Hydraulic Vehicle Car Ramps Review
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Get it here... geni.us/UWfWr
Or here... geni.us/wP7oRuZ
Get it in red here... geni.us/M2F5p0
Get a copy of my book here… geni.us/qwbZAE
Visit My Amazon store... ----------
LET'S TALK ABOUT LIVING BETTER:
▶ Podcast: geni.us/FtGAT4
▶ My Amazon Store: www.amazon.com...
----------
IF YOU'D LIKE TO SHOW SOME LOVE:
▶ Buy My Book: geni.us/qwbZAE
▶ Become A Channel Member: geni.us/AA3Jk
▶ Patreon: / petervonpanda
▶ Merch: petervonpanda....
▶ Free Panda Group: panda-research...
FOLLOW MY OTHER SOCIAL MEDIA PLATFORMS:
▶ Instagram: / petervonpanda
▶ Facebook: / petervonpanda
----------
As an Amazon Associate, I earn from qualifying purchases.
Aebitsry Pair Hydraulic Vehicle Car Ramps 10,000lbs Capacity Portable for Car Repair
by Aebitsry
【Maximum Weight Capacity】- Aebitsry Hydraulic Vehicle Ramps can lift up to 10000lbs
【2019 Newest Material】- Made of high quality steel, painting, Aebitsry Hydraulic Car Ramps is durable
【Appication】- Universal For Car Vehicle Repairing, popular with car repairer
【Portable & Fast Shipment】- It is Portable for vehicle repairer. It is worth mentioning that Our Product's Stock on the US, so it is fast and good shipping service
Hydraulic Car Vehicle Ramps
For Car Repairing
Portable & Easy to Remove
The total Weight of pair of these ramps is aboout 75lbs (34kg)
Maximum Weight Capacity: Can lift up to 10000lbs
Jack: 5 ton hydraulic jack jack built into each ramp
Material: steel with painting
Size:
The Size of Bottom:
Max Length of Bottom: 45 inches (114.3cm)
Width of Bottom: 10.6 inches (27cm)
The Range of Lift Height
Max Lift Height: about 15 inches (37.5cm)
Min Lift Height: 9.8 inches (25cm)
The Size of Platform that the tires rest on:
Length of Platform: 12 inches (30.5cm)
Width of Platform: 9.5 inches (24.2cm)
Package included: A Pair Car Ramps
Portable Vehicle Ramps Hydraulic Car Repair Auto Truck Tools Heavy Duty 10,000lb Capacity
by Cr
10.8 in. Height when the jack all the way down
Width Of Bottom :13.3 inches
Max length of bottom :44.9 inches
Width of Top : 11.4 in. Width of Platform :9.4 in
10,000 lb GVW capacity
Factory Defective Items:
- Refunds issued for defective items will be for the full purchase price of the item.
- If a replacement is requested, there will be no additional cost for shipping the replacement if your item is found to be defective
Product Description:
1. 12 months warranty.
