Highway robbery, yall should be ashamed of yourselves charging nearly 2k for a box of pieces when we have to build it! Pathetic money grab. It's an off road go kart for christ sakes not a used car. 2k kiss my ass
I bought one of these for $5 about 5 years ago at an real estate auction but the motor was to run around my 15 acre property, I took it home stripped it down painted the frame with Sand colored truck bed liner and then put it back together and threw a 80cc Suzuki dirt bike engine and rear wheel sprocket on it . That thing absolutely rips.
With this kit, you get many levels of value! The ability to customize to your preference, and memories of building and sending it with your kiddo!! I’ve had a few and plan to build more.
I would recommend drilling and taping your spindles for grease fittings. Over the life of the go kart that will add many years of use without unlubed wear on the front end.
A while back I looked for someone selling a full off road DIY kit in the UK and no one was. Some would sell you an engine. Someone else the wheels and steering. Etc etc but nobody had put all the components together in one package. And no welding needed as well.. bonus. You should ship to UK.
Очень классный багги! Всё сделано удобно и ничего лишнего. Порадовала конструкция передней подвески из пружин. Первый раз такое вижу на подобных багги. 👍 Хотелось бы ещё заднюю подвеску увидеть на подобной машине. 🤔
Looks like the steering spindles could use some plastic washers to help it to work a little smoother since it doesn't have a way to hold some kind of grease. Especially with that spring putting pressure down on it. But either way. Cool little set up 👍
⛔️ ⚠️DANGER AT 5:356:05⚠️⛔️ I really hope nobody has and never will try to do that without any face protection….😮😮😢 ”heavy duty protection actually “ That is a really really bad and dangerous way of doing that with very serious harmful injuries results If one side of that strong spring slips out it will fly of really hard and God forbid, if it hits someone’s eye they’ll be one eye blind for the rest of the their life 😢😢 Apart of that, superb job, thumbs up 👍
Brief side note. The steering spindles beak off frequently. I welded a piece of angle iron to the top and cut 1/8 inch off the bottom to compensate. Never had another problem.
That looks like a solid kit but if you are mechanically inclined at all just build your own. No engine included and to ship to a residential area it’s 1299 plus another 450 for shipping. You’ll spend less than that in materials
Love this cart guys, but... all steering and wheel end nuts should be castle nuts with cotter pins. Lock nuts will probably never come lose, but what if they do. Remember, that front left wheel is spinning against the nut. If the wheel bearing fails, it could screw that wheel right off. Would hate to see yall face any trouble. With all that said, I love the simplicity of the kit. No doubt its quality. My 5 year old would love it.
Buenas noches. Muy bueno tú proyecto. Felicitaciones. De casualidad puedes publicar la distancia entre el eje delantero al eje trasero? Y los HP del motor. Gracias Saludos .
Same! I'm building a cammed out stage 4 Propoint 420cc (gx390 clone) for it and gopowersports always seems to have the parts I need even when nobody else has them in stock.
That's a very nice looking go cart I really wish that they had this type of cart when I was younger because I really know that I would of found a way to purchase one for myself for real people for real okay thanks Charles Williams
TH-cam videos? it's not that hard actually. all you'll need is a camera, a Google account(such as the one you commented from, or create a new one Specifically for your audience) & an Audience of course! 😊 there's many videos on here explaining how to start your channel up if you're interested. hope this helps with your future life goals! 👍🏾
Have you guys done a video on "how to chose the right live axle kit for your go-kart" and if not, will you. I wan't to put a live axle on my daughters go kart but I have no idea which to chose from. Thank you...
Looks like I'll need to tear down my rear axel and move the lock collars to the outside of the bearings. Also need bigger risers because those 1" don't raise up a 420/40series enough.
I bet u could weld a washer on top and bottom of the spindle just big enough for that king pin bolt to go through it but tap a grease fitting on the side of it and the u could fill it up with grease👍
Ever had any problems holding the axle sprockets in place with just lock collars? Most things I've read encourage welding as the lock collars can come loose from time to time
The thing that stood out the most was no burs on the metal parts all bolts nuts were easy to thread and all parts actually fit where were they manufactured?
