At 2850 Mhz for the 975 mv the rest of the curve nodes were off the top of the chart and I couldn't select them to flatten the curve, lol. This worked though so thank you! I have to push them twice though, incase anyone needs that.
Don't do like this!!!! May be it is just my situation, but if u flat your curve with ctrl+shift msi can sometimes change your curve automatically (you can have some curve "stairs" at the end). So to be sure just drop your marked zone down and then apply it to let msi afterburner flat it by yourself. I have rtx 4070 super gaming oc gigabyte
U really are my savior, my 4070s inno3d x3 oc is 84 celsius degrees in tower 300 case and after I apply 2550mhz 900mV and now is just around 60 degrees with 2/3 power consumption ( ~145w vs 215w stock ). Again, THANK YOU VERY MUCHHHHH
@@user-fo9ce3hr5h Well, if you check reviews of this Inno card you will see that 84 C is normal for this card. Now everyone have Aorus, Tuf, Trio or Panthera tho.
@MinhTran-6j6ic same here, my 4070s inno3d x2 also 84 celcius by default when playing triple A games in mini itx case. i followed your settings and it works same as yours thank you so much
Thank you so much! With your tutorial I significantly decrease the coil whine and finally now I can just hear the noise from the fans. Awesome! Your are the best!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Thanks for this! Playing space marines 2 and from my comparisons I gained a couple frames (3-4 on average), my consumption went all the way down from 220+ down to 160-190 watts and the temperatures are at least 5 degrees lower. I'm very happy and you earned my like!
just undervolted my 4070 super gigabyte windforce oc. max temp is now 59-60c from 68-72c and gained few more fps as well. even with ray tracing/path tracing on and 100% gpu load the card is almost silent. very very happy with this card so far. upgraded from a 3070 standard (that was a good card also).
@@philiphansen1103 i fear the triple fan would fit in my tiny case, or not... the one i am looking is like way too long. also, dual fans are bigger than triple, have huge thick heat sink fins+consume less overall wattage, while compromising on fan noise. its a trade-off one way or the other.
What did you end up undervolting to? That’s the card I’m waiting to buy atm and I’m trying to see what people are setting for their afterburner settings
@@deepak_nigwal I have a dual fan version (MSI Ventus) since a bigger card won't fit in my small PC, but the first results (after undervolting) are very promising: about 37 degrees when idle and max 65 degrees under heavy load (100% GPU and ray tracing etc). Because the card runs relatively cool even my CPU is now 10% cooler.
Thank you very much, I've had a power consumption decrease of 50W in RDR2 and about 15 degrees (celsius) temperature decrease while having a more stable framerate. All that with your basic setup, so thanks that was easy :)
Very good video, thanks. I used this method for my KFA2 4070 Ti Super, now it draws around 35W less and the temperature is 5°C lower than before the undervolt. Good enough for me! Thanks again for the great tutorial sir.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I followed your guide for undervolting my 3070 with great success, and now for my new 4070s this guide is once again a big help! About 40W less consumption than my 3070, better performance and I still have to hit 70 degrees C even under heavy load!
This is soooooooooo perfect! I got the Zotac one 2 fan and my presets that perfectly work are: 975mv at 2650MHZ with +500 on the memory With these i was able to archieve MAX 80c playing Alan Wake 2 With RT at low. You are the best!!! Thanks for all the tutotials!
I undervolted my GPU using your guide and it was very concise and helpful. Instantly 5°C lower on average, with the GPU hotspot dropping 10°C, power draw is lower, and the fan speed dropped from 60% to 48% which is much better on the ears!
Do you have 4070 super asus dual? i want to buy this for my 3d heavy pretty projects. i wonder if the temp is high or not? bcuz it fits my budget. if it goes too high temp, i should wait 3 month to get a 3 fan.
Bros helping me out once again. Used this guys older video for my 3070. Used the 4090 one for my 4090 a while back. And now used this one for the 4070 pc i just built. All to reduce the horrible coil whine. Its so good at reducing the coil whine with no performance loss
Hey, I noticed that the undervolting method that you use for 4000 Series cards is different than the undervolting method you used for 3000 Series card (such as the 3070 undervolt video). What are the differences between the two methods? Is It safe to use this method even for other cards?
Because rtx 40 series is stubborn sometimes, i tried undervolt my 4070s with old method it doesn't work, after i hit apply it only work for few seconds but after that my gpu frequency and voltage increase above the undervolt preset
Very good point! RTX 4000 behaves differently when it comes to effective clock. The method used on RTX 3000 I deem a bit superior actually, because you have absolute stability on the lower end of the curve. But it would lose you clock on RTX 4000, so we can’t do it. But in the end, they’re basically the same really :)
@@ImWateringPSUsJust curious. Did you learn this from trial-and-error experiments? Or, is there a way to estimate the result depending on the architecture?
Following these instructions with my Palit 4070 Super 2x I have crash problems in gaming with any undervolting preset, even the lightest. I crashed Cyberpunk, A Plague Tale, and The Last of Us. Sometimes it runs fine for hours, other times it crashes after 10 minutes, so I went back to the factory voltage and turned on a custom cooling curve.
Thanks for this guide. My 4070super MSI Ventus2x OC works perfectly on 0,95v 2700mHz core and memory +1600. Max temp was 66 degrees in Avatar:Frontires of Pandora on max settings, DLSS off, 1080p with average FPS 70-75 (FG off).
2640Mhz/900mV works (so far) :) thanks for the video. Fun to see that performance drop from 2750Mhz/975mV is minimal, less then 2,5% for -5% Mhz and -7-8% temperature.
