For 1997 Lexus Es300 I figured it out! So follow all the instructions up til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works.
Tried this on 2000 Lexus ES but door lock cycle never happened, maybe something wrong with the car remote system. Did you stop before "...til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works..." .Maybe I will try your instruction instead.
Didn’t work for my 98 es 300. Just bought the fob online for 80.. I’m concerned Edit: I just went to your website and it told me EXACTLY how to do this on my 98 es 300. Worked !!! I’m sooo happy , thank you 🙏
What happens is by the second time doing the 5 cycle of lock/unlock the locking mechanism starts to slow down and doesn't fully lock by the 3rd cycle? Would that have to do with battery or something else altogether?
@@SaifIslam-sl9yc I figured it out! So follow all the instructions up til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works.
Idk if anyone had this issue, but this guide didn't work for me. It was close but not quite. After you do the 5 cycles close open 5 cycles then key in, on off out, you press the 2 buttons then CLOSE AND OPEN THE DOOR, then hold the lock button for a second. IF YOU DO NOT CLOSE THEN OPEN THE DOOR FIRST IT WILL NOT WORK. I found a written guide elsewhere, that worked perfectly first time.
Can I program a remote that is already programmed to a car, I’m thinking it will just overwrite it. Or do I need a remote that hasn’t been programmed yet?
OK so I tried doing the locking cycle manually and it works but when I push the lock and unlock buttons at the same time and than lock button for two seconds nothing happens. Maybe it's the key fob battery. Idk. Any suggestions on how I go about this issue? Thank you taking your time to help me.
The vehicle may already have the maximum number of fobs programmed. The procedure to erase all previous remotes instead of just to add is the same in the video with one one small difference. If you look at the steps in the description box of the video - you need to do Step 4. C. twice. So, you turn the ignition from on to off two times instead of once, everything else is done the same. Doing this will erase all old remotes once a new one is programmed.
I have 2001 ES300 with 2 OEM remotes. 1 programmed fine. the second one looks likes it programmed, but instead of 1 lock/unlock cycle I get 2 lock & unlock when I try to program it. When I close the door to test that remote does not work. the key works fine otherwise starting & manually opening the doors
The vehicle cycling twice indicates the programming failed. This could happen for a variety of reasons, there could be too many remotes already programmed to the vehicle or there may be an issue with the remote itself.
I do not have the original key fob. Will this work with an after market fob? Does it have to be a specific aftermarket fob? thanks! Btw! Its a 1998 V6 Camry...
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบรองชนะเลิศ]](http://i.ytimg.com/vi/zPm8ClLVhoE/mqdefault.jpg)
For 1997 Lexus Es300 I figured it out! So follow all the instructions up til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works.
Tried this on 2000 Lexus ES but door lock cycle never happened, maybe something wrong with the car remote system.
Did you stop before "...til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works..." .Maybe I will try your instruction instead.
It works guys i had to do it like 10 times for it to work but it did
Cool! yeah, some vehicles are much more sensitive than others when it comes to speed in which you do all the steps
Didn’t work for my 98 es 300. Just bought the fob online for 80.. I’m concerned
Edit: I just went to your website and it told me EXACTLY how to do this on my 98 es 300. Worked !!! I’m sooo happy , thank you 🙏
You're Welcome! Glad you got it figured out
Where did you order your fob from?
No info on programming a fob for the 1997 ES300? You’d be a hero if you showed a video on that one.
There's a guy who commented here. He put up instructions on how he got his 97 es300 to work.
What happens is by the second time doing the 5 cycle of lock/unlock the locking mechanism starts to slow down and doesn't fully lock by the 3rd cycle? Would that have to do with battery or something else altogether?
that happens to me did you ever figure it out
@arid5844 no unfortunately i still have not yet figured out the solution to our problem 😤😠🤬
@@life_is_a_pest rip maybe manually doing the locks instead of the power locks
@arid5844 i try doing it manually but to no avail
Will it work on 1997 Lexus ES 300?
No
Hi I have the same car. Did you ever figure it out?
@@patrickstar0212it didn’t work on mine!
