You are keeping egg in wrong way. Pointed side of the egg should be facing down and the other side with air cells should be facing up. How much is your hatcing percent with pointed part facing up?
Imam isti ovakav,ukljucio ga pre 13 dana,sva jaja u donjem redu su propala.Nikako da zagreje donji red preko 34 c,gornji greje super,videcu da li ce sta izaci😊
Pozdrav, imam sličan inkubator koji sam kupio polovan, interesuje me da li kod vas imaju dvije šupljikave podloge na kojima budu pilići na kraju procesa inkubacije? Ja sam dobio samo jednu, ali kako da na samo jednoj budu pilići tj. prvo jaja, a zatim pilići sa oba nivoa? Molim za odgovor, hvala.
Pozdrav. Imam isti ovakav inkubator. Kupio sam ga novog, samo sto je moj iz SAD, pa je na 110 volti. Ukljucio sam ga na adapter na 110V, ali ovaj displej mi se ne pali nimalo. Cuju se zvukovi kad pritiskam dugmad, ali nema nikakvih cifara. Da li znate sta moze biti problem i gdje mogu da nabavim novi displej ako je ovaj pokvaren?
Ja sam svoj narucio preko ebay.com i isto nisam obratio paznju i ustekao ga prvi put u struju 220 volti i inkubator je crkao .Kasnije sam sam narucio adapter 220 na 110 volti.Ako si ga ustekao u 220 mozda je nesto crklo ,odnesi nekom ko se bavi elektronikom.I provjeri adapter sa 220 na 110 dali radi ispravno
bok Samo zato što to iz SAD-a ne znači njegovih 110V oni također koriste 240Vi ako to ne radi nemate što izgubiti, ali pokušajte provjeriti da li ga imate na ugašenom olovu nadam se da je ovo prevedeno ok.
1 Test your incubator to see if it functions properly. 2. Connect the egg turner plug to the control plug inside the egg compartment. 3. Fill one or both water channels depending on local humidity levels. 4. Set the eggs with pointy side down. 5. Close the lid and switch on the incubator. 6. Press the reset button (left green button) to reset and start the day counter from”0″. 7. Keep eyes on the humidity reading and fill the water channels when needed(normally every 4 days) 8. At day 18 you should remove the tray with the turning mechanism and place the eggs on top of the bottom grid. 9. At the same time it is important to fill both water channels to increase the humidity. (This is very important to ensure that the eggshells are soft enough for the chicks to break through) 10. You should never open the lid when the chicks start to hatch. If you do, the loss of humidity will cause the eggshells of the unhatched eggs to dry out and they won`t able to break through the egg.
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
You are keeping egg in wrong way. Pointed side of the egg should be facing down and the other side with air cells should be facing up. How much is your hatcing percent with pointed part facing up?
Imam isti ovakav,ukljucio ga pre 13 dana,sva jaja u donjem redu su propala.Nikako da zagreje donji red preko 34 c,gornji greje super,videcu da li ce sta izaci😊
Do you still have the manual that we can see the pages??
Did you get a copy of the manual for this?
Can I use only one compartment of my 96 eggs incubator for few eggs? If yes do I remove the fan too? Kindly advice, thank you
Yes, you can
The eggs need to be pointy side down, not up!!!!!
Pozdrav, imam sličan inkubator koji sam kupio polovan, interesuje me da li kod vas imaju dvije šupljikave podloge na kojima budu pilići na kraju procesa inkubacije? Ja sam dobio samo jednu, ali kako da na samo jednoj budu pilići tj. prvo jaja, a zatim pilići sa oba nivoa? Molim za odgovor, hvala.
Nema
@@bestfunyvideo Pa gdje onda budu pilići kada se izlegu? Zar mogu svi na jednom nivou?
Planiram da kupim ovaj model, koliko je pouzdan, da li bi ga preporučio? Kakva je izlaznost?
Pozdrav
Please send that the manual it will teach us better
How do I disarm the alarm so it never goes off?
Pozdrav. Imam isti ovakav inkubator. Kupio sam ga novog, samo sto je moj iz SAD, pa je na 110 volti. Ukljucio sam ga na adapter na 110V, ali ovaj displej mi se ne pali nimalo. Cuju se zvukovi kad pritiskam dugmad, ali nema nikakvih cifara. Da li znate sta moze biti problem i gdje mogu da nabavim novi displej ako je ovaj pokvaren?
Ja sam svoj narucio preko ebay.com i isto nisam obratio paznju i ustekao ga prvi put u struju 220 volti i inkubator je crkao .Kasnije sam sam narucio adapter 220 na 110 volti.Ako si ga ustekao u 220 mozda je nesto crklo ,odnesi nekom ko se bavi elektronikom.I provjeri adapter sa 220 na 110 dali radi ispravno
bok
Samo zato što to iz SAD-a ne znači njegovih 110V oni također koriste 240Vi ako to ne radi nemate što izgubiti, ali pokušajte provjeriti da li ga imate na ugašenom olovu
nadam se da je ovo prevedeno ok.
this incubator not best its lot of humidity and temperature issue
What incubator do you recommend that can hold 96 eggs or more for less than $200 USD?
@@venten6444 I PREFER WOOD MADE INCUBATOR HAND MADE IF U FIND THERE OR ANY ONE MAKE AND ITS RESULT BATTER
Explain what u r doing
1 Test your incubator to see if it functions properly.
2. Connect the egg turner plug to the control plug inside the egg compartment.
3. Fill one or both water channels depending on local humidity levels.
4. Set the eggs with pointy side down.
5. Close the lid and switch on the incubator.
6. Press the reset button (left green button) to reset and start the day counter from”0″.
7. Keep eyes on the humidity reading and fill the water channels when needed(normally every 4 days)
8. At day 18 you should remove the tray with the turning mechanism and place the eggs on top of the bottom grid.
9. At the same time it is important to fill both water channels to increase the humidity. (This is very important to ensure that the eggshells are soft enough for the chicks to break through)
10. You should never open the lid when the chicks start to hatch. If you do, the loss of humidity will cause the eggshells of the unhatched eggs to dry out and they won`t able to break through the egg.