Detailed Solar Inverter Installation: A Step-by-Step Guide
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- 5KW Solar System Complete Installation Guide
This video covers the entire process, from mounting the panels to wiring and connecting the inverter.
■ Materials;
● 5KVA Hybrid Felicity Inverter IVEM Series
● 10KWH 51.2V Felicity LiPO4 Battery
● 8 Pieces of 600W monocrystalline Half-cut Solar panels
● Protection Kits
● Installation Kits
■ Best Product to Buy.
Tubular Batteries: wa.me/p/565448...
SMF Batteries: wa.me/p/467970...
Lithium Batteries:
Inverters: wa.me/p/572076...
Solar Panels: wa.me/p/519558...
Charger Controllers: wa.me/p/543928...
Protection Kits: wa.me/p/574748...
Installation Kits:
■ Social Media Links
• Whatsapp: wa.me/23470542...
• TH-cam: / @thetrillsconsulting4081
• Instagram: / the_trills_consulting
• Twitter: x.com/trills_the
• Facebook: / thetrillsconsulting
• LinkedIn: / the-trills-consulting
• Webpage: tinyurl.com/th...
■ Recommended Video
• Communicating felicity...
#popular #viralreels #automation #smarthouse #solar #solarinverter #cctv #cr7 #messi #diyinstallation #green
I would say you guys have tried very well, but you need to improve in safety, then work on trunking with set square, fix inverter first so that you can have a full view of the breaker box positioning. Well done guys.
In the installation of the panel what of slippy roof top how do you cope
@@igokskelvin5649 depending on the slope of the rooftop, you have to get scaffold first, get a ladder, put your profile from edge were you can reach so that it will serve as your standbase screw it firmly and then step on it to put the second step, you can go on and on like that. But be very careful, if you are not comfortable doing that, find a space and mount it eg carport
Very interesting. Slightly different from the metal roof clamps and rails I have.
Not sure why using 10mm solar cables cos all panels in series and so the voltage should be under 1000V at most. 4mm and 6mm are fine unless you do parallel.
You are correct, just for safety. Thanks.
Nice job 👍
Can you do a detailed video on the surge/breaker connection, as well as the connection to the distribution box and change over
You can message us on Whatsapp, that will be a paid video. +2347054234162
Well done guys, boss I will like to learn from you. I lives in lagos
Contact us on whatsapp +2347054234162
they have try , but safety is important
The question about why U doing a series connection should be best answer by saying, it best to work on a higher voltage than a current.
Hi, very good
Can this power air conditioner, summor, hitter and iorn
@egwumichealu6494 it can power 2HP submersible pump preferably during the day and 1.5HP inverter AC consecutively. For ironing you are advised to use inverter iron (300). For water heater, 1000W water heater is okay during suntime (only the water heater should be powered).
Great job! Please work on your safety procedure, which is very important. There are safety rope and hangers to keep you safe up there. Great job
Thanks
Well work guys 😂😂😂😂😂😂
Please clarify where you said the charge controller will convert excess voltage to current
There are different types of charge controllers:
•PWM (Pulse Width Modulation): These controllers reduce the voltage by chopping it down to the level that the battery can safely handle, effectively wasting some of the energy.
• MPPT (Maximum Power Point Tracking): These controllers are more efficient as they adjust the input voltage and current to optimize the power going to the battery. They convert excess voltage into additional current, ensuring more efficient charging without wasting energy.
In summary, an MPPT charge controller can convert excess voltage from the solar panels into additional current for the battery, making it more efficient than a PWM charge controller.
Nice job...but you guys should work more on safety while on the roof.
Thanks
Pls each panel is how many volt?
Nice job but I believe a breaker should be for AC input not voltage regulator... And a breaker also (RCBO) should be for the AC output to protect electric shock and more in the house... The voltage regulator will be in between the two breakers.
What the breaker does is to break(open) when a current higher than it rating is detected. Meanwhile, what you called a voltage regulator is actually a Voltage and Amperage protector, which encompasses the function of a MCB.
I have a problem with gas air-conditioned,
What device did you gave the two surge breakers to?
I am thinking one for A.c input and another for D.c input I mean the cable coming form the panels.
but the two SPDs look like an A.c SPDs
The Inverter and controller
Okay but the inverter is hybrid and per the video you didn't tell us there is charge control among the connection Or?
@@nelsonerico9203 Yes, it's Hybrid. The AC surge for AC input, the DC Surge of DC Input, that's the PV.
The inverter is how many volt ( dc)
@@waheed002 48V
Your dc cable size is too much, 2.5mm cable would have be good but for the purpose of efficiency 4mm is okay but using 10mm dc cable there will be lost of pv charge from the arrays
You can't have losses by increasing cable cross sectional area.
Hi
@@AugustineDeen hi