A GREAT Model Kit! Airfix Curtiss Tomahawk Mk.II in 1/48 Scale - Build & Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 147

  • @ianbeale2527
    @ianbeale2527 ปีที่แล้ว +18

    I've recently bought this kit. I normally only build 1/32 and 1/24 aircraft, but I managed to get it brand new and sealed.for only £3 from a local charity shop. So, it's worth me swapping scales at that price. and makes a great change from the larger scales.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +4

      £3! Absolute bargain

    • @ianbeale2527
      @ianbeale2527 ปีที่แล้ว +3

      @@ModelMinutes I don't normally buy kits from that particular charity shop as they tend to be almost retail prices. The manager seems to spend time on Ebay and chooses his prices based on that. However, one of the volunteers had priced the kits this time. I also picked up 2 starter sets for the same price too !.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      @@ianbeale2527 that’s amazing!

    • @neilhaas
      @neilhaas ปีที่แล้ว +2

      🤩☺️😁❤😊🎉 very nice fighter plane aircraft. I like the Curtiss P-40 Tomahawk nice build model plane.

    • @neilhaas
      @neilhaas ปีที่แล้ว +1

      3 pounds so that's $7.00 for this kit model fighter plane.

  • @andrewluchsinger
    @andrewluchsinger ปีที่แล้ว +6

    Those P 40's were my favorite planes of WW2. I have other favorites as well, but the P 40 always seems to be a choice for a lot of folks that I know. I have one hanging above my head at this time.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Awesome! It's probably one of my most-built types of aircraft, second only to the spitfire (which is partially due to there being so many available and often quite cheaply)

  • @Simon_Nonymous
    @Simon_Nonymous ปีที่แล้ว +3

    I can just imagine your house is mainly filled with P-40s in all scales and flavours :-) I saw the starter kit in LIDL yesterday but managed to resist building it again.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      I really wanted to get one, but my local Lidls only had tanks and spitfires

    • @Simon_Nonymous
      @Simon_Nonymous ปีที่แล้ว +1

      @@ModelMinutes if I am allowed my pocket money I'll see any are left - just finsihing my Tiger I that I started 90 minutes ago 🙂

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      lol :P @@Simon_Nonymous

  • @MikeShea-bj6ij
    @MikeShea-bj6ij ปีที่แล้ว +4

    A couple weeks ago I finished the Airfix P40B in 1:72 and now I want to try this one out. Been rather pleased with Aifix kits overall.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      yes, any airfix kit that was tooled in the last 10 years or so will be a delight :)

  • @GhostRider247
    @GhostRider247 ปีที่แล้ว +2

    cracking job there Mat !!! I've just done the Lidl one , but that sharks mouth decal ...omg what a fight !!!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      it can be a bit difficult with it being a funny shape, i think the designer over at airfix did a fair job as getting it as close as they could to fitting

    • @GhostRider247
      @GhostRider247 ปีที่แล้ว +2

      @@ModelMinutes defo looks fantastic on though eh !!!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      @@GhostRider247 for sure 🤩

  • @lonkatsa8037
    @lonkatsa8037 ปีที่แล้ว +2

    I really love the P 40! I think American planes take up most of my favourite list for planes! Great model too! I hope to be able to paint as well as you someday!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thanks! Just keep practicing anf you will get there!

  • @12am_scale_modeling
    @12am_scale_modeling ปีที่แล้ว +5

    Those decals look fantastic and legit. I think this is defiantly one of your best builds! Can’t wait for the hurricane build video

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Thanks a bunch! Not sure when the hurricane will be out - there are some other videos in the queue before that one can get edited

  • @themapmaker5374
    @themapmaker5374 ปีที่แล้ว +2

    Great job on a very nice P-40B!! Love the 3D printed stand too. I did this one a while back. Perhaps just a bit over-engineered, but nothing is perfect. It's easily the best P-40B in 48th scale. Currently I'm working on the Hurricane and the Bolton Paul Defiant kits simultaneously. I'm loving Airfix, they've come a long way!!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      Thank you very much! Yes, Airfix have improved a lot since I first started building them in my youth

