I have the big yellow one. My first hatch was 100% success with Quail eggs except for one egg that didnt hatch as it wasn't fertilised. I kept the styrofoam packaging around the incubator and on the lid. I think that really helped keep the temperature stable.
all eggs in middle hatch but on edges 10 percent but i guess also one problem turning eggs shoud stop last 2 days or im wrong position to breeth and air sac inside egg when turning after 2 hrs isnt a problem?
just bought a 048-gm-48355 arksen incubator. 40$ off market place. lots of messing around with it. but it seems to be working. have to set to 38.5C for egg area to reach 99.9F. and humidity around 55% when set to 52% and been on for few hours with 1.25 water bottles in. Will be hatching in a couple weeks. will update then,.
@@HarukiYamamoto definitely normal. Anything over 50% hatch rate is usually considered a good hatch. Can be a lot of variables that add or minus hatch rates. Some people may overpack their breeders so there are more males to ensure better fertile at the cost of the hens well-being. I have gotten random batches around 72% hatch rate. But like I said I’m sure I could also tweak a couple more aspects in my incubator. But I don’t know that it would drastically change the hatch rate. Making sure your humidity remains constant and temps remain as constant as possible are your best bets.
We have the bottom left incubator. We find best rate running it dry and use an external thermometer. Best hatch rate we can get, though, is close to 50%… I’ll never buy another Chinese incubator.
Open ventilation if that doesn't lower it enough then you may have to remove excess water until you achieve the humidity level you need easiest method would be a syringe or a turkey baster but if you're in lockdown you want to avoid opening the incubator
The only problem I have is that the turn table is turning every minute and the instructions are no help if there is a way to adjust it so it only turns every hr or two
I have the big yellow one. My first hatch was 100% success with Quail eggs except for one egg that didnt hatch as it wasn't fertilised. I kept the styrofoam packaging around the incubator and on the lid. I think that really helped keep the temperature stable.
Please help with the temperature adjust and humidity adjustments
Watching from kenya
I agree mine never got hot enough,
Gud morning how to increase humidity in hhd ecubater
I have 2 of the 112 egg incubators, appears to be the same electronic. the 38C it comes set at is too HOT. Bought GOVEE bluetooth temp/humid .
try Rcom pro 20 Do incubator
What to do if the temperature is low and not rising up
all eggs in middle hatch but on edges 10 percent but i guess also one problem turning eggs shoud stop last 2 days or im wrong position to breeth and air sac inside egg when turning after 2 hrs isnt a problem?
just bought a 048-gm-48355 arksen incubator. 40$ off market place. lots of messing around with it. but it seems to be working. have to set to 38.5C for egg area to reach 99.9F. and humidity around 55% when set to 52% and been on for few hours with 1.25 water bottles in. Will be hatching in a couple weeks. will update then,.
Any updates ?
@@HarukiYamamoto oh yea this incubator has been an absolute monster. I get hatch rates 50-65%. I’m sure I could tweak it a little bit more too.
@@treksandpreps Thank you. 65% seems low though. Is that normal?
@@HarukiYamamoto definitely normal. Anything over 50% hatch rate is usually considered a good hatch. Can be a lot of variables that add or minus hatch rates. Some people may overpack their breeders so there are more males to ensure better fertile at the cost of the hens well-being. I have gotten random batches around 72% hatch rate. But like I said I’m sure I could also tweak a couple more aspects in my incubator. But I don’t know that it would drastically change the hatch rate. Making sure your humidity remains constant and temps remain as constant as possible are your best bets.
Why does the humidity reading rise up to 99,?
Thank you verymuch. Got helpful!
How can I adjust the temperature sensor offset value? My incubator appears to be reading 2 degrees too high. If I set it to 37.8 C I get 35.8 C. 🙁
Thanks very much for this video
Please the alarm of my incubator keeps on sounding without stop how can I fix that problem
I need help with that also! 😅
Me too
Please share to birds eggs hatching incubator rotation axis processing
We have the bottom left incubator. We find best rate running it dry and use an external thermometer. Best hatch rate we can get, though, is close to 50%… I’ll never buy another Chinese incubator.
how much must be the humidity for chicken eggs
I have 2112 capacity incubator I don’t how to setting machine up can you help me please thank
Send me TH-cam video please
good help on the video
My egg incubator made in China is not turning the eggs on the rollers is there a code I could put in to make the rollers move to test
Hold the reset button to activate turner
Only 8 likes so far? Why, this is GREAT info. THANKS
How do I reduce the humidty? It's at 76 currently and I need 55
Open ventilation if that doesn't lower it enough then you may have to remove excess water until you achieve the humidity level you need easiest method would be a syringe or a turkey baster but if you're in lockdown you want to avoid opening the incubator
The only problem I have is that the turn table is turning every minute and the instructions are no help if there is a way to adjust it so it only turns every hr or two
The set button for temperature adjustment is not working
Can someone tell me how to change my days it’s currently reading 99 days 😅
With Tempreature 38.0 Humidity reach 68/69 how to reduce Humidity until 60? HHD incubator 112 eggs
You have to reduce the quantity of water and you'll drop the humidity rate.
Sory for my english
I bought one of these cheap incubators it has crazy hot spots like one egg will be 101 and the next egg will be 106
My incubator temperature not working showing 20.4
Happens a lot! Get a new high quality incubator. Than it’s really fun but this thing is just not cool. Greetings
My automatic incubator has over
heated and damaged all my eggs
Tq....
Complex one
HM pla