Welding Table DIY with Clamps and some other Ideas

Please support my channel by buy this plan: www.etsy.com/listing/1673261698
Inbox me: / vuvt.workshop
#vuvt #weldingtable #weldingtablediy #weldingtablewithclamp #diyweldingtable

[@VuVT-Workshop]

Please support my channel by buy this plan: www.etsy.com/listing/1673261698
Inbox me: facebook.com/vuvt.workshop

[@5hilovsky934]

Отличный стол, спасиб за идею 😊

[@TheGoatShowMan]

Thats a bad ass table, congrats! As good as I've seen yet. Domo Arigato.

[@TheMbn1972]

Thats an awesome table and an awesome build video.....lots of creative and functional details!

[@VuVT-Workshop]

Thank Bro!

[@ThePiitteri]

You are a master of your craft. Thank you for ideas

[@VuVT-Workshop]

Thanks Bro!

[@HisNameIsTater]

Nice job! i saved this as this is very close to what I'm building and really like some of your ideas. Well done sir!

[@VuVT-Workshop]

Thanks Bro!

[@lowtech_1]

Like those extensions 👌 great idea .Thanks.

[@VuVT-Workshop]

Thanks Bro!

[@kevincinnamontoast3669]

Lovely. Great table. Thnx for your hard work.

[@VuVT-Workshop]

Ok Bro!

[@thepagan5432]

Nice job, a good weld/assembly table is worth it's weight in gold. 👍👍

[@VuVT-Workshop]

Thank you Bro

[@andyb7754]

Vewry nice build. Thank you for the video.

[@VuVT-Workshop]

Thanks Bro!

[@mikesnifferpippets3733]

Very nice table. I like how you used separate plates and didn’t weld them to the frame (keeps from warping when welded). I never though to use 2 pieces of angle iron to box the slide extensions, another great idea!

[@VuVT-Workshop]

Thank Bro! After a long period of use, you can turn the iron plates over and you will have a new table top

[@gb4408]

Did you drill the table plates yourself, i never saw you do that, or were they pre-made?

[@enricodigenova8112]

Great job love the table 👌👌👌

[@VuVT-Workshop]

Thanks Bro!

[@EverydayWorkshop]

Great job, I like the design. I’m planning on building a new welding table and love some of your ideas. 👍🙂

[@VuVT-Workshop]

Thanks Bro!

[@darejka888]

Very good solutions, congratulations to you.👏

[@VuVT-Workshop]

Thanks Bro!

[@mikequas4384]

Best designed fab table I've seen in a while. If you could make a set of plans for that table, it would make a relly nice side hustle!

[@VuVT-Workshop]

Thank you, I will make plans for it soon

[@WinstonWolf187]

Yep… Really, really nice job man. You get some plans made let us know!

[@user-dh3vy8wm7e]

Dude this table is genius

[@VuVT-Workshop]

Thanks Bro! See my other projects

[@user-op9jp4vf5k]

Шедевр, всё продумал!

[@VuVT-Workshop]

Thank you

[@Buggy13061985]

Awesome Table 👍😊💪

[@VuVT-Workshop]

Thank Bro! Check out my new version of the welding table with lift function

[@jcg7990]

This table is sick

[@Buggy13061985]

Bau erst mal einen besseren 😂

[@user-vq8sp7ch5t]

좋은영상 감사합니다

[@VuVT-Workshop]

Ok Bro!

[@mohamedrahal4829]

Well done, long, very beautiful. Well done, hero. Excellent work. My regards to you❤❤❤❤

[@VuVT-Workshop]

Thanks Bro!

[@robertoloreto7901]

Ótimo trabalho! Parabéns

[@VuVT-Workshop]

Thanks Bro

[@jaroslavkukucka736]

Nice

[@DazFab_Metalworks]

Nice work.

[@VuVT-Workshop]

Thanks Bro

[@Everythingisgoingtobealright]

nice table and video.

[@VuVT-Workshop]

Thanks Bro!

[@crazychop7966]

Классно 👍🏼

[@user-oq7xg8jo5g]

Nice work

[@VuVT-Workshop]

Thanks Bro!

[@tnguyen5925]

Được lắm bạn ơi ❤

[@VuVT-Workshop]

Thanks. Qua fb giao lưu nhé B

[@bubusquidgame1588]

Cái bàn quá chất lượng....!!!!

[@VuVT-Workshop]

Thanks Bro!

[@itzsamdiy]

Nice build

[@VuVT-Workshop]

Thanks Bro!

[@chrissample3047]

Good idea of adjusts on bottom legs

[@VuVT-Workshop]

Thanks Bro!

[@jeffnix3307]

Well done

[@VuVT-Workshop]

Thanks Bro!

[@marianradu6856]

Nice welding table. I have been using Sigemund welding tables for a long time. Make stops in the holes where you can support yourself with the pipes when you weld them together and then they are already set at 90 degrees. this if the holes are made at 90 degrees.

