Minimalist Home Office Build | DIY IKEA Desk Setup
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- I didn't like the look of most desks online. And for the price, I figured I could make one that fits my desired look, size, and storage needs! I went to IKEA and picked up a few drawers and a wooden kitchen countertop. I work from home and I was sick of working and sleeping in the same room, so I decided to transform my den into a home office. Let me know what you think!
Countertop: www.ikea.com/u...
Drawers: www.ikea.com/u...
Would you have a link to the countertop?
No prob! www.ikea.com/us/en/p/karlby-countertop-birch-veneer-90335206/
Drawers it sits upon: www.ikea.com/us/en/p/alex-drawer-unit-gray-turquoise-30483799/
My man! 💪 got the drawers, thank you!
Question, do they give instructions on how to attach the drawers to the countertop?
@@s2klivin39 No - they are all separate pieces that I used to create a "desk." All you have to do is rest the countertop on the drawers, or you can use rubber seperaters to really secure it in place. Really simple yet aesthetic build!
I did this during the pandemic because I had no desk at home. I put locking wheels on the cabinets for ease of movement.
Smart move 🤌🤙
What I like is just how easy it is to move (3 pieces). I think that I'd put a locating pin in the top of those drawer pieces and then a tiny bit larger hole in the bottom of the table top. Then it's locked in position. Even 2 in each would be better. Impossible to slide the top off even if you pushed hard. Also, nice to see it in this colour, I was eyeing this one and it's a solid top for a monitor arm!
Nice Colour With The Drawers!!
Thanks! Much appreciated!
I'm doing the same thing but I bought my butcher block from home depot because it's 100 percent wood
Nice! Do you have a link?
bought one drawer base, three legs and a 74" top for my desk. i will use two legs on the one end and one leg for a center support on the back. ikea has it going on in the simple / elegant department. it's like sauder furniture on steroids!
Nice!!
Love it.....and the colour 💕
Thank you, Cindy! Cheers!
Nice placement!
@@therecycledpirate Thank you!
I hope it’s Henny in that cup because I know you ain’t that exhausted from that 😂 nice set up tho
Hahahahaha
rs😭 he done kept both them clips in too
Awesome build.
Also your bike, she's such a beauty 😍
Bro, wtf. That thinglooks "not *that* good" at best. Also it looks very uncomfortable.
Terrific job, beautiful desk. If you add a little graphite to the door rail slots, it'll move so much easier. Thanks for the great ideas, especially the pasta😁. More please.
Thank you for the kind words and positivity! Truly.
I really love the color of the drawers!
This is the turquoise gray color option. I got the same drawers.
same setup but with risers and m3 tape so the top doesn't slip
Does it leave residue on the surface?
Perfect
I love the colors. Nice job bro
Thank you! Cheers!
👏👏that was huge!! Well done!
Nice I'm adding riser legs to mine 😊
I loved your solution. I am planing to take your idea and add a drawer for my MIDI controller. Neat idea indeed.
Lmk how it turns out!
@@MakersMax sure thing!
I love this ❤
Impressive build! The desk was well assembled too.
Thank you brotha!
@@MakersMax You’re welcome Bro!
This looks really pretty and nice. I think I might just create my own desk now!
You should!
@@MakersMax thank you for sharing 🙏🏾😊
@@racheloshaksmusic did you do it?
@@yousihard8569 No I decided to buy an electric desk instead because I realised that if I made it myself I wouldn’t be able to adjust the height for more space
I have the exact same Alex drawers, went with a different counter top! Great setup!
Thanks brother! Yours looks solid as well!
What countertop did you used?
Hi, i love the setup. But u should put a support leg in the middle of the table top. It will bend eventually if it hasn't yet.
Thanks! It’s been over a year and no bend or warping whatsoever
Great color.
Kein Minimalist!
@@chalermako thank you!!
Beautiful house❤
Thank you! :)
@@MakersMax what kind of bike is that?
@@JohnAnderson-ev3lp Super73 S2
I would love to get myself a set of those drawers with the exact same table top, almost identical to the setup I was thinking about. But I already built my girlfriend a vanity using 2 of those drawers on top of an entire shelf, so I'm really burnt out on building ikea stuff for a long time. I wish they sold something similar in shape/stability without having to pay $180 for a bunch of drawers I'll never use.
simple and efficient
The desks always look great but the quality of the drawers leaves a lot to be desired. I say this as someone who just bought an ikea desk because even higher end desks were still made from quite cheap materials and so ikea won on the value side of things.