  • @yorkshiremanmodels
    @yorkshiremanmodels ปีที่แล้ว +2

    great build pal and it looks fantastic
    airfix decals in my view are some of the best you can get now they are cartograph
    looking forward to your next build

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Totally agree - those decals help lift the quality of their kits! I've got a "fun" build scheduled for a few weeks time all being well :)

  • @zanderlabuschagne2368
    @zanderlabuschagne2368 ปีที่แล้ว +2

    Nice, I like the 1/48 builds more. Camo looks very nice.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Thanks 👍1/48 is a scale that allows just a little bit more detail which is nice

  • @jcwoodman5285
    @jcwoodman5285 2 หลายเดือนก่อน +1

    I enjoyed this kit! Love the P40 & this is an above average kit. I think it's the best P40b kit in 48th...

  • @valborchardt3596
    @valborchardt3596 ปีที่แล้ว +1

    Welcome back Matt, very nice model. Take care

  • @hattrick8684
    @hattrick8684 ปีที่แล้ว +2

    For exhaust stains I’ve found Tamiya clear smoke brushed on first, then a very light and narrow layer of AK insignia white followed by another wider thin layer of Tamiya clear smoke with a final matte varnish does a good job

  • @evilbobthebob
    @evilbobthebob ปีที่แล้ว +2

    I used my wife's paper/vinyl cutter to make masks like that for a Hurricane. It really does make things much easier!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Yes, I have a cutter and still trying to figure out how to make masks on it lol

  • @ModelNerd
    @ModelNerd ปีที่แล้ว +1

    Very nice job, Matt. I like the way the cockpit sides build up before being inserted as a single unit. The flying stand is great too - looking to do that with my upcoming Lancaster that I broke the landing gear on!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      Thanks a lot! Yes, the display stands are a handy 3d printable addition

  • @bobsmodels123
    @bobsmodels123 ปีที่แล้ว +2

    Built this myself, the two fuselage halves felt like they didn’t fit, and the cockpit panel pieces were a bit thin, loved this tho. Thanks for the video Matt, I was looking forward to it lol!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Hmm, i found the fit of the two halves to be really good - perhaps there was something not quite in the right place on the inside? Thanks for watching :D

    • @bobsmodels123
      @bobsmodels123 ปีที่แล้ว +1

      @@ModelMinutes Yea I think it was the cockpit placement, the cockpit pieces were just straight up thin and messed up some of the fuselage, otherwise it was a great build, probably the best 1/48 P40 out there!

  • @neilmcclary
    @neilmcclary ปีที่แล้ว +2

    great build your skills have come on so well great looking model

  • @MikoyanGurevich-xc7ft
    @MikoyanGurevich-xc7ft ปีที่แล้ว +2

    Very nice build Matt, the exhaust staining technique with the airbrush in particular is really interesting

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thanks! 👍 It's taking a bit of practice to get the airbrush weathering done to a point where it looks right for me, but I think i'm getting there

  • @bradleyhatchen
    @bradleyhatchen ปีที่แล้ว +2

    Also I did the earth first that added the grean after it was quite easy .to brush that in it look good

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      yeah, definitely! That's what I normally do - light to dark :D

  • @scaleffect
    @scaleffect ปีที่แล้ว +3

    An excellent result. Hope to acquire and build one eventually. Too many models, not enough time... A common problem for us all I'm sure :)

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Best of luck! I know how you feel, I also have too many kits haha

  • @ljscalemodels526
    @ljscalemodels526 ปีที่แล้ว +2

    Hey Matt - great job, looks fantastic and I love the construction of the cockpit, cheers Liam

  • @LondonPredatorAngler
    @LondonPredatorAngler ปีที่แล้ว +1

    I have been waiting on you building this from when you showed us you bought it a few months back... I am gutted I never picked up this particular Tomahawk... you done an awesome job, with some good tips... thanks! 👌👍

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      Thanks very much! Perhaps it will come back into the range in the future

