3 Habits That Can Damage Your Byrna!

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ม.ค. 2025

ความคิดเห็น • 122

  • @OcotilloTom
    @OcotilloTom 19 วันที่ผ่านมา +2

    Good info. I use mine for home defence and it sits on my night stand loaded with 5 rounds and a fresh un punctured CO-2 cartridge. I also change out the magazine each week to prevent the spring in the magazine from becoming compressed. Something I learned in the Marine Corps.

    • @airgunnerreviews7888
      @airgunnerreviews7888  19 วันที่ผ่านมา

      I alternate my magazines for the same reasons! Thanks for dropping by!

  • @blackpowderpapa
    @blackpowderpapa ปีที่แล้ว +18

    Yes, I have tested all of my byrnas and they will hold an extra round. There is no way I would make it a common practice though. I figure the people that designed it know exactly what should be in there. Just because it fits doesn't mean you should utilize it that way. Great video as always.

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +2

      I totally agree! Nice to see you’re still hanging around, do you still use your Defender? I have come to the realization you have to charge the cartridges every week or so to keep them reliable. Wait until you see a few videos I have planned for the Defender I have been working with a friend and he has made some huge improvements! How about the barrels actually fitting without wrapping tape around them and a piccitiny rail on bottom for a laser or light instead of the top and the useless laser that is built in. improved front sight and 3 different sizes including a compact which is 1” shorter than the original and if that’s not enough we are also working on a 68 cal less lethal that shoots Grimburg D shaped 7.5 gram projectiles. Just take your old outdated barrel receiver off and slap on the new and you’re good to go! They will be for sale soon!

  • @bobv7753
    @bobv7753 ปีที่แล้ว +10

    It's just too easy for me to just follow the instructions to support what the unit designed for. I have the LE. It cost enough and I don't want to damage it or compromise performance. Thanks for emphasizing this. Appreciate your content. Thank you!

  • @generalesdeath5836
    @generalesdeath5836 17 วันที่ผ่านมา +1

    Thank you for the advice. I just ordered my first Byrna SD.

  • @Joreel
    @Joreel ปีที่แล้ว +10

    Finally someone else says the same things I've said in other channels where I get mocked for saying these things.
    Now that the improved 7 round magazines have been our for a while and no one is complaining of them breaking things, I can finally free safe ordering a few for our two Byrna.
    I actually contacted Byrna about oiling every 500 rounds because their CO2 cartridge boxes ship with 9 regular and 1 oiler cartridge for your Byrna. I asked them why do we need to use an oiler cartridge after 180 rounds if they recommend oiling it after 500? They told me to used the oiler cartridge at either 500 rounds or if I feel like the launcher is starting to feel like it's not shooting as it should.
    How clean you keep your Byrna and the ammo you use will affect how quickly gunk can build up which the oiler cartridges help to clean out and keep the internal lubed.
    Just FYI, I based by numbers on 5 rounds per clip, 4 clips per CO2 (anything after 20 rounds is too weak to count), and 9 CO2 per box (saving that 10th oiler cartridge for later use). 5*4*9=180 🥺

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      I agree I think 500 rounds between oiling/cleaning seems to be too long and I never go past 3 seven round clips myself. I will probably stick to around 180 shot’s between maintenance to be on the safe side. Thanks for watching!

  • @SeanChristopherMcGee
    @SeanChristopherMcGee ปีที่แล้ว +1

    Thanks for the video! I just found you on youtube and will watch more. I don't know if you mentioned this in another video yet but on here you mentioned about the lubrication....Byrna actually found a way to do this from the CO2 cartridge. The one I had or have from Bryna has 8 cartridges in the box but one is lightly labeled "Oil" So after the 500 rounds or so you can place this CO2 cartridge labeled 'Oil" and use it normally. Supposedly it will oil the mechanisms.

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      For some reason I totally neglected to mention the C02 oiler thanks for your input and for stopping by!

