Te recomiendo colocar tu logotipo con tu nombre con marca de agua en tus videos. Así también ya sabremos que aquellos que difudan en otros canales o plataformas sean tuyos.
You're an absolute design and fabrication genius! So precise! Absolutely brilliant. Love the silent format and the showing of the tool use before the video. So glad I found your channel. Hope to achieve some of your precision! It is inspiring!
Excellent work my friend, very calm very positive, you are the first youtuber that I have seen that knows how to operate an electric screwdriver, no revving up two or three times, just calmly screwing the screw down, both you and the person who taught you deserve everything which will come your way as you travel through this life, thank you for the upload. Bob
No he visto a nadie haciendo este trabajo más relajado y proliciozamente perfecto parece que estuvieras angelicalmente en un quirófano operando un paciente terminal admiro tú relajo felicitaciones
Looked at several of these, and think this is the best. The type with rods and linear bearings are industrial grade, but far more expensive and harder to build. I used 3/4 "L" extrusions 1/8" thick, and mine is super accurate. Be sure to use the HDPE tape or your aluminum will gall and seize up.
Nice! I patterned mine after a $700 Festool table that lets you hinge a panel from a panel saw up, and slide the work under it for a zero clearance cut. I built mine as a quick attach to a table saw to take advantage of the weight and flat surface. Biggest thing is devising a mount for the panel that's quick to mount and release, and accurate as 90 degrees... You lost a little cut with the stopper, as a longer piece would let the blade come close to the back support. I really did like how you made the crossbars adjustable!
Siempre que lo veo, me parece que tiene manos de coufier y no puedo evitar pensar que cuando hace los trabajos, sus manos parecen estar desarmando una bomba atómica...!!! Mucha paciencia y precisión oriental !!! Whenever I see him, I think he has coufier hands and I can not help but think that when he does the work, his hands seem to be disarming an atomic bomb ... !!! A lot of patience and oriental precision !!
I am really happy that at least I got an useful video on how to use my circular saw (like that of yours purchased long back) in the video and was looking for a video to make a jig for it. Now your video has given me the hope of using it usefully. If you can share the wood pieces that are used to make it I will try to do it. Hope my request will receive your kind attention.
Mind-blowing, you're a legend! The only thing I don't get is how this video has any dislikes, I suppose you made some people are little bit envious with your ideas :)
Great! Excellent work and impeccable execution, friend! I'd be really interested in locating a link to what you call "Inexpensive aluminum frame for clamping".
Hello there! I would rather use the end raiser as a perpendicular fence for the cross cuts. Because aligning each piece to the laser guide every time you will make a cut can be very tedious. I call "end raiser" to the support where the saw ends its travel. Use it to make the cross cuts. It will be faster that way. Just make sure it's perpendicular to the blade. Very nice jig though. I like the gauge for cutting any angles!
Grwat jig and outstanding craftmanship. FYI I think if you had a link in the discription where to buy plans kit on all your inventions it would do very well
EXCELENTE DEMOSTRACION !!!! Se ve directamente la Tecnica del uso de las herramientas, tranquilo y seguro de la demostracion Very Very Very Nice and Congratulation.
Автор очень большой молодец! Респект! Но, есть очень много существенных ньюансов которые никак не озвучены. Самое главное - это сама пила, точнее её подошва, высота бортов 10мм где-то, без таких бортов точного реза в вертикальной плоскости достичь будет очень сложно. Найти в продаже такую пилу мне не удалось и врятли получиться за вменяемые деньги (цена скорее всего будет сравнима уже с нормальной торцовкой), повторить проект не представляется возможным. Так что красивое видео это одно, а реализация на практике совсем другое, увы(
This is a Ryobi W-663EDM, it has an engine speed of 4000 per minute, which is probably why it works quietly. But, apparently, due to the specific voltage of 100 volts, it is sold (or was sold) only in Japan.
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Te recomiendo colocar tu logotipo con tu nombre con marca de agua en tus videos. Así también ya sabremos que aquellos que difudan en otros canales o plataformas sean tuyos.
PÑ
es 3b,
You're an absolute design and fabrication genius! So precise! Absolutely brilliant. Love the silent format and the showing of the tool use before the video. So glad I found your channel. Hope to achieve some of your precision! It is inspiring!