  • @egg-xb4zu
    @egg-xb4zu ปีที่แล้ว +2

    Great panel line wash

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thanks! I tried to not go too heavy on this one

  • @bradleyhatchen
    @bradleyhatchen ปีที่แล้ว +2

    Yes it's a great kit mine was on landing wheels down I still have to add gun on the wing but it look good I did hand brushing prime it and did the flying tigers it a nice build

  • @markfranks1329
    @markfranks1329 ปีที่แล้ว +3

    The pilot should have been in shirt sleeves and shorts as most of the air fighting over the Western Desert was below 8000ft. However, as you can't see much of him, particularly as you've opted for a closed canopy, I suppose this point is moot.
    Fair build.
    Good use of kit 'transfers'.😂

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Yes, That is a good point about the pilot. It's a more "generic" one that has been included in a number of their 1/48 kits and I think to have a desert specific one would push the price up a touch

  • @wadejustanamerican1201
    @wadejustanamerican1201 ปีที่แล้ว +2

    Thanks for the video, a really nice build.

  • @ninjawithfishontheback
    @ninjawithfishontheback ปีที่แล้ว +2

    amazing!!!, could you please make a video on how to make chipping with a paint brush?

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Good suggestion, I’m sure I could come up with something

    • @ninjawithfishontheback
      @ninjawithfishontheback ปีที่แล้ว +1

      @@ModelMinutes thank you soo much!

  • @ShuttleFactoryScaleModels
    @ShuttleFactoryScaleModels ปีที่แล้ว +3

    Wonderful job Matt, that is one stunning looking P-40. Always love the look of the P-40 in the colours of the Royal Air Force, in the North African theatre. Also, I love the idea to mount it, in-flight on a display stand. Are you going to make more aircraft kits on display stands? Keep up the great work.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Thanks! Yes, I definitely need to do more models in flight, something that I will find suitable subjects for - I think they also look really nice in pictures when they are in an "action" pose :)

  • @FinsburyPhil
    @FinsburyPhil ปีที่แล้ว

    Nice to see - a lovely model. I picked one of these up at a bargain price and I'm looking forward to getting round to it. Thanks for an excellent video.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      i hope you enjoy your kit!

  • @AV-8History
    @AV-8History ปีที่แล้ว +3

    @ModelMinutes could you take a look at the airfix bomber resupply set and maybe do a diorama with it, would be interesting to see what you could do with it.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      That is a great suggestion - i've seen it a number of times and would be interested - when I have enough time and money that is lol. Which bomber do you think it would look good with?

    • @AV-8History
      @AV-8History ปีที่แล้ว +2

      I would like to see it with a Halifax or a Wellington, plus you have a lanc diorama so it would change it up a bit. But whatever works best for you, at the end of the day, it's your hobby and whatever you would enjoy best is what would look best. Thanks for the reply

    • @thekeithfulbarrums
      @thekeithfulbarrums ปีที่แล้ว +1

      A wellington would be a great idea, I agree.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      @@AV-8History no worries, I do like a wellington tbh

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      @@thekeithfulbarrums nice!

  • @DutchDaveModels
    @DutchDaveModels ปีที่แล้ว +1

    Nice job. Very good looking Tomahawk. ✨👍✨

  • @tail_lamp7538
    @tail_lamp7538 ปีที่แล้ว +5

    Building this kit in 1:72 right now after picking up one of the Lidl sets - fits together well but painting the camo is challenging! You've done a nice job on this one Matt 👍

    • @hattrick8684
      @hattrick8684 ปีที่แล้ว +2

      I built the 1/72 US kit a few weeks ago, I loved it. Had a blast building it, it was my second plane but solidified me on planes. They’re more expensive here 1/72 is usually 12-20 and 1/48 usually 30-50 USD. I got the 1/72 for $5 so can’t pass up those savings lol

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Thanks! I really wanted to pick a tomahawk up from Lidl recently, but sadly it would seem the local shops near me didn't have any of them in stock

    • @tail_lamp7538
      @tail_lamp7538 ปีที่แล้ว

      Where did you get the painting masks from please?

