It looks about the same do you know if it's the same for the older unit I just got one from a junkyard for my 03 suburban I'm not sure when they were introduced but the part it is in was the same from 99 I he trucks and 00 for the SUVs till 06
Please remove the step that clears the other programmed buttons. Following the steps, I cleared my already programmed buttons and now have to find remotes to reprogram them.
Failed to retain the door control Everytime I hit the outer left and right button hold it down till it blinks fast hold my remote up program the button I want to use until it goes solid then I do the first step again to program the other side and it wipes it out completely clears the first button
The light on the lil house doesn’t blink or anything. I click on it and nothing. Do you know why it does that ? Homelink came with the truck when I purchased it
Tinkering Fox do you know where that fuse would be located at ? I was looking into the wires and testing them. There is 3 wire black, brown and yellow/violet or burgundy wire and I tested them. The yellow/violet wire doesn’t light up. And I traced that wire to the “mid bec” and I don’t know where it goes from there after.
danger, didnt work for me. I have tried all the differant videos for this..... my opener is old and doesnt have a learn button but it should still be able to program with the remote itself
Whenever I try to add another garage door it erases the previously saved doors so the button no longer opens that garage door. Anyone else kmow how to fix this?
Press and hold the two outter buttons for like 15 seconds to clear everything out. Next hold your working remote next to the Homelink button you want to use and press both the working remote button and the Homelink button simultaneously for like 5 seconds. The blinking should change to fast. Now if it won’t open your garage door that’s ok because it’s now cloned. You can now program your door per its instructions and the Homelink should be able to program to it like any hand held remote.
I have had an issue once using a remote to clone to the Homelink. One remote worked fine while another (different brand) didn’t work. Try another remote if possible and if you don’t have on you can pick one up (universal) at Home Depot for like $20.
Thanks for not telling us we were clearing out any stored programming beforehand, genius
It would be nice if you said in the beginning “don’t hold both these buttons like I’m doing” since I now have to redo my other door now.
Thank you, I was looking at other videos but none worked, then I saw yours and it worked on the first try. 👍👍👍
You’re welcome!
Just got done programming my garage to my home link on my 04 yukon thanks man 👍🏻
On my 04 yukon am trying to program the foldaway mirrors but cant get it to work do u kno how to program them ?
@@gerardoespinoza762 you have to program the mirrors with your driver select button number. the #1 and #2 driver buttons
Nice. Got both garage doors working. The queen should be Happy now. Ty
Thanks I was trying another method and this one worked!!!!
Seems fairly over complicated lol. Worked for me too.
@@P_Weave b
@@mustardseed2736 c
This worked for my 2015 GMC Yukon Denali, thanks!
Great video. You've helped me twice in 3 years....Carry On....
Thank you very much is working now, my garage 🎉🎉🎉
Dude! I tried multiple tutorials on this and yours was the first one that worked! Thanks!
Worked like a charm! Thank you!
Finally got it! Thx...I did have to run press the red button on the garage door motor assembly too.
Solid video👍🏻
Worked perfectly. Thank you!
Thank you worked first time
2015 impala
Thank you for your video, it helped me tremendously.
Thank you very much for the information.
Thanks bud I appreciate your video!! Got it the first time I tried it!!
It didn't do the exact thing as yours.... but I winged it and it works now!! Thanks.
Tanks works for my 2017 Yukon Denali 👍🏻
Thank you so much!! Finally got it working!
Where did you buy the Homelink< my truck also does not have it?
Thanks very simple 👍🏼
It looks about the same do you know if it's the same for the older unit I just got one from a junkyard for my 03 suburban I'm not sure when they were introduced but the part it is in was the same from 99 I he trucks and 00 for the SUVs till 06
Good stuff man worked like a champ!
I can’t get my light to flash on my home link and I can’t find your other video the second one
Thanks for explaining how to use the learn button. The manuals suck for the how to part.
Would it be possible to connect a different device such as automatic door locks for the home or interior home lights that are Bluetooth???
Please remove the step that clears the other programmed buttons. Following the steps, I cleared my already programmed buttons and now have to find remotes to reprogram them.
Did you try programming your present remotes by holding them next to the learn button on the motor?
Thank you, i'm gonna try it.
Awesome! Worked perfectly
So when I press the learn button does it deprogram my other vehicles?
Failed to retain the door control
Everytime I hit the outer left and right button hold it down till it blinks fast hold my remote up program the button I want to use until it goes solid then I do the first step again to program the other side and it wipes it out completely clears the first button
You’re welcome
Thanks the owners manual was way off. This worked the first time.
Good explanation Thank you ❤️
So how do I program 3 clickers? first do 2 buttons to program, after that do single and the button that I want to program?
OMG Thank You. Programming these "is so easy" if only you know what to do. Thanks for figuring out how to program a second door and posting the video.
it worked thank you!!
The light on the lil house doesn’t blink or anything. I click on it and nothing. Do you know why it does that ? Homelink came with the truck when I purchased it
Not sure, maybe a fuse or bad unit?
Tinkering Fox do you know where that fuse would be located at ? I was looking into the wires and testing them. There is 3 wire black, brown and yellow/violet or burgundy wire and I tested them. The yellow/violet wire doesn’t light up. And I traced that wire to the “mid bec” and I don’t know where it goes from there after.
Life of Trilla I’m not sure. I’ll take a peek at the schematic later if I can. Kinda elbow deep right now.
Tinkering Fox can I get a link of the schematic ? I’ve been looking everywhere for it.
Haha "awesome", good video. I did the same thing - had to drive back and forth after clearing the memory on it.
Yeah, It was good practice for round two in Montana. Had a few trucks to program.
Good shit thanks
Great info !
Thanks
danger, didnt work for me. I have tried all the differant videos for this..... my opener is old and doesnt have a learn button but it should still be able to program with the remote itself
Whenever I try to add another garage door it erases the previously saved doors so the button no longer opens that garage door. Anyone else kmow how to fix this?
Very useful!
Worked for 2014 GMC Sierra
Do you need to have a home remote?
No, I don’t think so. Clear all memory in the Homelink, then enter programming mode on your opener. Program the Homelink just like a regular opener.
This one can use for came sliding doors? Can you explain?
"Came sliding doors" wtf you talking about Willis?
Worked.....thank you !
You’re welcome!
Thank you. Worked well.
Quick and easy! Thank you !!
It worked
i watched another video
only used the learn button, no remote needed
What of you don’t have a remote ?
After the buttons have been cleared you should be able to sync it to your garage motor if you put the garage motor in learn mode.
@@kevefox thank you
Thank u!
You’re welcome
mine won’t program . just does a slow blink
Press and hold the two outter buttons for like 15 seconds to clear everything out. Next hold your working remote next to the Homelink button you want to use and press both the working remote button and the Homelink button simultaneously for like 5 seconds. The blinking should change to fast.
Now if it won’t open your garage door that’s ok because it’s now cloned. You can now program your door per its instructions and the Homelink should be able to program to it like any hand held remote.
I have had an issue once using a remote to clone to the Homelink. One remote worked fine while another (different brand) didn’t work. Try another remote if possible and if you don’t have on you can pick one up (universal) at Home Depot for like $20.
Tinkering Fox nope the blinking don’t change from slow to rapid
tried a different remote with same result
That’s odd, I wonder what the deal is? Have you tried just programming the home link without using a remote?
It worked 😁😁😁
Never worked for me
Thief, step #1, break into truck, step #2 open garage door, no thanks.
It worked thank you!!