I’m sold. I was going to buy my daughter and her husband spinning reels and decent titanium guides rods for specs, reds, flounder run in the fall. My stinking X of 7 months stole all my curados, Calcutta and chronarch plus more hundreds $ in my huge tackle collection. Just need to start over everything again. Oh I’m fishing inshore around Galveston TX just off Gulf of Mexico. Thank you very much for the videos.
Just upgraded my Spheros SW3000XG with these bearings, great upgrade! I pushed a little too hard on the worm gear bearing so I had to reset the plastic gear inside, but your instructions were spot on.
I have shimanos from the Stella down to the nasci. I just got the 3000 myself for a car / pond hoping reel. How much of a difference does those bearings make ? Is it night and day.
Hi there from Israel, a nice upgrading video, what I really wanted to watch, is how to upgrade the line roller bushing into bearing system. do you thing it's possible ? it will be a major upgrade, and put this reel in the big reel league.
Where did you get the parts. I caught an40 lb cobia on my spheros I would love to do this upgrade u have 2 of them . That ball on handle would be nice for sure
Sup my man! Just letting you know your upgrade videos are awesome! Upgrades or DIY stuff is usually a hit. You're pretty good on explanations and experiences. You're my new Tackle Advisors channel. Another suggestion when buying new gear...always give a road test followup video or include it on the same review video. There's many youtubers that read the box and say how pretty it is, but don't use them on their experience. Guarantee you'll gain more subs...so go fight some fish my man!
Love your videos, is the upper worm gear bushing able to be swapped for a bearing on this reel? It seems since the Spheros SW 3K and 4K are retooled Stradic FK’s the upper worm gear bushing could be changed. If it can, do you know the part number for said bearing? Thanks 🙏
I’m not sure that a bearing can fit up there on the fK or the spheros… it seems the bushing that is at the upper worm gear is armed so I’m not sure a bearing would be a good idea here…
Tell me what isn't there to like about your channel. Bravo once again. I wonder if you could do a bearing upgrade in the new saragosa. The reviews say it is smooth, we'll give it to you and it will become super SMOOTH!!!!!
Just watched a guy disassemble a stradic and a spheros , the body's interchanged perfectly the only difference between them are a few bearings and bail wire
assuming you messed with the reel a bit before the upgrade have you been able to noticed any distinct improvment in smoothness when messing with it now. like how does each bearing affect feel individually
I'm ordering these pieces now cause I definitely wanna make this mod, but something else I would add to make the handle that much smoother is an extra shim between the bearing and the drive gear cause the ones they provide from the factory or a fraction too small cause a little bit of handle wiggle.
Hi, friend! excellent work! I just bought this reel and I want to replace the bearings, could you pass me the measures to try to get it in Argentina? Thanks
Hi there from Israel, a nice upgrading video, what I really wanted to watch, is how to upgrade the line roller bushing into bearing system. do you thing it's possible ? it will be a major upgrade, and put this reel in the big reel league.
It depends on a lot of things… does it create another fail point for saltwater? Answer: Yes! But if you add a thin layer of grease to the bearing doesn’t that make it water resistant? Answer: Yes! There are multiple things that make a saltwater reel designed for saltwater and increased sealing is one of them. This is the exact tradeofff that you are doing when upgrading bushings to bearings! So choose wisely!
Hi, GREAT VIDEO!!!! Is this upgrade also possible for Shimano Sahara 1000 (2002)??? So yes, can i measure up the plastic bushings/bearings and replace them with suitable size stailess steel bearings, or do i need the original Shimano bearings? Thanks, greetings from The Netherlands.
Hello, firstly I would like to share my happiness. It is easier than my expectation, I appriciate for clear explanation. Can I use same bearing for 5000 or 6000 size ? Is this standart bearings for all sizes of spheros or change with size by size
It is very possible to swap the handle from left to right on this reel. Simply unscrew the handle and screw it back in on the right side of the reel, removing the cap and replacing it on the left side of the reel.
Sometimes it is preferred to have nylon bushings in areas of low sealing to ensure the bearing doesn't corrode or fail where the bushing isn't a large factor impeding smoothness or refinement! I hope I explained that well enough!
Hi… Nice work gere! Really great!!! I have onero those Reels and i would like to upgrade mine as you did gere. However link for Gomexus power knob seems wrong, no page/article is displayed. Could you please provide new link? You got a new subscription for your Chanel. Cheers!