  • @simplyodd24
    @simplyodd24 ปีที่แล้ว +9

    Ive watched a lot of your videos over the last day as I get ready to get my LE. I appreciate the tips as I was wondering if you could chamber one and then load the mag back up. Its good advice, they're pretty pricey, and of course the last thing I want to do is get a jam in a moment of need because i tried to squeeze another round in which is the biggest take-away for me.

    • @SeanChristopherMcGee
      @SeanChristopherMcGee ปีที่แล้ว

      If you chamber and then throw in a mag...It could jam up the mechanism and me personally would not advise it. The mag will still try and chamber a round regardless if one is there or not, so you are right it may jam in a time of need......theoretically speaking :-)

    • @kamakuro2
      @kamakuro2 ปีที่แล้ว

      I would just get an X-tra extension you’ll be able to hold more rounds and the jam isn’t an issue 🙏 I just ordered mine plus a “bigger” spring 😇😬

  • @neitzsche5150
    @neitzsche5150 ปีที่แล้ว +2

    Great video. Thanks for sharing important points to keep in mind.

  • @johnrushman1586
    @johnrushman1586 3 หลายเดือนก่อน +2

    Modified for paintballs. Works great 👍

  • @JackofNothingess
    @JackofNothingess ปีที่แล้ว +4

    You are correct about the 5+1 and 7+ 1 arrangement, and byrna does not recommend using such load outs. Of course, the one thing they didn’t count on is that certain balls are slightly undersized, and when loaded in a magazine it will give it the margin the barrel and chamber needs to add the +1.
    And of course, it is definitely not recommended to load +1 with anything other than kinetics. Pepper or gas payloads may crack under the extra stress. I’m still doing further tests into the efficacy and reliability of the +1 with and without chem loads, results pending. And finally, YMMV
    Thanks for sharing your thoughts!

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว

      Hey keep us posted on results! Thanks for watching

    • @JackofNothingess
      @JackofNothingess ปีที่แล้ว

      @@airgunnerreviews7888 The other day I had a duke plus OC ball leak in a 7-rd magazine, and I had it loaded with 1 kinetic, 5 OC, and 2 kinetic. I may have to adjust the spring tension on it.
      I also swapped out the Duke OC with another Kinetic. Here goes nothing

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      Well that sucks! You’re the first person commenting that the Duke rounds leak I was hoping they had stronger shells than Byrna. I think the extra round in the chamber really compresses the spring I have mine loaded with 5 OC and 2 kinetics on top with no extra round in the chamber and it’s been months without a leak. Hopefully I didn’t just jinx myself 🙏🏻

    • @JackofNothingess
      @JackofNothingess ปีที่แล้ว +1

      @@airgunnerreviews7888 the Duke balls are quite good, IMHO. I think loading 7+1 is strongly not recommended, and I loaded it with 7+1.

    • @JackofNothingess
      @JackofNothingess ปีที่แล้ว

      Another update: last time I reported that I got a leak with Duke Plus PAVA rounds, and I failed to mention I loaded 8 rounds total in the magazine, since the kinetics were just undersized enough to fit one more and tried 8+1 into my SD. Obviously that went over the load force limit and it leaked out.
      Since then, I managed to get 10rd extenders from Wixon’s shop and I was better able to load 6 Duke Plus in it with 3 kinetics no problem. I didn’t want to overload it and cause the 6 rounds to break or leak, as that would be a big and expensive mess to clean up, so I loaded up 9 rounds total. And, I didn’t load the Duke Plus rounds at the bottom, as they will roll on each other and could crack the seams if there’s too much spring pressure. So far so good. The key is not to overload the magazines and put too much force on the chem rounds that they leak.

  • @brianhoefer7148
    @brianhoefer7148 ปีที่แล้ว +4

    Byrna has an oiler CO2 cartridge.

  • @justinp913
    @justinp913 8 หลายเดือนก่อน +2

    Very informative, thanks for the heads up!

