Have You Seen a Laser like this Before? The Two Trees TS2 10 watt Diode Laser
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2022
- Have You Seen a Laser like this Before? The Two Trees TS2 10 watt Diode Laser. Two trees sent me out their latest diode laser offering, the TS2! It's a 10 watt diode laser that has a couple of tricks up it's sleeve!
Two Trees TS2:
twotrees3d.com/diode-laser-en...
Check out the NEW WEBSITE: www.builddadbuild.com/
PREMIUM MERCH:
www.builddadbuild.com/store
DISCORD: / discord
PATREON: / builddadbuild
DISCLAIMER:
Working with Fire, lasers, Electricity and Power Tools is extremely dangerous. Please use caution if you are attempting anything in these videos.
Also, please drink responsibly.
_____________________________________________________
USED IN THIS VIDEO (affiliate links):
Two Trees TS2:
twotrees3d.com/diode-laser-en...
Link to all my tools:
www.builddadbuild.com/toolshome
_____________________________________________________
Don’t forget to Like, Comment & Subscribe:
/ builddadbuild
_____________________________________________________
ADD ME ON:
Subscribe: / builddadbuild
Patreon - / builddadbuild
Discord: / discord
Instagram: / builddadbuild
Facebook: builditburnit
Twitter: / builddadbuild
Pinterest: / builddadbuild
TikTok: / builddadbuild
_____________________________________________________
MUSIC:
#builddadbuild #twotrees3d #diodelaser #laserengraver - แนวปฏิบัติและการใช้ชีวิต
You had me at great green gobbs of greasy grimey gopher gutts🤣
I like it. Would love to have a 10W of anything really. I'm disabled and currently unable to work, so I'm on a fixed income and am unable too afford an upgrade. I'll stay hopeful though and maybe I'll be able to buy just a laser head upgrade instead of the cost of a new setup.
Interesting video thanks for sharing
Nice they figured out to put the z auto on it. Not something u need but nice to have
"Great green gobs of greasy grimy gopher guts..." LOL haven't heard those lyrics in decades! You weren't by any chance in scouts when you were but a wee one??
I've got one of these shipping to me now.
you recommended the aufero 2 to me but the sale wouldnt go through for some reason so i got the sculpfun S9 with the extension bars and im glad i did, i hope you do a review of it as the laser is a bit more powerful
I laughed way too hard at the intro. Even in my 40s, my mind is 10 years old.
I'm liking the size of 450mm x 450mm or just over 17.5 inches and being able to slide things in from the side. Could put something on the end of a longer piece with that available.
Wish it was available in 20w power though. Probably won't be long before they have it with the popularity of the D1.
Please tell me if it is possible to connect a computer or laptop via wi-fi to this engraver, or only through a smartphone? I tried to connect using the IP address (through which I log in from the smartphone application) from the computer, but nothing happened (the computer is connected via a LAN cable to a Wi-Fi router) or does the computer only connect via usb?
I think this one is WiFi compatible
еще ось зет удобна тем что на гравировку линией, лазер можно поднять во время работы, с расфокусом.
еще можно фломастер или ручку приделать и использовать как рисующий чпу.
The z-axis is also convenient in that for line engraving, the laser can be raised during operation, with out of focus. You can also attach a felt-tip pen or pen and use it as a drawing machine.
👍🏻👍🏻
I like the powered z Axis but thats about all. I'll stick with my D1 with the 10w and my 20w heads.
Nick, if you were going to buy a 20w machine would you go with a X-tool or Atomstack? I am ready to spend the money, just can't make my mind up. It appears Atomstack is the better deal with air assist included. What are your thoughts? Thanks
I don’t care for Atomstack as a company. They have screwed me around too many times. So I have to go with xTool
@@BuildDadBuild Thanks for your honesty. Looks like I am headed to buy an X-Tool
I’ll just stick with my 10 watt D1 and my 10 watt M1.
I would love to see a comparison between this laser and the xtool d1 pro
There is a new firmware update, that specifically is for Flame sensor sensitivity, you need to update it, you will find firmware update tutorials on youtube.
This video is a year and a half old. 🤣🤣
Huh... what's the price point on the preorder? I try to load the page, and all I get are errors about secure connection failing. And it looks like it actually has a slightly smaller footprint than the D1... am I right?
Pre order price $699 ot $798 with air assist.
The price I'm seeing is $798 with air assist, $699 without. Right now you can get a Sculpfun S10 with air assist for $540 and those seem to cut thicker material more reliably.
The footprint is about the same. All the companies give you a work area but the laser doesn’t actual cover the entire space.
Everytime I see a laser review, the reviewer always mentions that they wish it had this or that. Makes me glad to have Snapmakers because they have this and that already. Cost a little more at first but, as these other machines improve, the price goes up. Plus, the Snapmakers have CNC toolheads and 3D printer toolheads.
I don't understand these diode lasers at all. If you are going to use a laser I'd buy a co2 from the start.
@@ClintonCaraway-CNC I want to believe newbies like me are scared of how bulky CO2 lasers looks like... and the sort of complex installation... how fragile it is with its tube... On the other hand, i will choose xTool D1 Pro 20w over this... Still learning tho... Just been thinking it through... Going CO2 cos it costs less or going xTool cos of its versatility and less of a scary look... Maybe you can advice...
@@ClintonCaraway-CNC co2 lasers don't work on certain media so I'm told. I started with a gift and have been upgrading since. I use a 10w diode on a Snapmaker and it does what I need.
Curious of your recommendation between this and the Sculpfun S10.