I want to thank you; your advice helps me save 60W of electricity. At first, I considered buying an AMD GPU because it’s slightly cheaper and 10-15% more powerful, but it uses 100W more power. Even with undervolting, it matches the 4070's stock power usage. Choosing NVIDIA was an easy decision for me.
Friend, an important question that I remembered at this moment, you talk about efficient undervolt, and in performance, the graphics card doesn't heat up? What temperature does your GPU reach in performance? TKSSSS
Thanks a lot, made 3 profiles, 2600 mhz 0.9 2750 0.975 and full clock at 1 volt. But really thanks for both the presets and the tutorial on how to find my sweet spot.
hey bro, i have an issue, i undervolted, created both profiles, but in the performance one, in game it goes from 2760MHZ to 2550, resulting in lowering the fps by like 15-20, also it lowers the voltage from 0.975 to 0.925, any idea what causes this? please give me an answer ive been looking all over the internet.... my card is PALIT 4070 SUPER DUAL OC
I can up my memory clock with +1000 or +1200 (saved and working) but when doing the voltage stuff (from 900 to 2550 or 950 to 2550 or 900 to 2450) my memory clock drops to 810 MHz? I am not sure what is going wrong….itbis a shame because the power dropped about 60w. Can someone please help me? I have a Asus RTX 4070S Dual and AMD Ryzen 9 7900 setup….
I got the very same card as yours, 4070s ventus 2x. The question is, why after i copied ur curve i pressed apply, in afterburner im looking at 2500ish mhz when in your scenario it is 2745 (4:44)? But during gaming IT IS 2745
Amazing tutorial, thank you very much! I have the same card 4070 super 2X Ventus, and it helped a lot. I got 11% boost in fps for Cyberpunk 2077 (from 55,69fps to 60,71fps) on 1440p Ultrawide. Also consumption went from 212W to 191W and temperature went from 69°C to 67°C.
Hi thank you for the video. Was wondering why my memory clock switch back to 0 insta ? i have an asus 4070 super oc edetion (so factory oc) dunno if that is the problem.
Thanks for showing this card, I have the exact card and like it but I have one issue. I can't adjust the fan speed to under 30%. it's either 0 or 30-100%. Is there a way to fix this or is it impossible due to the BIOS?
It’s a bios issue. You can technically flash the bios but I unfortunately wouldn’t really recommend it as it’s a little tricky to find and equivalent fan speed, unfortunately
@@ImWateringPSUs I have this same issue. Apparently, some Nvidia cards have set fan control limits where third party software can't set the fan speed below a specific %, most commonly 30%, preventing you from setting it to 0 rpm (idk why tho). I use Fan Control however to set my fan speeds which has a built in workaround for this
I had recently purchased a 4070ti S dual OC and was tired of the temps pushing higher and higher, I went with 2625mhz for the clock, and the temps are so much better, paired a 5900x It's great
I followed the steps for your underlcock, but for some reason my GPU clock keeps fluctuating down below 2500mhz, even at max power limit it floats around 2100mhz. If I lower the power limit to 100 (mine goes to 110 max) core mhz will float around 1600mhz. The lower my power limit goes the worse the FPS performance in benchmark is. I also noticed firestorm reports it still sitting at 925mv even though I set the curve to 900 in afterburner. My PSU is only 600 watts and powering my GPU on 1 rail, I'm wondering if that might be why?
@@ronwladyka8127 I settled on 2730Mhz on the gpu and +1900Mhz on the vram and that has been 100% stable for a couple months now. I've seen as high as 75C when playing Star Wars Outlaws but it's usually right around 70C. I'm playing Indiana Jones today on ultra settings with full RT and it's at 68C while using 100% of the gpu.
Thanks brother you literally saved my GPU idk why but my gigabyte oc edition GPU at stock settings was running fans at 100% and showing no display underload but your settings saved my GPU can't thank you enough ❤
My 4070 super crashes on the efficiency preset if I'm gaming and watching youtube at the same time. Not sure if that's because of the undervolt or my in game settings but either way it's very annoying. Switching to the performance preset, hopfully that solves it.
Amigo, whats up with 4070ti? I bought one, im happy with temps on stock, but my afterburner saved settings after startup are little changed (afterburner by itself adds a little more voltage, curve is modified), every restart A LITTLE different values), the same with ex 3090 card. Someone said - save settings on full GPU load (like unigine or other program), but anyway afterburner changes A LITTLE that voltage/frequency curve 😢
lets go !! best content as always ma man ! My zotac twin edge oc 12gb very stable 975mv at 2805Mhz with +1600 memory clock. 3dmark port royal stress test 50 loop smooth like butter,CP 2077 max setting with path tracing no crash . -20w than stock ,+ 10% fps performance ,and 71-76c temp. Thanks mate !!
Many thanks to you. I was able to get a stable 2820mhz at 1,000mv and +2000 on memory clock. I have the exact same card as you show in the video. I think I actually set it in the curve to 2822mhz, but in Cyberpunk it'll start at 2835mhz and after a few seconds drop to 2820mhz and stay there.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Ciao, ho una ghost 4070 s ho provato ad impostare 80% power limit e 250 mhz sul core, tutto benissimo, dopo un po’ è crashato. Hai consigli da darmi? Sono poco pratico! Grazie
Sadly this didn't yield the same results for me on my Asus TUF 4070 Super. 2.97% uplift in performance. Not sure if I did something wrong because your Afterburner shows a static 2745MHz but mine changes and doesn't go above 2520MHz despite applying the curve editor to 2751. I checked on the Timespy results and it's showing at 2730 so I think it worked.. Timespy 1440p with standard GPU - 20794 Timespy 1440p with performance uplift - 21413
Ahahahah I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Hi, I have your used your guide with great success on my 3060 Ti before but when im trying to undervolt my 4070 Super my memory is going from 11500 down to 5000 and then up again. Only occurs when Im trying to undervolt it. Have tried both 900mv and 925mv but it still happens. Do you know what it can be?