  • @michaelfridy7249
    @michaelfridy7249 7 หลายเดือนก่อน

    Just bought an LE,SD,and a TCR glad I watched this video. I used byrna co2 cartridges, but I used the oil pellgun, and overload the magazine. started having some issues firing. Now I know. It would be nice if the video was on BYRNA website. Just like how to fold the full-size target I purchased. Had a heck of a time figuring out how to fold that thing so I could get it back in the bag.

    • @airgunnerreviews7888
      @airgunnerreviews7888  7 หลายเดือนก่อน

      I purchased the Byrna small target when it first came out and bent the wires trying to figure out how to fold it! Funny how easy these things are to take out of the package and set up!!! Thanks for watching

  • @RandolphBrown-r7s
    @RandolphBrown-r7s หลายเดือนก่อน

    GREAT ADVICE. THANK YOU.

  • @shaunsunderland7223
    @shaunsunderland7223 ปีที่แล้ว +1

    I have Crosman i don’t use it only in my air pistols but I have lots of daisy i use daisy. no issues works good.

  • @stevepayton659
    @stevepayton659 5 หลายเดือนก่อน

    Guess I've been lucky 🤔 I've had a Byrna SD since the beginning. Took 6 months to receive it, made in S.A. Boost installed. Only Crossman, still working great.

  • @thumperthumper5322
    @thumperthumper5322 3 หลายเดือนก่อน

    Good tips . thanks for the info..

  • @cslate36
    @cslate36 ปีที่แล้ว +3

    I understand your point of view but of course they are only recommending their own products. Crossman probably doesn't recommend using anything from byrna.

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +2

      This could be very true! I purchased the Byrna brand and compared it to Umarex C02 and save your money! Byrna underperformed the chronograph test every time and is very expensive!

    • @williamharvey4270
      @williamharvey4270 ปีที่แล้ว +1

      The only 12 gram they warn about is Crosman. Most others are fine. Crosman QC is terrible and the caps are too thick on many and can cause issues. The Byrna CO2 packs are great though as they include an oiler cartridge that makes proper oiling so easy.

    • @Possum880
      @Possum880 ปีที่แล้ว

      I was thinking that myself, them not wanting people to use the cheapest and most readily available co2 cartridges which would be crosman, of course they would rather people by their own, it is interesting that crosman is the only one mentioned though. I’d still probably follow the maintenance guidelines that the manufacturer provides

  • @lostboyzracing8939
    @lostboyzracing8939 ปีที่แล้ว +1

    Shortening the spring just a little bit taking some of that tension off will make it so you can shoot 8 rounds out of it with no problem without that extra tension your talking about you can do the same thing with the 5 round magazine to keep them from cracking pepper balls in the magazine

    • @williamharvey4270
      @williamharvey4270 ปีที่แล้ว +2

      If you cut the 7 round mag springs, the mag will be useless and will no longer function due to the way that the spring mounts inside the 7 round magazine.

  • @malefanematsie3890
    @malefanematsie3890 ปีที่แล้ว +2

    Hi, bro after this video you really convinced me to subscribe your tips are spot on relevant to my HD, not only do you raise your opinion on this launcher, but also accurately refer to manual recommendations. As a new subscriber I'm looking forward to the rest of your videos. 🙏

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว

      Thank you for subscribing!!!

    • @malefanematsie3890
      @malefanematsie3890 25 วันที่ผ่านมา

      Now sir, is it compulsory to use strictly byrna mineral oil or can I use any alternative as long as it is mineral based or the same ingredients as byrna if so which alternative brand 🤔 Thanks in advance 🙏

  • @cvisconti4568
    @cvisconti4568 10 หลายเดือนก่อน +1

    I’m not sure about adding the extra round, but I do know that sometimes a round gets stuck up there and so people leave it there and then put the five extra rounds on top of that making it six rounds and yes… Stupid is as stupid does

    • @jonnieellisfitsol8035
      @jonnieellisfitsol8035 9 หลายเดือนก่อน

      It’s not that

    • @jonnieellisfitsol8035
      @jonnieellisfitsol8035 9 หลายเดือนก่อน

      There were no extra rounds. It was just the seven in the clip and I pulled the trigger and it just let all the gas out. I’m trying it with three more of them and every single time completely emptied it out and doesn’t even shoot.