I’ve never used the S10. So I would have to go with this one. 👍🏻
What's the white box between your lazer and CNC router?
It’s a filter.
Where did you get the firmware update? It is not on the Two Trees download site...Thanks!
twotrees3d.com/support/download/
@@BuildDadBuild Got it!! Thanks...Love your channel.
I think i am sticking with the xTool D1 Pro 20w...
I just want to know out of all the lasers you've used, which one is your go to and why?
xTool D1 Pro 20 watt. Hands down. For speed, power and ease of use.
@@BuildDadBuild just replied same to @CCcnc... Cos others like him recommend going for CO2 instead of xTool D1 Pro 20 watt... Pls what do u have to say about this???
Are you using laser grade/high grade plywood for your tests? They have less patches, voids and glue, so cut cleaner with less flare up as a result. I've had a cheap piece of plywood where with my 40 watt CO2 it would just burn and char up. Cut it up and there was a thick area of glue holding a large void patch in place. They are probably claiming the cut thickness based on baltic birch B/BB or better.
Yup....just using plain ol' plywood.
99% of people are just buying stuff from the local hardware store so I doubt many people will be buying "laser grade" wood. If that's the case then they need to state that in the specs, but you know they won't. I never knew they had that, going to look that up now.
@@MrMadeinthe80s Laser grade plywood is well known by those in the hobby. Granted, the availability of cheaper diode lasers has brought many new hobbyists without any experience, without knowing what should or shouldn't be cut. I would want to make sure my exhaust is flawless if cutting big box store plywood, the glue more often than not contains formaldehyde. Laser grade is formaldehyde free. People cutting that in their garage or basement with poor or no ventilation is a huge no-no. The first thing people need to do before putting a laser to anything, is to verify that the fumes are not toxic when burnt. Just because a laser will cut it does not mean one should do it.
You can buy laser grade at a lot of the places you get lasers, Amazon, Woodpeckers, etc. Unfortunately it is not cheap right now, being it is baltic birch from Russia. It's more than double the price I paid before the war. But hopefully alternatives made from eucalyptus and bamboo fill the gap.
Those 3D puzzle kits you see at stores are made from laser grade baltic birch, they can't have any bad spots in them or the models won't fit together properly. Especially the moving ones like clocks.
did you just call your kids " Crotch Omlets"? LOL :P
LOL. Crotch Goblins. But Crotch omelets may make an appearance as a descriptor for them now.
Have you use the iker k1 24 w and if so how do you compare
I have not. Never heard of it.
@@BuildDadBuild if you get a chance to look it up I'd like to get your thoughts on it 👍🏾
Rotary attachment?
Looks like they have one on their website:
twotrees3d.com/product/rotation-module-for-engraver/
I may just have to cut me an acrylic sheet for the front of my D1 like that.
How long did it take to receive your order? I just placed mine and I’m getting anxious
Like a week or two...
@@BuildDadBuild thanks love the content by the way, simple, elegant, insightful, And thorough!!!👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
I got it🎉🎉 me and my wife are so excited. I do have one concern that the support team was unable to help me resolve. In the bag that the air assist valve was, there also was a 2 prong cord that was about 3 inches long with a plastic plate on the opposite side and I cannot for the life of me figure out where it goes or what it’s used for. The white tag on it has a Z or an N depending on how you look at it and from what I can see all of my wiring on the machine is connected and complete. Any ideas on what I may be missing? Thank you for being so responsive
@@ECUxxAnointedxx email me a pic at nick@builddadbuild.com
So what you're basically saying is...That this diode laser is crap?
It seems like their 8mm macro is not set correctly if it moves away from the board more. It should try to focus 4 mm into the board, right?
I tried different focal lengths and couldn’t get a better result.
Seems ur finally thoughts and facial expressions are not to Impressed with the laser. Not like ur excitement with the Xtool D1 In earlier vids.
Is it that apparent? LOL
That flame sensor is too sensitive
\
You’ve gotta turn it off. That thing is worthless.
Do you know that you are reviewing a product from a company with devious practice. TS2 model is SOLD OUT but you can still go to their website and buy it without notification of the situation or notifying you that your shipping time will be significant affected, but your credit card will be immediately charge for it.
I’d suggest contacting their customer service. I don’t work for Two Trees.
I had. I purchased this printer 08/28 and I contact Customer Service to get status of the order. Very vague responds, they are repeating that " awaiting fulfillment " but like I said, you can go and purchase one without any notification that it is sold out. The US and EU are the largest buying market in the world, and it is time that we ask these companies to stop doing commerce this way.
If you want to do business here threat as with respect. What about if was the other way around and will be uncertainty on when our payments will to their account. Do you think that they will continue to do business. We are accepting their practices like normal. I'm not naive but we have to start somewhere. Their many companies to choose from and they have to earn our purchases.
At the time of my purchase, I would it like to have known that was a delay on shipping to make an educated decision.
Feet, hands , balls , eye, ears trump traditors lol
Why black nails?
i think his laser head in not very good... cheap made..i watched many videos about this burning and fire alarm... they need to improve the laser module or change it!
I thought the autofocus was too slow and an unnecessary expense for a diode laser that can be manually focused in 2 seconds. CO2 laser with cameras, then I'm all for it, but not an expense for budget machines.
black on fingernails...have you been engraving your fingernails?
That's how he knows when his fingers are too close to the saw. Black turns red. Kinda like mood ring but better.
Greasy Grimy Gopher Guts Song 😂Had to look it up, never heard it before but hey I'm only 69. 🧑🦽