@@SaifIslam-sl9yc I figured it out! So follow all the instructions up til turn key on then off and the door will lock and unlock by itself entering program mode when that happens simply press and hold "ONLY THE LOCK BUTTON" it should lock. Then shut the door and press the the lock button again confirming it works.
I dont have a key fob but alarm goes off until I put key in hole and turn how can I stop it from doing this even when I open hood did this ??
Idk if anyone had this issue, but this guide didn't work for me. It was close but not quite. After you do the 5 cycles close open 5 cycles then key in, on off out, you press the 2 buttons then CLOSE AND OPEN THE DOOR, then hold the lock button for a second. IF YOU DO NOT CLOSE THEN OPEN THE DOOR FIRST IT WILL NOT WORK.
I found a written guide elsewhere, that worked perfectly first time.
Thank you so much 💓
You're Welcome!
Will this work on a 2000 Lexus es300
no
can you have too many remotes programmed? how do you delete the memory of remotes? I worked for me but it doesn't work for more then a minute.
What is the key fob number for a 98 ES300?
Will this work on a 2002 Lexus ES 300?
no
Tried this on 2000 Lexus ES but door lock cycle never happened, maybe something wrong with the car remote system.
This is for the 1998 - not sure about the 2000 model
Can I program a remote that is already programmed to a car, I’m thinking it will just overwrite it. Or do I need a remote that hasn’t been programmed yet?
Yes - you can programmed a used remote on these.
Do you know what will work for 99 LS400? Tried this, and door cycles 4 times every time. Won't program though..
From the information that I can find it looks like there is no onboard procedure for a 99 LS400 remote-head key.
I have a 92 es300 and I’m not getting any response , any recommendations ??
This only works on a 1998 ES300
What about ES 1999
I have a 95 LS400 did all the cycles and I’m not getting a response from the door locks after all the cycles?
This procedure will not work on a 1995 LS400
Does the trunk button also been programmed after this?
Yes, all buttons will program in at the same time.
OK so I tried doing the locking cycle manually and it works but when I push the lock and unlock buttons at the same time and than lock button for two seconds nothing happens. Maybe it's the key fob battery. Idk. Any suggestions on how I go about this issue? Thank you taking your time to help me.
if the vehicle is going into programing mode but the key fob is not responding then yes there may be an issue with the key fob or key fob battery
This is what happened on my 99 es300. But then I closed the door and it started working
Hey
I tried it but at the final step the it clicks twice indicating it failed. Do you why it’s happening?!
The vehicle may already have the maximum number of fobs programmed. The procedure to erase all previous remotes instead of just to add is the same in the video with one one small difference. If you look at the steps in the description box of the video - you need to do Step 4. C. twice. So, you turn the ignition from on to off two times instead of once, everything else is done the same. Doing this will erase all old remotes once a new one is programmed.
I have 2001 ES300 with 2 OEM remotes. 1 programmed fine. the second one looks likes it programmed, but instead of 1 lock/unlock cycle I get 2 lock & unlock when I try to program it. When I close the door to test that remote does not work. the key works fine otherwise starting & manually opening the doors
The vehicle cycling twice indicates the programming failed. This could happen for a variety of reasons, there could be too many remotes already programmed to the vehicle or there may be an issue with the remote itself.
it's like a cheat code
Where do I get the remote control and which one
check out bit.ly/CarAndTruckRemotes.
Oh i forget to mention i have a 98 lexus es300
Why is it a Camry for video??
The same procedure works and many different vehicles and we don’t have access to every vehicle it works on.
This shit made my car die😭
Programming a fob should have no effect on the vehicle starting - you may have deeper issues with the vehicle
I do not have the original key fob. Will this work with an after market fob? Does it have to be a specific aftermarket fob? thanks! Btw! Its a 1998 V6 Camry...
It just needs to be compatible with the FCC ID: of the original remote
Do I have to use the master key? I only have old blade and new blade and fob for the car. I do not have have the old key fob
yes
When I try to cycle through my unlock and lock it gets stuck is that a problem with the vehicle or problem with the program
try just manually doing the cycles of 5 - using your hand on the actual door lock indicator on the drivers door
Mines did the same thing .. I think it’s the car, I just did the drivers door manually and it worked