Thank you for uploading this. FYI - this is confirmed working for remote FCC HYQ12BBX in a 2005 Toyota Tundra. I tried a couple of procedures, but they didn't work. Your procedure worked. I'm so glad I found your video. You might add a note that this procedure clears all previous remotes. I was adding a second remote and it worked, but the first remote no longer worked. I had to repeat the process and all all the remotes at the same time to get both working.
From Australia. My Toyota camry 2005 required a different but simpler method to program key fobs. On-off-on-off-on Clock displays PROG Press buttons once each on each remote Off 306W 2.4L 4SPA ALTISE SEDAN TOYOTA CAMRY ACV36R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 112kW 4sp Auto 4dr Sedan FWD [08/02 - 05/06]
Will it work for a 2007 Toyota camery I had a highlander is a key fob like that but the highlander transmission gave out.. now I have the key fob can I use it to the camery?
Hi, you mention using the master key to program the new remote key fob. Will programming work with an aftermarket car key - one that does not have the original toyota logo on it? Going through the procedures, the "programming mode" will not kick in and I think that is the issue? Would be great if you could confirm that. Thank you.
If the aftermarket key is programmed as a master key this should work. Although it is very unlikely that this is the case, you can tell wether you have a master key or not by putting the key into the ignition (without turning it) and watching the security light. If the light goes off instantly, you have a master key. If it stays on for about 2 secends and then turns off, you dont have a master key and you wont be able to progamm a remote with that key. Hope that helps :)
@@student8015 There are different ways to get into programming mode, altough they are all pretty similar. Look around online and try different ways and give each of them a couple tries. On some cars its even possible to progamm the fob with the valet key instead of the master key, so you might as well give that a try. If you Fob isnt regognized after the car is in programming mode, then your Fob might habe the wrong FCC-ID. If you are from Europe or anywhere else but the US, you will probably have a hard time finding correct ID since the ones online are mostly for US cars. Unfortunately I had the same problem and to this day have not found the correct ID for my 2001 MR2 from Europe. Hope that helps. Good Luck ;)
I've lost my original remote. If I buy the replacement remote, will this work? I only have a key (without remote) that starts the car and locks/unlocks.
I had to try it a few times to get it to work so if you did try it a few times and didn't work then you'll need a professional car key programmer to do it
not really, you just need to repeat the process exactly as its done a few times, if it didn't work then you'll have to send it to a shop to program it for you.
@@SmartCarsJordan Oh yeah that was great. I bought my extra key fob remote off amazon and it came with no instructions but with a card saying go to a website to register and get instructions, but then they wanted a cc number (suspicious?) and when I read the fine print it said I would have a five day trial, then they'd start charging me $39.95 a MONTH. Uhmm, no. I found your video and programmed it in about ten minutes (because I tried and did it twice.) So thanks again!
Doesn't work. I tried 20+ times, and at the end, my fob is definitely interacting with the car, causing the lock to cycle every time I press/hold the lock button at the end, but it's not quite making the proper connection. I do everything in step with the video, and I have the exact same Highlander. Any thoughts (besides take it to a dealership)??
Lamestream…did you figure this out by any chance? Exact same Highlander and exact same problem. Been through the procedure 20 times same result as yours. Thanks much
@@ericdimartino8838 Never got it to pair, unfortunately. I gave up and returned the key fob. On another page, someone suggested that my car might already have the maximum number of fobs programmed in, and there's a way to unpair them all and start over, but I wasn't about to mess with that (don't wanna screw up the one I already had that works). Good luck, and let me know if you figure out a solution!
i have a 2003 tundra sr5 access cab. When doing this procedure I am getting double lock/unlocks which appear to suggest that the vehicle has rejected the new fob. suggestions?
So I am able to reprogram one key fob that came with the car, but when I try to add another key fob (one I bought from ebay that has a newer look with they key and fob in one), it does not work. When in programming mode I press lock and unlock and the locks cycle twice and nothing happens after I try to use the key but the original key fob it works fine (programming and using to lock/unlock)
seems like my 2016 corolla L doesnt come with factory lock/unlock module in car? is that true? ive tried to manually add 3 diff fobs and tried through tech stream and it fails on first step it cant even commuincate with the keyless entry module im assuming ? The fobs worked fine on a 2016 camry le though
@@SmartCarsJordan I tried to enter it in programming mode and the locks never cycled.. That makes me believe that it doesnt work for my car right? Am i gonna have to waste $650 to get it installed huh cuz i called a shop nearby and they said it is $50 per door and extra for the alarm/installation
It took me 3 tries to get it to work. It should work fine on your car. But if you make sure you have a master key programmed into the car then you can program the rest of the keys. It seems your keys might not be masters
@@SmartCarsJordan how can i get it then? Because I bought my car a couple weeks ago and ordered a remote key fob to try it on but i never tried it before i ordered it. And some people are saying it doesnt work on every corolla ce because it doesnt have an alarm installed.
