Davin, my good man: Oof, you Chevy boys.... :-) That thar 440 oils through the rocker shafts, not the pushrods. In fact, there is quite the different oiling system in that engine you might want to investigate because that's the biggest thing that can derail a 440 build - oiling. Critical stuff. Other than that, the forged crank, the block, all of it is pretty much freight train bulletproof. Have fun! -Ed on the Ridge
Wait....this guy didn't know the difference between the MOPAR and Chevy oiling systems, and he's on a YT video rebuilding this engine? Forget it I don't even wnt to finish the vid. I expect top-level guys when I see these kinds of vids, not people that make major mistakes.
@@davidschmidt6013 Awww come on now, Davin is the MAN. Dude has definite skills and he's rebuilt all sorts of vastly different machinery - yes, sometimes learning on the fly while doing so. That's ok though - we get to go along for the ride free of charge and learn along with him, which I think is a major part of the appeal here. Cheers, Ed
One of your best tear down videos. Earlier videos had the action sped up so much it was hard to take in the details of each part as the parts were removed. This one is Excellent!
I love watching you do the engine tear downs and rebuilding. I also Love that Buick straight 8. One last thing, the date codes on the side of the block for MOPARS are the date, time, and shift the block was cast. Assembly came later, and being from early 1972, that would probably make it a 1973 engine. Hey, Chrysler had produced lot of the forged cranks and when performance went out of fashion, they just used them up.
Just from looking at the outside of the engine it looked like it had been worked on before. With the modified oil pan to what looked like maybe the old vacuum balance tubes on the valve covers ( something that was popular in the 70's & 80's ) to the mismatched heads. I think it is a case of different lots of valve springs mixed than some of them getting too hot because if they got hot enough to change color it would soften them up and change the spring pressure greatly as well and that's easy to check with a spring tester.
January 1972 I was going to school at Denver Automotive and Diesel Collage. Oh I had fun there !!! I am now 67 and just got my first performance car. 2008 Bullitt Mustang # 1925. I have not turned on the radio since the day I bought it. Hoping to install a Edelbrock Stage 1 super charger on it soon. We will see. Thanks for this one !!!
Knew a guy with full body/glass 71 roadrunner, full iron 440 8-71 blower on methonal ran 9s at 5200ft. Granted he was A.S.E. cylinder head expert amd had wet flow bench but still amazing power. Plus after whole season bearings still had coating on them. Amazing engine builder
Stock RB and B mopar oil through the rocker shaft through one passage per side through the block. Minor issue... but that bugged me too. Evidently hagerty needs to do more mopars!
@@Welcometofacsistube - never got those Down Under, we had Hemi-6's by then :) They're nicknamed 'rattle monsters' for the hydraulic lifters habit of leaking down just enough to hear. :D
After the spanking they got in the comments for the way the new liners were fitted, it's gonna be a while, either because the owner will have demanded it be redone correctly, or because they've had to find a fresh block. If the latter, the spin will be "found other issues in testing" rather then "we screwed up".
@@damanifesto - I'm a Cinematographer by trade, from a family of Mechanics and Technicians (my Mother taught me to Drift,.. :D ) - I was taught how to do insert-liners properly, including machining out the carriers for the Disc's on my '66 A body Valiant, and making my own liners to fit in them, with the carriers heated and liners cooled, dropped straight in, never had any issue once seated, cooled, and rebored to match the bearing sizes. Watching them take the hammer to Cast Iron liners,... yeeeeech.
@@damanifesto "I'm not a professional mechanic." Exactly the problem. They probably weren't expecting the whole unprofessional world armchair quarterbacking guys who have been building motors for decades." Not everyone is a shadetree machinist. beating sleeves in isn't ideal, but far from the worst thing you'd encounter in a shop. If you were a professional, you WOULD know that.
As well as the early Hemi he rebuilt, the Buick Nailhead, the Buick straight 8 and the Chevy 216. Surprised he didn’t catch that. Oops, mea culpa moment in the next video I bet.
