@@MrNiceGuy94 where abouts are you based? I have a Mazda 6 needing walnut blast, I stay in Scotland, willing to travel as there is know body up here wanting to do the job!
@@richkennedy13 Lingfield, Surrey. Message me on facebook, same username and profile pic as on here. Also link for it in the description of the newer vids.
@@MrNiceGuy94 I was told by Mazda Australia to run 10W 40W in the 2.2 litre diesel engine in the sky active model, apparently there was a washer tolerance issue in the early engines fitted to the Mazda CX series Mazda 6 diesel, and to only ever use Castrol Magnatec, because the cam lobes on the early Mazda diesel engines had premature wear issues and Castrol Magnatec protects engines on startup from wear and that when the cam lobes wear. I was told not to run the specified 5W 30W grade. The washer issue is easily rectified by changing out the washers on the cylinder head but a worn camshaft is an entirely different proposition that costs a major amount of money. I was also told by a mechanic that some of the Mazda's made in Mexico are problematic as opposed to the ones made in Hiroshima Japan which are bulletproof units. The issue with the EGR valve is rectified by using an EGR blank plate and delete, my Mazda 6 is only driven on country roads max speed 100 kilometres per hour so I've never had DPF issues or carbon build up in the intake manifold. The main reasons why Mazda went for 5W 30W was to increase fuel economy the only problem is that it can lead to premature engine wear and the thinner viscosity oil doesn't translate to any real noticeable difference in fuel economy, I drive to Darwin from Adelaide on just a few tankfuls of diesel a distance of 3100 kilometres
You should get atleast a million subscribers by now...excellent informative video mate.. Don't stop...carry on what you doing and let's everyone know what these STEALERS do. I too a mechanic. ...hats off..
great job, well done I like mazda, I drive 323F 2.0 DITD andit runs good. But with these modern mazda diesel engines I am dissapointed. So much trouble
Great content! I have just cleaned the intake of my Mazda 3 2014 plate, 180.000 km wasn't so bad. The results were good, having in mind I did manually. It started at the first attempt and now is running smoothly. Thanks to your videos I had the guts to do it. Question now how would check the wear on the exhaust camshaft without distmantling anything?
Thank you very much buddy for your generousity! ;) Unfortunately the only way is to remove the valve cover, because even tho you stick down a borescope into the oil fill hole, you still won't be able to see the exhaust camshaft as the oil shower is sitting on top of it and covering it. However, if you have done the carbon cleaning on your own based on my videos, the valve cover removal should be easy for you too. What you be mindful of if the injectors are not coming out with a gentle push from a prybar then don't force it as you may crack the valve cover. Then you will need to fabricate a similar tool that I did ;)
These are the type of channels authorized garages and dealerships hate but we love. Thanks buddy. amazing in depth. I've just had a P258b error come up on my mind and I was told it was a vacuum pump error but the vacuum pump seems to be working fine. Any tips?
It will be the vacuum pump and/or worn exhaust camhsaft. Do you have a scan tool? If so,check in the live data the brake booster pressure sensor values. If it doesn't go back to 7.6kpa then the vacuum pump needs to be replaced. Usually if you have codes for it then it is faulty.
I cant get over the $9500(AUS) for a de-carbon etc, those dealer mechanics are only interested in oil changes for a premium price. You should definitely tell the customer what needs attention. Even a snapped fan belt can have them stranded, with a expensive tow. Keep these 2.2d soot machine vids coming !
Excellent video, thanks for content, I plan to do this on my 2014 2.2 diesel ( will borescope inspect through the inlet sensor first ) question could I block the EGR tube at a gasket joint ? seen it done on a Landrover video.
Anything you block, delete or bypass will require a remap. There will be remap guys everywhere int he country. I deleted my dpf and have my 6 tourer at a stage 2 remap now. Edit: 2013 6 tourer 2.2 skyactiv diesel- biggest con in car history these diesel engines and dp filters with the egr that are designed to fail at 150K on the odo.
