My DAF615m engine was smoking badly in the canal du midi last summer . Eventually I found it to be the copper seal leaking under the injector. Changed all the nozzles, seals and now it's okay.
Excellent stuff, this could have many more viewers! I went trough this last year with the help of an older tractor mechanic. This would have saved me heaps of time last year!
Very nice video. Nice and complete info but I still have a question for you. I'm on a sailboat with a Perkins 4.236 and have just had my nozzles done but I've since sailed on from the island where I had this done and I am now in a very "middle-of-nowhere" sort of place. Now I see that two of the injectors are leaking from the adjuster nut cap. I am pretty sure the shop did not replace the copper sealing washers on those. After watching your video, it seems I can attempt to fix this in the field. My question to you: Am I correct that there should be no harm done to the injector or the "pop" setting if I remove the injectors and torque down on the adjuster nut cap to 50psi as you did in the video in hopes to create a seal? I remember the man at the injector shop being very clear (although in a language I speak poorly!), not to touch the torque on the caps or the nozzle nut...but I think I trust you more.🙂
The caps/nuts are just a loose thread and bite into the copper. Provided you dont drag the setting screw back you'll be fine. Use a blow torch to reanneal the copper or better still replace them. Check the faces of each surface as this stuff is getting very old. You may have to lap out some pitting. Use a new oil stone very fine if you need. Be sure its flat hence new.
What are the odds that I could drag the set screw as you stated, assuming I'm just setting the adjuster nut cap to 50psi? Is this a real risk, and thus proper protocol to recheck all of the pop settings after the adjuster nut cap has been torqued down?
Saludos desde Trujillo Venezuela.. la bomba de inyección que tienes en la meza es de gobernador hidráulico?? Quiero saber ,cuál es el número de los empaque de repuesto 🤔
Hello for old blighty, not sure I understand you. There isnt an injection pump here. Only injectors and my bench top test rig. Have I missed something?
Would you say the thread on the inside of the forged steel housing is durable enough to use a a fine thread nipple as part of a dent puller/slide hammer removal tool? I have two injectors that simply will not come out no matter how I pry on them.
Hmmmmm, good question. Id say unlikely but what choice do you have. If you take the studs out can you not turn the whole body clockwise, with some lubricant of penetrant oil? These are not modern engines, so not that long an injector. Unless its rusted in. Feel free to send me some images of them. Ill see if i can think of a solution. darrencrouch@dhcrouchmarineltd.co.uk Watsapp 07809607630
I usually use a thread pitch gauge and measure the outside diameter. Have had some Imperial UNC. What do you need to achieve? Are you making new lines?
Thanks for putting this online, i will give it a try myself. Would a T6354M with the turbos removed be over fueling and diesel washing the cylinders causing blow-by?
Thanks for the response, i am getting high crank pressure and wondering if i remove and sleeve the engines will the excess diesel wash and wear the bore to cause premature wear again, if so should i fit turbos or down size the injectors to 6354 injectors@@dhcrouchmarineltd3049
My DAF615m engine was smoking badly in the canal du midi last summer . Eventually I found it to be the copper seal leaking under the injector. Changed all the nozzles, seals and now it's okay.
Thats a good result. Could have been expensive otherwise.
Very nice clear informative video about what goes on in the heart of these engines
Excellent stuff, this could have many more viewers! I went trough this last year with the help of an older tractor mechanic. This would have saved me heaps of time last year!
Thanks!
You are a great communicator! Learned a lot. Thank you from DK boat owner with (still sound) 6354…
Wow, thanks! Really appreciated.
Thanks so much for this. I haven't gotten all the way through yet but this will be saved in my favorites as a reference.
You're very welcome!
Thanks for the great detail and awesome explanation
Glad you enjoyed it.
Thank you so much I will be better able to repair my 152 Perkins engine
Dan from ALASKA
Glad to help
Very nice video. Nice and complete info but I still have a question for you. I'm on a sailboat with a Perkins 4.236 and have just had my nozzles done but I've since sailed on from the island where I had this done and I am now in a very "middle-of-nowhere" sort of place. Now I see that two of the injectors are leaking from the adjuster nut cap. I am pretty sure the shop did not replace the copper sealing washers on those. After watching your video, it seems I can attempt to fix this in the field. My question to you: Am I correct that there should be no harm done to the injector or the "pop" setting if I remove the injectors and torque down on the adjuster nut cap to 50psi as you did in the video in hopes to create a seal? I remember the man at the injector shop being very clear (although in a language I speak poorly!), not to touch the torque on the caps or the nozzle nut...but I think I trust you more.🙂
The caps/nuts are just a loose thread and bite into the copper. Provided you dont drag the setting screw back you'll be fine.
Use a blow torch to reanneal the copper or better still replace them.
Check the faces of each surface as this stuff is getting very old. You may have to lap out some pitting. Use a new oil stone very fine if you need. Be sure its flat hence new.
What are the odds that I could drag the set screw as you stated, assuming I'm just setting the adjuster nut cap to 50psi? Is this a real risk, and thus proper protocol to recheck all of the pop settings after the adjuster nut cap has been torqued down?
@@strongmonty Its a screw. Probably unlikely but vey possible.
Saludos desde Trujillo Venezuela.. la bomba de inyección que tienes en la meza es de gobernador hidráulico?? Quiero saber ,cuál es el número de los empaque de repuesto 🤔
Hello for old blighty, not sure I understand you. There isnt an injection pump here. Only injectors and my bench top test rig. Have I missed something?
Would you say the thread on the inside of the forged steel housing is durable enough to use a a fine thread nipple as part of a dent puller/slide hammer removal tool? I have two injectors that simply will not come out no matter how I pry on them.
Hmmmmm, good question. Id say unlikely but what choice do you have. If you take the studs out can you not turn the whole body clockwise, with some lubricant of penetrant oil?
These are not modern engines, so not that long an injector. Unless its rusted in.
Feel free to send me some images of them. Ill see if i can think of a solution.
darrencrouch@dhcrouchmarineltd.co.uk
Watsapp 07809607630
@@dhcrouchmarineltd3049 Email sent. Thank you.
Hello, I have a question: what size is the thread of the injection nozzle to the injection line? =)
I usually use a thread pitch gauge and measure the outside diameter.
Have had some Imperial UNC.
What do you need to achieve? Are you making new lines?
Thanks for putting this online, i will give it a try myself. Would a T6354M with the turbos removed be over fueling and diesel washing the cylinders causing blow-by?
Are you getting excessive crank pressure out via the crank breather
Thanks for the response, i am getting high crank pressure and wondering if i remove and sleeve the engines will the excess diesel wash and wear the bore to cause premature wear again, if so should i fit turbos or down size the injectors to 6354 injectors@@dhcrouchmarineltd3049