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      @@tail_lamp7538 hannants, there is a link in an earlier comment

    • @leewhite2195
      @leewhite2195 ปีที่แล้ว

      Just found out via a modelling forum that the Airfix Neville Duke Tomahawk starter kit should have a red nose cone.

  • @pandaphil
    @pandaphil 11 หลายเดือนก่อน

    Nicely done sir! Definitely on my "one of these days" kits. So much nicer than the old Monogram kit.

    • @ModelMinutes
      @ModelMinutes  11 หลายเดือนก่อน

      I totally agree!

  • @WayneWelly
    @WayneWelly ปีที่แล้ว +2

    Another great job you done

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thank you! Cheers! It was such a fun build (apart from when I lost motivation with that camo, but the masks brought it right back!) Would you get one of these?

    • @WayneWelly
      @WayneWelly ปีที่แล้ว +2

      @@ModelMinutes in the future probably get one to add to my ever growing stash

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      @@WayneWelly sounds good!

  • @Gremlins_Modelling_Mayhem
    @Gremlins_Modelling_Mayhem ปีที่แล้ว +3

    Hi Matt, yet again, a great build, I've just built the 1/72 version. Also can you post a link for where you got those masks as I've got a couple of 1/48 tropical builds coming up over the next few months

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      I got mine from Hannants www.hannants.co.uk/manufacturer/aml?product_type_id=2724&search_direction=asc&scale_id=955

  • @ingosippel9653
    @ingosippel9653 ปีที่แล้ว +2

    Yes,for me the best scale and the Tomahawk is for me one of the beautyfulest planes.
    I like more than Mustang or Thunderbold

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      me too!

    • @ingosippel9653
      @ingosippel9653 ปีที่แล้ว +2

      @@ModelMinutes 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      @@ingosippel9653 :D

  • @epicforger12345
    @epicforger12345 ปีที่แล้ว

    Those paint masks are cool I’ll have to check them out.
    Also if you are having issues painting camo free hand don’t worry I find it incredibly difficult too I would reccomend getting some masking putty for doing camos

  • @veronikakucerova6595
    @veronikakucerova6595 9 หลายเดือนก่อน

    I done my first airfix model titanic 1:700 because my 5 years old boy is crazy about titanic..It was amazing experience and I'm in love now but I have to say pieces were missing I was quite sad..Also the planes look easier to build I'm gonna try that next😊.
    Nice video thank you😊

    • @ModelMinutes
      @ModelMinutes  9 หลายเดือนก่อน

      I find that planes have different areas that can make them difficult - particularly landing gear, cockpits and the clear parts. Perhaps a vehicle or some kind of armour might be a good alternative?

  • @greggregson9687
    @greggregson9687 ปีที่แล้ว +2

    I have bought every Airfix P-40 Tomahawk kit since they brought them out not long ago. The 1/72 versions were all perfect, even though the Pearl Harbour version has quite a boring scheme. The 1/48 versions are also excellent to put together (as you know), but the first release with the flying tiger/pearl harbour scheme had a huge flaw; the flying tiger decals national insignia don't have enough points on them! Since that was the version I wanted to do, it was very frustrating. I had to do the boring pearl harbour scheme, so my advice for anyone looking at this kit, is make sure the decals have the correct insignia before purchase (unless you have replacements, or want to do the pearl harbour scheme).

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      ah, that is an interesting point about those decals! Perhaps you could get some aftermarket ones which are a bit more accurate?

    • @greggregson9687
      @greggregson9687 ปีที่แล้ว +1

      I could have, but then it would have blown out the costs. Unfortunately, aftermarket decals in my country are very expensive, virtually the price of the kit @@ModelMinutes

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      @@greggregson9687 ah that’s a shame

  • @buffalo_yt9245
    @buffalo_yt9245 ปีที่แล้ว +2

    any update on the GB video? how is it coming along?