Nice man 😊🤙🏽 How is that reel holding up? Considering grabbing a 3000 for some lighter inshore fishing. Also did the bearing upgrades make a big difference for ya? I love this stuff haha I take reels apart all the time it’s just relaxing 🤷🏻♂️😎😁
What was the total cost of the bearings including shipping? What reel would be the upgraded version of this? Would that cost be added into a newer upgraded reel purchase and avoid this ?
It makes it a little bit smoother but most might not feel a huge difference. I wouldn’t say you have to upgrade the bearings with other bearings for the price of the reel it’s not necessary!
Thank you for this video. Couple questions. It looked like you used Shimano replacement parts. Does boco make the same bearings? Will this upgrade help the reel fish better/last longer? Also have you ever used any of the replacement knobs from smooth drag, was wondering which one would fit...?
Yes they do but you would have to just enter the bearing dimension size instead of the shimano part number reference. I believe it would make the reel last longer as you swap nylon bushings that degrade over time into a replaceable bearing part! I have not used their handles unfortunately. Thanks for the nice comment! I hope I helped!
Bro, I just saw the ultegra FC specs last night. Made me think of you. Are you as excited about this thing as I am? The features keep trickling down the stack.
The 38mm and it can be bought right here: Gomexus Power Knob (38MM) : rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FGomexus-Reel-Knob-For-Shimano-Stradic-Daiwa-Spinning-and-Baitcasting-Reel-27mm%2F283934677525%3F_trkparms%3Daid%253D111001%2526algo%253DREC.SEED%2526ao%253D1%2526asc%253D20160908105057%2526meid%253D4b2992f9c8b44e77a364639143a4ac4e%2526pid%253D100675%2526rk%253D5%2526rkt%253D15%2526mehot%253Dnone%2526sd%253D273058835431%2526itm%253D283934677525%2526pmt%253D1%2526noa%253D1%2526pg%253D2380057%2526brand%253DShimano%26_trksid%3Dp2380057.c100675.m4236%26_trkparms%3Dpageci%253A67b1c1d0-0721-11eb-8e60-be6cb3681b15%257Cparentrq%253Af96de11f1740aaecad70de02fffcfe9c%257Ciid%253A1&campid=5338690692&toolid=10001&customid=Gomexus
I’m sold. I was going to buy my daughter and her husband spinning reels and decent titanium guides rods for specs, reds, flounder run in the fall. My stinking X of 7 months stole all my curados, Calcutta and chronarch plus more hundreds $ in my huge tackle collection. Just need to start over everything again. Oh I’m fishing inshore around Galveston TX just off Gulf of Mexico. Thank you very much for the videos.
Just upgraded my Spheros SW3000XG with these bearings, great upgrade! I pushed a little too hard on the worm gear bearing so I had to reset the plastic gear inside, but your instructions were spot on.
I have shimanos from the Stella down to the nasci.
I just got the 3000 myself for a car / pond hoping reel.
How much of a difference does those bearings make ? Is it night and day.
One more bearing in roller .YOU DONE A NICE YOB!
You’re totally right! Thanks for the support and nice comment brother!
Hi there from Israel, a nice upgrading video, what I really wanted to watch, is how to upgrade the line roller bushing into bearing system.
do you thing it's possible ? it will be a major upgrade, and put this reel in the big reel league.
I think you would need a ceramic bearing though because the stainless steel ones would rust
@@brodiemathews5139 that’s why they didn’t put a rollerbearing in per a Shimano rep I spoke to.
Thanks for keeping your word in doing the spheros. By the way magnets don’t work on stainless steel screws. If my memory serves me
You might be right! Didn’t think about that! Thanks for the support man! And you’re welcome I had it coming for a while!
Did it to both my 4000 spheros. They were 5 years old and looked great inside but I'm always looking to make them better.
Where did you get the parts. I caught an40 lb cobia on my spheros I would love to do this upgrade u have 2 of them . That ball on handle would be nice for sure
Sup my man! Just letting you know your upgrade videos are awesome! Upgrades or DIY stuff is usually a hit. You're pretty good on explanations and experiences. You're my new Tackle Advisors channel. Another suggestion when buying new gear...always give a road test followup video or include it on the same review video. There's many youtubers that read the box and say how pretty it is, but don't use them on their experience. Guarantee you'll gain more subs...so go fight some fish my man!