Hey Davin, I would really love to see you guys work on something a little differrent... The BMC B series 1800 engine is used throughout the world and has a great aftermarket parts community... I would love for you guys to strip one down, do a heap of performance mods and then get it all put back together... then there is the added benifit of having to build a car for it and THEN taking that car to some track days!! there are zero nbegatives to this idea! :)
Hi, I have written before and want to again point out the "Snowball's" coupe is a 1940 not a 1937. The hood is a '37 but the body is a '40. Note all 1937,1938, and 1939 except woodies have the wipers on the roof. This is because the windshield swings open. The "40 is fixed and doesn't open. On the race car there are no holes in the roof but it looks like patches on the cowl where the wipers would have been located. Thanks, George
NC state troopers ran the 440 for a while. I was at the world 600 when Richard Petty debuted the 440. After the race he said it was like driving with a barn door attached to the front of the car.
Whenever I hear Davin say we are going to "tear down" something , it is like listening to chalk screech on a chalk board. While working for Cadillac Division we were working in the engineering shop and I mentioned tearing down something, I was immediately chastised for doing so and informed that a true professional 'disassembles' and 'reassembles'.
I love Mopar "B" engines. Steel crank? Pistons skirts looked low mile. I wonder if the larger CC head has been shaved to make up the difference? 2.08 & 1.88 valves? I sure miss my 1963 Dodge 426 Stage 2.
Exelente trabajo , felicitaciones también por el video tan bien logrado. No sabes las ganas que me dan , de ver cómo arreglarían en tu taller , el motor de mi carro. ! 😅 Los felicito a todos y seguiré viendo todos sus videos. Y espero algún dia conocerlos . Dios los bendiga
Since I watch and comment on all of these wonderful videos I don't feel too guilty making a critical comment. The videography is taken to an art form, which is fantastic, but slow motion of someone scraping off a gasket or poking at sludge in an oil pan really doesn't serve any purpose and begins to irritate after awhile. Slow motion of a complicated activity is very helpful. I hope this comes across as constructive criticism. Thank you for all the effort that goes into making these videos.
My thoughts = $.02 is with 2 different heads one having the blue springs and the other only 1 blue and the rest purple that they had a broke or weak purple spring and replaced it with a later model blue one. Like I said 2 cents..... love what your doin!
This is art, you're doing, mister. I'm a sub', and looking you since Reunion Island (little French Island), and I can assure you, I always enjoy watching your videos, and that little moment at the end, when the engine is purring... it is perfect! I'll have to same same with my engine (EU engine, so, less impressive, but I want to do something that could be as respectful as you when you work on engines).
Hi, as I remember it the 440/383 cylinder head casting numbers were 906 unleaded and 456 leaded, otherwise much the same. Drag racers like the 456 because it is less likely to burn a valve. Or maybe my memory is faulty.
Thats s first for me on doubling the flow numbers is somewhere the horse power, I do wish you would let us see the pistions, cast or forged, I do hope you install the bigger valves, 1.88s and the 2.14s the 3 bolt cam is after market, would like to of seen the numbers, or have the lifts measured.
Always enjoy these videos only problem when you did the model A engine went to fast and took me about 4 attempts to work out how to remove valve springs.....one time when being young and the internet are your worst enemy (Talked to 3 old mechanics who all learnt on those types of engines and were full of great help but not when i said wanted to supercharge it haha)
Davin: When the low compression low-lead / no-lead era was phased in, Mopar reduced comp ratios by moving the wrist pin loacation in the pistons. So your fraternal twin heads should not be a big issue, but if the pistons are original, your '72 vintage block will have a comp ratio slightly over 8 to 1. It won't get anywhere near 600 HP. Obviously the bottom end has been appart... more detective work needed!
I really love and enjoy whatching the process of restoring, you’re the reason why i would like to study any enginering related with cars and motors. Could you please tell me how did you learn? Or do you think is better to learn empirical? Thanks and regards from Mexico.
No mention of the dual row roller chain timing kit? That motor has been done as a tough street engine, bet those heads will show up as mild match-ported.
what does "mild match ported" mean? I know next to nothing about mopars, but was thinking that one of the mismatched heads might be a low compression/emissions head....
