My toro I changed carb out and worked fine for about 20 minutes then had soo much trouble starting and keep it running . Could ba bad gas or what ? Spark plug I dropped and may have damaged the gap .?
I would recommend thoroughly cleaning the carburetor in an ultrasonic cleaner, and putting a new gasket and diaphragm kit in it. Nine times out of 10 that fixes all carburetor problems on small engines
@@kingbeav8386 have you tried adjusting the high and low mixture screws? Sometimes they are hidden or covered with plastic limiter caps (which can be melted off carefully)
Yep thanks for the tip I actually figured that out not too long ago and ended up doing that today. If they're still difficulty I use two stroke oil as a lubricant
Lol sorry :-) I love repairing stuff but I am not a big cinematographer. Plus, my GoPro camera is a total piece of garbage. I lose footage all the time.
You did not show an important part, installing the fuel lines into the fuel tank. There’s a special procedure we use for fast insertion. Let me suggest you watch a few pro video guys then try this again. It was pretty bad. Sorry
No carb adj screws
I was not sure how my fuel line was routed when replacing the carb on my Toro Trimmer. This helped a lot.
My toro I changed carb out and worked fine for about 20 minutes then had soo much trouble starting and keep it running . Could ba bad gas or what ? Spark plug I dropped and may have damaged the gap .?
Great vid. But for some reason mines is still having trouble cranking and still running rough idle
I would recommend thoroughly cleaning the carburetor in an ultrasonic cleaner, and putting a new gasket and diaphragm kit in it. Nine times out of 10 that fixes all carburetor problems on small engines
@@JoesGarageProductionsLLC that’s with a brand new carb, fuel lines and primer bulb
@@kingbeav8386 does it accelerate okay and maintain high RPMs?
@@JoesGarageProductionsLLC somewhat. Kind of sounds like it’s bogging down a tad at some points.
@@kingbeav8386 have you tried adjusting the high and low mixture screws? Sometimes they are hidden or covered with plastic limiter caps (which can be melted off carefully)
Just did mine and it runs good thanks for video!
Great vid. Straight and to the point. If you are even slightly mechanically inclined this video is more than enough to get it done. Thanks
Yup, totally agreed.
I guess if you had no clue on how to replace a fuel line you’d like this. I run a lawn repair shop this video was a terrible tutorial.
Trimmer marca toro Cómo se saca el cover de al frente del carburador el plástico Quiero ver únicamente eso gracias
If you're going to do a post on how to replace fuel lines go step-by-step don't cut out a step.
th-cam.com/video/3hYoo775X8U/w-d-xo.html
Thank you bro. Same exact thing happened to me and my toro. Thank you for the info & know how.
Can i get the link to buy this plz
TREMENDOUS ,good job.
Hold still
Can you provide us with a link for that kit you bought?
If you have difficulty pushing the fuel lines into the tank cut the leading edge on a taper.
Yep thanks for the tip I actually figured that out not too long ago and ended up doing that today. If they're still difficulty I use two stroke oil as a lubricant
Appreciate the Post. Had to take some advil due to my head shakin watchin this.
Lol sorry :-) I love repairing stuff but I am not a big cinematographer. Plus, my GoPro camera is a total piece of garbage. I lose footage all the time.
We know that you know how to put everything together , you leave to mutch to guess work.for others to understand, as to placement of fuel lines,
It not called Chinese knocked off/it called reverse engineering ahhhh😪😭😭😭😭
.YOU MOVE THE CAMERA SO MUCH IS IMPOSSIBLE TO SEE WHAT YOU DOING.... REPEAT ALL PROGRAM AND DO IT ON A TRIPOD,.. YOUR EXPLANATION IS NOT BAD.
You did not show an important part, installing the fuel lines into the fuel tank. There’s a special procedure we use for fast insertion. Let me suggest you watch a few pro video guys then try this again. It was pretty bad. Sorry
get a damn tripod
@@jeffglueckert8784 poor baby, hurt your feelings
if you were to properly clip this video it would be 1 minute long.