I have a 2019 jeep cherokee 3.2 your video gave me the confidence to change my coils and spark plugs from start to finish was 2 hours 23 minutes. I bought the gaskets however didn't need to replace. You will need a very deep spark plug socket it will help especially on the rear plugs removal. Thank a lot
How difficult of a job is this for the average person? It doesn't look terrible but sensors can be difficult. What would you guess to charge someone to do this and change one spark plug?
13 in/lbs, or 1 ft/lbs. If you don’t have a torque wrench, do NOT overtighten. It is ridiculously low torque so you may not feel it click. Go very lightly
Blah, new vehicles. I guess nothing could really be worse than doing spark plugs on my Subaru. It’s about 3 hours for a trained mechanic to do 4 spark plugs. You could cut my fuel economy in half gladly if I could just fit my hand in there to switch a light bulb with having to go through a wheel well or anything.
Nice video. Sure wish the access to the engine compartment and fixing things were as easy and quick as they were in the 60's and 70's
I have a 2019 jeep cherokee 3.2 your video gave me the confidence to change my coils and spark plugs from start to finish was 2 hours 23 minutes. I bought the gaskets however didn't need to replace. You will need a very deep spark plug socket it will help especially on the rear plugs removal. Thank a lot
Can't you just use a plug socket with an extension?
@@Delta75Bravo Yes just look at the one in the video
By far....THE BEST DIY VIDEO EVER!!!! 💯💯💯💯💯 TYSM!!! 🫶🫶🫶🙏🙏🙏❤️❤️❤️
Ive got to replace my oil cooler and while im in there i figured i’d change the plugs too
Like'n the spark plug removal socket. Is it a Mopar product?
good cept that side bolt with wire stuck on it / didnt show it being untightened with 13 mm wrench
Whats the part number on the upper intake gaskets, if i may ask?
Anyone know the part number for the upper manifold bolt(8mm)?🎉
How difficult of a job is this for the average person? It doesn't look terrible but sensors can be difficult. What would you guess to charge someone to do this and change one spark plug?
The shop wanted to charge me 1100.00 for this work. I can't believe that going to do myself.
4:03
Did you break the plastic cover off that screw brother
TORQUE SPECS ON PLUGS?????????????????????????????????????????????????????????????????????????????
13 in/lbs, or 1 ft/lbs. If you don’t have a torque wrench, do NOT overtighten. It is ridiculously low torque so you may not feel it click. Go very lightly
@@telfoyt5440 thx
It’s 20ft lbs
Promo>SM 🤘
Blah, new vehicles. I guess nothing could really be worse than doing spark plugs on my Subaru. It’s about 3 hours for a trained mechanic to do 4 spark plugs. You could cut my fuel economy in half gladly if I could just fit my hand in there to switch a light bulb with having to go through a wheel well or anything.