Hello friend, how are you? I have the 4070super ZOTAC dual fan, I did the efficiency procedure, it dropped 8C° before 74 now 67/68, fan curve do you recommend? Would it be interesting not to do the UNDERVOLT but rather the fan curve? Thanks for the help.
Hello friend, I would like to thank you directly from Brazil. This is a hot country and I was getting 75 degrees 100% on a 4070 super galaxy, It's still cold by his standards. but I chose to have a more comfortable temperature. with its profile it is a maximum of 68 degrees and 80 hotspot. thanks!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Hey I have the same GPU as you and just applied the same exact settings thank you! I have been noticing some dips in performance and the computers cursor slowing down any trouble shooting tips you recommend?
Wtf you life saver i have a new build, my RTX 4070 super was getting upto 84c with a bit of coil whine was loud as hell now it wont go above 70c THANKS!
I hate that everytime I search for undervolt GPU i fond you because you never show power usage GPU (watt) in your video then how tf we know that Undervolt actually work?
Ciao. Scusa ma non ho ben capito i risultati dei settaggi fatti. Dato che mi pare che tu sia italiano, potresti sintetizzarli per iscritto? Grazie mille
Bruh, I VERY rarely leave a comment on youtube but this was so simple to follow & worked perfectly for my ASUS 4070 Super Dual OC GPU. I'm using your preset 2 and it's only about 50hz lower than my GPU was boosting to on stock settings while running 8-15c cooler & my power usage under load went from like 212w to roughly 160w... almost a 25% decrease in power usage!! Even my Hotspot temp dropped a decent amount :) Thanks a bunch for this, dunno if you'll see this since 4 month old video but wanted to let you know its still helping peeps! Cheers, liked n sub'd Edit - Forgot to mention it brought my 3DMARK TimeSpy score up 19803 from 19339 & my Steel Nomad score up to 4969 from 4608
Hey, I just got this GPU and I’m about to undervolt it. How has the undervolt held up and what’s your boost score? I have an Asus 4070 super dual OC Evo. I’m not sure what the differences between the evo and non-evo.
@@kkmcgamerI also have Asus 4070 Super Dual Evo and it's the worst card I ever had. Hot, loud, only 2670mhz boosting... The case is Lian li lancool 216 with bottom and external fans mounted. The airflow is no problem at all.
@@Prorayque it’s such a garbage cooler, i thought it was the same like the regular dual but it’s so much worse. Without my undervolt it will probably be at like 70-75c with the fans screaming at 2000-2300 rpm. I honestly might try and complain to Asus and try and fight for a replacement regular duo version because there is no mention anywhere that the coolers are this different. I’m also using a msi mpg gungnir 300r airflow and airflow is definitely not a problem, I even added 2 intake fans below the gpu and they barely made a difference. Did you end up returning the card?
@@kkmcgamerI also noticed that the bottom fans (140mm Arctic Cooling P14 Pwm PST) as intake didn't make a difference, maybe 1-2c and I find that quite disappointing. Not sure what I'm going to do, probably gonna sell it and than buy a triple fan card. Gaming X, Asus Prime, Tuf gaming, etc. Dual fan never again.
Ciao, sto provando a seguire il tuo tutorial… tuttavia non sembrerebbe apportare alcuna modifica alla mia 4070s… consigli? in più quando apro alcuni giochi c’è un forte rumore dovuto al Coil Whine… consigli anche per questo?
Bought gigabyte windforce version of SUPER. I will be using your tutorial as a guideline and in the coming days I'm gonna find out my sweet spot. But I can already tell I will use 2 presets, one for just windows/movies and other when Im gaming. See where I can land. I also think that for this kind of work, you need to have a decent PSU, so I bought a '(good one I hope) on top of the card.
Hey bro, one question, shouldn't be opposite when you undervolt gpu(decreasing performace but also temp and voltage) im reading in comments that people got better performance while still using ultra settings
When you undervolt a card, you are not decreasing performance. You decrease voltage, at the risk of stability. Cards at stock setting usually hit power limit first, because the curve is set to run ALL OF THE CARDS of the same model with ABSOLUTE stability, they can't risk crashes with lower quality silicon, so the Frequency-Voltage curve is set a little higher, than the cards actually need. With lower voltage, you reach that power limit later, with higher clocks. So really you just tweaking efficiency. With a more efficient setting, you get more performance from the same power budget.
I used the efficiency preset on my 4070 Super Twin Edge but it will not stay at 900mv, it insists on staying at 925mv. Even if I use 875mv, it still runs at 925 mv
@@miguelaraneta3144 Thank you for the info. Still I see it without load happy at 0.860V. However load 0.925V. The only thing the curve thing UV does, is limit my max Clock, but not the Voltage ...Genuinely how did he get 900mV ...
My 4070 super is 0.925 2670 mhz, or 0.985 2850 Mhz. If you set the clock too high, potentially it's not hitting the target Mhz, because power limit, thermal limit, or gpu incapable to go that high on that specific voltage point. Set higher voltage potentially if you want to set the gpu that much higher. Or set lower so you save power and stays below the power limit.
