Can we please... and I say this on behalf of the entire world, please edit the video to where the grinder doesn’t feel like I’m listening to it with a stethoscope? It’s absurdly loud, especially with headphones or with Bluetooth on a drive. On my way to a job in SC and it woke everyone in the truck up.
Could you guys please do a video for a open root groove test with a 30° bevel and 1/8 inch gap using 7018 1/8 throughout for 2g, 3g, and 4g using stringers only and a 3 bead cap? I really need to learn this
my filler always gets stuck and then i pull on it and it comes unstuck but ends up flopping around and it takes forever for me to get it close to the puddle again. so fuck it, i will work structural
JDaniel Cornu personally 1/8 2% lanthenated tungsten is great for most types of steels from 1/16” to 1” because it has great yield and does not ball up on you as often
I know this is an older video, I’m not too sure if y’all would see this. But I took this type is test today a 3G open tig root and 7018 filler and cap. The inspector told me that my root was unsatisfactory due to being flush on the backside and not being able to see a weave pattern. Is it even possible to have a weave pattern on a open tig root?
Good video , I would like to see a video that show how to do different weave walking the cup and showing the hand movement just to know and be able to make beautiful caps
👇WeldTube Store👇
www.weldlife.com
Wish I had some better instructors at my school
Great video!
Everytime I put the cooling rod above it it drips onto my torch and messes up my weld … help ?
This doesn’t seem to draw the base metal as much as stick !
Can we please... and I say this on behalf of the entire world, please edit the video to where the grinder doesn’t feel like I’m listening to it with a stethoscope?
It’s absurdly loud, especially with headphones or with Bluetooth on a drive. On my way to a job in SC and it woke everyone in the truck up.
Just started this yesterday. Looks like I’m gonna need more tungsten lol.
You can never get enough tungsten! Lol.
I remember the time i started 🤣 a pack of 10 tungstens lasted me a day 🤣🤣🤣
용접봉 끝은 꺽어주세요
위험합니다 😅
yall need more arc shots.....please....from start to finish. I dont mind 30 min videos. As long as we SEE how its done..
Fr. Most the time I don’t even watch the video all the way if it has no arc shots or just a few
I like those heavy hitters. Fill quicker, cap slicker !!!
Could you guys please do a video for a open root groove test with a 30° bevel and 1/8 inch gap using 7018 1/8 throughout for 2g, 3g, and 4g using stringers only and a 3 bead cap? I really need to learn this
We’ll did you figure it out lol
Let’s go! I started 3g today. Much needed vid 🤙🏼
THIS IS HOW YOU TIG WELD! No high frequency start no foot pedal no gas solenoid in the machine used - just torch valve and A LOT OF SKILL!!!
hell yeah in mexico we still using helium somethimes lol
what lens do you film with does it work in welding hoods?
Perfect timing. I just started working on this last night and had no clue what I was doing wrong. Thanks!
So are you having to push the cup up just a little or is the wiggles moving the cup up the joint?
Went and got AWS Certified in 3G open root GTAW after watching this video and Jody on WeldingTipsandTricks 🤙✌️
Can't see your puddle, terrible video from the start
my filler always gets stuck and then i pull on it and it comes unstuck but ends up flopping around and it takes forever for me to get it close to the puddle again. so fuck it, i will work structural
how that work out😂
@@swifty5530 fine I didn’t want to make any money anyway
Those modified pipeliners with the flip window kit are heavy af 🥵
Definitely a nice hood but yes they are heavy . You are better off getting a tiger hood in my opinion
WhT is the aws code?
americas welding standards
Do a video on TIG overhead cert plate
i see why it’s called 3g because your check is gonna be 3gs
Is that supposed to be a lot?
Could someone kindly tell me where I can buy this torch in US? Thanks in advance!
Can y'all make a video of 4g open root tig with dip keyhole method?
Do any of y’all know why I would get cracking on a Vertical TIG root?
just about to start learning Tig, what's the best tungsten rod diameter, cup number, filler diameter? Just to start learning, Greetings from Mexico 🇲🇽
JDaniel Cornu personally 1/8 2% lanthenated tungsten is great for most types of steels from 1/16” to 1” because it has great yield and does not ball up on you as often
8,10,12 cup
🔥🔥
What size filler wire did you use for the root?
Nice video buddy , what was your gas pressure on
I know this is an older video, I’m not too sure if y’all would see this. But I took this type is test today a 3G open tig root and 7018 filler and cap. The inspector told me that my root was unsatisfactory due to being flush on the backside and not being able to see a weave pattern. Is it even possible to have a weave pattern on a open tig root?
Yes it is especially after u wire wheel it
What’s the music at the beginning?
Yo Mike's hood tho, where do you get that?
This should take a while to weld up!
Be awesome to see some good arc shots pleaseeeee 💯💪🇺🇸👍
Where's the fabtech videos?
Interesting!
3g MIG with backing?
Good video , I would like to see a video that show how to do different weave walking the cup and showing the hand movement just to know and be able to make beautiful caps
Think about walking the cup like walking a 50 gal drum across the flooor
Very well
4g open root next!
super good !!!
excelente video. saludos desde Guatemala.
Love your welding im too welder but im learning
God bless you all. It would be great to accept Jesus now. He died and rose so that we may live. Time is coming. He loves us. Why not live for Him?
jesus was a tig welder?
Whats this guys last name? @weldtube
Reminds me of this one piojo I used to work with that was from del rio..
Finally someone doing it correctly.. UPHILL. Do employers let us test going downhill? Almost videos posted 3g are down🙃