-2. Max lift height: 15 inches
3. 10,000 lb GVW capacity
4. Hydraulic Ram Hydraulic
Stark Auto Ramp Low Profile Car Lift Service Ramps Truck Trailer Garage Automotive Hydraulic Lift Repair Frame (Red)
by Stark USA
Perfect for all under-vehicle maintenance and inspections. Long, lasting and durable construction for a long service life. Supplied complete single service ramp for this deal
Extended length works great for lowered sports cars that would bottom out on most standard car ramps
High quality heavy duty vehicle maintenance ramps. Heavy duty steel construction for high durability and strength
No more trying to struggle getting a hydraulic jack under a lowered vehicle for service or scraping the front clip of a lowered car with standard car ramps
Min Lift Height: 5.9 inches, Max Length of Bottom: 44.9 inches; Width of Bottom: 13.3 inches; Width of Top: 11.4 inches; Width of Platform: 9.4 inches; 10,000 lb GVW capacity
Stark Mini-Lift car ramps are designed to do what most standard car ramps cannot, lift lower clearance vehicles like many of today's sports cars. No more trying to struggle getting a hydraulic jack under a lowered vehicle for service or scraping the front clip of a lowered car with standard car ramps
Feature:
Ideal for professional garage use as well as at home on the drive
Perfect for all under-vehicle maintenance and inspections. Long, lasting and durable construction for a long service life. Supplied complete single service ramp for this deal
Extended length works great for lowered sports cars that would bottom out on most standard car ramps
Mini-Lift car ramps are designed to do what most standard car ramps cannot, lift lower clearance vehicles like many of today's sports cars
High quality heavy duty vehicle maintenance ramps. Heavy duty steel construction for high durability and strength
Long, lasting and durable construction for a long service life
No more trying to struggle getting a hydraulic jack under a lowered vehicle for service or scraping the front clip of a lowered car with standard car ramps
5 ton hydraulic jack jack built into each ramp provides greater flexibility
Specifications:
Color: Red
Material: Steel
Max Lift Height: 15 inches
Min Lift Height: 5.9 inches, Max Length of Bottom: 44.9 inches
Width of Bottom: 13.3 inches
Width of Top: 11.4 inches, Width of Platform: 9.4 inches; 10,000 lb GVW capacity
Whenever I drive my maserati up on ramps, I try to do it as fast as possible. If you ain't livin on the edge, ya ain't livin
I came to the comments hoping for this.
3:09 Dude was THIIIIS close to having a bad day. Holy hell that gave me so much anxiety.
yes man, same here. you need an extra lip that extends the base a bit further so that the wheel doesnt shift the ramp like that.
Same thought here. It looked like he raced them up the ramp though. I go up the ramps much slower.
Pro tip, Do not stick anything in between the frame and the pan that holds the tire as its lifted up. If the jack fails, Youll lose your hand or whatever is in between it and the frame.
I just left the same comment before reading yours.
Surely the safety pin will stop it from dropping?
@usmanalinotlate in the video the guy should have put his hand in from underneath the frame to put the safety pin in. Not between the frame and pan. Because the hydraulic lift mechanism can fail at any point.
Safety Note: Whenever Driving a Car Up on Car Ramps Frontwards or Backwards to Raise the the Car you should always have the Drivers Door Open, then Hang out of the Door a Little Bit, this will allow you to "Visually See how far the Car is Going Up on the Ramps" helping you to see that the vehicle doesn't "Drive off the Ramps..!!!!.... As seen in the Video on the Passenger Side of his Car he "HE ALMOST DROVE THE CAR OFF THE CAR RAMP" which would have been "VERY UGLY"..!!!!!!!!
I get an anxiety every time you put the pin in and pulled it out from the top part of the ramp frame 😂
don't be afraid, fear is nothing and he's the one that bleeds and dies... not us...
I got anxiety when he almost overshot and dropped the car on the ramp
Please pull pin from under the bar next time and take it easy going up the ramps. 🙏
@@Resist_JWO_1984. Wow ok there Mr. GrimReaper.
You could either weld an additional stabiliser at the end of the ramp or mark the front with wheel chocks so you don’t overshoot the ramp like you almost did there.
That’s a great idea cuz
Yeah I thought he was going over! 😂🤦♂️
6:00 6:00 6:00 6:00
I was in suspense for a second there myself.
This would be a little bit of work but cheap insurance.
Have a welding shop weld in some bolt down tabs on the corners, position the ramps in the garage, drill holes in the concrete, tap in some lag anchors and bolt these puppies down so the ramps never move.
May I suggest you remove and replace the pins from the underside. The way you did it you risk getting your hands chopped off. Just saying. You loose your hands and you wont ever need the ramps again
That’s a very good point thanks for sharing
You actually should release some pressure to rest the car on the metal pins after you get it where you want it. That way its less change to snap them in half since its already sitting on them.
I came here to say this.