Finalmente qualcuno che ha fatto un tutorial semplice senza troppe informazioni inutili! Ti consiglio solo, dato che fai un video in inglese, di usare la lingua inglese anche nei menù di Afterburner.
it's very clear as I push close to the voltage limit, I need more and more power to gain fewer and fewer mhz. On Ada GPUs UnderVolting is much smarter especially in an ITX case which most 4070s suits😂.
My 4070 super FE is stable at 975/2800 and 1600MHz Memory clock should i even bother going higher on the mem clock? temps down 10°c and power draw is down 50w, thank you for this video.
Honestly it’s very good already, I’d leave it like that! I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
@@ImWateringPSUs I'm already subbed bro, you make great content, I decided to just see how far I could push it and my card is stable at 2000mhz mem clock haha.
![2 Fan vs 3 Fan GPU: MSI RTX 4070 SUPER VENTUS 2X vs VENTUS 3X [Performance, Noise, Cooling & More]](/img/n.gif)
It works! With your first preset, palit 4070 super dropped from 70-75 in warhammer to 60-65. No visible performance lost. Will test it out further!
you can also flat the curve by pressing ctrl+shift +enter
Very true! Thanks for the comment
@@ImWateringPSUs Thanks for this, I couldn't get the curve to flatten the other way :)
At 2850 Mhz for the 975 mv the rest of the curve nodes were off the top of the chart and I couldn't select them to flatten the curve, lol. This worked though so thank you! I have to push them twice though, incase anyone needs that.
how, I am pressing it and it just allows me to put manually the value. I f I press enter it puts it flat but when I apply it it goes curved againg 😣😣
Don't do like this!!!! May be it is just my situation, but if u flat your curve with ctrl+shift msi can sometimes change your curve automatically (you can have some curve "stairs" at the end). So to be sure just drop your marked zone down and then apply it to let msi afterburner flat it by yourself. I have rtx 4070 super gaming oc gigabyte
U really are my savior, my 4070s inno3d x3 oc is 84 celsius degrees in tower 300 case and after I apply 2550mhz 900mV and now is just around 60 degrees with 2/3 power consumption ( ~145w vs 215w stock ). Again, THANK YOU VERY MUCHHHHH
what do you use of your gpus that goes to 84 celsius?
@@user-fo9ce3hr5h Well, if you check reviews of this Inno card you will see that 84 C is normal for this card. Now everyone have Aorus, Tuf, Trio or Panthera tho.
@MinhTran-6j6ic same here, my 4070s inno3d x2 also 84 celcius by default when playing triple A games in mini itx case.
i followed your settings and it works same as yours
thank you so much
Thank you so much! With your tutorial I significantly decrease the coil whine and finally now I can just hear the noise from the fans. Awesome! Your are the best!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I wanted to congratulate you on this video, it was very detailed and furthered my understand on how to use MSI afterburner.
Awesome! Just the basic undervolt is amazing! Even the more aggressive settings, so far so good! Thanks! :D
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Thanks for this! Playing space marines 2 and from my comparisons I gained a couple frames (3-4 on average), my consumption went all the way down from 220+ down to 160-190 watts and the temperatures are at least 5 degrees lower. I'm very happy and you earned my like!
just undervolted my 4070 super gigabyte windforce oc. max temp is now 59-60c from 68-72c and gained few more fps as well. even with ray tracing/path tracing on and 100% gpu load the card is almost silent. very very happy with this card so far. upgraded from a 3070 standard (that was a good card also).
you have the dual fan version? or triple fan?
@@deepak_nigwal triple, always go triple
@@philiphansen1103 i fear the triple fan would fit in my tiny case, or not... the one i am looking is like way too long. also, dual fans are bigger than triple, have huge thick heat sink fins+consume less overall wattage, while compromising on fan noise. its a trade-off one way or the other.
What did you end up undervolting to? That’s the card I’m waiting to buy atm and I’m trying to see what people are setting for their afterburner settings
@@deepak_nigwal I have a dual fan version (MSI Ventus) since a bigger card won't fit in my small PC, but the first results (after undervolting) are very promising: about 37 degrees when idle and max 65 degrees under heavy load (100% GPU and ray tracing etc). Because the card runs relatively cool even my CPU is now 10% cooler.
Thank you very much, I've had a power consumption decrease of 50W in RDR2 and about 15 degrees (celsius) temperature decrease while having a more stable framerate. All that with your basic setup, so thanks that was easy :)
Very good video, thanks. I used this method for my KFA2 4070 Ti Super, now it draws around 35W less and the temperature is 5°C lower than before the undervolt. Good enough for me! Thanks again for the great tutorial sir.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
The best video tutorial about undervolting-Overclocking i have seen in centuries! thanks mate
I followed your guide for undervolting my 3070 with great success, and now for my new 4070s this guide is once again a big help! About 40W less consumption than my 3070, better performance and I still have to hit 70 degrees C even under heavy load!
This is soooooooooo perfect!
I got the Zotac one 2 fan and my presets that perfectly work are:
975mv at 2650MHZ with +500 on the memory
With these i was able to archieve MAX 80c playing Alan Wake 2 With RT at low.
You are the best!!! Thanks for all the tutotials!
It still too hot even after undervolt, so without undervolt it can reach 90c++ ??
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
same. zotac edge 4070S 2700Mhz 0.985V.
@@Pty101 also set a fan profile in msi afterburner for more agressive fan.
925mv at 2580 with +500 at memory
I undervolted my GPU using your guide and it was very concise and helpful. Instantly 5°C lower on average, with the GPU hotspot dropping 10°C, power draw is lower, and the fan speed dropped from 60% to 48% which is much better on the ears!