You are an expert now on the 2.2 skyactiv diesel shitboxes, tell me I had one that had done 17500 from new over 4 years, now I know that's a very low mileage for a diesel over 4 years, I've since sold it, but it was doing regens every 30/40 miles, is that bad?
Hello mate Where are you located and how much do you charge to do this work? I have a 2016 CX5. The previous owner did this once but I don't know if it's time to do it again. I want to replace the timing chain. I await your response. Thank you.
Nice video, Thanks. Dirty, Horrible job - and I know because I've done a few myself. (busy on two at the moment).. I wanted to ask how the Inlet manifold ended up after the different fluids you tried? I've also had very limited success with ultrasonic cleaners...
Great video, just did the job on my car. Would not start after reassambling, sounds like no compression. You say it must build up new compression after this job, why is that? Guess this is the reason it won`t start. Guess I must crank it some more then..
I have CX5 Fault P2262, Cleaned already everything and changed the sensors but nothing worked. Turbo seems fine to me. Its also telling me dpf fault. Do you have a guess what is the problem ? Thank you for every video! 🙏🏼
Which sensors did you change? Did you clean the pipe underneath the exhaust pressure sensor? What is the reading of the EPS at idle? Did you visually check the wastegate flap on the small turbo? What is the fault code for the DPF?
I would like to thank you for your video. I changed the exhaust pressure sensor, the intake pipe pressure sensor, and the brake light switch. Despite all these replacements, I still get the SBS/SCBS malfunction warning when I'm on the highway and when I decelerate. Could it be a dirty throttle body? The only error code I get is P0101, and I also have the following codes on the dashboard: U0401, U0415, U0433. Do you have any advice on what to check next?. Your video serves as a "manual" showing how we can do it ourselves. Once again, thank you!
Very nice video. I have a short question about the intercooler. Noticed on this Mazda the pipes are quite full of gunk. Isn't this a result of the turbo pushing some oil in? As the carbon clogs the oil drain line from the turbo, oil starts slowly seeping through the bearing and in the compression fans. Therefore, do you also remove the turbo and clean it and/or replace the bearing or potentialy rotating shaft?
Fab reference video watched a few times..I aim to reppace and check my egr cooler ASAP..seems straight forward . I spoke to mazda tech when picking up my coolant bypass .. 1 question if I may ..how awkward do you think it wouod be to swap out the bypass with intake on ?. My car had intake clean under 2 years ago ..he suggested strongly its my egr cooler given what I told him I've had done etc ..I'd like to swap the bypass out same time as they commonly fail ..let me know if you will Thank you great work ill keep you posted
Thanks a lot for a great video. Would polishing the exhaust-channels prevent carbon deposits? Or another treatment to make it runs longer without problems again?
My Mazda 2.2 d 2013 has a power delay on low RPM when I push pedal to the bodem react after 2 seconds what it can be please help me I visited the garage many Times they didn't know What is the problem thanks a lot
Hi, I’m very impressed with your work, I have the same car,64 plate 120,000 miles too. Would I be able to bring my car to u to get this done too please. Want to keep my car, love the way it drives. . How much do I charge for all this, thanks
Hi I’m based in Fiji….my car cx5 vibrates at 1200 rpm…anything up or down rpm it’s fine….its happens in all gears if on hill or very smooth road…Mechanics can not tell it’s gear box or what few tell me it’s gearbox and few injections….its awd diesel 2.2l
Nice Video :D Only thing I can suggest is, when you're doing that test for the Vacuum pump, let the Fast idle [Injector Cleaning Procedure] finish when you first start the car. Pump the brake and check the reading once the Fast Idle [1800rpm] comes down to normal idle speed. It will definitely effect how long it'll take for Vacuum pump to reach that >10 value. Also with regards to that Exhaust Pressure sensor pipe, I understand it's blocked, but do you HAVE TO replace it? Can't you clean it? Maybe soak it in some cleaning agent to soften the sooth and put it through your Ultra Sonic Cleaner and/or use an air gun and blow it out?