Ask the seller if they have any extra keys. If they dont then go to any shop with a bidirectional code programmer and let them register the current key as master key, then program extras by yourself.
Maybe the relay that detects opening and closing the door is not working properly. You can tell if you have to open and close the door many times for the internal cabin light to go off
I have a 2008 Corolla, I have the master key but I do not have the key fob, the car never came with one either. Is it possible to buy the Corolla fob and program it even tho I don’t have an original fob?
@@donkey5ever435 it was an impossibility trying to do this. I just found how to disconnect the alarm, just in case I lost the key fob. The alarm box in under the steering wheel.
Hi, I'm having trouble to program toyota avensis t25 2004 I have another avensis original key fob I've also another key ordered from wish app but can't get it done with both, please help needed. Thanks in advance
hi, i did this 3 times until i got it right, so you'll have to make sure you do exactly like the steps in the video and repeat it a few times until it works. if it didn't then you'll have to visit a shop to program it for you
Same here. Car is 2003 toyota avensis t25 . It doesnt work on this car. Cant get it to go program mode, (lock unlock sequence) . If someone knows other way , please tell.
Thanks for this video. Are the trunk and alert (red button that lets your car tell you where it is from far away) keys programmable on a 2016 Toyota fob?
Hi, this way is for programming keyfobs it should not affect keys. So if you still have the master key which should not be affected by this method. Just repeat the process in the video again and program the key fobs.
Thank you for uploading this. FYI - this is confirmed working for remote FCC HYQ12BBX in a 2005 Toyota Tundra.
I tried a couple of procedures, but they didn't work. Your procedure worked. I'm so glad I found your video.
You might add a note that this procedure clears all previous remotes. I was adding a second remote and it worked, but the first remote no longer worked. I had to repeat the process and all all the remotes at the same time to get both working.
Thank you I am very glad that the video helped
How can I program in for my 99 Toyota Camry lE
If this didn't work then you need a professional key programmer to do it
From Australia. My Toyota camry 2005 required a different but simpler method to program key fobs.
On-off-on-off-on
Clock displays PROG
Press buttons once each on each remote
Off
306W 2.4L 4SPA ALTISE SEDAN
TOYOTA CAMRY ACV36R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 112kW 4sp Auto 4dr Sedan FWD [08/02 - 05/06]
Thank you for sharing that
Thank you so much. Saved me a lot of money by just buying an after market remote for the Highlander.
You're welcome 💗
Which remote worked for you?
It worked on my 2006 Scion Xb👌
Cool I am glad it did
lol i just bought one and came here, hilarious
Exactly why I'm here
Will it work for a 2007 Toyota camery I had a highlander is a key fob like that but the highlander transmission gave out.. now I have the key fob can I use it to the camery?
Hi, you mention using the master key to program the new remote key fob. Will programming work with an aftermarket car key - one that does not have the original toyota logo on it? Going through the procedures, the "programming mode" will not kick in and I think that is the issue? Would be great if you could confirm that. Thank you.
If the aftermarket key is programmed as a master key this should work. Although it is very unlikely that this is the case, you can tell wether you have a master key or not by putting the key into the ignition (without turning it) and watching the security light. If the light goes off instantly, you have a master key. If it stays on for about 2 secends and then turns off, you dont have a master key and you wont be able to progamm a remote with that key. Hope that helps :)
@@RisingLPStudiosmine still doesn’t allow me into programming mode even after the key turned the light off immediately:(
@@student8015 There are different ways to get into programming mode, altough they are all pretty similar. Look around online and try different ways and give each of them a couple tries. On some cars its even possible to progamm the fob with the valet key instead of the master key, so you might as well give that a try. If you Fob isnt regognized after the car is in programming mode, then your Fob might habe the wrong FCC-ID. If you are from Europe or anywhere else but the US, you will probably have a hard time finding correct ID since the ones online are mostly for US cars. Unfortunately I had the same problem and to this day have not found the correct ID for my 2001 MR2 from Europe. Hope that helps. Good Luck ;)
I've lost my original remote. If I buy the replacement remote, will this work? I only have a key (without remote) that starts the car and locks/unlocks.
Did you ever figure out if you could I’m in the same shoes
This should work the original master key Is the must have in this method
@@SmartCarsJordan so you DO need the original key for this to work? What if I do t have my original I bought my t100 pickup used
I couldn’t get it to program on my 99’ Sienna. Any other tips?