Very informative however I need schematic for replacement handle and power knob can you help sp4000xgsw,
There should be the schematic on fishshop.shimano.com >parts>spinning>spheros Sw! Good luck!
good brother,Thank you,your video made my experience better

Hey Dude! can Shimano SPHeros 2021 sw5000xg upgrade bearing to? thank u
Where did you get the parts. Please let me know i have been searching cant find anything
Love your videos, is the upper worm gear bushing able to be swapped for a bearing on this reel? It seems since the Spheros SW 3K and 4K are retooled Stradic FK’s the upper worm gear bushing could be changed. If it can, do you know the part number for said bearing? Thanks 🙏
I’m not sure that a bearing can fit up there on the fK or the spheros… it seems the bushing that is at the upper worm gear is armed so I’m not sure a bearing would be a good idea here…
Hi, good informative video. But I think it useless to change bearing if they are working as intended.
Tell me what isn't there to like about your channel. Bravo once again. I wonder if you could do a bearing upgrade in the new saragosa. The reviews say it is smooth, we'll give it to you and it will become super SMOOTH!!!!!
Great question I was wondering the same thing
@@Popareeno 👍👍👍👍👍
Haha thanks man! You've been a fan for a while now and it hasn't slipped my mind! Appreciate all the love and support!
Thanks Brother lovin the support!
@@WestCoastFloridaFishing 💖🎣🇺🇸👍
Very nice and thank you for your help , so can you give me the sizes of the bearings in the shimano spheros sw 3000 hg reel please.
I don’t have the exact sizes I’m sorry! I will work on putting the sizes in the description soon!
Just watched a guy disassemble a stradic and a spheros , the body's interchanged perfectly the only difference between them are a few bearings and bail wire
assuming you messed with the reel a bit before the upgrade have you been able to noticed any distinct improvment in smoothness when messing with it now. like how does each bearing affect feel individually
For Gomexus power knob your link become not correct.Could you please provide new link?
Yes I will fix the link in a few minutes thank you for letting me know!
Trouble. Think I put brass nut upside down. Can’t get off. Small white plastic piece came off. I’m lost now
Glad we figured it out!
I'm ordering these pieces now cause I definitely wanna make this mod, but something else I would add to make the handle that much smoother is an extra shim between the bearing and the drive gear cause the ones they provide from the factory or a fraction too small cause a little bit of handle wiggle.
Yep I sometimes shim this out for less handle play but I felt this reel wasn’t bad with the factory shims! Thanks for the comment dude and good luck!
Hi, friend! excellent work! I just bought this reel and I want to replace the bearings, could you pass me the measures to try to get it in Argentina? Thanks
I will be measuring from now on in all my future videos!
Sorry can i know how many meters can fill inside the spool n what diameter of braided line
You can probably fit about 200yards of 10lb braided line for a 3000 size and the 4000 you can hold 250yards if 15lb braid
Any new link for the knob?
One definitely to add is Cals drag grease way smoother than stock
shim under bushing at end of clip belongs where?
I feel like my spheros 4000 is extremely hard to turn under load, will this fix that issue or do I have a lemon?
Lemon Cake it sounds like brother.
Hi there from Israel, a nice upgrading video, what I really wanted to watch, is how to upgrade the line roller bushing into bearing system.
do you thing it's possible ? it will be a major upgrade, and put this reel in the big reel league.
It’s probably possible but I haven’t tried it yet!
Won’t changing plastic bushings to metal shielded bearings reduce the salt resistance dramatically?
It depends on a lot of things… does it create another fail point for saltwater? Answer: Yes! But if you add a thin layer of grease to the bearing doesn’t that make it water resistant? Answer: Yes! There are multiple things that make a saltwater reel designed for saltwater and increased sealing is one of them. This is the exact tradeofff that you are doing when upgrading bushings to bearings! So choose wisely!
Man I took mine apart and I had a pin fall out that I don’t know where it goes
Good video, This bearing upgrade possible to solved the scream noise? Thanks.
hello! what number of line did u put in it?
I believe I had 15# Suffix 832 Branded braid line on this reel of mine. Thanks for watching!
Hi, GREAT VIDEO!!!! Is this upgrade also possible for Shimano Sahara 1000 (2002)??? So yes, can i measure up the plastic bushings/bearings and replace them with suitable size stailess steel bearings, or do i need the original Shimano bearings? Thanks, greetings from The Netherlands.
No I don't believe it is the same design unfortunately... Thanks for the comment and greetings!!