Do you have 4070 super asus dual?
i want to buy this for my 3d heavy pretty projects. i wonder if the temp is high or not? bcuz it fits my budget.
if it goes too high temp, i should wait 3 month to get a 3 fan.
@@user-fo9ce3hr5hI have a 4070 super Gigabyte Windforce OC, so it has three fans. It’s still worth a shot to undervolt and see how you like it.
Bros helping me out once again. Used this guys older video for my 3070. Used the 4090 one for my 4090 a while back. And now used this one for the 4070 pc i just built. All to reduce the horrible coil whine. Its so good at reducing the coil whine with no performance loss
Liked and subscribed. Went with 1v at 2880 core +1200 memory and my AI training workload is running stable at 73.1C max with 184.6W max power draw.
how's the stability of your GPU right now after 3 months of usage? what's your the GPU Memory temperature?
this is far the best undervolting tutorial.. Congrats !!
everything was super done exactly on the rtx 4070 super palit dual, the temperature was 77, it became 66 definitely like and subscribe.
Hey, I noticed that the undervolting method that you use for 4000 Series cards is different than the undervolting method you used for 3000 Series card (such as the 3070 undervolt video). What are the differences between the two methods? Is It safe to use this method even for other cards?
Because rtx 40 series is stubborn sometimes, i tried undervolt my 4070s with old method it doesn't work, after i hit apply it only work for few seconds but after that my gpu frequency and voltage increase above the undervolt preset
Very good point! RTX 4000 behaves differently when it comes to effective clock. The method used on RTX 3000 I deem a bit superior actually, because you have absolute stability on the lower end of the curve. But it would lose you clock on RTX 4000, so we can’t do it. But in the end, they’re basically the same really :)
@@ImWateringPSUsJust curious. Did you learn this from trial-and-error experiments? Or, is there a way to estimate the result depending on the architecture?
Just upgraded to a ASUS Dual EVO OC 4070S and your vid was just what I needed!
Electricity is getting out of hand here in EU.
Following these instructions with my Palit 4070 Super 2x I have crash problems in gaming with any undervolting preset, even the lightest.
I crashed Cyberpunk, A Plague Tale, and The Last of Us. Sometimes it runs fine for hours, other times it crashes after 10 minutes, so I went back to the factory voltage and turned on a custom cooling curve.
Привет бро, какая темпиратура была хотспота бо андервольта и после? Скажи пожалуйста то так и не понял
поверь, упадёт значительно)
Thanks for this guide. My 4070super MSI Ventus2x OC works perfectly on 0,95v 2700mHz core and memory +1600. Max temp was 66 degrees in Avatar:Frontires of Pandora on max settings, DLSS off, 1080p with average FPS 70-75 (FG off).
2640Mhz/900mV works (so far) :) thanks for the video. Fun to see that performance drop from 2750Mhz/975mV is minimal, less then 2,5% for -5% Mhz and -7-8% temperature.
Awesome video got me a 10% improvement on my 4070 super
What numbers did you go with?
@@camy252camy3 975mV and a 2750 core clock
I want to thank you; your advice helps me save 60W of electricity. At first, I considered buying an AMD GPU because it’s slightly cheaper and 10-15% more powerful, but it uses 100W more power. Even with undervolting, it matches the 4070's stock power usage. Choosing NVIDIA was an easy decision for me.
Not only do AMD GPU's consume much more power while gaming, they also sit at like 40 watts on idle on desktop, compared to the 5 watts of the 4070S
Friend, an important question that I remembered at this moment, you talk about efficient undervolt, and in performance, the graphics card doesn't heat up? What temperature does your GPU reach in performance? TKSSSS
There is no such thing as a 'preset' for undervolting, downclocking, or overclocking. It depends on your silicon quality aka silicon lottery.
First preset set me off by 65W and 5-6c degrees, really helpful, thank you.
Mate... you are a god!!! I had overheating issues with the new PNY 4070 Super hitting up to 90C.. it just went down to peak 70C!!! Unbelievable!!!
Is it a triple or dual gpu?
@@crad5476 I have dual fan 4070 super, and hitting 83C in games like cyberpunk and warhammer 3 total war.
@@tomislavkorman7417 my triple fan 4070S is at 70° absolute max in those games and 60° other games. That extra fan does wonders.
@@crad5476 yeah, probably. I just undervolted it and temperatures are lower 10-15C with same performance, so i am happy.
PNY 4070 super here also same issue, doing the first setup in this and it does not go above 70c
FINALLY I FOUND SOMEONE THAT EXPLAINS IT CLEARLY
The 2750 975 setting doesn't work for all apparently, my inno3d twin x2 4070 super crashes from time to time with it.
Same issue on my 4070S Inno3D Twin X2. Crashes in Manors Lords and EFT.
Have you found sweet spot for UV this GPU?
Good tutorial thank you very much, saved me the headache of googling for hours.
My Problem, as soon i hit apply after changing the curve the memory hu goes down to 5000 in msi afterburner
i got the same problem
Thanks a lot :) my gpu temps decreased a lot and fps quite improved
Only one question.. why setting mem clock to +1000? reasoning?