Those lock collars on bearings should turn till tight with rotation. Sounds backward but it's not. Back when they first came out they came with instructions, before you were born.
Vice and four pieces of wire, USWG 22 or so compress spring in vice tie with put in place with bolt trough spindle and spring then cut wires one at a time.
Hope you guys enjoy the kit as much as we do!
wow
Dengan bahan dan peralatan yang lengkap, sangat memadai …👍
You can buy a car for what this thing costs
Highway robbery, yall should be ashamed of yourselves charging nearly 2k for a box of pieces when we have to build it! Pathetic money grab. It's an off road go kart for christ sakes not a used car. 2k kiss my ass
@@luckyhakeem3958❤
I bought one of these for $5 about 5 years ago at an real estate auction but the motor was to run around my 15 acre property, I took it home stripped it down painted the frame with Sand colored truck bed liner and then put it back together and threw a 80cc Suzuki dirt bike engine and rear wheel sprocket on it . That thing absolutely rips.
With this kit, you get many levels of value! The ability to customize to your preference, and memories of building and sending it with your kiddo!! I’ve had a few and plan to build more.
Very true! Thanks for checking out!
I wish that all instructional videos where this well made. Great job guys.
Thank you!
I agree. One of the clearest and most well done videos. Great job.
I would recommend drilling and taping your spindles for grease fittings. Over the life of the go kart that will add many years of use without unlubed wear on the front end.
I love the design of this cart ! If I ever build one, it will be with this kit.
Thanks!
A while back I looked for someone selling a full off road DIY kit in the UK and no one was. Some would sell you an engine. Someone else the wheels and steering. Etc etc but nobody had put all the components together in one package. And no welding needed as well.. bonus. You should ship to UK.
For sure a must buy, I think I'm gonna look into a Honda motor for mine but will probably settle for a 212cc from Harbor freight.
Saya dari Indonesia..dan sedang dalam proses meniru car ini...semoga saya berhasil belajar dari video anda..terima kasih banyak kawan
Party on
Very nice thorough video! Prior to watching this I was totally clueless on the building a gokart but this really helped!
Glad it helped!
Очень классный багги! Всё сделано удобно и ничего лишнего. Порадовала конструкция передней подвески из пружин. Первый раз такое вижу на подобных багги. 👍
Хотелось бы ещё заднюю подвеску увидеть на подобной машине. 🤔
Party on.
The way you’re running through it my boy 😂💯💯 fastest build I seen yet lol gud stuff man .
You already know!
Manco Dingo the holy grail , they Pour the foundation for carting, Badass vintage carts
For sure, we love it.
I’m ordering a 212 tillotson hemi electric start engine, and a 30 series belt for my gokart can’t wait. love what y’all do
Good
Go Power Sports you are a great Company
Thanks!
Why is it that, at age 55, I am still quite certain that I NEED a couple of these?
Because we are Cool and Younger than many 20 year Old Biden Supporter i guess🕶️
ditto!!!!😂😂😂
Because boys don't get older, just more tired
50 here, and I want one too, even though I know getting in it, and out of it, ain't gonna be pretty at all!
Go for it!!!!
incredible work, excellent project and greetings from Guatemala.
I have a vintage mini bike project I need to finish!! Cool stuff !!
*Looks Like a Great Kit!!!*
Wow, awesome kart 👏👏👏
Thank you! Cheers!
Nice job pal.can u give me a price for the kit plus can u ship to Ireland??? Jay....
Projeto muito legal , vou fazer um igual aqui no Brasil valeu
Darn you Taylor!!!! I'm already daydreaming!!
high level of manufacturing 👍
Looks like the steering spindles could use some plastic washers to help it to work a little smoother since it doesn't have a way to hold some kind of grease. Especially with that spring putting pressure down on it. But either way. Cool little set up 👍
You guys are just down the road from me !
my uncle built go carts for sears....he used all american parts....brigs and stratton engines.....welded up the frames...useing american steel...