Thanks for the insights. You are correct. I already knew that the vacuum pump is good on this one, I just wanted to show how to test it. But yes, you should wait till the idle settles. You can clean the pipe I guess, but the owner decided to get a brand new one as it was causing him a lot of headache and also didn't want to risk it again having issues. I kept the pipe, I may clean it if I will have time and test it for blockage.
About the brake booster pressure sensor, I noticed my brake pedal getting harder to press and looking at OBD live data it doesn't move much at all (always around 10-20kPa) when heavily pressing the brake pedal. What should I suspect? Worn exhaust camshaft + bad vacuum pump, other than the sensor itself? Mine is a 2014 Mazda3. Thank you
Amazing amount of carbon given the mileage. Are all of the diesel skyactive engines prone to this? I have a 2017 cx5 that is only used on motorways but I am sure going to take a look. Thanks
Fabulous video, well done. I feel your channel would help me a lot with my CX-5 2.2 Diesel. Also, I need some help... I can not find anywhere videos on how to change my thermostat, water pump as the only ones are for the 2.5L engines... Maybe you can help me with that? Much appreciated!
I have a CX 5- 2017 automatic. It sort of went into a limp mode after driving for an hour on the motorway- The traction control system sign, smart brake system light, and electric parking brake light came on. Stopped and restarted and everything was back to normal. Can the carbon build up cause any of this?
P0401 but it is quite rare that it throws that fault code, if it does, there is no doubt, it is the carbon buildup. But let's say if you have less then 45MPG average you need the carb cleaning.
@@MrNiceGuy94 Many thanks. In a country where it was legal to delete the DPF would you expect the carbon build up to be less? Are there any additives or detergents that would help to reduce the build up? Is it worth buying supreme type diesel fuels rather than supermarket diesel?
I would tend to to replace all gaskets and seals I come across, its quite a long job to dismantle, so if a joint blows after you have done the job then its going to be the most awkward one. I would also grease all threads with a smear of copperslip. I salute you on your replacing nuts and screws back and covering any openings which objects might drop eg, air pipes, also as you found out it is easier to remove the coolant header tank and struggle and mess around catching the coolant in bottles. It would seem the way people are taught these days is to take minimum amount off but struggle with the chance of damaging. something. If you don't have an ultrasonic cleaner, then soaking in a strong solution of soap and hot water will do the job, but best left overnight. Like he has done clean the worst off mechanically. The EGR valve looks like you can remove the electrical operator then soak the valve end. Well done and a good job.
I completely agree with you. However as I do these cleanings quite often(8 a month roughly). From experience I can tell that the gaskets are fine, I am talking about the metal ones, if there are rubber seals anywhere I replace them no matter what as they can degrade over time. Also I test drive the cars and check them which I have fixed and if there is any issue after that I fix it ;) Also, all of these gaskets are ridiculiously expensive to replace, obviously if the client wants it I don't have any problem with it ;) For me as I do these quite often the removal and reassembling is the least time consuming job, the walnut blasting is a lot more involving.
Thats a crazy amount of buildup i sure hope my engine doesnt look like that. I also have the code p2262 but my preassure is 200+ on idle instead of ~100kpa. What do you think causes this?
Has anyone ever had a problem free experience with one of these engines? We hear so many stories of how bad they are, but does every single one of them experience issues?
What a job that was, well done! What is the number one cause of all this carbon build up? Is it solely the injector washers leaking, or something else also (incomplete DPF regeneration)? What mileage had the car done? Edit: Appears to be around 110k miles on the clock towards the end of the video?
This car had around 120k I believe. The cause is the EGR system and the engine being direct injection, so the carbon residue and soot can build up inside the EGR parts, intake manifold and intake ports. Unfortunately all direct injection engines have these issues more or less. The skyactiv is extremely bad on that side.
Really useful, but I'm still not confident to do my own. Anybody out there doing this professionally? I'm in Gloucestershire UK and have a Mazda6 2,2 Diesel that needs a good engine de-carbon.