[@VuVT-Workshop]

Thank you. That's a great idea 👍

[@yurievich_workshop]

зачётный стол. Многое продумано.

[@VuVT-Workshop]

Thanks Bro!

[@jayquast2910]

Hi there, wonderful build. Can you please tell me where you got your bolt for the floating table, I can’t find them anywhere. The ones that I have found have shoulders on them?

[@VuVT-Workshop]

Hi Bro! I do not understand what you mean. Are you finding: "Flat Head Socket Cap Screws"

[@aishora-di4fm]

Прекрасный стол! Я бы хотел иметь такой без всяких изменений!

[@VuVT-Workshop]

Connect me via facebook

[@averybrown5888]

like it

[@VuVT-Workshop]

Thanks Bro!

[@joshwhitehead2045]

This is terrific work!! What side steel are you using for the frame? It is 40x40 or 50x50 SHS? I can't quite work out on your video.

[@VuVT-Workshop]

Thanks Bro! It is 50x50 mm

[@xerbababa]

I've been looking at reproducing this table for my build. I'm fairly confident on build dimensions using some 3D drafting software and spending sizeable time with your video. I have been looking for the cabinet you used. Can you identify make/model or at minimum, can you identify size (length, width, and height) of the green cabinet? Thank-you

[@VuVT-Workshop]

Great. The cabinet is made by OS company in Japan. WxH: 42x54 cm

[@nevzatmumcu1918]

Meister der Kunst ❤

[@VuVT-Workshop]

Thanks Bro!

[@nevzatmumcu1918]

​@@VuVT-WorkshopCan you please write down the dimensions and the number of pieces would be very grateful.

[@VuVT-Workshop]

@@nevzatmumcu1918 One plate is 12mm thick, length x width: 700 x 200 mm

[@nevzatmumcu1918]

@@VuVT-Workshop Danke

[@zonenhonig877]

Hi, cool idea, well done! What size do the pipes have? 40x40 x 2/3 mm?

[@VuVT-Workshop]

One plate is 12mm thick, length x width: 700 x 200 mm

[@Ropetangler]

Lots of good ideas with your table, and I really liked your feed roller for the bandsaw shown at the 40 second mark. Did you fabricate that yourself?

[@VuVT-Workshop]

That roller is from Makita. Thanks Bro!

[@Ropetangler]

OH, O.K. I will have to see if they are available in Australia. Thank you for your prompt reply.@@VuVT-Workshop

[@phucnguyenCNC]

Đẹp!

[@Precivilization]

Very nice!

[@VuVT-Workshop]

Thanks Bro

[@michaelchristian8220]

There's a couple people that are certified welders here. I feel like most of us that watch this aren't worthy of even attempting to weld anything. We should probably all just give up on life, switch sexual preferences, and start stealing catalytic convertors. 😂
Dude this is a great little fab table. You can get by with a lot simpler, but a table like that sure is easier and less frustrating to work on. Congrats

[@VuVT-Workshop]

Thanks Bro!

[@andrejsimcic4771]

What is the thicknes of the steel plates on the tabel?

[@rickardocalles2473]

Exelente sería genial si pudieras poner las medidas del material 🤙

[@VuVT-Workshop]

Thanks Bro!

[@gustavoabarzuavega3539]

Excellent work, a question, what diameter are the holes in the table and how much separation is there between each one? thank you

[@VuVT-Workshop]

The holes have a diameter of 12mm, the distance between holes is 50mm 🙂

[@gustavoabarzuavega3539]

@@VuVT-Workshop Thanks

[@farmaproderma]

REally nice! Would you share/sell the plans?

[@VuVT-Workshop]

Sr. I don't have a plans

[@knightrider6478]

Hello, nice build. Which is the thickness of the plates and length? In metrics if possible. Thank you !

[@VuVT-Workshop]

One plate is 12mm thick, length x width: 700 x 200 mm

[@bernarddehon8040]

pourriez vous SVP me donner les dimensions de tous les tubes avec le plan complet merci

[@philjohnson725]

Nice, but only possible for people with all that expensive tools and machines.

[@VuVT-Workshop]

Thanks Bro!

[@nullkuhl]

Awesome job, what is the thickness and dimensions of top plates?

[@VuVT-Workshop]

One plate is 12mm thick, length x width: 700 x 200 mm

[@andrejsimcic4771]

Did it warp or bend over time?

[@VuVT-Workshop]

@@andrejsimcic4771 I'm just DIY

[@rogboak]

Good job on the table! Question though. When finishing your welds after fit up and tacking, why don’t you run a bead on anything as opposed to just lots of tacks? Great job otherwise!