More fps
Thanks a lot, made 3 profiles, 2600 mhz 0.9 2750 0.975 and full clock at 1 volt. But really thanks for both the presets and the tutorial on how to find my sweet spot.
hey bro, i have an issue, i undervolted, created both profiles, but in the performance one, in game it goes from 2760MHZ to 2550, resulting in lowering the fps by like 15-20, also it lowers the voltage from 0.975 to 0.925, any idea what causes this? please give me an answer ive been looking all over the internet.... my card is PALIT 4070 SUPER DUAL OC
I can up my memory clock with +1000 or +1200 (saved and working) but when doing the voltage stuff (from 900 to 2550 or 950 to 2550 or 900 to 2450) my memory clock drops to 810 MHz? I am not sure what is going wrong….itbis a shame because the power dropped about 60w. Can someone please help me? I have a Asus RTX 4070S Dual and AMD Ryzen 9 7900 setup….
I got the very same card as yours, 4070s ventus 2x.
The question is, why after i copied ur curve i pressed apply, in afterburner im looking at 2500ish mhz when in your scenario it is 2745 (4:44)?
But during gaming IT IS 2745
Amazing tutorial, thank you very much! I have the same card 4070 super 2X Ventus, and it helped a lot.
I got 11% boost in fps for Cyberpunk 2077 (from 55,69fps to 60,71fps) on 1440p Ultrawide. Also consumption went from 212W to 191W and temperature went from 69°C to 67°C.
Hi thank you for the video. Was wondering why my memory clock switch back to 0 insta ? i have an asus 4070 super oc edetion (so factory oc) dunno if that is the problem.
Thanks for this! Gained more performance and lowered the temp by 9-10 celcius! :)
Thanks for showing this card, I have the exact card and like it but I have one issue. I can't adjust the fan speed to under 30%. it's either 0 or 30-100%. Is there a way to fix this or is it impossible due to the BIOS?
It’s a bios issue. You can technically flash the bios but I unfortunately wouldn’t really recommend it as it’s a little tricky to find and equivalent fan speed, unfortunately
@@ImWateringPSUs I have this same issue. Apparently, some Nvidia cards have set fan control limits where third party software can't set the fan speed below a specific %, most commonly 30%, preventing you from setting it to 0 rpm (idk why tho). I use Fan Control however to set my fan speeds which has a built in workaround for this
I had recently purchased a 4070ti S dual OC and was tired of the temps pushing higher and higher, I went with 2625mhz for the clock, and the temps are so much better, paired a 5900x It's great
Which differences in performance and other aspects are between the 900 mV and the 975 mV methods?
Its the gpu clocks that matter not the voltage. Having a lower voltage only potentially saves power consumption (watts)
I followed the steps for your underlcock, but for some reason my GPU clock keeps fluctuating down below 2500mhz, even at max power limit it floats around 2100mhz. If I lower the power limit to 100 (mine goes to 110 max) core mhz will float around 1600mhz. The lower my power limit goes the worse the FPS performance in benchmark is. I also noticed firestorm reports it still sitting at 925mv even though I set the curve to 900 in afterburner. My PSU is only 600 watts and powering my GPU on 1 rail, I'm wondering if that might be why?
probably. split it between 2 rails if possible, worked for me.
Update: turning the power limit all the way up plus a new 850w corsair power supply solved all of the issues I was seeing, including this one.
@@danielschmitt6622 Glad you got it sorted.
I’m really happy you got it fixed :)
4070S doesn't go below 925mv though?
And in the MSI curve, the lowest you can go to is 920mv because if you try 925mv, it will run at 935mv.
The same on FE model, when I set 900 it just runs at 925
Same here. The lower I could go on the voltage was 925-930mV no matter what :c
Thanks! On my Asus Dual 4070 Super EVO OC, 2750Mhz gpu @975mv and 12000Mhz (or +1500) memory seems stable.
What are your temperatures and are you still stable at these settings? Thanks in advance 👍
@@ronwladyka8127 I settled on 2730Mhz on the gpu and +1900Mhz on the vram and that has been 100% stable for a couple months now. I've seen as high as 75C when playing Star Wars Outlaws but it's usually right around 70C. I'm playing Indiana Jones today on ultra settings with full RT and it's at 68C while using 100% of the gpu.
Thanks brother you literally saved my GPU idk why but my gigabyte oc edition GPU at stock settings was running fans at 100% and showing no display underload but your settings saved my GPU can't thank you enough ❤
My 4070 super crashes on the efficiency preset if I'm gaming and watching youtube at the same time. Not sure if that's because of the undervolt or my in game settings but either way it's very annoying. Switching to the performance preset, hopfully that solves it.
mines does exactly the same, i think maybe it is because we have bumped up the curve before the undervolt?
Amigo, whats up with 4070ti? I bought one, im happy with temps on stock, but my afterburner saved settings after startup are little changed (afterburner by itself adds a little more voltage, curve is modified), every restart A LITTLE different values), the same with ex 3090 card. Someone said - save settings on full GPU load (like unigine or other program), but anyway afterburner changes A LITTLE that voltage/frequency curve 😢
PS, im holding Shift, then pressing 2x Enter when i set voltage/freqv., it flats curve 😊, mby thats the reason?
lets go !!
best content as always ma man !
My zotac twin edge oc 12gb very stable 975mv at 2805Mhz with +1600 memory clock.
3dmark port royal stress test 50 loop smooth like butter,CP 2077 max setting with path tracing no crash .
-20w than stock ,+ 10% fps performance ,and 71-76c temp.