Would be nice to see you drive front end onto ramp to see front bumper clear the ramp without binding
If it did bind the fix is extremely easy
3:08 my heart went out my ass😱
Bro has been living life with his heart hanging out his ass for 2 years now. What a brave survivor. 🫡
This is a great video. I didn't know that this type of jack existed until I did a search for "tall automotive ramps". Your detailing of how they work and what features they have, shows me what is an absolute must when buying them. Thank you!
Glad I could help, Wes!
Lol, glad I'm not the only one, I went on ebay and Typed "Tall Car ramps" because some guy down in town has some that are 4+ foot tall, and then I seen these.
Plastic drive ons are good for pickups.Never want nut on top. If it comes off bolt can drop. If nut fails on bottom bolt still in place albeit loose
So after posting this 3 yrs ago, do you still use them? How have they held up?
Yes. I want to know also.
Ordered a set of these off amazon, one of the jacks was leaking, the instructions were severely lacking, and they wanted to slide out from under the vehicle. To solve that I mounted a 2"X2"X4' long piece of angle on my concrete driveway that the back of the ramps will rest against. Amazon is sending me a replacement jack, but I have decided to not use the factory jacks, and instead use pneumatic jacks instead. I'll use a splitter on my air line, that way I will be able to raise/lower both jacks at once.
i am thinking about the air myself if i buy these, did you do it or how did it work out? thanks
@@stevenakn1 the ramps themselves work
Fine, my problem was with the jacks. I replaced the original bottle jacks with low profile pneumatic jacks, and they work wonderfully.
@syncronisity1 sounds like a good idea thank you.
So when you almost overshot the ramps, the ramps front part came off the ground. If your jacking the car up and it were to roll just a little further back, I would imagine the ramps would lift off the ground even higher and more than likely the car would slide off and defeat the purpose of working on your own vehicle (saving money). This is all IMO of course.
That's what can happen with the plastic rhino ramps also, if you go up a little too far the back raises and the whole ramp collapses. For plastic ramps, the Harbor Freight ones are probably better as they are more solid plastic whereas the Rhino Ramps are made to store inside each other, so hollower and will bend easier.
@@guestguide2544 I bought a pair of those Rhino Ramps, I really don't trust them, What could go wrong, made out of genuine plastic right? Trying to use them on our garage floor with rear wheel drive car, the damn things slide, just not good for me. I think I need to drill in some 1/2 inch bolts in the floor to bolt a 2x4 crosswise to the car and then rest a ramp in front of it, to help with sliding. These ramps look like they would work well as long as you dont overshoot the end .
Peter von Panda, do you still have both arms attached? If so, a bit of advice to you.
Next time you do this, keep your arm in there after you pulled the pin out, then release jacks pressure with another arm. Keep the video rolling, don't screw it up, you only have one chance to record. Post new video on any gore sites.
you almost lost it when driving up the ramp....hahahahaha!
not a safe guy
Yeah man. That almost went south.
bad design also for the ramp, there should be support bars behind the ramp too
I started dying laughing when he almost launched it!!
that would destroy the Maserati for sure... but IF he has boat repair fiberglass in the garage he'll be fine..
Haha, don't call them shear bolts, that's asking for trouble!
Lol
Nice job getting the car on the ramps. I'm always scared that I might drive over the ramps.
This is why car mechanics are around
I think you should also chock the front wheels when you are on so the car cannot go forwards at at.
NEVER STICK YOUR ARM TO SET PINS...
I notice you didn’t drive on forwards, is that because you don’t have enough clearance under the front spoiler to use them for the front of the car?
Probably you can just use a jack tho
You can use them to jack either end, but I'm still using jack stands as backup, I don't trust jacks
Looks like the design could be improved with the jack throw, reminds me of trying to untightening a bolt in a narrow place.
I agree. I prob would modify it at us a small floor jack
I agree, only I would modify it with 2 6inch 10 ton porta power cylinders. That way you could raise and lower them at the same time, by using a splitter off of the pump, wether it be manual or air powered.