[@VuVT-Workshop]

Thanks. Because I'm just a DIYer, not a professional welder :D

[@Leandxeneize]

amigo Friend. cual es la altura de la mesa desde el inicio del piso hasta la chapa perforada

[@VuVT-Workshop]

Table height 80-90 cm is suitable for me

[@Leandxeneize]

@@VuVT-Workshop muchas gracias thanks

[@phutran8899]

Hi Ad. phần sắt làm ray nới rộng bàn hàn là sắt hộp và V mấy vậy. Thanks

[@VuVT-Workshop]

Hộp 30x30. V là mình cắt laser sắt tấm ra rồi chấn vuông góc thì mới ôm vừa sắt vuông 30 được B

[@phutran8899]

@@VuVT-Workshop cám ơn Ad.

[@phutran8899]

@@VuVT-Workshopmình có thể đặt mua từ bạn 4 cây V chân được không

[@VuVT-Workshop]

@@phutran8899 ok, inbox facebook trong mô tả nhé

[@pietstephen7776]

Those c clamps...are they magnetic??

[@VuVT-Workshop]

They have no magnetic
I soldered the screws below. Haven't watched the full video yet?

[@lephihung6091]

Kk. Em đoán đúng rồi: làm clamp :))

[@VuVT-Workshop]

Cao thủ 👍

[@nhatanvlog3601]

kẹp bàn đó mua ở đâu vậy bạn .

[@VuVT-Workshop]

B tìm cảo F là ra, cũ mới đều có bán

[@trieuphuongcdk892bg]

Tổng thiệt hại hết bao nhiêu vậy bác

[@VuVT-Workshop]

gần 20 củ b

[@ruizvial]

que espesor tiene la plancha?

[@VuVT-Workshop]

12mm thick table top plate

[@ruizvial]

Pense que todas las mesas de trabajo de soldadura profesional, eran de 16mm, pero noto que no es necesario, averiguando mas, las mesas de buildpro 5/8 son tambien de 12mm. Eso no solo alivia mi presupuesto, si no que puedo hacerla con los herramientas que tengo, Gracias, buen trabajo tu video es una gran fuente de ideas para este tipo de mesas de trabajo en el taller. @@VuVT-Workshop

[@VuVT-Workshop]

@@ruizvial Yes, I am DIY, and I am also very interested in saving costs, so I chose 12mm thickness. Thank you for your interest in this table

[@SergeiPetrov]

And where did these perforated metal plates come from?

[@VuVT-Workshop]

laser CNC cutting machine 🙂

[@bogdanznak1990]

Vot stail is this?

[@VuVT-Workshop]

I do not understand

[@motiontvufop1319]

buying link is broken

[@VuVT-Workshop]

Please contact me using facebook in the description

[@Kozak450]

just buy claps.

[@user-db4wy2ij7l]

Всё надо отдельно держать он стола потому что калины от сварки и болгарки будут падать на них

[@VuVT-Workshop]

Ok Bro!

[@user-19]

А покрасить ?

[@VuVT-Workshop]

Of course. Painting is necessary

[@dragons_den9690]

share the plan plss

[@VuVT-Workshop]

Sr, I don't have a plan. This is a project I did for myself. If you want to know the size, I can measure it for you

[@d1v1s1onby0]

Sorry, this item and shop are currently unavailable - thats a shame 😞

[@VuVT-Workshop]

You can contact me by facebook

[@dwaynelejeune3508]

I would not set the spray can on bottom end of cart!!! Your asking for an explosion when a piece of HOT slag fall on it, not IF WHEN cause it will happen!!! 💥

[@VuVT-Workshop]

OK thanks. I will fix it

[@protator]

now all you need to do is learn how to weld

[@moogle9168]

I don't know anything about welding, what did he do wrong?

[@protator]

@@moogle9168 You know, I almost fell for it.
Bad troll, go away and watch more fabrication videos.

[@Lwimmermastermetalart]

One of the best welding table designs I’ve seen on here. Working on one myself and I do believe I’ll incorporate some of your ideas.

[@agnosticevolutionist3567]

Hahahahahahaha

[@mattivirta]

screwdriver have totally shit, need buy new all set. bahco screwdriver have lifetime warranty can pic up free if go broken.

[@VuVT-Workshop]

Ok thanks

[@jackskalski3699]

Watching from a perspective of a person who wants to build one myself... the video doesn't show any of the interesting parts. So making of accurate holes in the plates + positioning the places precisely + in-depth leveling setup. The rest is not that important. In other words didn't see anything of value to me.

[@VuVT-Workshop]

What I'm doing is sharing that idea. What you need to do is equip yourself with knowledge. You think that creating plates is extremely difficult. That's because your knowledge is not enough. Using CNC laser cutting technology, you can cut anything to the desired size. In the comments section, people also politely asked me the size of the plates and I also shared them. If you asked me politely, I would be willing to share, but you don't know how to do that, which is sad. Or if you have search skills, you can search on company websites. Finally, you should remember that each person has different needs

[@johnnycassart3769]

Terrible

[@user-rp6sv2hx5s]

👍 super 👍

[@VuVT-Workshop]

Thank Bro!