Hardest RYFT Bash EVER!! VITAVON!!!
ฝัง
- เผยแพร่เมื่อ 16 มี.ค. 2021
- EPIC!!! This was the hardest I've ever driven the RYFT!! VITAVON FOR THE WIN!!!
Use the links below to support Exocaged RC!!! Thanks!!!
Axial Ryft
Amain bit.ly/2LPoVrS (Orange)
Amain bit.ly/2XAbJcS (Black)
Ebay ebay.us/njMNCl (Orange)
Ebay ebay.us/TIY5DV (Black)
Horizon bit.ly/2Ovk686 (Both Available)
Pm Arthur Tsang on fb messenger in this group to get on the list to get a set of these. groups/VITAV...
Email Arthur at arthur_tsang@vitavon.cn and order directly
Ryft Straight rod ends
Horizon bit.ly/30QhLrs
Ryft Angled rod ends
Horizon bit.ly/3s7Bm28
Ryft Stock trailing arms
Horizon bit.ly/38OAic2
DSM Offroad Mini Snatch Straps
www.dsmoffroad.com/products/m...
Castle Monster X ESC
Amain bit.ly/2Yids6B
Amazon amzn.to/3trZEEi
Ebay ebay.us/wAWtsO
The Swaybar:
I used the front part of a Hot Racing Swaybar kit for a Bomber, the chassis bushings I got from MOFO Rc, Links down below for those. I assembled and drilled them out gently with a 1/8" bit to fit the 1/8 piano wire for the torsion bar. I also drilled out the bar ends of the Hot Racing arms to fit the new bigger bar. Very carefully I cut a flat on each end of the bar so the arm set screws would hold in place. The links to the axle are approximately 68mm long eye to eye so use whatever you have to achieve that. At the bottom I used a spacer from a kit from Dixieland RC to make up the gap, I went back later and added one to the top to straighten up the links. Hope this helps!! I have put links to the swaybar kit down below and the Castle esc and holmes motor or equivalent, please use them to support Exocaged RC Thanks!!!
Hot Racing Swaybar, I can only find the set, its possible the rear part may go right in with longer links.
Amain bit.ly/30i9Cx0
Amazon amzn.to/3vhSVi6
Ebay ebay.us/QWqG32
.125 spring steel rod
Amazon amzn.to/2Q2N5RI
Ebay ebay.us/bruU1f
You can message MOFO on his FB page here for the bushings / mofoxrc
or if you have a printer you can print them yourself here:
www.thingiverse.com/thing:478...
Holmes Recommends this motor over what I used
holmeshobbies.com/motors/brus...
Holmes Hobbies 2100kv 540 XL Puller Pro ( Used in this video )
Holmes holmeshobbies.com/motors/brus...
Ebay ebay.us/tBMSj4
Flysky GT5 Radio
Amazon amzn.to/30M4a4c
Ebay ebay.us/Fpihsu
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc - บันเทิง
This was NOT a hard bash session, this was pure PUNISHMENT, no mercy borderline sadism.
...and Vitavon "to the rescue"!!!
Awsome
😂😂😂
Exocaged Style Ryft Beatdown ! Those axles are beautiful.
She took a good beating man that was some hard hits and the axles tuff as nails
Those axles are beautiful! Keep upgrading til it's bullet proof!
I came around to try some stuff from Vitavon, they are really well crafted pieces, tolerances are spot on.
Now THAT was a Proper Testing of those Axles. Was kind of surprised the rims survived a couple of those side landings.
Looks to be Vitavons normal high quality. Seems like you deal with Vitavon as much as I do if not more Joe. It’s great cause I know you’ll show us the quality of the new products that I personally want to see. Sometimes I have the part before you but you always run it before I do so it’s great to get to see how it plays.
BEAUTIFUL!!!
yeah man, the one vehicle I'm afraid to add up is my UDR.... LOL
That's what I call a beatdown. Exo Jo's put a whoopin on the ryft... lol love it. Keep em coming.
Every time I see the name Vitavon, I think it’s some sort of healthy food product...
It’s healthy RC products... and healthy anything isn’t cheap... 😀
Hey man where do you by your aquaslip grease from???