Although in all honesty it would probably be cheaper and easier to buy a portable, or stationary drive on low rise lift for your garage.
I thought Maserati owners got the butler to return the car to the dealer when work was needed. :o)
Thanks for showing this! My civic coupe sits low as it is and between that and some ample boobage, the plastic risers didnt give me a lot of clearance for oil changes.
Awesome! Doing oil changes yourself is way better 😁
I always have someone watch me drive up the ramps when possible. Love those ramps.
They are very nice, but on the other hand… For $300 you can buy a monster jack with a crossbar and then wheel stands at Harbor freight for that much… Then you can actually do wheel work as well, Which you can’t do with ramps
I like that idea, but my wife has a Kia K900 and the darn thig is so low to the ground, I dont think that setup would work. I guess these ramps would help.
This brand cheaped out on the quality of the bottle jacks. takes probably 50 pumps to get that jack to be extended all of the way...
good concept, but they need to use higher quality components
I would think these ramps could hold nearly any vehicle you drive, because when you think about it, it is not actually the entire weight of the vehicle you're supporting. It's only the part that's parked over the ramps, maybe half the weight. is this a good assumption?
I think that’s a good assumption depending on the weight bias
Dude!!! Get some sense and when inserting and removing the pin go under the frame and not between it. Or else your friends will start calling you nubs. Even new hydraulics fail and it happens more often than you'd like to think!
yes i seen it he send his
hand between it . dengoros.
@@wjsvdjsgs4579 I generally don't call people out stuff much. But when your doing videos on how to do things you have a personal responsibility to show the proper way. Or at the very least say im a dumbass dont do what I do. Lol
@@kickazz9473 yes i am agreed your idea.
I dont know what you mean
go under the frame and not between it.????
@@martinkulik9466 put your hand inder the frame of the car when removing that pin. Not between it so if it fails and car falls you dont lose a hand.
That’s a lot of faith in that chinesium built ramp set 😅.
Did you ever use these forwards ( low profile)…? Just thinking of buying these. Look great!
Overshooting ramps is always the biggest PITA of the process.
Hey man, Big kudos for getting a Maserati Sport coupe instead of one of those terrible 4-door/family models!
Hmm, the problem I see is if you wanted to use this for any engine work, it's not going to happen on a car with how high those ramps are. There's no way the front lip could clear that, most barely (if at all) clear those gray plastic ramps, and these are quite a bit taller. You could stack 2x6's or whatever but that gets kinda tedious. Feel like it's fine if you have lots of ground clearance or an SUV or something, but not so much a sports car with a front lip.
Put the pin in from underneath. If that ram gives way at the wrong time it'll take your hand off.
I THINK THESE ARE A GREAT IDEA, BUT NEED IMPROVED DESIGN BY THOSE WHO HAVE ACTUALLY USED THEM..3.09 IS AN EXAMPLE, BUT MAINLY DRIVER ERROR..LOWER RISE AT THE FRONT..I NOTICED HE DIDNT DRIVE CAR ONTO THEM FORWARDS..AND YOU CAN STILL GET I THINK BOTTLE JACKS THAT SCREW UP, SO A DRILL/DRIVER WOULD HELP A LOT IN RAISING CAR ONCE ON..MMMMMM!!
Super Pro tip. Never back your car into a car ramp. You almost wreck your car underneath. You always move forward into the ramp.
not too sure about the extra heith thing, doesnt look too good, the ramp is great though.. it's a really bad design
fantastic vid, thanks, any long term review?
Never reach over to pull the pin, go under
How will they work with my 3 inch low profile 04 mustang GT my bumper always hits when I try to drive up on my ramp
Put the 3 ton model on my wish list as buy later in my Amazon cart.
about $200 on ebay,
I don’t trust the gauge if the flat stock steel used, especially on the sides, I can see the whole ramp crush laterally like a parallelogram. Good idea, but needs square tubing before id buy it...
