Upgraded from an older 18v kit. th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
The inside of this drill looks like someone used it for a boat anchor. It's quite impressive to see something this bad be brought back into useful service. One less in the landfill is also a big win in my book as well.
Thanks! I'd previously have considered this a waste of time. You've inspired me to do something similar in order to upgrade a cheap set of these things in a batch while learning how to do some things I need for a project, win, win, win!
You're just a magician, it's unbelievable what job you're doing. A small point I want to emphasize is that you apply too much grease,If the engine runs hard for more than a few minutes the grease will start to heat up and may become slightly liquid,My advice to you is to apply less grease.Thanks for the fun and instructive video.
шуруповерт с виду стремный но внутри весьма достойный ударный механизм и внушительных размеров двигатель,интересно раньше делали,макита приятно удивляет
Excellent work and recovery as always !!! Standing ovation !!! Only here subtitles would not interfere with the video so that it could be translated, I don’t know Russian and English, but I’m very interested in your videos, I just have to guess a lot !!
You need to do some sanding and polishing on the plastic housings of the things you take apart to make them look more like brand new because they will be shinier and have fewer imperfections and scratches as well as doing the same thing to the carry case
Great to see the Sand Blaster. I think if available, you should get some spare motor shells, some of them looks really degraded by rust. As always great Video.
I understand why you used mostly all the original parts But the battery & the motor should be the first thing you should be replacing. Trust me it would be worth it
As power tools lover and repairer, I enjoy all ykur videos. I have two question... You cleaned plastic housing so good with only baking soda? And why motor became black after sanding? Thank you
The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly but gets faster each minute after you hear this signal bodeboop. A sing lap should be completed every time you hear this sound. ding Remember to run in a straight line and run as long as possible. The second time you fail to complete a lap before the sound, your test is over. The test will begin on the word start. On your mark. Get ready!… Start.
great job, could you start listing the tools you use and where a person could get? i'm a tool nut and i have noticed you have some interesting tools. thanks
Muy buen video me encantan. Donde conseguiste un extractor de baleros tan pequeño. (Very good video I love them. Where did you get such a small bearing puller.)
How does the motor handle the nominal voltage of the lion cells vs the nicad packs. I smiled when you wrote 12v 3ah but with continued use is it likely to affect the motor/electronic components?
A 9.6V pack running on 12V will heat up more under load and might let the smoke out if you don't give it time to cool. Under lighter loads it doesn't really matter.
Love this vid! That’s a pretty cool makita. I have some questions where did you find new labels or did you make those? Also does the new lithium charger charge batteries slower than than the regular charger?
I am very curious, how you manage to pull out over 13V from 3 li-ion cells connected in series assuming that VTC5A is not a high-voltage cell and you use an standard BMS board designed for 12.6V max.
too much grease O.o OMG but nice repair of that poor old thing i think it was rather expensive in that time.... and it's still pretty useful! look like it's light and rather powerful! well for the battery i would have do the same setup as original so with 18350 instead of 18650 but with lithium or whatever modern battery as you did for have the same voltage and way more capacity than originally. also, for your charger not a bad idea but now you have a nicad and a lithium battery charger that are exactly the same don't mix them..... or it's gonna make nasty things.
@@Akc64 не многие шарят настолько. У меня в компонентах и схемах тоже всё туго, хоть и учился на звукотехника. Зато в механике - шарю. Да и в монтаже электросетей тоже соображаю. Просто кто-то крутится в этом (ремонт плат разного рода), а кто-то просто восстанавливает для функционирования инструмента и красоты, не изучая настолько подробно данную сферу ремонта.
Клеевой шов надо было смочить бензином и подождать 10 минут и не пришлось бы ломать корпус аккумуляторной батареи. Двигатель расчитанный на 9,6 вольт подключил к аккумуляторной батарее 12,6 вольт, превышение на 30%, вывод долго не протянет.
Upgraded from an older 18v kit. th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
your video helped me get a makita 9120 battery apart
I'm so glad it help you.
Because of these videos that Gear Show produces helped me know how to keep my power tools going for even longer. Thanks
I'm so glad to hear that.
I've never been a fan of electronic tool restoration videos, but watching yours has changed my mind. Awesome video, great job!
Wow, thanks! I'm so glad to hear that!
@@gear_show ظظمنتاغ
Some of these tools I have never seen the old days of cordless tools
I couldn’t agree more with this comment.
I am from India
I love your video
Thank you!
Looking at the restoration work helps me a lot and inspires me to work on my tools. Thank you. I envy your skill and your tools
perfect restoration
Thank you!
More than a restoration. ¡Superb!
Thank you!
The inside of this drill looks like someone used it for a boat anchor. It's quite impressive to see something this bad be brought back into useful service.
One less in the landfill is also a big win in my book as well.
You're a genius
Thank you!
Thanks! I'd previously have considered this a waste of time. You've inspired me to do something similar in order to upgrade a cheap set of these things in a batch while learning how to do some things I need for a project, win, win, win!