@@fleetwin1 Means instead of porting out to larger valves, all that's been done is to match the sizing between all the ports to flow identically, and to ensure there's no stepping up or down in size between the exit of the intake manifold and the port on the head. When added to a proper balancing (as Davin showed in the video), balanced and match ported makes the engine run with less vibration and no uneven loading on the internals, so will run stronger and longer. Even though those heads are different years castings, they're for the same base design, and matching the porting across both heads mean there will be no difference in power made side to side of the engine, assuming the chambers are the same number of cc's volume.
@@frigglebiscuit7484 Just mild work, not super wild. No point going too wild for the street, engine just gets nasty to live with, far easier to build mid range and do it right, then add a clutched blower or a turbo.
Chevy shop was into that motor in the past as any Chrysler guy knows the Rods and caps are stamped on the break line of the rod and cap what number hole they're in.
What pistons and rods are those that needed mallory metal added to the crank? Ballencer is for a steel crank. What numbers were the heads?? Unless you are getting a super deal from your machine shop, it is normally smarter money to buy aluminum heads. I hope you will give us a complete run down of parts in the next video....
I love these videos. Davin, you do an outstanding job explaining & showing. But . . . Davin's producer, perhaps you could get Slow Mo Guys to come film gasket scraping at a million FPS (I never could understand why anybody wants to watch a wrench turn in slow motion).
Was not this engine supposed to be ex Petty? I suspect it may have been rebuilt and the springs checked and replaced. Though different cc chambers are off. As for a nice day? It is cold and pouring with rain here.
The reason why oil goes up the pushrod tube is why would it ever go any other way? You’ve already got galleries around your lifters and camshaft, the pushrod should be hollow, anyways, and you get oil delivered to each rocker arm and valve in the minimum time after startup. Lubricating the rocker shafts means you either have to have tons of galleries going up the head.. or small points of failure where sludge can build up and not just take out one or two rocker arms and valves.. but a whole bank of them.
I owned during my teen years a 1971 dodge charger with a 440 HP engine ,and positive traction. I to this day regret selling it. But at the time in the late 80's i had a burger joint job while in high school and just buying fuel was eating up most of my tiny paycheck. It seemed like i was getting 4 gallons to the mile. Of coarse as a teen with a heavy foot that was expected. Is it normal for your exhaust manifold to glow orange after a run?
Well, Here's what I see. Aftermarket Felpro head gaskets. TRW forged pistons.Probably the six-pack replacement with the valve reliefs, L2295f. Internal balancing (Mallory) on the forged crank. Double roller timing gear set (probably an old TRW part number) Modified windage tray. They never came with all the small holes. Obviously modified oil pan. Someone spent a little bit of money on the bottom end many years ago(70's or 80's) only to top it off with mismatched heads. The 906 has a different runner than the later smog head and you'r off on the CC's by about 8 to 10 cc's unless the heads have been milled extensively. Expect the CC's to be 88cc to 90cc's between the two heads. Keep the block, maybe the crank if you're not stroking, and I don't know why you wouldn't. Everything else is outdated junk. Get a matching set of heads, Pro Gear timing set, and dependable rocker arms like Hughes etc. OK, That was fun.
This is a great series. Looking forward to see the progress of this rebuild. Looks like you'll have to shave the head with the bigger chamber volume to match the smaller one?
This is literally my favorite thing to watch on TH-cam. Always looking forward to the next one, keep it up
Without a doubt.
👍🏻 yep
Ditto
Davin, my good man:
Oof, you Chevy boys.... :-)
That thar 440 oils through the rocker shafts, not the pushrods. In fact, there is quite the different
oiling system in that engine you might want to investigate because that's the biggest thing that
can derail a 440 build - oiling.
Critical stuff.
Other than that, the forged crank, the block, all of it is pretty much freight train bulletproof.
Have fun!
-Ed on the Ridge
Wait....this guy didn't know the difference between the MOPAR and Chevy oiling systems, and he's on a YT video rebuilding this engine? Forget it I don't even wnt to finish the vid. I expect top-level guys when I see these kinds of vids, not people that make major mistakes.
@@davidschmidt6013 Awww come on now, Davin is the MAN. Dude has definite skills and he's rebuilt all sorts of vastly different machinery - yes, sometimes learning on the fly while doing so.
That's ok though - we get to go along for the ride free of charge and learn along with him, which I think is a major part of the appeal here.
Cheers, Ed
I have never seen such a clean workshop...ITS AMAZING!
