Making a 9 Color Sign | ToolsToday
ฝัง
- เผยแพร่เมื่อ 29 ต.ค. 2020
- Watch the short version here: • Making a 9 Color Sign ...
Making a 9 color sign for my daughter's room using Amana Tool® CNC Router Bits and STEPCRAFT M.700 CNC machine available on our website. www.toolstoday.com
Matt from ToolsToday used the 90° V-Groove insert carbide router bit no. RC-45711 to make very clean cuts through the Oramask 813 into the wood. The bit carves through the mask perfectly leaving no cleanup work, especially with the cleanup pass built into the @vectricltd software. Oramask 813 was applied to the piece before it was carved each time. Painted with General Finishes Sunglow Milk Paint, it dries quickly and limits any bleeding. Finished with Helmsman Sparurethane. ToolsToday provided product.
Feed, Speed, Chip Load & Step Down CNC Running Parameters
Amana Tool In-Tech™ Series Insert Carbide V Groove 90 Deg x 11/16 D x 1/4 Inch SHK Single Flute Router Bit no. RC-45711
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Max Depth of Cut: 0.25"
www.toolstoday.com/v-10600-rc...
Oracal ORAMASK 813 Stencil Film 12 Inch Wide x 20 Foot Long Roll
www.toolstoday.com/v-14855-or...
General Finishes Milk Paints and Stains
tinyurl.com/paint-stains-tt
STEPCRAFT M.700 28" x 36" CNC Machine
tinyurl.com/stepcraft-m700-tt
** Subscribe - / toolstoday
** Shop the website - www.toolstoday.com
** Like at Facebook - tinyurl.com/toolstoday-facebook
** Follow on Instagram - / toolstoday
** STEPCRAFT Machines - www.toolstoday.com/cnc-machin... - วิทยาศาสตร์และเทคโนโลยี
The little girl is the best part of the video. Love the sign too.
I came for painting tips, but Caity won me over completely. Adorable!
Can't wait for our CNC to arrive and try out something similar😄
Congrats on your purchase!
Great idea with the pencils. Thanks for sharing!
What a terrific project! Totally worth the smiles you got. I was wondering about layering the oramask and how well it would be cut. Amazing! I need that bit!!
The Oramask cuts surprisingly very well.
Looks like a great sign and a happy little girl. I seem to have issues with oramask peeling up especially when I do small text.
Nice project, cute kid too!
Thanks!
Of the OraMask peels off, you can cover it with liquid gum. Just attach it with a fine brush. I used it at a long time ago when I did Airbrush. After it dried out, you can also peel it off like the Oramask. Pebeo Drawing Gum.
Best kind of sign you could make ….for that little baby girl
Greetings from Santiago ,Chile.
A new subscriptor here.
Nice✌️
Does Fusion 360 have a way to carve with a V-bit for sharp corners?
We personally haven’t done it, but do believe Fusion 360 has a v-carve option.
Did you use the feeds posted in description? I was just using the same bit for oak and was getting some chatter using the default speeds. I'm guessing that being a harder wood I should have slowed it down a bit?
Yes I did. On harder woods, you can keep the speed and feed the same, just lower your depth per pass, that should eliminate any chatter.
Nice video.
Thank you!
My oramask came off the stained wood I carved in. How do I avoid that?
It may have helped to not stack the masking. Remove and replace.
How much are the videos of the cutting sped up?
Hello, I have serious problem with the balance after change side on knife for amana rc-45711. Can you give me advice how to fit it right please
Please contact my support team by calling toll free, (888) 699-3939 you can also email, ttsupport @ toolstoday.com
Are you able to cut 0.25" at a time with that V-bit?
Max Depth of Cut: 0.25"
What’s the name of the blue paper you use to mask
What kind of double stick table are you using
XFasten Double Sided Woodworking Tape, we sell it here toolstoday.com/xfasten-double-sided-woodworking-tape-3-pack-w-yellow-backing-1-inch-wide-x-36-yards-108-ft-per-roll.html
🥰
What did
Thanks
Had stroke so can't free hand anymore
عسل