Is there anyway to delete this abomination of system?!I am pulling a head for a friend tomorrow and i not looking forward to it,it makes euro cars look good !
Get an EGR blank plate and delete. Run the 10W 40W Castrol Magnatec not the BS 5W 30W grade BTW if you run a thinner viscosity oil they break down faster and you end up with damaged camshaft especially on the exhaust, i was told by an engine engineer, that car manufacturers do it to get better mileage per gallon at the expense of the engine especially if some knuckle head drives around with a bung thermostat it will cause an already thin viscosity oil to get even thinner because an overheating engine thins engine oil which translates to very fast engine wear! The same guy then cracks and warps his head and cracks his block or stuffs his head gasket. You can fix using a copper sealer so dont remove your head unless you have your wallet ready or you are an ignorant knuckle head! Thinner oils only give you almost no extra economy and they wear the engine faster, especially if their are no PTFE particles in your oil like Slick 50 or Castrol Magnatec,my advice is to change thermostat every 5 years cheap insurance and change water pump and coolant at the same time, change serpentine belt at the same time, your timing chain is ok if you change your oil regularly
Thank you for compiling such a great, detailed and thorough video. Your efforts will go to help so many other owners.
I am glad, that's the reason I am making these videos.
@@MrNiceGuy94 where abouts are you based? I have a Mazda 6 needing walnut blast, I stay in Scotland, willing to travel as there is know body up here wanting to do the job!
@@richkennedy13 Lingfield, Surrey.
Message me on facebook, same username and profile pic as on here. Also link for it in the description of the newer vids.
@@MrNiceGuy94 I was told by Mazda Australia to run 10W 40W in the 2.2 litre diesel engine in the sky active model, apparently there was a washer tolerance issue in the early engines fitted to the Mazda CX series Mazda 6 diesel, and to only ever use Castrol Magnatec, because the cam lobes on the early Mazda diesel engines had premature wear issues and Castrol Magnatec protects engines on startup from wear and that when the cam lobes wear. I was told not to run the specified 5W 30W grade. The washer issue is easily rectified by changing out the washers on the cylinder head but a worn camshaft is an entirely different proposition that costs a major amount of money. I was also told by a mechanic that some of the Mazda's made in Mexico are problematic as opposed to the ones made in Hiroshima Japan which are bulletproof units. The issue with the EGR valve is rectified by using an EGR blank plate and delete, my Mazda 6 is only driven on country roads max speed 100 kilometres per hour so I've never had DPF issues or carbon build up in the intake manifold. The main reasons why Mazda went for 5W 30W was to increase fuel economy the only problem is that it can lead to premature engine wear and the thinner viscosity oil doesn't translate to any real noticeable difference in fuel economy, I drive to Darwin from Adelaide on just a few tankfuls of diesel a distance of 3100 kilometres
You should get atleast a million subscribers by now...excellent informative video mate..
Don't stop...carry on what you doing and let's everyone know what these STEALERS do.
I too a mechanic. ...hats off..
One of the best videos I have seen on TH-cam!
Díky!
aj ja dakujem ;)
Köszönjük!
Incredible job . Extremely impressive work 😊
great job, well done
I like mazda, I drive 323F 2.0 DITD andit runs good. But with these modern mazda diesel engines I am dissapointed. So much trouble
Thanks!
Hi MrNiceGuy, nice comprehensive initial assessment. Well done mate 💪💪
Peter, thanks for tuning in! I appreciate your nice words. I really hope we can have a pint together one day ;)
@@MrNiceGuy94 we will, I look forward to it too 🍻🍻
Great content! I have just cleaned the intake of my Mazda 3 2014 plate, 180.000 km wasn't so bad. The results were good, having in mind I did manually. It started at the first attempt and now is running smoothly. Thanks to your videos I had the guts to do it. Question now how would check the wear on the exhaust camshaft without distmantling anything?