  • @robertvogel9849
    @robertvogel9849 ปีที่แล้ว

    You also want to watch vibration around here equipment. I'm a truck driver so mine is always vibrated just from driving down the road all day long and the last time I went to use it the trigger wouldn't go back into place after pulling it. Right now it's a pile of parts waiting till I get home to put it back together because The part that is spring loaded that returns the trigger forward popped off so I had to take the entire gun apart to get to that part to put it back together. Very poor design. I don't know if it was from vibration or it just dropping because she fell off of the place that I hold her while I drive a time or two.

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว

      Good point thanks!

    • @BrilloHead
      @BrilloHead ปีที่แล้ว

      I think the Byrna pistols are over-engineered. I've had internal parts from the first LE fall out of the mag well, causing the safety switch to be wishy washy and no longer have that defined click. After another bigger failure with the CO2 piercing mechanism, I sent it back to Byrna. It was still under their 1 year warranty, so they fixed it and sent it back to me. Works fine for now.

  • @MatheP16
    @MatheP16 2 หลายเดือนก่อน

    Makes a lot of sense appreciate it

  • @johweyeh
    @johweyeh 8 หลายเดือนก่อน

    Thanks for sharing

  • @warchitect73
    @warchitect73 2 หลายเดือนก่อน

    OMG thanks for this video!

  • @drbell26
    @drbell26 10 หลายเดือนก่อน

    Thanks, I haven't purchased it yet. From all the videos I've watched I so was planning on storing an extra shot in that barrel. Thanks again

  • @dgriffin6074
    @dgriffin6074 9 หลายเดือนก่อน

    I had a Crosman CO2 BB rifle which came with a warning NOT to leave the CO2 cartridges in it because the seals could/would eventually leak and make it useless. Sure enough that happened, and I trashed the rifle. I don't recall any warnings about in the Byrna manual; does leaving the pierced CO2 cartridge in the SD pose a similar risk? If CO2 cartridges should be removed if the weapon is not fired shortly, that seems to be an unnecessary waste of the cartridges.

    • @airgunnerreviews7888
      @airgunnerreviews7888  9 หลายเดือนก่อน

      There is a caution highlighted in yellow on page 10 to always remove the CO2 cylinder after use. If cylinder is punctured and not removed, premature wear of the C02 seal will result in gas leak. I agree it is a waste! Thanks for watching!!!

  • @slingshotwarrrior8105
    @slingshotwarrrior8105 ปีที่แล้ว

    Good to, bro! I plan on getting one in the near future!

  • @JoulesElite
    @JoulesElite ปีที่แล้ว

    what are your thoughts on crosman co2 for umerix products? i was going to do a video on crosman and umerix

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      If you purchase a new box of Crosman C02 you may find they are a little shorter and do not puncture properly as the Umarex and sometimes they don’t puncture at all unless you crank the the striker real tight! Less lethal for dummies has a video on this also, good luck!!!

  • @carrow2250
    @carrow2250 8 หลายเดือนก่อน +1

    You’re thinking of the word “magazine”

    • @airgunnerreviews7888
      @airgunnerreviews7888  8 หลายเดือนก่อน +1

      I could hear you shouting at your screen😂

  • @brianhoefer7148
    @brianhoefer7148 ปีที่แล้ว

    The LE uses a larger CO2 cartridge.

  • @glynnjohnson3531
    @glynnjohnson3531 ปีที่แล้ว

    Makes sense thank you

  • @phillyspeaks
    @phillyspeaks ปีที่แล้ว

    Is it safe to dry fire your byrna without a co2 cartridge or ammo like you did in the video? Thanks for the video's brother 🙏

    • @BrilloHead
      @BrilloHead ปีที่แล้ว

      I don't see why you can't. But if you are drying firing CO2 without projectiles, I would avoid doing that. I've had internal parts fall out from the safety switch before.