That would be a good enhancement.
@@petervonpanda Thanks for sharing this.
After several months, any updates or observations?
Also, are you able to drive the front end of a low clearance car onto the ramps?
awesome video and detail on the dimensions. Can you let me know what is the thickness of that steel used for this ramp? Thank you
At $300, one or two shop visits avoided pays for them!
So true!👍 I wasn't seeing it that way.
A good Jack and 4 six ton jack stands will lift the same height and you can work on wheel related things.
A little reckless when you drove your car up there , thought it was going over and gunna scratch your fancy car .
Cool for oil change.
Question: How are you changing brakes rotors struts and things that requires the wheels to be off ?
Btw I'm asking cause I don't know.
Once you raise it up you can place a jack stand somewhere, then lower the ramp pad and remove the ramp. Don't need a floor jack.
@@SnapperHead714 Thank You👍
Very clever designed !
Save space for car repair!
At your own risk, but, ..... If your drive wheels are going up the ramp (Front wheels for FWD, rear wheels for RWD) power brake your way up the ramp. (Rely on the brake, NOT the gas...) (apply brake, give it enough gas to get up the ramp while holding the brake, then lighly let of brake to climb the ramp, using the brake to stop instantly when needed.... WAY safer than using the gas alone to climb the ramp and hoping you hit the brake in time...) Somebody just about had a very bad day....
so you can't change your tires with this lift?
Definitely gonna get this it’ll be useful for my manual swap
3:09... well that was nearly a bad day
It almost became the video titled “I destroyed my car.”
I literally said gasped out loud when that happened like I was watching a horror movie!
This guy is a nice person trying to help other, but he is a liability. First, he over shoot pulling onto the ramp- if you don't know how to du it, just lift the car with a jack and place the ramp under. Second, he put the safety pin at the wrong location, the pin is supposed to go in the pinhole, not on top - however that is bad design as you have to set it right on. Third, you need to rest the car on the pins before working on it - that way your stand holds the car and the jack is your secondary safety.
Thanks for the video anyways.
You need 4 to do oil change for leveling
Peter, this looks like a great product. I have a car, similar to yours that has a very low bumper in the front. My Question, do these ramps work for the front of the car? If not, any suggestions?
If not, ramp extensions.
Interesting never knew they had these.
There is no way in hell that I'd work under a load with a ramp/hydraulic jack of that quality... Buy something of much, much better quality or take the vehicle to a shop...
Gonna for sure get some of these got a exhaust leak in my 03 cavalier prob just replace the complete exhaust and then find me a welder to weld my muffler on for me
I can not for the life of me get the bolts the same way you did with the nut on top of the jack housing. the jack body is too close and there is no room.
could you use four and reverse the whole car up?
Awesome! Thanks!!!
Sweet Car!!! who's looking at the ramps!! okay, Thanks for using a car with big tires so I can get an idea how the tire sits on the landing... I think it will definitely work for a 2020 Highlander Platinum.... (You have to take a bunch of matting / covering off for an O/C)
Fantastic review 👍just bought a pair and don’t come with much instructions
you should have stuck that locking pin from below the platform, because if the hydraulics failed, your hand would be chopped off
Was there clearance for you to drive the front of the car up onto the ramp or did you have to use some wood to start the car on it?
My ass sucked in my shorts when you almost over shot those ramps lol
Can you imagine what mine did while sitting in that drivers seat?
@@petervonpanda probably the same or they got the whole pair lol
that welding......🤬 its death trap!!!!!!!!!!!!!!!!!!☠
The guy should have put his hand in from underneath the frame to put the safety pin in. NOT between the frame and pan. Because the hydraulic lift mechanism can fail at any point.
Any chance of a 3 year update on these ramps? I'm thinking of getting some and would like to see how they've held up over time. Great video!
I don't use them often, but I still have them and used them for my lawn mower this fall!