Thank you very much buddy for your generousity! ;)
Unfortunately the only way is to remove the valve cover, because even tho you stick down a borescope into the oil fill hole, you still won't be able to see the exhaust camshaft as the oil shower is sitting on top of it and covering it.
However, if you have done the carbon cleaning on your own based on my videos, the valve cover removal should be easy for you too.
What you be mindful of if the injectors are not coming out with a gentle push from a prybar then don't force it as you may crack the valve cover. Then you will need to fabricate a similar tool that I did ;)
Great video! I'm about to get round to doing this on my cx5. All your videos on them have been really helpful.
Great to hear!
Yours leaking ?
These are the type of channels authorized garages and dealerships hate but we love. Thanks buddy. amazing in depth.
I've just had a P258b error come up on my mind and I was told it was a vacuum pump error but the vacuum pump seems to be working fine. Any tips?
It will be the vacuum pump and/or worn exhaust camhsaft.
Do you have a scan tool?
If so,check in the live data the brake booster pressure sensor values. If it doesn't go back to 7.6kpa then the vacuum pump needs to be replaced. Usually if you have codes for it then it is faulty.
@@MrNiceGuy94 Bought a Veeapeak to scan the car. I'm not sure if it does live read. If it does, I can check this tonight. Thanks a bunch!
Also check with mazda there were recalls i had mine done for free @sertaliozer1
Hopefully see you Saturday. Thanks for all these amazing videos.
Excellent clear instructions!!!!!
Glad it was helpful!
I cant get over the $9500(AUS) for a de-carbon etc, those dealer mechanics are only interested in oil changes for a premium price.
You should definitely tell the customer what needs attention. Even a snapped fan belt can have them stranded, with a expensive tow.
Keep these 2.2d soot machine vids coming !
A - because it's the right thing to do. 👍👍
Excellent video, thanks for content, I plan to do this on my 2014 2.2 diesel ( will borescope inspect through the inlet sensor first ) question could I block the EGR tube at a gasket joint ? seen it done on a Landrover video.
It should help, but also the ECU will need to be altered too.
Anything you block, delete or bypass will require a remap. There will be remap guys everywhere int he country. I deleted my dpf and have my 6 tourer at a stage 2 remap now.
Edit: 2013 6 tourer 2.2 skyactiv diesel- biggest con in car history these diesel engines and dp filters with the egr that are designed to fail at 150K on the odo.
How much did you charge?
Very good video. What do you sugest to prevent the cleaning job? Some fluid spry every x km ect...thanks
Can't prevent it, but after this cleaning you can use chemical carb cleaning every year to clean it off again.
@@MrNiceGuy94through the intake ?
You are an expert now on the 2.2 skyactiv diesel shitboxes, tell me I had one that had done 17500 from new over 4 years, now I know that's a very low mileage for a diesel over 4 years, I've since sold it, but it was doing regens every 30/40 miles, is that bad?
Hi great videos and content I’m just doing my first one, could I ask what code reader you use, Thanks
Hi yes you have there 2 egr valves 1 is for hot directly from hed and the second is cold with the cooler inline.
Hello mate Where are you located and how much do you charge to do this work? I have a 2016 CX5. The previous owner did this once but I don't know if it's time to do it again. I want to replace the timing chain. I await your response. Thank you.
Nice video, Thanks. Dirty, Horrible job - and I know because I've done a few myself. (busy on two at the moment).. I wanted to ask how the Inlet manifold ended up after the different fluids you tried? I've also had very limited success with ultrasonic cleaners...
Great video, just did the job on my car. Would not start after reassambling, sounds like no compression. You say it must build up new compression after this job, why is that? Guess this is the reason it won`t start. Guess I must crank it some more then..
I'd use some easy start to aid starting ..compression comes from.pistons so not compression issue
I have CX5 Fault P2262,
Cleaned already everything and changed the sensors but nothing worked.
Turbo seems fine to me.
Its also telling me dpf fault.
Do you have a guess what is the problem ?
Thank you for every video! 🙏🏼
Which sensors did you change?