I had to try it a few times to get it to work so if you did try it a few times and didn't work then you'll need a professional car key programmer to do it
I’m having issues with my 2003 Toyota Tundra is there any different methods being that mines a limited or ?
not really, you just need to repeat the process exactly as its done a few times, if it didn't work then you'll have to send it to a shop to program it for you.
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
Great video, had to do it twice but worked like a charm. Thanks!
Glad it worked , thanks 👍
@@SmartCarsJordan Oh yeah that was great. I bought my extra key fob remote off amazon and it came with no instructions but with a card saying go to a website to register and get instructions, but then they wanted a cc number (suspicious?) and when I read the fine print it said I would have a five day trial, then they'd start charging me $39.95 a MONTH. Uhmm, no. I found your video and programmed it in about ten minutes (because I tried and did it twice.) So thanks again!
Wow $39 a month that's a big scam. Good that you caught it before registering. I am very happy that the video helped. Thank you too
Doesn't work. I tried 20+ times, and at the end, my fob is definitely interacting with the car, causing the lock to cycle every time I press/hold the lock button at the end, but it's not quite making the proper connection. I do everything in step with the video, and I have the exact same Highlander. Any thoughts (besides take it to a dealership)??
Maybe your key is not a master key so you need to take it to a shop with an advanced programming tool to make the key master
Lamestream…did you figure this out by any chance? Exact same Highlander and exact same problem. Been through the procedure 20 times same result as yours. Thanks much
@@ericdimartino8838 Never got it to pair, unfortunately. I gave up and returned the key fob. On another page, someone suggested that my car might already have the maximum number of fobs programmed in, and there's a way to unpair them all and start over, but I wasn't about to mess with that (don't wanna screw up the one I already had that works). Good luck, and let me know if you figure out a solution!
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
i have a 2003 tundra sr5 access cab. When doing this procedure I am getting double lock/unlocks which appear to suggest that the vehicle has rejected the new fob.
suggestions?
Not sure why ... maybe it needs a 2nd try or the key you're using is not programmed in the car as master key
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
How to programming toyota Corolla ae110 yom97 car key. It having ir remote. Not radio frequency
Hi the same way should work try it
@@SmartCarsJordan it doesn't work my car..😓
Please help
The key you have might not be the master key ... so you'll need a professional car programmer to make one master and another slave key
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
How can i program key fob for the Sequoia 2002?
Worked for my sons 2007 Toyota Matrix XR
nice, glad to hear that
So I am able to reprogram one key fob that came with the car, but when I try to add another key fob (one I bought from ebay that has a newer look with they key and fob in one), it does not work. When in programming mode I press lock and unlock and the locks cycle twice and nothing happens after I try to use the key but the original key fob it works fine (programming and using to lock/unlock)
seems like my 2016 corolla L doesnt come with factory lock/unlock module in car? is that true? ive tried to manually add 3 diff fobs and tried through tech stream and it fails on first step it cant even commuincate with the keyless entry module im assuming ? The fobs worked fine on a 2016 camry le though
Try resetting the ecu then try again
Does it work for 1994 Toyota crown?
...thank you - liked/subscribed...2002 Highlander..
You're welcome
what if my car is not detecting the key fod? i have a 99 toyota camry
There are 3 possibilities in precedence
1. The key is not a master key
2. You didn't do the process correctly
3. The car is too old and not supported
Tried it on my 2003 Toyota Corolla Ce and it never works. Why is this? Does it not work on this model??
It should work. Your key might not be registered as a master key
@@SmartCarsJordan I tried to enter it in programming mode and the locks never cycled.. That makes me believe that it doesnt work for my car right? Am i gonna have to waste $650 to get it installed huh cuz i called a shop nearby and they said it is $50 per door and extra for the alarm/installation
It took me 3 tries to get it to work. It should work fine on your car. But if you make sure you have a master key programmed into the car then you can program the rest of the keys. It seems your keys might not be masters
@@SmartCarsJordan how can i get it then? Because I bought my car a couple weeks ago and ordered a remote key fob to try it on but i never tried it before i ordered it. And some people are saying it doesnt work on every corolla ce because it doesnt have an alarm installed.
Ask the seller if they have any extra keys. If they dont then go to any shop with a bidirectional code programmer and let them register the current key as master key, then program extras by yourself.
my 4runner doesnt want to start the sceurity system is locked on. how can i solve this
? thank you
You'll need a technician with a bidirectional programmer to reset the security system and reprogram the keys
@@SmartCarsJordan thank you
Thank you brother I did it
You're welcome. I am glad it worked
where can i buy a remote for my 2006 Toyota Tundra
Amazon probably will find many there selling universal remotes that would work on your car.