One of your best tear down videos. Earlier videos had the action sped up so much it was hard to take in the details of each part as the parts were removed. This one is Excellent!
I love watching you do the engine tear downs and rebuilding. I also Love that Buick straight 8. One last thing, the date codes on the side of the block for MOPARS are the date, time, and shift the block was cast. Assembly came later, and being from early 1972, that would probably make it a 1973 engine. Hey, Chrysler had produced lot of the forged cranks and when performance went out of fashion, they just used them up.
You have made a very complicated job look very simple and easy to do. IMO that's because of your wealth of knowledge about what you do. Thank you.
If I needed a old engine rebuilt you guys would be the only one I’d trust to get it done right!!
Just from looking at the outside of the engine it looked like it had been worked on before. With the modified oil pan to what looked like maybe the old vacuum balance tubes on the valve covers ( something that was popular in the 70's & 80's ) to the mismatched heads. I think it is a case of different lots of valve springs mixed than some of them getting too hot because if they got hot enough to change color it would soften them up and change the spring pressure greatly as well and that's easy to check with a spring tester.
I didn't realise that the valve springs stay cold in an engine, you learn something new everyday.
Love your vids bro.
January 1972 I was going to school at Denver Automotive and Diesel Collage. Oh I had fun there !!! I am now 67 and just got my first performance car. 2008 Bullitt Mustang # 1925. I have not turned on the radio since the day I bought it. Hoping to install a Edelbrock Stage 1 super charger on it soon. We will see. Thanks for this one !!!
Knew a guy with full body/glass 71 roadrunner, full iron 440 8-71 blower on methonal ran 9s at 5200ft. Granted he was A.S.E. cylinder head expert amd had wet flow bench but still amazing power. Plus after whole season bearings still had coating on them. Amazing engine builder
Fred Flintstone looks to have had in a hand in that oil-pan modification. I can smell scorched oil just watching it come off.
Looked a bit rough, home made deep pan, noted the Crank Scraper / Windage Tray that came off too, common mods for a strong 'street' engine.
Another one of my favorite channels! I enjoy how things get done!
Finally a Mopar
Top oils thru the rocker shafts I believe.
Stock RB and B mopar oil through the rocker shaft through one passage per side through the block. Minor issue... but that bugged me too.
Evidently hagerty needs to do more mopars!
@@icebluecuda1 same goes with Slant Six, and the rockers in the 3.3 & 3.8 V6. Oil through hollow shaft and out to rockers. Simple, and it works.
@@PiDsPagePrototypes what's ac3.3 and a 3.8.?.? 223, and a 258.?
@@PiDsPagePrototypes not hydraulic lifter slants
@@Welcometofacsistube - never got those Down Under, we had Hemi-6's by then :)
They're nicknamed 'rattle monsters' for the hydraulic lifters habit of leaking down just enough to hear. :D
Thanks for taking the time to do these. They are incredible video's.
Always a treat to watch Davin at work.
Thank you and keep the vidoes coming.
I love these tear downs.
Still waiting on the rest of the buick strait 8 build
After the spanking they got in the comments for the way the new liners were fitted, it's gonna be a while, either because the owner will have demanded it be redone correctly, or because they've had to find a fresh block. If the latter, the spin will be "found other issues in testing" rather then "we screwed up".
@@PiDsPagePrototypes Absolutely mortified to see cylinder liners banged in like that, and I'm not a professional mechanic.
You and me both
@@damanifesto - I'm a Cinematographer by trade, from a family of Mechanics and Technicians (my Mother taught me to Drift,.. :D ) - I was taught how to do insert-liners properly, including machining out the carriers for the Disc's on my '66 A body Valiant, and making my own liners to fit in them, with the carriers heated and liners cooled, dropped straight in, never had any issue once seated, cooled, and rebored to match the bearing sizes.
Watching them take the hammer to Cast Iron liners,... yeeeeech.
@@damanifesto "I'm not a professional mechanic." Exactly the problem. They probably weren't expecting the whole unprofessional world armchair quarterbacking guys who have been building motors for decades." Not everyone is a shadetree machinist. beating sleeves in isn't ideal, but far from the worst thing you'd encounter in a shop. If you were a professional, you WOULD know that.
