Hello Thomas, thank you for your work, that's great. Is it possible to do all this offline ? I don't have an Internet connection in my workshop (garage) it would be great to have the same thing in a program installed on my laptop
GREAT tool. Just started 3D printing and this got me up and printing things everyone wants. Thank you so much for a Lithophane Generator that is user friendly, fast, and with great options.....
Awesome tool!! My only suggestion would be to be able to specify an interior or exterior texturing. I'm working on a project that I don't want people to be able to make out the design until the pane is backlit, but the curved option only extrudes the texture on the convex side, and I can't get the texture to extrude on the concave side.
This is a awesome tool! Thanks so much for providing this to us, and for free!!! Are you kidding me 😉 I will donate when I can. I want to become a Patreon and you will be the first person that I will support...
You can print a matching circular lithophane and glue it on if you want. You can flip the lithophane upside down on the build plate and add a disk under it, but there's no way of doing this.
So how can I get rid of the base and top sections? Tried making one similiar to 3DP.rocks and it kept giving me a weird ledge even with 0 for base height 0 and width 0. Also its kinda weird that the sizes change when I adjust the base etc, id like to keep the parameters forX and Y spans, I had to eyeball it against the one I have and then adjust it again in Cura
this is very stressful for me. one day print on box c. 16 hours on litho and they dont match. x and y cant be changed. angle says on cults 120 for box c. that number is incorrect.help please
It looks like you've added a "picture spacing" option since creating this video. I'm not seeing any information as to what that does. Can you shed some light on that?
I'm using this program right now to start trying lithophane prints, and I ran into a question with this. What determines the radius of the curve? Is it scaled to the image in comparison to the height?
![[Lithophane tips] 10 Things I Wish I Knew Before Making Lithophane - 3D Printing](http://i.ytimg.com/vi/3teKRhzTORY/mqdefault.jpg)
what about diameter ? can we adjust ?
Appreciate your website. Making a wedding gift for grandson and bride to be.
Hello Thomas, thank you for your work, that's great. Is it possible to do all this offline ? I don't have an Internet connection in my workshop (garage) it would be great to have the same thing in a program installed on my laptop
my litho is to small for box c that i bought off cults. how do i know what angle to use?
GREAT tool. Just started 3D printing and this got me up and printing things everyone wants. Thank you so much for a Lithophane Generator that is user friendly, fast, and with great options.....
You're welcome! Enjoy
after design. what is your finish model for bottom lamp....i would like to do
Awesome tool!! My only suggestion would be to be able to specify an interior or exterior texturing. I'm working on a project that I don't want people to be able to make out the design until the pane is backlit, but the curved option only extrudes the texture on the convex side, and I can't get the texture to extrude on the concave side.
Hi, every time i try to print one i dont get the base i have tried adjusting it every way but it never comes accross into my slicer
You're amazing, thanks for creating this!
This is a awesome tool! Thanks so much for providing this to us, and for free!!! Are you kidding me 😉 I will donate when I can. I want to become a Patreon and you will be the first person that I will support...
Is there a way within this program to close the top of the design if I make it 360 degrees?
You can print a matching circular lithophane and glue it on if you want. You can flip the lithophane upside down on the build plate and add a disk under it, but there's no way of doing this.
no diameter change why ?
Commenting, liked and subbed! Appreciate your website and tutorials!
i need help.lithopane smaller than box
What input I should put to not have the frame in the 3d model.
Thank You so much for all your information.
So how can I get rid of the base and top sections? Tried making one similiar to 3DP.rocks and it kept giving me a weird ledge even with 0 for base height 0 and width 0. Also its kinda weird that the sizes change when I adjust the base etc, id like to keep the parameters forX and Y spans, I had to eyeball it against the one I have and then adjust it again in Cura
how do i get my angle?
this is very stressful for me. one day print on box c. 16 hours on litho and they dont match. x and y cant be changed. angle says on cults 120 for box c. that number is incorrect.help please
It looks like you've added a "picture spacing" option since creating this video. I'm not seeing any information as to what that does. Can you shed some light on that?
I'm using this program right now to start trying lithophane prints, and I ran into a question with this. What determines the radius of the curve? Is it scaled to the image in comparison to the height?
Any ideas on how to put the lights or lamp behind the lithophane ?
make your own stand :)
When I slice do I have to match my printer resolution to image resolution?
No.
how to finish bottom stand
Do you have a suggested light source for this?
I'd use the same that I use for the spherical lithophane which you can find on its webpage
@@LithophaneMaker Thanks!
@@LithophaneMaker where is this webpage?
Do you have anyother design
Спасибо вам за вашу работу над сайтом !
Have a playpal I could use to send you a donation? I love this tool.
Thanks! I have a patreon or you can tip me through thingiverse
THIS IS AWESOME
bravissimo