This is informative, if i add an ac surge protector at the output of the inverter in parallel will an AC breaker does it protect the inverter from inrush currents that might be caused by short circuit from the equipment in the house
The fuse in the AC line is on the inverter output line. I had a case of the inverter that went bad(was giving out 250V) the fuse saved things from blowing off.
That yellow earth cable at 10:11, where does it get connected to eventually? Or two of the earth terminals just need to be connected like that and that's it?
Thank you for this very detailed video.
May you please upload the circuit diagram
Where can we find these to buy? Do they also protect against lightning?
Please make video on how you wired the protectors (CB, SPd, Fuse, AVS)
We will sure do, just turn on your notification button
@@zurriannetworks done 🥹
How to set the automatic voltage protector
The setting is always on the manual.
But depending on the brand you have, the settings most times are pretty much the same
Secondly did the SPD need any rating
No
Just get either AC SPD or DC SPD depending on where you want to deploy it.
This is informative, if i add an ac surge protector at the output of the inverter in parallel will an AC breaker does it protect the inverter from inrush currents that might be caused by short circuit from the equipment in the house
do you need fuse when there is a circuit breaker of appropriate rating?
The fuse in the AC line is on the inverter output line. I had a case of the inverter that went bad(was giving out 250V) the fuse saved things from blowing off.
That yellow earth cable at 10:11, where does it get connected to eventually? Or two of the earth terminals just need to be connected like that and that's it?
Both(and every other earthing terminals) are connected to earthing system of the building.
Okay thanks. A video of these components being connected in an installation would be great 👍