Thanks for posting and sharing! Someone sounds pleased and excited. Am I just imagining? 👌👍
Yes sir engine numbers are important to me, I do appreciate your video, it was great. Looking forward to the inspection and rebuild.
Always interesting to watch. You have every motor heads dream job. 👍😁
This is the best thing to watch in youtube ,I always wonder when ever I watch your time lapse videos
THIS ENGINE IS HEAVY🏋🏾♂️🏁💯
So glad you guys are finally doing a Mopar again!
No push rod oiling chevy guy! Rocker shafts
Yeah I was going to say they oil though the head and up into the rocker shaft just like a LA SBC engines do
Slants and 3.3/3.6 are the same too. MoPaR method.
Oddly, so are mid-60's to mid-80's Renault four cylinders.
As well as the early Hemi he rebuilt, the Buick Nailhead, the Buick straight 8 and the Chevy 216. Surprised he didn’t catch that. Oops, mea culpa moment in the next video I bet.
@@mikec9112 not really
Hey Davin, I would really love to see you guys work on something a little differrent... The BMC B series 1800 engine is used throughout the world and has a great aftermarket parts community... I would love for you guys to strip one down, do a heap of performance mods and then get it all put back together... then there is the added benifit of having to build a car for it and THEN taking that car to some track days!! there are zero nbegatives to this idea! :)
Hi, I have written before and want to again point out the "Snowball's" coupe is a 1940 not a 1937. The hood is a '37 but the body is a '40. Note all 1937,1938, and 1939 except woodies have the wipers on the roof. This is because the windshield swings open. The "40 is fixed and doesn't open. On the race car there are no holes in the roof but it looks like patches on the cowl where the wipers would have been located. Thanks, George
You guys need to understand that those time lapse videos really inspire the kids watching.
This guy is the best wish i could do my car engine like this guy wow keep it up
Once again. Thank you for sharing. 🇨🇦😎
That shadetree oil pan though! 😬
Yeah, that has got to go.....
Seen a lot of oil pans fail.. have we?
Sweet, I have a feb 71 night shift block in my 81 crew cab.
NC state troopers ran the 440 for a while.
I was at the world 600 when Richard Petty debuted the 440. After the race he said it was like driving with a barn door attached to the front of the car.
YES finally another rebuild!
Whenever I hear Davin say we are going to "tear down" something , it is like listening to chalk screech on a chalk board.
While working for Cadillac Division we were working in the engineering shop and I mentioned tearing down something, I was immediately chastised for doing so and informed that a true professional 'disassembles' and 'reassembles'.
People tend heavily to feel more or less important, depending on what vocabulary is used. It's stupid, childish and weak, but that how we're made.
The blue springs may not indicate heat. Just that someone may have changed on them at some point in the past.
Davin you legend you are so inspiring keep up the great work
Nice episode great content as always
I love Mopar "B" engines. Steel crank? Pistons skirts looked low mile. I wonder if the larger CC head has been shaved to make up the difference? 2.08 & 1.88 valves? I sure miss my 1963 Dodge 426 Stage 2.
I was wondering the same thing
Jan 3rd, 1972 was a Monday (nightshift) they were all hungover or still drunk from the weekend when they made that block :D LOL
It had an aftermarket camshaft in it already. 440 had one bolt holding the timing gear on originally. The hemis had 3.
Exelente trabajo , felicitaciones también por el video tan bien logrado. No sabes las ganas que me dan , de ver cómo arreglarían en tu taller , el motor de mi carro. ! 😅
Los felicito a todos y seguiré viendo todos sus videos. Y espero algún dia conocerlos . Dios los bendiga
Love the slow motion sounds and voices. Too funny.
Since I watch and comment on all of these wonderful videos I don't feel too guilty making a critical comment. The videography is taken to an art form, which is fantastic, but slow motion of someone scraping off a gasket or poking at sludge in an oil pan really doesn't serve any purpose and begins to irritate after awhile. Slow motion of a complicated activity is very helpful. I hope this comes across as constructive criticism. Thank you for all the effort that goes into making these videos.
I thought the fast motion at the end of the video was very entertaining.
Great video. I like such videos from your Chanel so much. Thank you.
