@@cthx4583 no I wanted to copy this guys build but he gave absolutely no resources for all the parts he used let alone a simple schematic for the frame… just another TH-camr trying to scam ppl into buying their crap
New subscriber you are incredible, I have a similar project together with my father and you have motivated me to continue thanks greetings from Celaya Mexico 🇲🇽👋🏽
Hey! So usually I buy from my remnants section at the local metal shop! They charge 1.49 a pound and I would probably us anywhere from 80-150 lbs of metal on a kart! I love to use the square 1x1 tubing! And it usually cost about $1.8-2.25 per foot. I would usually use like 36-50 feet for a project like this. Sheet metal can range but a 4x4 sheet of thin gauge metal might run you like $40-70! Let me know if you have any other questions!
Use a contact tip on the end of the welding gun, it will structurally make your welds safer since it would actually direct the shielding gas at your weld
Is there a reason you chose the same tire width front and back? I’d go for something smaller, but of course your choice. Good looking kart nonetheless 👍🏼 Glad i subscribed
So I think it was a 10in rim in the back and 9 up front. Definitely too big. Lots of float which was great for drifting but I would recommend like 5-6” up front and 8-9” in the back now!
I think I might have spend about $2000-2500 on this build! It adds up quickly when you buy all new parts! Really just depends on the parts and what you need. I think spending about $1800-2000 is a great budget to start with!
All the people asking for the damned plans and measurements didn't watch the video. The tape on floor is your measurements!!! EACH BOX IS A ONE SQUARE FOOT PEOPLE!!!
I’d love to build a go kart but I don’t have no tools or money 😂 the money isn’t really the issue tho I’m sure someone is giving away junk scrap that I can cut up and use on Facebook or something but the tools are what I really need especially the welder and me being picky about how welds look I’d probably have to learn tig welding
Very clean build and welding 😍
Are you gonna post the frame design on your website and are you gonna list all the parts you use? I’d love to copy this build
i wish
@@lefantomeband I bought a engine and metal just for this guy to not post any actual detailed dimensions or anything
@@aeroekins5415 hey did you manage to build a frame
@@cthx4583 no I wanted to copy this guys build but he gave absolutely no resources for all the parts he used let alone a simple schematic for the frame… just another TH-camr trying to scam ppl into buying their crap
I’ve messaged him about it on insta I hope he reply’s if y’all have already build one please share your frame designs with me 😭😭,
those front tires are freaking wide.. holy crap.. lol ... build is looking good. thanks for sharing. i am def making one of these this winter.
Hell yeah! Perfect little ripper 😈
Oh yea! No drift sleeves needed just over pressured 10” tires hahahaha
Truly the Go Kart God! Wear a resporator next time. Not worth dying for. Awesome video!
This is very creative amazing 🤩
People don't realize this took 20 welding hours minimum.
Hey mate is there a way to get the plans for the frame really love the design 👌
Dude are you gonna post the dimensions of the kart so people can actually replicate your build??????
New subscriber you are incredible, I have a similar project together with my father and you have motivated me to continue thanks greetings from Celaya Mexico 🇲🇽👋🏽
Hey man tnx for this video ❤️ god bless you 🎉❤️
Appreciate the support!! Thank you man!!
Wow.........😎
What happen to the design sheet I thought you said it would be in the description 🤔
How much did the metal cost? What type of tubing would you use to build this cart of you had to use it.
Hey! So usually I buy from my remnants section at the local metal shop! They charge 1.49 a pound and I would probably us anywhere from 80-150 lbs of metal on a kart! I love to use the square 1x1 tubing! And it usually cost about $1.8-2.25 per foot. I would usually use like 36-50 feet for a project like this. Sheet metal can range but a 4x4 sheet of thin gauge metal might run you like $40-70! Let me know if you have any other questions!
I’m impressed. I want to do this also…
Therapeutic to watch this
Do you have the plans up on your site ?
Yo dude we’re still waiting for dimensions and are you gonna make a list of parts??????? You’d be gangsta as hell if you posted them
Please can you say to me the measurements of the body of the car quickly
Use a contact tip on the end of the welding gun, it will structurally make your welds safer since it would actually direct the shielding gas at your weld
if you don’t know what I mean or if you have a problem/reason for doing so lmk
Don’t some welders just not have gas tho?
@@drewwaddell9302 only if he was using flux core wire.
@@avischoenfeld8040 At 3:20 there is light brown “dust” on the metal where he made a tack, indicating flux of some sort
he's using flux core wire so he don't need tip
How did you get the hub, tire, and engine components (for example) in Autocad? Did you draw them yourself or are there models that you imported?
What was your king pin aka caster angle? Yours looked a bit forward.. I went with 18 degrees rearward
I did half inch till back
Looking for top speed
Where did you get the rear axle? Or did you make it yourself
Hello, what material did you use to make the frame?
any Kart Plans?