You're just a magician, it's unbelievable what job you're doing. A small point I want to emphasize is that you apply too much grease,If the engine runs hard for more than a few minutes the grease will start to heat up and may become slightly liquid,My advice to you is to apply less grease.Thanks for the fun and instructive video.
Great point! I appreciate with your feedback. Thank you so much!
again... another fantastic restoration... you should have quite a collection by now. ;)
Thank you! Maybe one day!
You are the best. Man...
Fantastic video
Thanks for the visit
Good job, good luck👍👍
Thanks, you too!
шуруповерт с виду стремный но внутри весьма достойный ударный механизм и внушительных размеров двигатель,интересно раньше делали,макита приятно удивляет
Да, спасибо, что поделились!
Super cool idea brother
I'm glad you like it, thank you brother!
Great full contents
man watching you modify the charger is reminding me of Avatar Aang and his mad buddy Bummi!
plageran lol just watched that, good show, but I’m not sure I see the connection hahahah
@@nepicness I was expecting replacing a few transistors, resistors or the coil or something XD
Vary good job, love from Israel 🇮🇱
Thank you! I'm so glad with your love!
Muy interesante el video y quedo muy bien la restauración, Saludos desde Venezuela
Thank you so much! I'm so glad you like this video.
Another Excellent Resto. Thanks.
Thank you too!
Ok..👍👍👍👍👍 Japan..🇯🇵
👋👋👋🙏
Great job
Thank you!
Awesome video as usual
Never seen anyone snip off components like that lol
Me to
Glad you enjoyed
Very good restoration Mashallah
Thank you!
it's a very nice
Thank you!
Good job as usual.Would appreciate if you make a shop tour video.
Maybe one day!
Yes finally something we've NEVER seen on YT before! Whahahahahaaaaaa!
Thank you! I'm glad you like it.
More mate more!
Very beautiful job well done 👍
Thank you so much 😊
That the first Impact driver Makita made
Wow, thank you so much for sharing!
@@gear_show Welcome
But does it even impact? Na
@@joeld79 yes it does
Got to say I really found interesting the modification you did with the charging module, great thinking!
Nice job 👍👍👍
Awesome restoration 👍👍👍👌🏽🇷🇺✌🏻
Em rất đam mê những món này
Thank you!
Nicely done ✅
Good job!
Thank you! Cheers!
Great job I need impact like this one
It is light weight and powerful.
Congratulations ! Awesome rebuild.
dd
bvhk
Ну брат ты даёшь.
bonjour mr merci pour la video le travail que vous faite est tres genial felicitation bon courage
Nice job!
Thanks for the visit
Excellent work and recovery as always !!! Standing ovation !!! Only here subtitles would not interfere with the video so that it could be translated, I don’t know Russian and English, but I’m very interested in your videos, I just have to guess a lot !!
Thank you for the suggestion!
Good job 👍
Thanks 👍
Outstanding
Thank you!
Bravo👌
Thank you!
8:05 the best moment of this restoration)))))
You need to do some sanding and polishing on the plastic housings of the things you take apart to make them look more like brand new because they will be shinier and have fewer imperfections and scratches as well as doing the same thing to the carry case
He used to do that before.
Thank for video
You're welcome, I'm glad you like this video.
Excelente trabalho.
Thank you!
Sent that one clip flying to the moon :D
Haha I'm worry that time, I'm afraid it fly away from me.
Great to see the Sand Blaster. I think if available, you should get some spare motor shells, some of them looks really degraded by rust. As always great Video.
Thank you for the suggestion!
Parabéns, do Brasil!
お疲れ様です👍
どういたしまして！ この動画が気に入って良かったです。
I understand why you used mostly all the original parts
But the battery & the motor should be the first thing you should be replacing.
Trust me it would be worth it
I swear to god these objects are left outside the whole year on purpose for these sort of videos
Gear Show quá giỏi luôn. Nhà ở gần cầu tham lương phải không? Có nhận đệ tử không cho tôi được thụ giáo.
Good
Thanks
جميل ⚘⚘🇮🇶
I need those ancient stuff hahahahahaa... greattt
Thank you!
excelente!
Thank you!
You did all that yet drew over the 12V on the battery, 😭
Fun fact. He used an impact driver to disassemble a impact driver
💩💩
Hello. Please show in the video where these tools come from and what you will do with them after reconstruction.
Do you restore the briefcases too? It's weird to see a gorgeous restored piece going to a dirty briefcase
Yes, I did. I just want the video short.
From where have you got this old drills everytime? And why are most makitas? Nice work keep going😁👍👍
I believe he lives in Japan, so that may be why so many of the tools he works on are Makita or Hitachi.
He is from Japang dude🤣🇯🇵
Im frm 🇲🇾
Thats possible makita is japanish thats korrekt im🇨🇭
Makita is qualiti and you can order the Parts to repare it.