  • @hiddenspeak
    @hiddenspeak ปีที่แล้ว

    hi , i just watchd your video and i was thinking why mineral oil instead of silicon oil , where did u get this conclusion u said "thats what they recommend.." they who? byrna?

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      Byrna offers their own oiler kit they recommend using and can be found under accessories on the Byrna website and the composition stated is mineral lubricant oil. I honestly don’t know what their reasoning would be over silicone but they must have one. Unlike Umarex and FSC there is no firing bolt to launch the projectile so perhaps this is the reasoning?

    • @malefanematsie3890
      @malefanematsie3890 25 วันที่ผ่านมา

      ​@@airgunnerreviews7888whilst at that point, do you think byrna makes it compulsory to use theirs only or can one use any alternative as long as it is mineral based or the same ingredients as in byrna oile if so which brand alternative can you think of 🤔

  • @peterwilliams2889
    @peterwilliams2889 7 หลายเดือนก่อน +8

    Non Byrna CO2 cartridges BAAAAD. Byrna CO2 cartridges, GOOD.

  • @southbayproducts5371
    @southbayproducts5371 9 หลายเดือนก่อน

    one more thing using the Co2 from Byrna they shipped me

  • @Strikeshotz
    @Strikeshotz 9 วันที่ผ่านมา

    After I used crossman my Byrna Le keep leaking air how do I fix this issues? Thanks

    • @airgunnerreviews7888
      @airgunnerreviews7888  9 วันที่ผ่านมา +1

      Ouch! I think that is a question for Less Lethal For Dummies (LL4D) he is much more knowledgeable than I am and has had his apart many times. Good luck! He has a great TH-cam channel!

  • @TekkWolf
    @TekkWolf ปีที่แล้ว +3

    #1: shooting it
    #2: drawing it from a holster
    #3: taking it out of the box
    😂

  • @southbayproducts5371
    @southbayproducts5371 9 หลายเดือนก่อน

    Hi I wish Byrna would show how much C02 you have this is my biggest concern when you need it I went to practice and no air I only used it 5x balls before used 2nd time

    • @airgunnerreviews7888
      @airgunnerreviews7888  9 หลายเดือนก่อน

      Byrna recommends not to store a pierced C02 in the launcher as it can damage the C02 seal. I have been purchasing Umarex C02 (12 gram) off of Amazon and it is much cheaper, there is also Mr. Fizz seltzer cartridges in 8 gram for the SD model also on Amazon. I have extensively tested both and are comparable to Byrna for a fraction of the price. You won’t mind wasting unused C02 as much, lol!

  • @justinstevens3364
    @justinstevens3364 ปีที่แล้ว +1

    What’s the difference if I have a standard five round mag with +1 compared to the seven round mag?

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว +1

      The 5 round and 7 round mags have different spring tensions. When you load an extra round in the barrel you are increasing the tension on the barrel spring that moves the barrel back and forward and overtime can lead to jamming problems and there is a decrease of power on the first shot which will be shown in my next video!

    • @lostboyzracing8939
      @lostboyzracing8939 ปีที่แล้ว

      Full power with the first shot as long as you puncture the CO2 on safety then fire the first shot

    • @BrilloHead
      @BrilloHead ปีที่แล้ว

      @@lostboyzracing8939 Yep, that's what I do, even for practicing.

  • @doddieb
    @doddieb 9 หลายเดือนก่อน

    ;Just received my byrna sd I fired 5 rounds and worked great. I removed clip and added another clip but I could not go from fire to safe mode. Now with a full Co2 can I remove the Co2. so I can maybe rest the safe mode. Need help. Steve

    • @airgunnerreviews7888
      @airgunnerreviews7888  9 หลายเดือนก่อน

      Hi Steve! At any point you should be able to flip the safety on and when you press the trigger a projectile should not fire, however I have noticed on mine the safety doesn’t move as freely between clips so it may feel like it is stuck so just give it a firm push. Good Luck!!! It is also ok to dry fire to release enough air to be able to loosen the C02 cap. There is no firing bolt in these so dry fire will not hurt the launcher.