What if I don’t have the original fob, just the master key, will programming the fob be the same?
Unfortunately no. You have to program the key as master using a professional car programmer
Worked on my 2010 Camry. Thank you!
Good to hear that. You're welcome 💗
I couldn't get it to work on my 05 corolla ce????? Help please
I tried that but my driver door won't reset, any idea what could fix that
Maybe the relay that detects opening and closing the door is not working properly. You can tell if you have to open and close the door many times for the internal cabin light to go off
@@SmartCarsJordan the light goes off every time I closed the door, and when I opened the door the light goes on
Then try to repeat the process it worked for me the 3rd time since you might miss a step sometimes
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
There are a lot of remote control, wich one is good??
Search for key replacement remote for your specific car to have all the functionality
Great video. It works. Thank you
Would it work for a Toyota corolla 1997
I have a 2008 Corolla, I have the master key but I do not have the key fob, the car never came with one either. Is it possible to buy the Corolla fob and program it even tho I don’t have an original fob?
Great video. If I buy a secondhand Toyota fob which is programed will your method overide this and recognise the new car?
It should yes
Will this work for a 96 camry??
Hi yes you matter 💗 I didn't try it on 96 camry but you can try it and let us know
Does it work? I have a 96
@@donkey5ever435 it was an impossibility trying to do this. I just found how to disconnect the alarm, just in case I lost the key fob. The alarm box in under the steering wheel.
It should work fine. Try it and let us know if it does
@@imatter4619 did you succeed with the keyfob? I didn't know the 96 had an alarm lol
How to clear the key fob programming? I might have a lot and I can't program the new ones
you need a professional car programmer for that
Will this work for a 97?
It should work you can try and let us know
Will it work for 98 Corolla?
Yes it should work just fine. Just try it a few times since sometimes is missed
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
Can I get a newer/nicer fob for a different Toyota and program it to my 03 Matrix this way?
I am not sure about that... only used generic keys , you can try it and let us know how it goes
Will this going to work for RS3000 toyota alarm system?
Hi, yes sure it should work. Try it and let us know how it goes
Is does work for 99 Camry?
It should work , try it and let us know
I tried several times but doesn’t work
Anyone get this to work for a 2008 toyota corolla?
Hi, I'm having trouble to program toyota avensis t25 2004 I have another avensis original key fob I've also another key ordered from wish app but can't get it done with both, please help needed.
Thanks in advance
hi, i did this 3 times until i got it right, so you'll have to make sure you do exactly like the steps in the video and repeat it a few times until it works. if it didn't then you'll have to visit a shop to program it for you
Same here. Car is 2003 toyota avensis t25 . It doesnt work on this car. Cant get it to go program mode, (lock unlock sequence) . If someone knows other way , please tell.
Works for me
Thank you so much 🥰
You’re welcome 😊
Thanks for this video. Are the trunk and alert (red button that lets your car tell you where it is from far away) keys programmable on a 2016 Toyota fob?
It depends if the replacement key has those buttons then they will be programmed through the same process
اي موديل تنفعل هاي طريقه
هل تنفع في هايلوكس٢٠١٣
بتنفع لاغلب موديلات تويوتا ... جربها اذا ما زبطت ما بتضر
Sounds like a PlayStation cheat code, up up, down down, X, up, left, O, down up down up...
Will this process work for my 1995 Toyota Supra?
You can try it and let us know , it should
YOU HAVE A SUPRA ?!
By any chance, did you make it work?
Ok but what if you only have one button instead of two on the fob
I have a Toyota Rav4 2005 and was trying this way and doesn't work I need help or other options,thanks
Hi, It should work on your car you just need to try it a few times. For me it worked on the third attempt
Did not work for 2009 toyota tundra 😔
thank you for sharing that, it might not work on all models
Thanks buddy
You're welcome
did not work on 2008 sequoia
Thank you for sharing, but It should work
Worked on my 2006 scion xb😁😁😁 the comment below 👍🏼👍🏼👍🏼😁😁
Scion is Toyota
What if, after trying this , No key will work anymore? Is there a way to reset and start from the beginning?
Hi, this way is for programming keyfobs it should not affect keys. So if you still have the master key which should not be affected by this method. Just repeat the process in the video again and program the key fobs.
Didnt work for my 99 Toyota Camry hellppp
Try it again but carefully follow the steps it should work
th-cam.com/video/oZvs3ZhaeTQ/w-d-xo.html
Why isn’t mine working :((((
Try again
it's not working
Do it work on 96 celica
It should work , try it and let us know
No method at all works for a 06 Toyota rav4 limited edition
@Smartcars
Ок
😊
The Oo
Will this work for a 92 celica?