Do you like the depth or do you wish you had more depth on the table top for your desk?
I’ve noticed the ikea countertops are pretty narrow
I have plenty of space to the right and left of my monitor, so I have no complaints about depth. Plus I like being close to the screen to mitigate squinting
Looks great! Is the desk top solid timber from ikea?
You forgot the gripper pads on the top of the two drawer units. The worktop WILL move unless you use these, or the screws provided. (I've got three of these units in this house, more in my kids' houses.)
Didn’t forget, just opted out. I have a lot of weight on the desktop and she doesn’t budge.
Where do you get the gripper pads?
@@jacksonlarkin4827 They came with the item.
Nice set-up 👍🏼
Thank you!
E-bike battery explosions on a rise. Keep them downstairs
How can you fix the table top to the drawers
I love this!! I clicked over to the Ikea item page that you've so kindly shared with us. May I ask if the correct size is the "98 x 1 1/2"? Essentially the longest possible one right?
nice color choices bro, it looks sharpe
I appreciate that my dude!
He worked up a sweat building a cheap desk haha
😂😂 I knew I'd find this comment
Each of those drawers is like 200 dollars and the top is 200. So total of 600. I don't think that is cheap
Sorry I could not open the link
The countertop is Karlby
But which color is it birch/veneer or oak/veneer?
Beautiful combination
Hi! Thank you! KARLBY
Countertop, birch/veneer, 74x1 1/2 "
Liked the loook of that monitor , can you name the model ? Which one it is?
LG 4K UHD 27UD88-W 27" LED-Lit Monitor with USB Type-C
Bro acting like he building a house 😂relax buddy don’t break a nail
Hahahah this made me laugh
I love this! 💙
Thank you! :)
Nice setup! Did you have any experience of this countertop sagging after some time?
I've seen it on other videos I'm using riser legs will strengthen the middle which is a bonus.
A year later and no sagging to speak of! 👍
Thoughts on the draws not being the same width/depth as the desk? Will it still be stable?
Roses are red
Violets are blue
Who came to the comments
To see for a reaction about the fatbike too😂
Hey have you experienced any bending in the middle after sometime of usage? Please let me know I’m trying to see if I should put a support in the middle or not
Surprisingly not! She's held up really well
@@MakersMax thanks for your reply. I noticed you didint put the table all the way to the edge of the drawers. That’s the rout I’m going but worried about bending.
Beautiful sir 😍😍
Is table top not fixed ? What if it’s accidentally pushed. Or is it the weight that makes it stable ?
the weight anchors it for me
This is an incredible accomplishment. Well done.
Love it❤
Thank you!!
Oh my gosh such terribly hard work sweat in from that , how you like to try tearing a. Shingle roof , off . Carry 90 lb bundles up ,latter or even laying Sod down . Wh chumpetts these kids are
Are those drawers always that hard to close? Is that an IKEA thing on all their drawers or do they also have soft, closing drawer mechanisms as well?
There are several ways to help the drawers slide. I've used a product called 3-In-One oil to lubricate the rails. Graphite from pencil lead works well, too.
They are super easy to close. I was inserting the drawers for the very first time in the video, which required a bit of effort to get them properly seated. They slide like butter now though
woth that view this is beautifull
How did you attach the table with drawers?
he doesnt
How would you even go about doing that?because mines have little holes in the bottom of the table but idk if they attach to the drawers themselves
@@Matt_722 There are wholes as I can remeber in the middle of each side of table, underneath. Drawers have same holes on same places.
But, I only used little velcro straps, as you place a table down on drawers they would stick together.
I'm fine with that solution 😉
@Matt_722 build it upside down 😉
How do you stick the table down and stop it from moving? I dont want to screw it in im thinking about using sticky dots
the butcherblock is like 60 lbs with its own weight it doesn't move lol
U installed wrong way round the counterpart holes are on the other side
Wrong way or not, still does what I need it to
looks great!! 😊what brand is your bike?
Thank you! It's a Super73 e-bike!
Isn’t the Karl by worktop 65cm in width and the Alex drawers are 70 cm in width, how did you make it fit ?
Those drawers are soooo expensive though!!!!