Did you clean the pipe underneath the exhaust pressure sensor?
What is the reading of the EPS at idle?
Did you visually check the wastegate flap on the small turbo?
What is the fault code for the DPF?
How much would you charge for this job ?
I would like to thank you for your video. I changed the exhaust pressure sensor, the intake pipe pressure sensor, and the brake light switch. Despite all these replacements, I still get the SBS/SCBS malfunction warning when I'm on the highway and when I decelerate. Could it be a dirty throttle body? The only error code I get is P0101, and I also have the following codes on the dashboard: U0401, U0415, U0433. Do you have any advice on what to check next?. Your video serves as a "manual" showing how we can do it ourselves. Once again, thank you!
Very nice video. I have a short question about the intercooler. Noticed on this Mazda the pipes are quite full of gunk. Isn't this a result of the turbo pushing some oil in? As the carbon clogs the oil drain line from the turbo, oil starts slowly seeping through the bearing and in the compression fans. Therefore, do you also remove the turbo and clean it and/or replace the bearing or potentialy rotating shaft?
Fab reference video watched a few times..I aim to reppace and check my egr cooler ASAP..seems straight forward . I spoke to mazda tech when picking up my coolant bypass ..
1 question if I may ..how awkward do you think it wouod be to swap out the bypass with intake on ?. My car had intake clean under 2 years ago ..he suggested strongly its my egr cooler given what I told him I've had done etc ..I'd like to swap the bypass out same time as they commonly fail ..let me know if you will
Thank you great work ill keep you posted
What torque do you do the bolt on the top of the injector?
Thanks a lot for a great video. Would polishing the exhaust-channels prevent carbon deposits? Or another treatment to make it runs longer without problems again?
The problem is in the intake ports. Unfortunatelly there is no other solution than this.
@@MrNiceGuy94 Can't you delete egr/dpf and avoid this issue?
My Mazda 2.2 d 2013 has a power delay on low RPM when I push pedal to the bodem react after 2 seconds what it can be please help me I visited the garage many Times they didn't know What is the problem thanks a lot
Where do you get your walnut media from, and how much do you use for blasting on a 2.2?
Holy smokes, walnut blasting sounds like a great fun, but it isn't for faint of heart! ;)
Hi, I’m very impressed with your work, I have the same car,64 plate 120,000 miles too. Would I be able to bring my car to u to get this done too please. Want to keep my car, love the way it drives. . How much do I charge for all this, thanks
Message me on my facebook page, same username and profile pic as on here.
Hi I’m based in Fiji….my car cx5 vibrates at 1200 rpm…anything up or down rpm it’s fine….its happens in all gears if on hill or very smooth road…Mechanics can not tell it’s gear box or what few tell me it’s gearbox and few injections….its awd diesel 2.2l
Nice Video :D
Only thing I can suggest is, when you're doing that test for the Vacuum pump, let the Fast idle [Injector Cleaning Procedure] finish when you first start the car.
Pump the brake and check the reading once the Fast Idle [1800rpm] comes down to normal idle speed.
It will definitely effect how long it'll take for Vacuum pump to reach that >10 value.
Also with regards to that Exhaust Pressure sensor pipe, I understand it's blocked, but do you HAVE TO replace it?
Can't you clean it?
Maybe soak it in some cleaning agent to soften the sooth and put it through your Ultra Sonic Cleaner and/or use an air gun and blow it out?
Thanks for the insights. You are correct. I already knew that the vacuum pump is good on this one, I just wanted to show how to test it. But yes, you should wait till the idle settles.
You can clean the pipe I guess, but the owner decided to get a brand new one as it was causing him a lot of headache and also didn't want to risk it again having issues. I kept the pipe, I may clean it if I will have time and test it for blockage.
@@MrNiceGuy94 let me know if you manage to clean it 👍
@@xegro there are 3 or 4 Mazdas booked in atm moment, so will throw it into the ultrasonic bath with the other parts.