Hopefully not Herbalife 🤣🤣🤣
Lol yeah in a I love Lucy episode vitavon-vegimine cures all
Like how he chuckles, so happy, with the new axels😅👍🏼
Every time I hear Vitavon I think about those awesome Capra's you've built. I have all of them and enjoy them all. "MY Man" Exo.....👍
In my opinion, yours is the best set-up I've seen so far. Those housings will handle all the 4s power you can put trough'em now. The choice of running a Castle/Holmes system is the best change, control-wise, I've seen. You need an excuse to get a raw 500 or 777 now. That thing is awesome, bubba.
I’ve got a raw 500 in the Lasernut that’s coming out and going in this. I got the Reefs 400sc servo that will go in the lasernut to replace that. I can’t see this needing a 777 for what I plan to do with it.
Wow, just wow!!! Unbelievable bash!
Very nice parts.
The one handed camera work is Oscar material.
Thank you!!
Those are so clean 👌
Thanks for the content
Those are really beautiful as well as being robustly engineered. I wish I had installed a servo wire extension as you did when I changed out my Bombers servo. It would have saved me considerable time if I ever again need to change it. In just under two years I've gone from 'God, I hope I never need to take this thing apart' to 'Next time I dig into this thing I'm going to........'
Ohh yeah, I have the Reefs lockable extension somewhere but couldn't find it. That would be perfect for these situations.
Been waiting for this. Thanks bro. ❤️👊😌
that was awesome
Great video allways watch tell the end
Epic straight Epic 😎 🔥 10 out 10...
Dude that was insane! Cant wait for my set!
Nice bashing Joe!
It's also pretty wild how you can see how much everything flexes and bends on a hard hit!
yeah you never notice that until you slow it down
@@ExocagedRC I honestly don't know how the plastic stays together. I guess we dont give the manufacturers enough credit on a lot of this stuff because some of it is insanely tough!
I watched it all Homie! I can't wait to get my first Vitivon axles !!!
Beast mode engaged. No more worries about breaking axles with those bad boys 🤘🤘
you got that right!!
Awesome series of videos on the Ryft! I got one one the way 👍 Not my normal style of truck but this just looks too good 🤩
I would put them in a glass case and mount them on a shelf in the centre of the room 👑 it's like art 🎨
Joe once again pulls out another properly built beast!!! Well done great bash!! That front flip that broke the link end was definitely deserved!! I think I’m gonna pull the trigger on vitavon for my XMaxx and Maxx very soon👍👍👍
yeah man, I'm disappointed in my skills on that, I knew what to do but it reacted so fast I wasn't ready.
@@ExocagedRC seems like the rift is very quick in the air I’m sure it’s just a matter of getting use to the throttle control. Plus I’m sure you were 1 handled driving. 👊👊👍👍
Love your dedication to the Hobby! you have some of the best reviews and tests! would love to someday compete at exocage arena!
Very nice craftsmanship when.I buy my ryft im going to get em.
Great bash!!!! 🤘🤘🤘
Thanks for all the knowledge 😊 I will do the vitavon axles next after I break these axles but for now all I've had to do is add a copper shim in the front differential spool gear housing that came out of a brake caliper hose and brake caliper for a 1:1 scale vehicle 😂 to compress all the gears closer together
😊and I added high temp wheel bearing grease and after that I did nothing to the rear diff. So now I kinda have a front over drive but still have an open differential 😉
the stock housings are pretty good unless you really get crazy with it
@@ExocagedRC thank you
Aurthur ALWAYS has top quality parts. Nice video
Yes they do
Those look great! Crazy bash
Thanks! Awesome axles
Right on! I reached out to try to buy their LMT axles
wow that Ryft has taken a beating finally broke something lol. Great videos I have local people that have ryft they love em. Im still wanting to get a Ryft time will tell thou lol
Looks good brother I wish I was put of the hospital and working on mine .. but keep on with the new videos..
Nasty brother just plain nasty grip n rip beatdown!! Yup i need those axels! Be my first vitivon parts to try lets see if i like them! So far the eyeball test they look great!👍👊
It lands like a cat. A heavy cat.
Nice 👍👍👍
오~~재미있게 시청했습니다👍👍👍
Gotta get some of those axles! Servo saver in mine just bit the dust! Great video. Been watching your vids for a while and just subbed. Great content!
Awesome! Glad to have you!
Bring out the Maxx!!!