@@petervonpanda That's more my plan. Bought a new Zero Turn mower this year and these "look" like they'd do the job for getting to the underside of the deck.
Seems like a low profile jack and Jack stands would be cheaper and faster... 🤷♂️
3:09 oho no! what if he reverse a bit more the probably took alot of damage :(
Got pretty close. Luckily they have a lip on the rear edge
My heart stop for a few seconds at that point
@@petervonpanda They do, but you almost tipped the whole ramps.
Be VERY careful as could easily have totalled the car.
Can you help looking for SCOOP and LIMITATION of car Lift Ramp. Thank you🥰
Anyone try these on a truck they say can hold 10,000lbs
in the uk the cheapest I found was 110 pounds a pair I think they are going to be really good
Where from?
@@squidgyblack3321 £179.00 on amazon for a pair...
@@squidgyblack3321 where from
the thing i hate about ramps is that you can overshoot and fall off & the ramp damages the underside or wedges the car.
Especially with manual cars. Ramps always stress me out a bit.
Do this safeky you really need 2 pp and I'd still have jack stands under it for more piece of mind... i dont like the way you have to jack each side up separately.... they need a hose and fitting to combine the jacks and make them either electric or air with manual jack as backup.
Yeah, it's a pain to jump from side to side every few inches. It would be nice if you could pump both simultaneously.
Lol at the cig butt. Looks like a marlboro light sir.
These ramps look awesome ...only issue is, the platform is too narrow. I got 3 cars with 11 inch wide tires.
who cares about looks, IF they work is what matters..
@@zolitariglussey6302 WRONG ... if they look ugly, they dont get purchased. I dont give a shit what it does, if the cosmetics are not there, then they stay where they sit
Wow! Never knew they had these
Looks VERY unsafe. With the type of car you have, you should buy a 4 post or a quick jack. MUCH safer. Hydraulic jacks blow out on occasion.
Now if there was a hydraulic version on 110 with safety catches. Maybe. Also with your low car and mine the low plastic ones are better. I use a 2x10 on approach. Keep my bumper
I was hoping for it to be different than it is
I just built my ramps i feel feel like its better
I can't seem to find 3. anybody give me a link where to buy them.Thanks
Nice death lift
Sounded like thin cheap metal when he almost overshot it. Idk about these
How sturdy is the material used to construct the ramps? I wanna get one but the metal used looks too thin.
The metal is solid and very heavy. Might not look it but it’s beefy!
Nope. I wouldn't use these for a chevy cobalt, and I'm a FORD guy
At 3:10 😬😬,😰, $$$$$ on repairs at body shop !!!
I saw theses ramps for sale online from Lackt.. My question is, They cost 64.88 but does that include both ramps? Then I heard where you mention the price you paid.. Now I really wonder if I would get both for 64.88? It does state a set/pair
Lackt?
Drive slowly upon the ramp next time for your safety and protect your car you almost drove over the edge
got a red set for xmas and 1 jack was leaking fluid and the holes didnt line up DONT BUY! because they are a pain in the ass to send back to seller.
Me after watching this videoand reading the comments,
Ok Google, can you tell me safely how to use a floor jack
Considering purchasing these. But concerned about driving off the end. Any advice? If I do go ahead I want to use axle stands for safety in case of a dead fall.
Go slow and stop once you feel the tire in the bracket, open your door and make sure the stand is flush with the ground, these look super safe..use the safety pins also..Been working on cars for 45 years..
You ever get a weight of each ramp?
How height is ramp?
any update review ?
I haven’t used it a lot but my neighbor borrowed it to work on his Xterra and it seemed to worked fine for him too
@@petervonpanda
Do the feel solid?
send it to orbit, next time go up the ramps faster
My man u got some many ghost spirits in the garage I swear ill send u a cleanse kit u needa use it plz.
Pass 🧐 looks to dangerous , I preferred my wood ramps IMO 🤨 !!!