@@MrNiceGuy94 👍
Would you recommend head gasket sealer ? Some water pulling in the cylinder in Mazda 6 2017. 😢
It won't really fix the issue just mask it for a while maybe.
Very clear! How many km had that car? I'v a Mazda 3, it's pretty the same thing
I can't remember but I think I mention it in the video.
Hi, do you live in UK?
If so what part or city?
East London/Essex.
About the brake booster pressure sensor, I noticed my brake pedal getting harder to press and looking at OBD live data it doesn't move much at all (always around 10-20kPa) when heavily pressing the brake pedal.
What should I suspect? Worn exhaust camshaft + bad vacuum pump, other than the sensor itself? Mine is a 2014 Mazda3.
Thank you
Amazing amount of carbon given the mileage. Are all of the diesel skyactive engines prone to this? I have a 2017 cx5 that is only used on motorways but I am sure going to take a look. Thanks
Unfortunately yes.
Hello. How much does it cost to have this procedure done at your place?
Hi, please get in touch with me on my facebook page: facebook.com/MrNiceGuy9494
How much is the carbon clean Mazda cx 5 also where are you based.
Contact me on my facebook page. Same username and profile pic as on here. 😉
Fabulous video, well done. I feel your channel would help me a lot with my CX-5 2.2 Diesel.
Also, I need some help...
I can not find anywhere videos on how to change my thermostat, water pump as the only ones are for the 2.5L engines...
Maybe you can help me with that?
Much appreciated!
maybe I will change a waterpump soon.
Will removing the dpf resolve most of these problems, yes i know its illegal in some countries just curious?
It won't as the DPF is filling fast from the leaky injectors.
Hi,mate haw much charge for carbon cleaning?
Message me on my facebook page. Same username and profile pic as on here.
But also I have got a link in the description or on my channel profile. 😉✋
I have a CX 5- 2017 automatic. It sort of went into a limp mode after driving for an hour on the motorway- The traction control system sign, smart brake system light, and electric parking brake light came on. Stopped and restarted and everything was back to normal. Can the carbon build up cause any of this?
Yes,it can.
@@MrNiceGuy94 Thank you for the information. Great video!
What are the running symptoms of carbon build up on this car. What faults does the car develop as carbon deposits build to this level?
P0401 but it is quite rare that it throws that fault code, if it does, there is no doubt, it is the carbon buildup.
But let's say if you have less then 45MPG average you need the carb cleaning.
@@MrNiceGuy94 Many thanks.
In a country where it was legal to delete the DPF would you expect the carbon build up to be less?
Are there any additives or detergents that would help to reduce the build up? Is it worth buying supreme type diesel fuels rather than supermarket diesel?
I would tend to to replace all gaskets and seals I come across, its quite a long job to dismantle, so if a joint blows after you have done the job then its going to be the most awkward one. I would also grease all threads with a smear of copperslip. I salute you on your replacing nuts and screws back and covering any openings which objects might drop eg, air pipes, also as you found out it is easier to remove the coolant header tank and struggle and mess around catching the coolant in bottles. It would seem the way people are taught these days is to take minimum amount off but struggle with the chance of damaging. something. If you don't have an ultrasonic cleaner, then soaking in a strong solution of soap and hot water will do the job, but best left overnight. Like he has done clean the worst off mechanically. The EGR valve looks like you can remove the electrical operator then soak the valve end.
Well done and a good job.
I completely agree with you. However as I do these cleanings quite often(8 a month roughly). From experience I can tell that the gaskets are fine, I am talking about the metal ones, if there are rubber seals anywhere I replace them no matter what as they can degrade over time. Also I test drive the cars and check them which I have fixed and if there is any issue after that I fix it ;) Also, all of these gaskets are ridiculiously expensive to replace, obviously if the client wants it I don't have any problem with it ;) For me as I do these quite often the removal and reassembling is the least time consuming job, the walnut blasting is a lot more involving.