THIS IS WHAT I'VE BEEN WAITING FOR ! COOL STAFF IS GOING ON
Can't wait for reassembly oh how those bolts fly.
Heyy Davin,please start making those engine rebuild timelapses..i am waiting to watch them all😊
I’ve been really enjoying your channel. Just came across it.
Can't wait will be ready for the next video
Awesome tear down!
Love that oil pan
In the grand scheme, not too bad!
Nice job Davin. 🍺🍻
Keep well mate. Fan, Sydney Australia. 😊
Some of us would rather you use power tools to disassemble than the time lapse hand tools ,it's basically the same thing without commentary 👍
That thing is clean on the topend inside regular oil changes
My thoughts = $.02 is with 2 different heads one having the blue springs and the other only 1 blue and the rest purple that they had a broke or weak purple spring and replaced it with a later model blue one. Like I said 2 cents..... love what your doin!
Very nice video again thanks for it I love this channel thanks for every video
Me encanta como haces tu trabajo, eres excelente, saludos desde Venezuela..!
Hi from Russia.
The best video as usual.
This is art, you're doing, mister.
I'm a sub', and looking you since Reunion Island (little French Island), and I can assure you, I always enjoy watching your videos, and that little moment at the end, when the engine is purring... it is perfect!
I'll have to same same with my engine (EU engine, so, less impressive, but I want to do something that could be as respectful as you when you work on engines).
Hi, as I remember it the 440/383 cylinder head casting numbers were 906 unleaded and 456 leaded, otherwise much the same. Drag racers like the 456 because it is less likely to burn a valve. Or maybe my memory is faulty.
Thats s first for me on doubling the flow numbers is somewhere the horse power, I do wish you would let us see the pistions, cast or forged, I do hope you install the bigger valves, 1.88s and the 2.14s the 3 bolt cam is after market, would like to of seen the numbers, or have the lifts measured.
Two different heads, Snowballs story gets even better
Always enjoy these videos only problem when you did the model A engine went to fast and took me about 4 attempts to work out how to remove valve springs.....one time when being young and the internet are your worst enemy (Talked to 3 old mechanics who all learnt on those types of engines and were full of great help but not when i said wanted to supercharge it haha)
Davin: When the low compression low-lead / no-lead era was phased in, Mopar reduced comp ratios by moving the wrist pin loacation in the pistons. So your fraternal twin heads should not be a big issue, but if the pistons are original, your '72 vintage block will have a comp ratio slightly over 8 to 1. It won't get anywhere near 600 HP. Obviously the bottom end has been appart... more detective work needed!
those valve relief pistons did not come stock on 440s.
What happened to the straight 8 you were working on at the start of the pandemic?
I really love and enjoy whatching the process of restoring, you’re the reason why i would like to study any enginering related with cars and motors.
Could you please tell me how did you learn? Or do you think is better to learn empirical?
Thanks and regards from Mexico.
No mention of the dual row roller chain timing kit? That motor has been done as a tough street engine, bet those heads will show up as mild match-ported.
what does "mild match ported" mean? I know next to nothing about mopars, but was thinking that one of the mismatched heads might be a low compression/emissions head....
@@fleetwin1 Means instead of porting out to larger valves, all that's been done is to match the sizing between all the ports to flow identically, and to ensure there's no stepping up or down in size between the exit of the intake manifold and the port on the head.
When added to a proper balancing (as Davin showed in the video), balanced and match ported makes the engine run with less vibration and no uneven loading on the internals, so will run stronger and longer.
Even though those heads are different years castings, they're for the same base design, and matching the porting across both heads mean there will be no difference in power made side to side of the engine, assuming the chambers are the same number of cc's volume.
@@fleetwin1 906/452 heads flow identical. 906 just dont have hardened seats. both were around 80cc, which tells me they may have been shaved.
@@PiDsPagePrototypes probaby had the bowls opened up too.
@@frigglebiscuit7484 Just mild work, not super wild.
No point going too wild for the street, engine just gets nasty to live with, far easier to build mid range and do it right, then add a clutched blower or a turbo.
Chevy shop was into that motor in the past as any Chrysler guy knows the Rods and caps are stamped on the break line of the rod and cap what number hole they're in.