  • @brr8888
    @brr8888 4 หลายเดือนก่อน

    I use crosman and silicone with no problems lol

  • @Fuffcat
    @Fuffcat 5 หลายเดือนก่อน

    I just got my byrna LE today. I only used a Co2 twice and now I'm noticing a slight rattle when I shake the model side to side (twisting motion). I don't think it rattled before.. is this normal?
    I will preface by saying I did not use all the gas, I popped it off twice and decided to retire the weapon. So I backed out the Co2 early (having prior knowledge of air bb guns). And I heard something pop. So I'm unsure if I caused damage by not using more air first. Nothing mentions this in the user guides

    • @airgunnerreviews7888
      @airgunnerreviews7888  5 หลายเดือนก่อน +1

      Hi there! First off you did nothing wrong! Releasing the extra air either by shooting or unscrewing the cap is fine. The pop noise could be the trigger resetting which is common when the extra air is exhausted. I own both the LE and SD and they both have a small rattle when you shake them but as long as it doesn’t sound like a part you should be fine. I would use it again today and shoot 3 mags and bleed off the extra air just to make sure.

  • @christopherramirez1070
    @christopherramirez1070 ปีที่แล้ว

    Thanks for the tips i just bought a byrna sd.

  • @baronsilverbaron757
    @baronsilverbaron757 ปีที่แล้ว

    Is the Byrna SD XL as powerful as the Umarex HDR 68 (16 joule)?

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว

      No the HDR has more power however arguably I feel the Byrna with Byrna Max chemical rounds is just as effective or more effective if the perp is wearing a jacket.

    • @pezpengy9308
      @pezpengy9308 ปีที่แล้ว

      i own three 20j umarex "guns" (stashed loaded in the various rooms around my house) and my brand new byrna is NOWHERE near as powerful. on the other hand, the little byrna is much smaller so it goes in my little bag that i carry daily.

    • @BrilloHead
      @BrilloHead ปีที่แล้ว

      If you want a Byrna that closely matches 16 J, get an LE. It's rated for that kind of power.

  • @gerardmcquade9102
    @gerardmcquade9102 ปีที่แล้ว

    that was very surprising

  • @1Docflash
    @1Docflash ปีที่แล้ว

    cant hear you volume is so low even with my speakers set to max

  • @jabbarwilson7012
    @jabbarwilson7012 10 หลายเดือนก่อน

    Great video! Thanks #FLINKO

  • @otrotland5377
    @otrotland5377 9 หลายเดือนก่อน

    wow thanks

  • @babiiluv22204
    @babiiluv22204 ปีที่แล้ว

    I JUST bought some Pelli gum oil 😫

    • @airgunnerreviews7888
      @airgunnerreviews7888  ปีที่แล้ว

      Sorry!

    • @babiiluv22204
      @babiiluv22204 ปีที่แล้ว

      @@airgunnerreviews7888 all good! At least I found out before I actually used it on my byrna. Thank you for all the tips! Much appreciated

    • @BrilloHead
      @BrilloHead ปีที่แล้ว

      @@babiiluv22204 The only time I use pellgun oil on my Byrna is right on the CO2 screw cap. Sometimes with repeated unscrewing and dropping on hard pavement, the screw cap can be difficult to screw back into the CO2 compartment. So what I do is add some pellgun oil to the screw threads, which makes it so much easier to screw the cap back into the CO2 compartment.

  • @HoodziHockey16
    @HoodziHockey16 9 หลายเดือนก่อน +1

    Cool toy

    • @MrJayehawk
      @MrJayehawk 8 หลายเดือนก่อน +1

      Not a toy.

    • @HoodziHockey16
      @HoodziHockey16 8 หลายเดือนก่อน

      @@MrJayehawk lol

  • @deadpool-xx4hp
    @deadpool-xx4hp ปีที่แล้ว

    love this guy