Thats a crazy amount of buildup i sure hope my engine doesnt look like that. I also have the code p2262 but my preassure is 200+ on idle instead of ~100kpa. What do you think causes this?
Message me on my facebook page, same username and profile pic as on here.
@@MrNiceGuy94 I changed to the new upgraded sensor shy6-18-w00 and now it works great!
My car is showing low oil pressure on dash but only after 20 mins of running. Any idea what's wrong with it? 2.2D 2014
oil strainer blocked,cylinder head dirty from inside
how much sand remains where the valve is? ))
Sand? I don't use sand.
@@MrNiceGuy94 what material do you use to make blast?
walnut shell media ;)
@@MrNiceGuy94 it is less strong than sand, but it is still an abrasive material
Correct. But what's wrong with it? It is widely used for these type of applications. ;)
How much do you charge for a job like this?
Message me please on my facebook page. Same username and profile pic as here.
I have the same issue fancy doing my car
Message me on my facebook page, same username and profile pic as on here.
Has anyone ever had a problem free experience with one of these engines? We hear so many stories of how bad they are, but does every single one of them experience issues?
no one will tell you if there isn't any problems with their car as they don't have headache about it, just enjoying it
Hi, where are you located?
Hi, please message me on my facebook page. Same username and profile pic as on here.
What a job that was, well done! What is the number one cause of all this carbon build up? Is it solely the injector washers leaking, or something else also (incomplete DPF regeneration)? What mileage had the car done?
Edit: Appears to be around 110k miles on the clock towards the end of the video?
This car had around 120k I believe. The cause is the EGR system and the engine being direct injection, so the carbon residue and soot can build up inside the EGR parts, intake manifold and intake ports.
Unfortunately all direct injection engines have these issues more or less. The skyactiv is extremely bad on that side.
Really useful, but I'm still not confident to do my own. Anybody out there doing this professionally? I'm in Gloucestershire UK and have a Mazda6 2,2 Diesel that needs a good engine de-carbon.
What accent is this? Sounds kinda like polish or hungarian.
Hungarian 😂😂
Is there anyway to delete this abomination of system?!I am pulling a head for a friend tomorrow and i not looking forward to it,it makes euro cars look good !
Where are you based? And do you take jobs on cx5 regularly?
I am based in East London/Essex. And yeah, I work a lot on these engines...
@MrNiceGuy94 hi buddy, really good stuff, how can I get In touch with you for this job ?
@@sahmedt9 Message me on my facebook page. Same username and profile pic as on here.
Hi we're you based I need you help on a Mazda cx5 2013
Hi, message me on my facebook page. Same username and profile pic as on here.
Im from portugal, im almost going to you to clean my motor, looks terrible
How many kilometers does the car have?
Mazda STEALERSHIP Charged Him £5000, ok, but how much did you take?
Whaaaaat?
What do you mean? :D
Get an EGR blank plate and delete.
Run the 10W 40W Castrol Magnatec not the BS 5W 30W grade BTW if you run a thinner viscosity oil they break down faster and you end up with damaged camshaft especially on the exhaust, i was told by an engine engineer, that car manufacturers do it to get better mileage per gallon at the expense of the engine especially if some knuckle head drives around with a bung thermostat it will cause an already thin viscosity oil to get even thinner because an overheating engine thins engine oil which translates to very fast engine wear! The same guy then cracks and warps his head and cracks his block or stuffs his head gasket. You can fix using a copper sealer so dont remove your head unless you have your wallet ready or you are an ignorant knuckle head! Thinner oils only give you almost no extra economy and they wear the engine faster, especially if their are no PTFE particles in your oil like Slick 50 or Castrol Magnatec,my advice is to change thermostat every 5 years cheap insurance and change water pump and coolant at the same time, change serpentine belt at the same time, your timing chain is ok if you change your oil regularly
A 😊
A
Hello, I've messaged you on Instagram but not sure how often you check your messages. I've tried looking for your Facebook profile, but can't find it.
Really interested in booking this for my car. Have sent you a message on Instagram 👍
Texted you back 😉