"Will go really well on this 1971 block based on the date code".... as the camera pans across the 72 casting date....
What pistons and rods are those that needed mallory metal added to the crank? Ballencer is for a steel crank. What numbers were the heads?? Unless you are getting a super deal from your machine shop, it is normally smarter money to buy aluminum heads. I hope you will give us a complete run down of parts in the next video....
This is a cool project, can't wait for the slo-mo finish :)
Nice motor home engine you got there buddy.
And? Still blow your Honda away son
and? dulcich made 438hp on a motorhome 440 with just a intake, cam, and headers.
Saludos desde Mexico muy buenos videos muy buen trabajo....
I love these videos. Davin, you do an outstanding job explaining & showing. But . . . Davin's producer, perhaps you could get Slow Mo Guys to come film gasket scraping at a million FPS (I never could understand why anybody wants to watch a wrench turn in slow motion).
Diggin the intro.
My fav engine -
Was not this engine supposed to be ex Petty? I suspect it may have been rebuilt and the springs checked and replaced. Though different cc chambers are off.
As for a nice day? It is cold and pouring with rain here.
Really good video , i'm waiting video to repair of the buick fireball 8.
YESSS A CHRYSLERR
The reason why oil goes up the pushrod tube is why would it ever go any other way?
You’ve already got galleries around your lifters and camshaft, the pushrod should be hollow, anyways, and you get oil delivered to each rocker arm and valve in the minimum time after startup.
Lubricating the rocker shafts means you either have to have tons of galleries going up the head.. or small points of failure where sludge can build up and not just take out one or two rocker arms and valves.. but a whole bank of them.
theres just two oil galleys supplying each rocker shaft....calm down. besides, shaft rockers are far better than pedestal or stud mount.
If this channel was strictly about engine rebuilds I would subscribe but it's not it's versatile
Windage tray and double row chain/gears, must be originally an HP engine. What kind of crank does it have?
I owned during my teen years a 1971 dodge charger with a 440 HP engine ,and positive traction. I to this day regret selling it. But at the time in the late 80's i had a burger joint job while in high school and just buying fuel was eating up most of my tiny paycheck. It seemed like i was getting 4 gallons to the mile. Of coarse as a teen with a heavy foot that was expected. Is it normal for your exhaust manifold to glow orange after a run?
Those springs could have been replaced with another brand or something since it has been apart before
Bingo! Springs would never change colour from heat like that.
Didn’t chrysler have “purple springs” aka=stiffer and blue being stock springs
Well, Here's what I see. Aftermarket Felpro head gaskets. TRW forged pistons.Probably the six-pack replacement with the valve reliefs, L2295f. Internal balancing (Mallory) on the forged crank. Double roller timing gear set (probably an old TRW part number) Modified windage tray. They never came with all the small holes. Obviously modified oil pan. Someone spent a little bit of money on the bottom end many years ago(70's or 80's) only to top it off with mismatched heads. The 906 has a different runner than the later smog head and you'r off on the CC's by about 8 to 10 cc's unless the heads have been milled extensively. Expect the CC's to be 88cc to 90cc's between the two heads. Keep the block, maybe the crank if you're not stroking, and I don't know why you wouldn't. Everything else is outdated junk. Get a matching set of heads, Pro Gear timing set, and dependable rocker arms like Hughes etc. OK, That was fun.
I like the time laps videos better. But still a cool video
Is the Block (or Heads) from Richard Petty? I remember "Snowball" said that he got a lot of parts and pieces from him, mostly 426 , but...???
The heads on the 355 in my Laguna are off of two different log trucks.
What is your favorite part of a engine tear down thanks?
Hey you have some great music in your videos. Who makes it?
This is a great series. Looking forward to see the progress of this rebuild. Looks like you'll have to shave the head with the bigger chamber volume to match the smaller one?
Defiantly not a stock, or after market oil pan... o_0 Someone had a lovely time welding that modern art form together... >_
Such a stud
Interesting. Cheers guys 👍
3:35 Unless it’s a magnum motor, Chrysler engine valve trains are not oiled through the pushrods.
FIRST!
Also, I absolutely LOVED the Retrowave intro! please never stop!!
New Hagerty video; Thumbs up, grab a beer, hit play.