Excellent work my friend, very calm very positive, you are the first youtuber that I have seen that knows how to operate an electric screwdriver, no revving up two or three times, just calmly screwing the screw down, both you and the person who taught you deserve everything which will come your way as you travel through this life, thank you for the upload. Bob
Cortador.de.fierro.i ndicar.su.fa ricacion
Man, you are like a surgeon with DIY projects.
Great video as always mate. Love the demonstration before the tutorial and once again, no irritating music! Love your work.
Awesome job. I appreciate that you show us its multiple uses first before the construction.
I Love the sound of the operating tools. Mustang 🐎 feeling
Thanks for sharing. Your videos are very calming to watch. You can feel your tools are made with much pride and perfection.
Руки откуда надо растут!!!👍👍
congratulations! excellent working technique and impeccable execution.
You should show links where to get all the parts and possibly offer to email instructions on how to build it, very nice set up you have.
Amazing, very nice and clean
Thanks
Огромный лайк - этот человек МОЛЧИТ!!!!
Судя по рукам, аккуратности и розовому респиратору этот человек - девушка
@@МегаВольт-е2щ Да нет же, парень он.
좋은 영상 잘 보았습니다
감사합니다
No he visto a nadie haciendo este trabajo más relajado y proliciozamente perfecto parece que estuvieras angelicalmente en un quirófano operando un paciente terminal admiro tú relajo felicitaciones
Looked at several of these, and think this is the best. The type with rods and linear bearings are industrial grade, but far more expensive and harder to build. I used 3/4 "L" extrusions 1/8" thick, and mine is super accurate. Be sure to use the HDPE tape or your aluminum will gall and seize up.
Interested in your drill guide - look very nice and so much better than what you normally see!
Dios le da a cada uno la forma de sobresalir. éste mudito tiene mucho ingenio, felicitaciones Dios lo siga bendiciendo.
Outstanding construction! That was the clearest video without words that I have ever seen.
Nice! I patterned mine after a $700 Festool table that lets you hinge a panel from a panel saw up, and slide the work under it for a zero clearance cut. I built mine as a quick attach to a table saw to take advantage of the weight and flat surface. Biggest thing is devising a mount for the panel that's quick to mount and release, and accurate as 90 degrees...
You lost a little cut with the stopper, as a longer piece would let the blade come close to the back support.
I really did like how you made the crossbars adjustable!
Siempre que lo veo, me parece que tiene manos de coufier y no puedo evitar pensar que cuando hace los trabajos, sus manos parecen estar desarmando una bomba atómica...!!! Mucha paciencia y precisión oriental !!!
Whenever I see him, I think he has coufier hands and I can not help but think that when he does the work, his hands seem to be disarming an atomic bomb ... !!! A lot of patience and oriental precision !!
I am really happy that at least I got an useful video on how to use my circular saw (like that of yours purchased long back) in the video and was looking for a video to make a jig for it. Now your video has given me the hope of using it usefully.
If you can share the wood pieces that are used to make it I will try to do it. Hope my request will receive your kind attention.
Very good working!
ti seguo da poco ..devo dire che sei veramente bravo ...complimenti !
丸のこを買ったが小さい木材の切り方がわからず困っていましたがこれを見て救われました
I saw a lot of your Videos, your Work is ausome.
Все очень аккуратно и красиво 👍
Espetacular! Projeto prático e inteligente. Parabéns!
Mind-blowing, you're a legend!
The only thing I don't get is how this video has any dislikes, I suppose you made some people are little bit envious with your ideas :)
Excellent work and presentation of work and creation tool
Супер - Гипер!!!))
Отличная работа!
Mistrz. Proste i piękne.
Dziękuję.
Brilliant design. Thanks for sharing. Looking forward for your next video.
Amazing dude
You are a genius! Greetings from Argentina
Класс. С удовольствием купил бы.
very well made jig and video. thank you for sharing your work.
Great job!
Great! Excellent work and impeccable execution, friend!
I'd be really interested in locating a link to what you call "Inexpensive aluminum frame for clamping".
These videos are good. A pdf with measurements will be good as well.
You should make a video on your portable drill press. I like the look and function of it. Thank you for video. Great work.
Hello there!
I would rather use the end raiser as a perpendicular fence for the cross cuts. Because aligning each piece to the laser guide every time you will make a cut can be very tedious.