  • @matickocevar1053
    @matickocevar1053 ปีที่แล้ว +2

    You shuold try wethering with oil paints but I love the resoult great build

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Yes, Oil paint is something I don't use too often, but do have some supplies to do it so may look into that more in the future

    • @matickocevar1053
      @matickocevar1053 ปีที่แล้ว +2

      It looks hard but it actualy isn't. I was scared to use them but once i tried i use them for nearly all of the effects

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      @@matickocevar1053 I think i just need a bit more practice :D

  • @Andy.Gledhill.Models.
    @Andy.Gledhill.Models. ปีที่แล้ว

    You have produced a nice looking model there Matt. Although at times, I do think you are a little messy with the glue and painting. I think sometimes you don't pay enough attention to parts clean up. Some sprue nibs and bad seams can still be seen. I was also wondering why you painted the cockpit using brush painting. You have an airbrush. I think you would have got a smoother finish if you sprayed on the cockpit green colour. But overall, it does still look good. Well done.

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thanks, I hand painted the cockpit because it was quicker and would mean less time spent cleaning the airbrush. The less than perfect finish isn't really an issue given that the cockpit cant really be seen with the canopy closed and a pilot in there

  • @piloto5248
    @piloto5248 ปีที่แล้ว +1

    Job well done.........!!

  • @chrisneville9665
    @chrisneville9665 ปีที่แล้ว +1

    Having watched most if your vids now, I think this is hands down the best finished model you've ever made! Glad to see you trying more varied paints too. I gave up on Humbrol years ago and never looked back. Would like to try their new gen of paints though

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Thanks very much! I’ve got a airbrush review test of the new humbrol gen2 paints coming soon

  • @ericbeaton7211
    @ericbeaton7211 4 หลายเดือนก่อน

    I really enjoyed the video and your explanation of the build. I have just bought the latest release of the P-40 direct from Airfix. My thinking behind buying the kit was that by building it as the photo recon version it would provide an alternative to the Trumpeter and Bronco kits that I already own. Here is my problem though, the current kit decals are for an RAF Bomber Defence Training Flight or for a Turkish Airforce version of the Tomahawk Mk II. Neither set of decals represent a photo reconnaissance version of the Tomahawk Mk II and a quick search on eBay would suggest that no one manufactures appropriate alternative decals. I can understand Airfix providing fresh decal options for the kit but why not provide decals that are appropriate for the options the kit provides ?

    • @ModelMinutes
      @ModelMinutes  4 หลายเดือนก่อน +1

      This version of the kit did provide decals for a photo-recon variant, so if you wanted to build that version you would need to get this boxing. Model kit companies rotate the decal schemes they include with their kits in different releases because it encourages repeat or new sales of the model, keeping the kit with one scheme throughout its life severely limits sales and reach. Just because a kit was tooled with different variants in mind as options, doesn't mean they have to fulfil those options everytime they release it - it does clearly state on the Airfix website which schemes are included in the current boxing. If you cant find a specific scheme of decals (or the previous boxing) on sale, it may be possible to replicate a scheme using generic roundels, ID letters and registration codes from such aftermarket decal sheets if you had a particular aircraft you wanted to replicate

  • @garybarham3992
    @garybarham3992 ปีที่แล้ว +1

    What 3D printed stand did you use? As a novice I’m struggling to find suitable stands for 1/72

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      Check the link in the description, pretty sure I put it there?

  • @ja37d-34
    @ja37d-34 ปีที่แล้ว +1

    Been thinking about getting that model since release... Love the Tomahwaks..

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +2

      If you can find one, it is definitely worth it! I'm actually a little annoyed I didn't get the Pearl Harbour version as well

    • @ja37d-34
      @ja37d-34 ปีที่แล้ว

      @@ModelMinutes Yeah, been eyeing that for a while.. Was ina store here, might be gone now though..

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      @@ja37d-34 🫠😔

  • @michaeldenesyk3195
    @michaeldenesyk3195 ปีที่แล้ว

    Excellent build, was there a gunsight or antenna wire on the Tomahawk?