Where are the plans for this build? I'd be very happy to pay for them, but they aren't available on your site. Thanks!
Did you ever put the frame design online?
Hey man, what tire and wheel set did you buy?
I believe these are Van-k Rims and Unilli tires!
@gokartgod 8x6?
where did u by the rear axel ?
and wheels
About how much did the frame cost in material?
what engine did u use?
How long did it take you to build it? Nice craft btw
Thank you so much! Probably took me about 1.5-2 months of work! From ordering parts to riding probably around 2.5 months!
@@GoKartGod do you have a parts list?
how much cost the project
and what aluminium or steel used for the frame
Basic mild steel 1 inch squares tubing & is cheapest way
I love that popeye shirt
Can you tell me the tire sizes ?
U said there will be measurements to copy and built it
Yes we are still working on the design it should be available on are website in a few months.
@@GoKartGod I’m guessing very soon then!!
Wheres the end cone on your welder thats used to shield the gas
I wouldn't mind a few of your designs if that's ok. I wanna build 1 for me and the kids
Are you using inter shield ?
What metal did you use?
When will you have the blueprints available?
I neeeeeeed these wheels and tires, What are the sizes?
Hii what size and thickness of metal did you use to make your frame ?
Hello, can you write the sizes on a piece of paper and put them in the Instagram story? The video was great.
how much did the whole thing cost?
Engine
Live axle
Wheels & tires
Is 800 dollars.
Frame the cheapest if weld it yourself
@@briantruck2284 mine was similar
When we can see the frame design?
What kind of steal do you use?
take my order
Sir what is the chamber angle??.... please answer
Pasa las medidas del chasis bro
Is there a reason you chose the same tire width front and back? I’d go for something smaller, but of course your choice.
Good looking kart nonetheless 👍🏼
Glad i subscribed
So I think it was a 10in rim in the back and 9 up front. Definitely too big. Lots of float which was great for drifting but I would recommend like 5-6” up front and 8-9” in the back now!
How much did it cost to build total?
I think I might have spend about $2000-2500 on this build! It adds up quickly when you buy all new parts! Really just depends on the parts and what you need. I think spending about $1800-2000 is a great budget to start with!
Where can i get the dimension for the design
what angle on the front spindle
what metal is used for the chassis?
what seat did you use?
How did you get the correct angle for the front wheel mounts?
We used an electronic angle finder from Amazon! We will leave a link in the next video description.
where can i get the seat and seat adjuster
Do you have dimensions or blueprint
Which app did you use to design that vehicle.
All the people asking for the damned plans and measurements didn't watch the video. The tape on floor is your measurements!!! EACH BOX IS A ONE SQUARE FOOT PEOPLE!!!
Thank you for clarifying that for all the people! We did not clarify that enough!!
Post dimensions for the frame
What motor is that
It’s a predator 212 motor! If you are international you would look for the Honda gx200!
Can I put a 1wd on the go kart ????
Can you race it? Is it wka legal?
We did not make this kart for racing. But you can rip it on tracks just don’t know how legal it is.
I’d love to build a go kart but I don’t have no tools or money 😂 the money isn’t really the issue tho I’m sure someone is giving away junk scrap that I can cut up and use on Facebook or something but the tools are what I really need especially the welder and me being picky about how welds look I’d probably have to learn tig welding
you can set up a mig with a tig torch and tig inexpensively, but you can't weld aluminum with it, look it up on youtube
what size is the iron?
Please one question, im from Brazil how much HP has the engine ???
6.5
You can get this off of printerest for no money charge wow
Hello me new subscriber , what you use machine for gokart in video ? 🇲🇨
Hello i from Ukraine and I want to know a frame size to copy and build kart
Maybe you can give me size???
how tall of a person does this seat?
5 ,11 should be max I guess taller than that might look through his knees
Yes I was 5’11” but I put seat sliders on so you could fit anyone really!
@@sriniketh9142 😂😂😂😂😂
😅
hey! What design software did you use?
Haha ik you commented this 8months ago but I thought I'd jump in. Its AutoCad! Use this program for work all the time haha
what is the software you use for de modeling ?
Looks like autoCAD
can you link the musics pls
What are the dimensions of iron?
1 by 1 square tubing 1/8in wall.
Can u make me one and how much will it be
How much money did you spend on that build ???
Anyone know the music name?
Hello, I want to build a kart, can I have the map and dimensions of your kart?
What is ur website
Link in description or GoKartGod.com
Me from indonesia , please answerr wkkw
Los vendes?
We are not currently selling them at the moment but in the next year we are hopefully going to have frames available!!
@@GoKartGod 👍👍
Hoe Big is te frame
Pls don't grind structural welds. I had to learn it the hard way...
Not grinding the welds flat can cause stress risers, want to get them flat as much as possible.
what platform did you use to design a frame?