henry and my karcher CV30/1 are the 2 best vacuums I've ever owned. Although I kinda want to replace the karcher with a sebo because the karcher is kinda held together with hopes and dreams rn and the cord has at least 10 tape spots on it.
My Kenmore Progressive upright blows away large particles when I vacuum. I installed a new bag and it still does this, any suggestions what I do to fix this?
So you say you replaced the sticker, And I need some help Panasonic. I have a Kenmore Progressive Intelliclean Direct-Drive with a torn sticker on the off button. I've tried to figure out anywhere I can get my hands on a new sticker to either print, Photoshop and print, Or use to fix the sticker on mine. If you have suggestions for where I could get a sticker, Let me know. Thank you!
@@panasonicvac4036 No, I haven't. I've been trying to just print it out since I feel as if it would be more simple to just print a new one. Are you implying that I can buy a whole handle, Or just get the sticker/part?
@@panasonicvac4036 Just checked, It's not available let alone I couldn't even find a model similar enough to mine. It showed the bagless intelliclean, But I have the blue bagged one. They're the same sticker I assume, But it was not available.
Question, what tools did yesterday I use to clean dis? Cuz I'm cleaning my Kenmore progressive all floor custom and it isn't really well... Clean. Any suggestions on what to use to really deep clean it + the motor?
Unfortunately I don't have an answer to that question because I don't watch videos as much as I used to nowadays so I don't know what condition your Kenmore is in. But vacuum repair videos is where I would go to for suggestions like "Performance Reviews" for example or you could go to your local authorized dealers and they would either give you tips or show you how to fully service your Kenmore.
Not true, loud doesn't mean more power. There are machines that are super quiet like Miele for example that are one of the most powerful machines on the market. That's what I'd rather have instead.
Honestly, prob at some thrift store but sadly Sears and the Kenmore brand stopped making these. I recommend looking on offer up or eBay to find this. Got mine at good will for 13 bucks. Maybe try goodwill :D 😁
Nice, my mom always bought the top Kenmore elite canister ones in the 1970s. They were made by Whirlpool in USA, 1957 to about 89 or 90 when Panasonic took over Kenmore. Lots of metal, and a nice AMETEK USA made motor. Hose ends were chromed steel.
CLEVA is doing a good job now, they use Panasonic motors. My Panasonic lasted decades, then gave it away to a friend. Type U bags.
We'll have to see about Cleva because the future of Kenmore right now is uncertain due to Sears going out of business. Cause without Kenmore, Cleva could be on the decline.
I have always loved this vacuum. My local Triple A had one of these that they bought at our sears hometown appliance store. Growing up my parents hated kenmore and sears. But little did they know...
Yeah that's what most people have experienced with Sears. To me I've always had great experience from them, even some of my relatives had too.
Panasonic Vac this is a little off topic, but do you have much experience or opinion on Henry numatic vacuums?
I've used them before, it was a long time ago but I thought they were awesome vacuums. From what I remember, the suction and airflow were fantastic, they definetly were really quiet, and I thought the filtration system looked excellent. I actually have a little Henry Desktop vacuum in my collection as well.
Panasonic Vac cool because I ordered one lol. I haven’t found much on here except for the UK and the videos just don’t give me any info. Thank you!
@@panasonicvac4036 I'm in Canada and I've had mine for 5 years. Henry and my karcher CV30/1 are the 2 best vacuums I've ever owned. Although I kinda want to replace the karcher with a sebo because the karcher is kinda held together with hopes and dreams rn and the cord has at least 10 tape spots on it.
You have quite long fingers, it's amazing 😀
Can you post a how-to video on correctly replacing the belt?
My Kenmore Progressive upright blows away large particles when I vacuum. I installed a new bag and it still does this, any suggestions what I do to fix this?
When was the last time you replaced the filters or had your vacuum tuned up?
Mine constantly clogs. A real pain! Maybe that is it. Blowing out hose only works temporarily.
Sounds like either you keep vacumming up stuff you're not supposed to or you have a really dirty place and you're not vacuuming real slowly.
So you say you replaced the sticker, And I need some help Panasonic. I have a Kenmore Progressive Intelliclean Direct-Drive with a torn sticker on the off button. I've tried to figure out anywhere I can get my hands on a new sticker to either print, Photoshop and print, Or use to fix the sticker on mine. If you have suggestions for where I could get a sticker, Let me know. Thank you!
Did you try Sears Parts? That's where I got mine from.
@@panasonicvac4036 No, I haven't. I've been trying to just print it out since I feel as if it would be more simple to just print a new one. Are you implying that I can buy a whole handle, Or just get the sticker/part?
You can buy just the sticker.
@@panasonicvac4036 Just checked, It's not available let alone I couldn't even find a model similar enough to mine. It showed the bagless intelliclean, But I have the blue bagged one. They're the same sticker I assume, But it was not available.
See if you can try other websites like partswarehouse.com since luckily anybody can now stock up parts for Kenmore as Sears just went out of business.
His come this motor sounds way different than the blue kenmore unit that look similar to this one?
Different motors
What type of motor does this one have. And what motor does the other one have?
They're both Panasonic. This one is designed to use rubber belts and the other one is designed for the brushroll motor.
I like the sound of it
Question, what tools did yesterday I use to clean dis? Cuz I'm cleaning my Kenmore progressive all floor custom and it isn't really well... Clean. Any suggestions on what to use to really deep clean it + the motor?
Unfortunately I don't have an answer to that question because I don't watch videos as much as I used to nowadays so I don't know what condition your Kenmore is in. But vacuum repair videos is where I would go to for suggestions like "Performance Reviews" for example or you could go to your local authorized dealers and they would either give you tips or show you how to fully service your Kenmore.
Leaf blower or a air compressor then take it to a vacuum store, here they charge half price on a full service if you blow all the nasty out first.
Is it loud
No but it isn't quiet either.
Ok
Loud is what I want, means power.
Not true, loud doesn't mean more power. There are machines that are super quiet like Miele for example that are one of the most powerful machines on the market. That's what I'd rather have instead.
When you turned the vacuum on, it sounded like a Sebo Windup
Only my Essential G1 does the soft start up. My X1, X4, and X5 doesn't.
W O W .
Where can I get one, m8?
Honestly, prob at some thrift store but sadly Sears and the Kenmore brand stopped making these. I recommend looking on offer up or eBay to find this. Got mine at good will for 13 bucks. Maybe try goodwill :D 😁
That vacuum sounds very creaky when you spun it around
That's what you would usually find on some plastic vacuums.
I have a Inuition that dose that it's normal for these models
@@panasonicvac4036 do they not make these with the fingertip controls and intli clean anymore?
Nope.
It sounds like the older version of the bissell pet hair eraser
Hi Nice Video And Nice Socks And Pants
It sounds like a erueka air spedd vaccum