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      the gunsight was of the reflector kind in the cockpit - as for aerials, i think there was some running from the wing tips to the tail, but not something i decided to add

  • @veronikakucerova6595
    @veronikakucerova6595 9 หลายเดือนก่อน

    Can I also ask what glue you guys using. I didn't find the glue in kit very good. I'm beginner so every tips and tricks are welcome..Thank you 😊

    • @ModelMinutes
      @ModelMinutes  9 หลายเดือนก่อน

      Full product list used in this video is shown on the screen at 01:00. Glue used is shown at 01:20

  • @elliotsgarage16
    @elliotsgarage16 ปีที่แล้ว

    Great job! But I have a question, is one 1/48 model noticeable in a collection of 1/72 models? Thank you!

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      Thanks! Yes, if I had other 1/72 fighters like spitfires and mustangs, then this P40 would be twice the sizeand take up twice the space, standing out on the shelf

  • @おおたにまさあき
    @おおたにまさあき ปีที่แล้ว +1

    このキットが出る迄はモノグラムのキットが君臨していました。
    好きな飛行機でもあり、傑作機の1つだと思います。
    ぜひ手に入れたいキットです。

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      Translated into English:
      Until this kit came out, monogram kits reigned supreme.
      It's my favorite airplane, and I think it's one of the masterpieces.
      This is a kit that you definitely want to get.
      Reply:
      Thanks! Yes, this is certainly a great kit to build! I have a number of P40s and I don't imagine I'll stop buying them! Thanks for watching!
      ありがとう!はい、これは確かに素晴らしいキットです。私は P40 を何台も持っていますが、購入をやめるつもりはありません。見てくれてありがとう!

  • @digegr61
    @digegr61 ปีที่แล้ว

    Hi where did you get your stand from

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว

      I got it here: Airplane model stand by MichalW www.thingiverse.com/thing:3347277

  • @hfdennycheng9010
    @hfdennycheng9010 10 หลายเดือนก่อน

    IN 2015, I HAD MADE A P-40C OF HASEGAWA MODEL IN 1/48 SCALE. IT IS ORIGINALLY A MODEL P-40C OF ROYAL AIR FORCE IN NORTH AFRICA. THEREFORE, IT HAS A SHARK HEAD DECAL BUT I MADE IT AS A P-40C OF THE FLYING-TIGER IN CHINA DURING WW2

    • @ModelMinutes
      @ModelMinutes  10 หลายเดือนก่อน

      nice!

    • @hfdennycheng9010
      @hfdennycheng9010 10 หลายเดือนก่อน

      FIRSTLY, THE BRITISH PILOTS IN NORTH AFRICA, THEY DREW THE SHARK HEAD ON THEIR P-40 PLANE. THEN, THE PHOTOS SHOWED ON THE NEWSPAPERS AND THE AMERICAN PILOTS IN CHINA, THEY FEELED IT IS A GOOD IDEA. THEY COPIED THE SHARK HEAD ON THEIR P-40C. BUT THE CHINESE MISTOOK IT IS A TIGER HEAD. THEREFORE, THIS AMERICAL VOLUNTEER AIR FORCE IS CALLED FLYING TIGER

  • @LuisVazquez-hx3bk
    @LuisVazquez-hx3bk 8 หลายเดือนก่อน

    I want to put an electric motor to give animation for the propeller.😊

    • @ModelMinutes
      @ModelMinutes  8 หลายเดือนก่อน

      I built a whitley where I motorised it

    • @LuisVazquez-hx3bk
      @LuisVazquez-hx3bk 8 หลายเดือนก่อน +1

      @@ModelMinutes
      I used to build modes in the US Army for my recon classes. It was better than the playing cards. I became an expert in Soviet and Chinese armored vehicles.
      I think I'm going back to build models again.

  • @MartinsTrainsAdventures
    @MartinsTrainsAdventures ปีที่แล้ว +2

    how many p 40s do you need hahaha

    • @ModelMinutes
      @ModelMinutes  ปีที่แล้ว +1

      Maybe a couple more? 😂