Sounds like one legit guy!
Love it. Very clear tutorial. Hope i can build one soon out of this video😊😊😊
Much appreciated, thanks for checking us out!
Uma obra de arte
brap brap
Subscribed 🇧🇷😉👍
One stop shopping!!
Another cool build guys
Wow, this is awesome. I need few of them. Thx a lot
Glad you like them!
Передняя подвеска, конечно, жесть. Я уже слышу этот звук стука металла о металл)
I might have to buy this gocart
cool go kart boss
Now All ya Need!!! is a 4stroke 250 KX Dirtbike motor!! & yer' READY!! TO GO!!>>
⛔️ ⚠️DANGER AT 5:35 6:05⚠️⛔️
I really hope nobody has and never will try to do that without any face protection….😮😮😢
”heavy duty protection actually “
That is a really really bad and dangerous way of doing that with very serious harmful injuries results If one side of that strong spring slips out it will fly of really hard and God forbid, if it hits someone’s eye they’ll be one eye blind for the rest of the their life 😢😢
Apart of that, superb job, thumbs up 👍
Brief side note. The steering spindles beak off frequently. I welded a piece of angle iron to the top and cut 1/8 inch off the bottom to compensate. Never had another problem.
Can you provide more detail?
That looks like a good kit. I want to build one a little heavier and more power like a V twin with 22-25 horsepower and high speed.
Indonesia present👋🇮🇩
Nice job boss
This is a good vidio well thought about thanks go power sports
off road with no suspension, sounds fun!
Good work bro
Thank you so much 😀
Awesome build...it’ll probably take me six months to complete this build! 😅😂😂😂
That looks like a solid kit but if you are mechanically inclined at all just build your own. No engine included and to ship to a residential area it’s 1299 plus another 450 for shipping. You’ll spend less than that in materials
I was just about to say. Final price with shipping is out there for a basic kart frame setup only
@@THECHOSENONE-bk7xg ya. Almost 2k is a little much
2k you can get an atv...
Great... The best and simple design bro... 👍
Thank you! Cheers!
No way I have this same frame!!
I would buy one in a heart beat
Love this cart guys, but... all steering and wheel end nuts should be castle nuts with cotter pins. Lock nuts will probably never come lose, but what if they do. Remember, that front left wheel is spinning against the nut. If the wheel bearing fails, it could screw that wheel right off. Would hate to see yall face any trouble. With all that said, I love the simplicity of the kit. No doubt its quality. My 5 year old would love it.
Looks like a well thought out kit! Congrats.
why on earth would they go metric and imperial for the hardware... bad form peter bad form
im sure this is the best kart built but 1500 kart plus 300 to 500 shipping ill pass
Good point Bryan, so with that kind of price, heck I'll just to the local store and purchase one there and bring it back.
For that price, I can purchase rotax 125 senior race kart used
Párabens dá hora vou fazer um também
Bom trabalho, projeto ficou muito bom! Quero fazer agora aqui no Brasil
Sweet. Can’t wait to see full send.
Buenas noches. Muy bueno tú proyecto. Felicitaciones. De casualidad puedes publicar la distancia entre el eje delantero al eje trasero? Y los HP del motor. Gracias Saludos .
Just ordered some parts from you guys for my Coleman haha🤟🏻
Same! I'm building a cammed out stage 4 Propoint 420cc (gx390 clone) for it and gopowersports always seems to have the parts I need even when nobody else has them in stock.
Cant wait to see the next video.looks fun to drive
Looks fun for a little dirt track. But idk about spending almost $2000 after taxes and shipping. Think I just stick with video. Thanks guys
Do you need parts??
That's a very nice looking go cart I really wish that they had this type of cart when I was younger because I really know that I would of found a way to purchase one for myself for real people for real okay thanks Charles Williams
Good thing you can get one now!