I have a Maxx video to get done
That would be tite
WOW!!! 👊😎💯🔥
it's a shame you didn't push the stock axles a bit more. The Vitavon axles are a lovely bit of kit but at the end of the day its 200 bucks you shouldn't have to spend on the truck. Hopefully Axial will beef up the stock axles.
$200.00... The Facebook page says $360.00 for the pair!! Outrageous.
I did push the stock ones towards the end. Jumped it pretty hard at the same place, but yeah I didn’t drive it like this.
@@shamblershamfam3597 Ouch, I couldn't see the cost so looked at the trx4 ones.
@@ExocagedRC good to know, I was really looking FWD to getting a Ryft or a Lasernut when they come in stock but to be honest the reviews have put me off. I don't want to be trapped with a broken car that I've got to spend 360 dollars on the axles or driveshafts just to make it work.
I really don’t feel vitavon prices are out of line for what your get.
I do feel it is crazy that the stock truck doesn’t hold up
Smh them there axles looking real nice...Real Nice!
Waiting to see those ottsix usd stickies on this beast 👍🏽
Yeah I hope to fit them. The SLW hubs aren’t compatable with the 8mm wheel nut and sockets to bolt on but I think I have a way to get them on.
It looks like you could swap those sway bars around so they flip to the inside rather than sticking out. Then you wouldn't have to worry with buying straight arms. I need to get his trx4 axles
they are most effective mounted at the axle
@@ExocagedRC I don't think I explained what I was trying to say very well. But you know how the top link that connects to the piano wire is straight for a few mm then it gets wider? It looks like you could take the one on the left and put it on the right and take the right and put it on the left. Then they might be tucked up in line with the shocks. It's just hard to tell without being able to look directly at it
Do the cutouts around the servo (on the Vitavon front axle) allow the servo to fit through the mount without disconnecting the servo wire?
So if you had to get a ryft or bomber for general trail use and some light bashing/ rock crawling what would you choose
At this point. I’d choose the Ryft
Quick question when you are swapping over all of the internals to these axles did you have to buy anything extra?
Awesome vid!I
I would be eternally grateful if you could help me with this question: Do you know of any bevel gears to use with the ryft until the axial ones are available again, or that are generally stronger than the stock ones?
My rear diff turned to silver soup after less than an hour, and i'd hate to wait until the end of june to run my ryft again 🙁
Just lucked up on a set and haven’t gotten the kit yet smdh! I’m sold for fun @54 😂
Where did u get the housing I've looked everywhere
Id like to see this as a crawler .
I almost don’t need to even drive my owns rigs anymore when watching this stuff.....lol... you’re slowly selling me on the Ryft.... still plugging away on a Capra build...parts, parts, parts....
Own rigs.... not owns...... oops..
I've got a Capra kit to,with every Vitavon and Treal parts I could find.
One day I'll start to assemble it. Lololol..
Do you the same shims & O rings in the Vitavon axles as you do in the stock plastic ones?
Yep
Awesome. Mine should be here in a couple weeks. Thanks for your informative & fun to watch videos
What motor esc combo are you running, and can it slow crawl, also you make the best ryft videos by far
Holmes Puller Pro 2100kv, it can crawl, but it not so good due to ratios. When they release the low gear for this, it will crawl fine, but not now.
Is rear spool worth having.
just ordered, ouch they were $$$ but worth it !
How much did it hurt? Wondering if I’m financially able to endure the pain
Could those axles be a direct replacement for some AR60's in a Wraith or SMT10 or the link mounts are very different?
so when you had to remove the rear bearings an tap them back in what did you mean by that ? im kinda not sure what you ment?
Where do you get your aquaslip grease from???
Amazon amzn.to/3lq2K94
What battery are you running or recommend for a ryft?
I use the 5000mah Turnigy 4S. In today’s video I put links to it on Amazon and eBay
Love your videos! What motor does Holmes recommend? The link in the description doesn’t work.
Oh. It was the new v2 puller 2700kv I think. I guess it’s time to rework the links in there.
@@ExocagedRC thanks man!
Ok now that you got the vitavon axles pretty plz put the stickies on
I tried, the wheels don’t allow the nuts to go in. SLW hubs and these large wheel nuts don’t get along well. I may see if I can get new wheels or something.