Your BoP(bird of paradise) plant is in desperate need of water 😢
RIP BoP
it's very narrow
Idk what you plan on using your desk for, but I just need space for a keyboard and a monitor😁
@@MakersMax yes, but you will be very close to the monitor. No bueno for the eyes. I was using 60 cm, now I switched to the 80cm and it’s day and night difference
@@jackdanyal4329 To each their own🤙. Enjoy my friend!
I wish you can give me your old laptop so that i can get that blessing too❤😢
Bro barely worked at 3 seconds and he actin fatigue af son 😂
😂😂 adult Legos is tough work
Is it treated wood. Will u sand or oil it?
Nice 🚲 ❤❤❤
What you having for lunch? Some bugs?
2 Alex 1 karlby right ?
Bingo
Hello, Congratulations Cool 👍👏👏👏
Thank you 👍
Does the tabletop slid around or is it sturdy if so can it move at all if you bump it
It's sturdy enough, but you could put rubber separators between the wood and the drawers, or even some 3M double sided sticky tape if you wanted.
He didn’t tell me to don’t forget to like and subscribe and I fucking forgot to like and subscribe bruh ! 😭😭😭
Would t they slip over?
Nope
How much weight can the countertop and drawers hold mate cheers…
Hahaha, I haven't tested its limits but I'm 180lbs and can stand on it with no problem. What kind of stuff are you putting on your desk?🤣
@@MakersMax hahahah it’s just that I’ll have like 3 monitors 2 laptops and a few other bits etc just wondering as I saw another video elsewhere and overtime it became bent leaving a dip in the countertop due to all the weight... 😂🤦♂️😂🤷🏻♂️
@@anisuddin4395 The weight of that amount of tech might make the desktop bow. I'd add additional leg/supports beneath the countertop and/or a support beam running horitotally beneath it if you're placing the desk against a wall. Letting the wall brace hold up the desk in the back will help.
Showing the struggle
How is the top attached to the drawers? 🧐
No, just resting on the drawers
How many ft is the desk you got in this video
I think it's just about 7 feet
Why to me dose seems small when i mesure the hight on it and i am from europe i talk in meters and centimeters
IKEA from Japan
How do you keep your hair so fixed?
Elmers glue
Which is the size of the table + name of the board. Is it from Ikea?
Hey man - I put the product links in the description. All items were from Ikea.
Where is the description? It's a short video which has no description
@@SantoshKumar-oy4km if your on your phone, hit the three dots in the upper right corner and then hit the “Description” button
@@MakersMaxyou are a hero
U just put deski on the containers or
Yep! The desk rests on the drawers
did you install some of the drawers without the rails?
No, all had rails brotha 👍
Has it bent or bowed?
Not one bit
But did u screw the counter top down?
Nope,. Just rested it on top
did you screw the top onto the drawers ? Or did you just set it on top?
I just set it on top
So does no one drill the table down into the drawers?
You could, I didn't
Does the top slip? Or is it sturdy?
Your yeti is more expensive than your drill… lol
Hahaha both work like a charm
How did you stick the countertop to the Alex drawers?
I just rested it on top. You could get some rubber separators to mitigate sliding/shifting but that hasn't been an issue in my experience. She's heavy enough to stay put on her own.
Won’t that be fixed? What if it falls?
It's heavy enough... It hasn't budged. But you could put little rubber separators between the table and drawers to really lock it in
@@MakersMax Got it. Thanks :)
The bottom of the alex drawer unit can be placed on the top and vice versa, the bottom of the unit is make to have holes to screw into the tabletop if it is used in a desk setup
En mi p pais Argentina te sale mas barato comprarlo en una tienda unos 8000 mil y te ahorras trabajo🇦🇷
Get a standing desk..
Nah
What chair is that?
Does the top slide at all? when bumped or pushed?
If you bump it with your hip, no. If you drop down and shoulder it like a linebacker, yes.
What’s the length of this table ? cm
187.96 cm
so many shots of you drinking water. why?
What counter top and what size or if you have the link can i get that
I just put the link in the description!
Did this at 1am last night 😂 not joking
How'd she turn out!?
@@MakersMax really good
Guys a geek
minimalist lol
The desk is a bit to narrow in my opinion, you sit too close to the screen
Personal preference I guess... Works perfectly fine for me!
@@MakersMaxnice view by the way
Please don’t play clips of you grunting and heaving loudly