Yes,most probably he lives in Japan, so check all the labels Makita drills,all of them in Japanese character
"I used the impact driver to fix the impact driver"
🤪😅
As power tools lover and repairer, I enjoy all ykur videos. I have two question... You cleaned plastic housing so good with only baking soda? And why motor became black after sanding? Thank you
Can you make a video of restoring that black and decker drill
The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly but gets faster each minute after you hear this signal bodeboop. A sing lap should be completed every time you hear this sound. ding Remember to run in a straight line and run as long as possible. The second time you fail to complete a lap before the sound, your test is over. The test will begin on the word start. On your mark. Get ready!… Start.
great job, could you start listing the tools you use and where a person could get? i'm a tool nut and i have noticed you have some interesting tools. thanks
Thanks for the idea! I love power tools
@@gear_show well, if you list them, you better send them all over the world 🌍😉.
Hi from Romania 🇷🇴.
Helal olsun
#1
Congratulations :D
Your upgraded tools are amazing, and your clips are very helpful. I’d like to start with an old festo cdd 9.6 es. Do you recommend 12v?
I'm so glad that you like this video, thank you!
A 9.6v brushed motor can work with 12v without lose so much longevity
Muy buen video me encantan. Donde conseguiste un extractor de baleros tan pequeño. (Very good video I love them. Where did you get such a small bearing puller.)
Show !!!!
How does the motor handle the nominal voltage of the lion cells vs the nicad packs. I smiled when you wrote 12v 3ah but with continued use is it likely to affect the motor/electronic components?
I think the motor is going to wear out faster.
A 9.6V pack running on 12V will heat up more under load and might let the smoke out if you don't give it time to cool. Under lighter loads it doesn't really matter.
Be patient Brazil
You change voltage but didnt change battery type on case from Ni-Cd to Li-Ion.
yeah don't mix the chargers or you are going to have a bad surprise....
wow
Thank you!
Love this vid! That’s a pretty cool makita. I have some questions where did you find new labels or did you make those? Also does the new lithium charger charge batteries slower than than the regular charger?
Thank you! Yes, I made those label by myself. The new charger is good to charge the battery.
I am very curious, how you manage to pull out over 13V from 3 li-ion cells connected in series assuming that VTC5A is not a high-voltage cell and you use an standard BMS board designed for 12.6V max.
too much grease O.o OMG but nice repair of that poor old thing i think it was rather expensive in that time.... and it's still pretty useful! look like it's light and rather powerful! well for the battery i would have do the same setup as original so with 18350 instead of 18650 but with lithium or whatever modern battery as you did for have the same voltage and way more capacity than originally. also, for your charger not a bad idea but now you have a nicad and a lithium battery charger that are exactly the same don't mix them..... or it's gonna make nasty things.
Thank you for the feedback! I will it some note on them.
I will like to know I could get in touch with the person that carrying out the restoration work
You shouldnt have modify the charger, as long as there is bms it is okay, it cuts off voltage when it reaches 12.6V.
Okay, I use to try this way with my previous project but most people don't recommend this way. th-cam.com/video/ukKuCGG38n8/w-d-xo.html
9:32 Очень странный метод. Крайне необычный и замысловатый. (Very strange method. Unusual and intricate.)
I try with buck converter, it take time.
Ну чувак не смыслит просто, что можно найти обвязку tl431 и путем изменения одного из резисторов сделать нужный вольтаж
@@Akc64 не многие шарят настолько. У меня в компонентах и схемах тоже всё туго, хоть и учился на звукотехника. Зато в механике - шарю. Да и в монтаже электросетей тоже соображаю.
Просто кто-то крутится в этом (ремонт плат разного рода), а кто-то просто восстанавливает для функционирования инструмента и красоты, не изучая настолько подробно данную сферу ремонта.
@@lightbatmen ну автор явно больше стал углубляться, может быть когда нибудь и будут реставрации с родными зарядниками)
@@gear_show try with change resistor tl431
Клеевой шов надо было смочить бензином и подождать 10 минут и не пришлось бы ломать корпус аккумуляторной батареи. Двигатель расчитанный на 9,6 вольт подключил к аккумуляторной батарее 12,6 вольт, превышение на 30%, вывод долго не протянет.
Я очень признателен за то, что вы поделились этим, сэр!
Aren't you putting too much grease on that? Won't it start leaking when it heats?
Yes, I'm. It should be less than this.
Amazing video as usual 🙂. If there arent continuity between any of the commutator bars to each other it is fucked?
You replaced a lot less parts than I expected. The tool looked like it was submerged in water for a year.
Yes, it is from flood in Japan.
4:12 Как в канализационных трубах... (Like a sewer pipe)
yes, it does look like that.. ew
Why always impact driver restoration? But i still like it
Because I can find it.
Do you have a link for the long screw driver bits? They look very handy.
This BROME screwdriver bits set.
Make video restauring old pc
what battery model you used?
really like your content keep it up
Hello everyone! Can you tell me, where do you take all this from?
Hi bro good work how can find this logo stickers
More like igbt welding board than a charger to me.