Thanks mate !!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :)
@@ImWateringPSUs of course ill always support you ma man,keep up the good work !! DONT FORGET TO SENT ME SOME 4090 LOL
Many thanks to you. I was able to get a stable 2820mhz at 1,000mv and +2000 on memory clock. I have the exact same card as you show in the video. I think I actually set it in the curve to 2822mhz, but in Cyberpunk it'll start at 2835mhz and after a few seconds drop to 2820mhz and stay there.
that is because the Nvidia card changes the frequency in 15MHz steps
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Thanks so much! Got a little over 12k on memory and 2900mhz on core without higher temps ure the goat!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Ciao, ho una ghost 4070 s ho provato ad impostare 80% power limit e 250 mhz sul core, tutto benissimo, dopo un po’ è crashato. Hai consigli da darmi? Sono poco pratico! Grazie
Sadly this didn't yield the same results for me on my Asus TUF 4070 Super. 2.97% uplift in performance. Not sure if I did something wrong because your Afterburner shows a static 2745MHz but mine changes and doesn't go above 2520MHz despite applying the curve editor to 2751. I checked on the Timespy results and it's showing at 2730 so I think it worked..
Timespy 1440p with standard GPU - 20794
Timespy 1440p with performance uplift - 21413
My card out the box is reaching 2820 on the core clock already. That mean it's factory OC and I shouldn't bother trying any higher?
is the memory overclock necessary? If you didn't do that, wouldn't that leave some headroom to push the undervolt even further?
This is the best undervolt video i have ever seen.
Ahahahah I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Thanks for this video. I suck at this kind of thing and this video is very simple and easy to follow. Easy subscribe
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback and really thanks a LOT for the sub
hey, how much % better performance it gave? i ordered non OC 4070super model so probably would be nice to undervolt/overclock or something a bit ^^
I just wonder. Why do fabrics tune voltage as it is, if lower volts make their GPU-s work better?
Hi, I have your used your guide with great success on my 3060 Ti before but when im trying to undervolt my 4070 Super my memory is going from 11500 down to 5000 and then up again. Only occurs when Im trying to undervolt it. Have tried both 900mv and 925mv but it still happens. Do you know what it can be?
Hello friend, how are you? I have the 4070super ZOTAC dual fan, I did the efficiency procedure, it dropped 8C° before 74 now 67/68, fan curve do you recommend? Would it be interesting not to do the UNDERVOLT but rather the fan curve? Thanks for the help.
I’m glad I could help :) Undervolting is the most important thing but I also have a GPU fan curve tutorial on the channel :)
@ImWateringPSUs ok I'll watch. thanks
if im on a 1080p monitor display should i still run benchmark @ 1440p?
No ofc not that doesnt work
Hello friend, I would like to thank you directly from Brazil. This is a hot country and I was getting 75 degrees 100% on a 4070 super galaxy, It's still cold by his standards. but I chose to have a more comfortable temperature. with its profile it is a maximum of 68 degrees and 80 hotspot. thanks!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Mano aonde que ver o Hotspot dessa placa?
Dude this is awesome! mines performing better while using way less power and not running hot. Thank you good sir.
Im trying to use the curve, but my gpu mhz is stuck at 2505?
So simple and informative!!! Thank you
Hey I have the same GPU as you and just applied the same exact settings thank you! I have been noticing some dips in performance and the computers cursor slowing down any trouble shooting tips you recommend?
I’d say make sure it’s stable! 50Mhz less on core clock and 200Mhz less on the memory generally will work :)
@@ImWateringPSUs returned it for a 4080 super lolz
Con le prime impostazioni quando si rinfresca la gpu? E inoltre su benchmark la qualità va messo in 1440p anche si gioca in full hd?
Wtf you life saver i have a new build, my RTX 4070 super was getting upto 84c with a bit of coil whine was loud as hell now it wont go above 70c THANKS!
please tell me is this card good for render 3d works? bcuz it has 2 fan i scare of temperature but it has good price.
Hey, I have tried your presets on my 4070S windforce oc but it crashes. It crashes even at 2600… can u help me ?
i get stuck on 5001MHz on Memory after UV, someone know if thats normal?
ehi man what is the temp limit? why you tried to push it from 84 to 88? it gives more boost?
I hate that everytime I search for undervolt GPU i fond you because you never show power usage GPU (watt) in your video then how tf we know that Undervolt actually work?
With the first setting from the video my 2F Asus dropped from 220 to about 120-150 watts
@@kamilb.3525 Thank you, I need that info for sffpc
I get only half MEM: 5001 Mhz with the undervolt? With a ASUS 4070 S OC DUAL
Ciao. Scusa ma non ho ben capito i risultati dei settaggi fatti. Dato che mi pare che tu sia italiano, potresti sintetizzarli per iscritto? Grazie mille
Bruh, I VERY rarely leave a comment on youtube but this was so simple to follow & worked perfectly for my ASUS 4070 Super Dual OC GPU. I'm using your preset 2 and it's only about 50hz lower than my GPU was boosting to on stock settings while running 8-15c cooler & my power usage under load went from like 212w to roughly 160w... almost a 25% decrease in power usage!! Even my Hotspot temp dropped a decent amount :) Thanks a bunch for this, dunno if you'll see this since 4 month old video but wanted to let you know its still helping peeps! Cheers, liked n sub'd
Edit - Forgot to mention it brought my 3DMARK TimeSpy score up 19803 from 19339 & my Steel Nomad score up to 4969 from 4608
Hey, I just got this GPU and I’m about to undervolt it. How has the undervolt held up and what’s your boost score? I have an Asus 4070 super dual OC Evo. I’m not sure what the differences between the evo and non-evo.
@@kkmcgamercheck if you have 110% fan power limit option in MSI Afterburn - I have nonEvo and have it
@@kkmcgamerI also have Asus 4070 Super Dual Evo and it's the worst card I ever had. Hot, loud, only 2670mhz boosting... The case is Lian li lancool 216 with bottom and external fans mounted. The airflow is no problem at all.