I call "end raiser" to the support where the saw ends its travel. Use it to make the cross cuts. It will be faster that way. Just make sure it's perpendicular to the blade.
Very nice jig though. I like the gauge for cutting any angles!
Excellent job it’s very simple and awesome one!
This is the best cross cut jig i have seen on here. well built and thought through. you could actually sell this jig.
Grwat jig and outstanding craftmanship. FYI I think if you had a link in the discription where to buy plans kit on all your inventions it would do very well
Excelentes videos gracias
COOL! надо себе сделать такую направляющую.
great job done, informative and well self explanatory
Simply perfect
EXCELENTE DEMOSTRACION !!!! Se ve directamente la Tecnica del uso de las herramientas, tranquilo y seguro de la demostracion Very Very Very Nice and Congratulation.
ありがとうJSK-koubou! 非常に良いと明確な教訓！
Good job! Looking forward to your next video .... regards from Holland!
excelente o seu trabalho, abraços do Brazil
Maestro un saludo desde Ecuador mis sinceras felicitaciones x exelente trabajo ,le pediria de favor medidas y traducirlo en español gracias.
Good idea
This thing is just awesome! Well built man! Thumbs up!
Very Good
You are the winner out of all the others !. Can you make me one, I will buy it of you ?
Awesome skills !!
Без слов всё понятно. Спасибо за видео.
Super Craftsmanship!!
Мужик ты крут
Great video👍 Clear and clean job..
Thank you!
Such precision! Nice jig. : )
japanese one
Wonderfull that's good job
Gongratulation. Exelent work and perfect video. I learned a lot.
Precise and useful. Thanks for sharing your idea!
Excellent, thanks for sharing.
رائع بكل ما تعنيه الكلمة
شكرا جزيلا
Thank you, very precise video. Real nice work.
innovative ...... i like the video. I hope the tutorial can be given with the material size ..
Great jig! Congratulations.
slowly but precise
thank you for sharing your work
У нас говорят - золотые руки
The best I have seen
Great job.
Wow! Bravo!
Автор очень большой молодец! Респект! Но, есть очень много существенных ньюансов которые никак не озвучены. Самое главное - это сама пила, точнее её подошва, высота бортов 10мм где-то, без таких бортов точного реза в вертикальной плоскости достичь будет очень сложно. Найти в продаже такую пилу мне не удалось и врятли получиться за вменяемые деньги (цена скорее всего будет сравнима уже с нормальной торцовкой), повторить проект не представляется возможным. Так что красивое видео это одно, а реализация на практике совсем другое, увы(
Правильно - нюанс. Вряд ли. Получится.
impresionante amigo me encanta tu trabajo.
Oh yes! I NEED this in my life! 😃
love this video thankyou greatstuff
Excelent job.
I'm struggling to find the extrusion used for the saw runners in the UK, anyone any ideas? Cheers!
Love this man's work!!!
Thank you for the idea
Thanks for sharing. Good Job. :)
#1 design and nice presentation as well 👍 : -)
This Ryobi saw runs so smooth....
This is a Ryobi W-663EDM, it has an engine speed of 4000 per minute, which is probably why it works quietly. But, apparently, due to the specific voltage of 100 volts, it is sold (or was sold) only in Japan.
実表の大きさは？どうもありがとうございます！ 素晴らしいビデオだと私はそれを作ります！
Impressive, most impressive
見返してみると、これはこれで良いですが、長期間精度を保つとなると素材の限界とか出るかもですね！
MDF板ってクリープ（負荷を連続的にかけ続けると曲がる）現象がおきるんです。
この不具合は一年くらい前から分かっていたので精度が要求される部分はアルミフレームなどを多用するようになりました。
JSK-koubou 様 そうなんですね、ありがとうございます♪
Perfeito ,inteligente muito abilidoso encantada apaixonei...
Excellent.
great video, amazing jig!!
Realy great !!!
I'm probably gonna do something like this for myself. Thanks!
somos todos Brasil Estamos no caminho certo força presidente bolsonaro
Great video, thanks! But I really wonder. What about the dust?
★函状の物は直角、角度切を調整する為の物なのでしょうか？・仰々しい作りで意味が良く分かりません？★底板にアルミ材で凹レール2本が埋め込みされておりますが何の為の物にのでしょうか？？・切断する材料を押さえる金具の位置移動レールでしょうか？お教え頂ければ幸いです。