Where did you find the axles I can’t find anything on them
Links in description for them
You got locked axels in that
no, just 1/4 of a silicone ear plug in each diff
Wow It's a cool part Can you see the link to sell this 7075 part
Horizon must own stock in vitavon
I can assure you they do not.. LOL
@@ExocagedRC haha.. good parts though tempting to get the trx4 aluminum and brass axle set for 280
If you do decide to get those let me send you a link for ebay or message Arthur directly.
@@ExocagedRC that's where I saw it on ebay
How are your diffs holding up? Stripped my rear after maybe 1.5hour of driving on 3s
I made a diff video on that and found the ring gear bolts were not as tight as they should have been.
@@ExocagedRC cool, i will check that one out
Are those Vivavon axles available? i want some for my Yellow Rift!
He is sold out for a few weeks on these. Go on FB, join the Vitavon group and send Arthur Tsang a message to get on the list. facebook.com/groups/156116922377623/?ref=share
I want my bomber to run like this ryft…. Do you have suggestions for that?
Well, you will probably have to sell that and buy a Ryft
I also wanted to see you actually try and break the stock axles. People talk so bad about them but I want to actually see how much they can handle.
some were bad from the factory, bad mix and that's why they were so brittle.
@@ExocagedRC that's what I have heard. Some were evidently broken right out of the box.
@@ExocagedRC Indeed. Just got a newer set. It sez’ “RBX 10 Rev 1” on the package. Interesting.
Where can ya buy the housings ? What's the price tag ?
Info on that is in the description, they are now sold out for about 2 weeks.
Hey Joe, quick question: How does it look for maybe doing RWS?
Not yet. Vitavon may do a rear steer axle specifically for this. I’m hoping.
@@ExocagedRC so doesn't look like a simple install of the front axle on the rear then, I was kind of wondering. Won't hold me back from ordering the Ryft, just waiting to see first if there will be a kit release.
links to the axles? and arms? please?
Can we get a link for those axles?
I think once these housings are sorted they are going to get repurposed into monster trucks. Or those sweet vivaton housings.
Yep I 100% agree with that. New Bombers, Wraiths as well, the old 60 is about to be history.
Hi there, search for "MOFORC", he makes a rear sway bar kit made from 3d printed parts...
I have a link for them in the description
@@ExocagedRC nice, great guy to chat with and share ideas. I modified one of his 1/24 bouncer frames to fit my panda hobby micro. Thanks again for the awesome vids!
Where can I get a set of those axles at bro?
Where can I get these axles
Pm Arthur Tsang to get on the list. facebook.com/groups/VITAVON/?ref=share
One need only to grease the gears, not the housing.
Are those aluminum axle housings ?
yes sir they are, 7075 alloy cnc billet
@@ExocagedRC where did you find those and how much ?
Aaron Carey We honestly are evaluating, if it will be worth the time and money to do a second production run. Some want the axles in a different way, want it cheaper -- an as much as we want to accommodate the request, we do not have the time or Extra-Money to further subsidise Cost. PLUS we have other Project and Commitments to other Drivers and for our own Projects, need OUR Attention -- and honestly have not enough time and Resource for 2021. Anyways, Thanks for your Interest and Support!👍 .... 🤦♂️🤦♂️🤦♂️
Ok I need these in my life!! Really can’t drive the Ryft like it would be. Worried about breaking the front. How do I order a set from Vitavon?
He is sold out for a few weeks on these. Go on FB, join the Vitavon group and send Arthur Tsang a message to get on the list. facebook.com/groups/156116922377623/?ref=share
Are these available
All sold out right now.
I wish I could afford those axles.what is the price on the Viv transmission? I plan on moving my receiver to the fuel cell box and use servo extensions for both servo and esc .
Germany says awsome
Why can you only buy vivaton parts on eBay?
Can't order these to Canada 😭
Sorry
@@ExocagedRC did you have another link that I can get trailing arms and axle housing?
I can get the transmission case on eBay
It costs too much and too many design flaws. It's a Italian hitman, just look good.
I am new to RC I just bought me an axle rift just got in the same axles you have and I just put them on for being my first time it was hard but I got it all figured out it took me about a whole 24 hours but it I did it it is hard if you do not know what you are doing there is no good video step by step
I’m hope they break lol
LOL not a chance!!!
Ohh.. maaann.. They’re sooo nice...
.
.
.
Wait.. THEY COST WHAT.....?????? O_o ....Completely idiotic.
😂😂💰💰
thought you were gonna show how to install the vitavon axles step by step in this video. guess not useless video