I like your project
Expand it to my place too
Good
So jealous. You're doing what I always. dreamed of doing. Great product. Cheers.
TH-cam videos? it's not that hard actually. all you'll need is a camera, a Google account(such as the one you commented from, or create a new one Specifically for your audience) & an Audience of course! 😊 there's many videos on here explaining how to start your channel up if you're interested. hope this helps with your future life goals! 👍🏾
I wish I could just buy this whole kit for my silver fox frame.
72 here and feel the need to
Use an old pair of pliers and weld a washer on each outside of the jaws sticking out. Use to help pinch springs.
Great kit and well explanation video. Just wondering will there be configuration to have a reverse gear mounted to the torque converter?
Best design ever!
Excelente
Bendiciones
WOW JUST A LOT TO IT ALLL...
Right?
Very good job 👍🏻
Сборка отличная, жаль стоит не мало
Good job bro.🔥🔥🔥
Thanks!
Have you guys done a video on "how to chose the right live axle kit for your go-kart" and if not, will you. I wan't to put a live axle on my daughters go kart but I have no idea which to chose from. Thank you...
There are not a lot of options just get one that fits. And get the 4 bolt hubs the extra twisting force whilst turning is not great for the 3 bolt.
Sass’s
Looks like I'll need to tear down my rear axel and move the lock collars to the outside of the bearings. Also need bigger risers because those 1" don't raise up a 420/40series enough.
Just buy 2 more and add them to the outside
Did u put a 420 on this exact kart?
Did u put a 420 on this exact kart?
@@jimjim129 yes sir
@@jimjim129 yeah, I have a couple of vids on my page.
I bet u could weld a washer on top and bottom of the spindle just big enough for that king pin bolt to go through it but tap a grease fitting on the side of it and the u could fill it up with grease👍
Nice 👍🙂🙏
Thanks 😊
I am impressed and the video is very good
nice job sir👍
é melhor projeto que já. para ser tão simples. você vende esse projeto ?
Ever had any problems holding the axle sprockets in place with just lock collars? Most things I've read encourage welding as the lock collars can come loose from time to time
Is it the responsibility of the purchaser to finish weld the axle bearing hangers?
Hey that’s faster than cars and cameras !!!!!! Kool shit man .... But man I learn a lot from them as will.... how much is that kit????????$$$
Roughly $2k I have kits in store ready for purchase and shipment
Nice job!
Great work.
Good
I like it
Thanks for checking it out!
The thing that stood out the most was no burs on the metal parts all bolts nuts were easy to thread and all parts actually fit where were they manufactured?
The Frame and Hardware came from the USA.
Nice work brother 👍👍👍
Nice I have something like that but my opinion I rather the old thunder ⚡ carts.the belt doesn't do good on grass.but gokart are fun..
Fair enough!
5hp n up will do I rode the chainsaw motors man there fast!😊
Those lock collars on bearings should turn till tight with rotation. Sounds backward but it's not. Back when they first came out they came with instructions, before you were born.
I agree I not fan of those type wheel bearing I perf them with spacer in side
I prefer to use pillow blocks on my kart instead flanged bearings.
Great job Taylor
Why not washers on tie rod end instead of lock washers? I don’t trust not putting lock nut on tie rod end at axle
im soo getting it
trabalho magnífico, parabéns
hello, very good congratulations! Do you have a drawing with the measurements of the structure?
Love that you love it!
I sure wish u could supply a catalog
Can you sub out the knobbies for slicks in the kit?
You if you purchase this kit as a roller.
Отлично 🎉
Vice and four pieces of wire, USWG 22 or so compress spring in vice tie with put in place with bolt trough spindle and spring then cut wires one at a time.
Would love to build one of these. I’m 6’ 2” tall and don’t believe I could fit well with this kart.
Is that not the same as the old dingo cart from 35 years ago I bought one and still have it with all the modification to make it a real cart
It is mocked up for the Manco American Express.
Wish u guys had a shop in Canada was gonna order some parts but shipping was twice the cost of what I wanted
What do you need???