@@Prorayque it’s such a garbage cooler, i thought it was the same like the regular dual but it’s so much worse. Without my undervolt it will probably be at like 70-75c with the fans screaming at 2000-2300 rpm. I honestly might try and complain to Asus and try and fight for a replacement regular duo version because there is no mention anywhere that the coolers are this different. I’m also using a msi mpg gungnir 300r airflow and airflow is definitely not a problem, I even added 2 intake fans below the gpu and they barely made a difference. Did you end up returning the card?
@@kkmcgamerI also noticed that the bottom fans (140mm Arctic Cooling P14 Pwm PST) as intake didn't make a difference, maybe 1-2c and I find that quite disappointing. Not sure what I'm going to do, probably gonna sell it and than buy a triple fan card. Gaming X, Asus Prime, Tuf gaming, etc. Dual fan never again.
Extremely helpful, thank you!
That was really usefull. Thank you bro!
I was able to get my Asus Dual to 2740Mhz at 950mv and memory +1000. Power draw has dropped from 220w to about 188w and temps from 72c to 66c.
same, works fine
Ciao, sto provando a seguire il tuo tutorial… tuttavia non sembrerebbe apportare alcuna modifica alla mia 4070s… consigli? in più quando apro alcuni giochi c’è un forte rumore dovuto al Coil Whine… consigli anche per questo?
Che custom hai?
@@iltipotech4872ho una ventus x3
Assicurati che non sia l'alimentatore
Bought gigabyte windforce version of SUPER. I will be using your tutorial as a guideline and in the coming days I'm gonna find out my sweet spot. But I can already tell I will use 2 presets, one for just windows/movies and other when Im gaming. See where I can land. I also think that for this kind of work, you need to have a decent PSU, so I bought a '(good one I hope) on top of the card.
You dont need a good PSU. I have a 600 watt PSU with like 84% efficiency and its all running just fine.
Hey bro, one question, shouldn't be opposite when you undervolt gpu(decreasing performace but also temp and voltage) im reading in comments that people got better performance while still using ultra settings
When you undervolt a card, you are not decreasing performance. You decrease voltage, at the risk of stability. Cards at stock setting usually hit power limit first, because the curve is set to run ALL OF THE CARDS of the same model with ABSOLUTE stability, they can't risk crashes with lower quality silicon, so the Frequency-Voltage curve is set a little higher, than the cards actually need.
With lower voltage, you reach that power limit later, with higher clocks.
So really you just tweaking efficiency. With a more efficient setting, you get more performance from the same power budget.
For some reason my GPU is still taking about 220w according to furmark2 when using your first preset.
power usage is different with the volt we are doing so it's ok since we unlock 100% power usage
hey, i was wondering if it was normal that my 4070 super is doing +2000mhz on memory clock with no problems at 975mv? is an asus dual model.
You’re lucky then
I used the efficiency preset on my 4070 Super Twin Edge but it will not stay at 900mv, it insists on staying at 925mv. Even if I use 875mv, it still runs at 925 mv
Different card, same issue. In my case the mem clock goes down to 810Mhz and won't come up too.
@@nedamdam I found out 925mv is actually the lowest that Ada cards will go
@@miguelaraneta3144 Thank you for the info. Still I see it without load happy at 0.860V. However load 0.925V. The only thing the curve thing UV does, is limit my max Clock, but not the Voltage ...Genuinely how did he get 900mV ...
so if set to performance at 975mV and 2850 mhz speed, how much power should be drawn by the gpu? 220W or less? Please help me anyone who can
thanks so much. I achieved 2760MHz 975mV on the core and +1500MHz on the memory (pny dual verto)
Thank you. I have one queation. Should i put switch on the card to Quite or Performance ?
The switch only changes the fan curve. Quiet is fine.
Sometimes it gives you a little extra power limit percentage, I’d put it to performance just in case!
Mine rtx 4070 is 1.1 2760 stock. If i add 225 on clock and stop the curve at 2760, i get 160w but i lose 5, 10% performance at the same clock. Why?
My 4070 super is 0.925 2670 mhz, or 0.985 2850 Mhz. If you set the clock too high, potentially it's not hitting the target Mhz, because power limit, thermal limit, or gpu incapable to go that high on that specific voltage point. Set higher voltage potentially if you want to set the gpu that much higher. Or set lower so you save power and stays below the power limit.
Is it zotac ?
msi 2x 4070 super, 2700clock .975 and 58-60c stable in Stalker 2. i get lower temps in COD thanks.
Finalmente qualcuno che ha fatto un tutorial semplice senza troppe informazioni inutili! Ti consiglio solo, dato che fai un video in inglese, di usare la lingua inglese anche nei menù di Afterburner.
Grazie mille! Hai ragione sulla lingua :) Iscriviti se ti è stato utile e vuoi supportarmi!
Thanks !!!! Clear, simple, and very helpfull
it's very clear as I push close to the voltage limit, I need more and more power to gain fewer and fewer mhz. On Ada GPUs UnderVolting is much smarter especially in an ITX case which most 4070s suits😂.
Doesn’t work with Msi 4070 supers too boost clock? does it only memory boost?
My 4070 super FE is stable at 975/2800 and 1600MHz Memory clock should i even bother going higher on the mem clock? temps down 10°c and power draw is down 50w, thank you for this video.
Honestly it’s very good already, I’d leave it like that! I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
@@ImWateringPSUs I'm already subbed bro, you make great content, I decided to just see how far I could push it and my card is stable at 2000mhz mem clock haha.