Hello, firstly I would like to share my happiness. It is easier than my expectation, I appriciate for clear explanation. Can I use same bearing for 5000 or 6000 size ? Is this standart bearings for all sizes of spheros or change with size by size
For shimano spheros sw 3000 too?
That I am unsure about unfortunately!
How did you know which size ball bearing to get. I have this same reel in a 3000.
I haven’t tried it on a 3000 yet but you would measure the bushings and replace them with the correctly sized bearings
Is it not possible to swap handle from left to right side on this reel?
It is very possible to swap the handle from left to right on this reel. Simply unscrew the handle and screw it back in on the right side of the reel, removing the cap and replacing it on the left side of the reel.
can i use same bearings on 3000 model?
can I buy directly to you the ball bearing for Shimano Spheros 3000XG so it is easy for me to received it?
Hi, do you know if exis a compatible one-piece arch for shimano spheros sw 4000?
Hmm I can’t say for sure if it’s compatible but I don’t think it is..
Liked/subscribed….Absolutely beautiful colors on the reel, but I like the sealing. I like the saragosa as well of course
Great video as always. Do you know if I can use the same bearings for a spheros 6000 SW???
I do not believe so!
Another great video
Thank you so much for your support and nice comment!!
OK...So what rationale behind Putting a BB in the Shaft? The Shaft doesnt rotate so that bushing is nothing more than a spacer no?
Who knows! The oscillating motion was enough to be in the big brother so I went for it!
How does rye amount of ball bearing affect this reel compared to the Nasci which has more, are there benefits to having fewer ball bearings?
Sometimes it is preferred to have nylon bushings in areas of low sealing to ensure the bearing doesn't corrode or fail where the bushing isn't a large factor impeding smoothness or refinement! I hope I explained that well enough!
Hi…
Nice work gere! Really great!!! I have onero those Reels and i would like to upgrade mine as you did gere. However link for Gomexus power knob seems wrong, no page/article is displayed. Could you please provide new link?
You got a new subscription for your Chanel.
Cheers!
can you put the BB in the existing knob?
I believe so, yes!
What is upgradeable in the Twinpower FD?
I’m not sure but it’s already in good standing I wouldn’t touch it!
@@WestCoastFloridaFishing Apparently the only worthwhile replacement is part number 021 in the stella.
I didn't bother
can you do a Shimano saragossa upgrade please
I’d love too! I’ll mark it down on the to do list!
Every gomexus handle i get alway become loose and fall of when i use it. Dont know why
huh... maybe try some blue Loctite on it to keep it secured better?
Nice man 😊🤙🏽 How is that reel holding up? Considering grabbing a 3000 for some lighter inshore fishing. Also did the bearing upgrades make a big difference for ya? I love this stuff haha I take reels apart all the time it’s just relaxing 🤷🏻♂️😎😁
Are the bearing sizes the same for the 3000 do you know by chance? Or where do I find that info. Wana upgrade mine
What size is the bushing in the gearbox?
21 spheros sw 6000pg can do like this also？
I am not sure about this one...
thats reel spheros 4000 xg 2019?
You got it dude!
can I buy a bearing directly to you so it is easy for me to received it?
What was the total cost of the bearings including shipping? What reel would be the upgraded version of this? Would that cost be added into a newer upgraded reel purchase and avoid this ?
Around $50 seems about right. These upgrades are only if you want to make the current reel you have, smoother.
Is it the same for the 5K?
Yes but there is no 5k! They haven’t made a 5k size for this reel available yet!
Great video!!! How much smoother does this make the reel? Is it advisable to upgrade the main pinion bearing?
It makes it a little bit smoother but most might not feel a huge difference. I wouldn’t say you have to upgrade the bearings with other bearings for the price of the reel it’s not necessary!
hey mate, what size was the handle ?
im new here.. done subcribe and i have one question . it shimano nasci 3000hg can upgread bearing too?
I’m not sure about that model but I will be doing an unboxing and upgrading on the new 2021 Nasci!
I have a shimano shperos 3000xg I want to upgrade like you did. What type of bearing and what size do you use?
Everything is in the video description!
Shimano Sahara upgrade??
Hmmmmm 🤔🤔🤔
is it the same parts # for 3000 size
i want to know that!!
Nope 3000 size shimano reels are the same as Shimano 2500 size reels just with extra drag and line capacity and with a different handle
It is not the same size as the 3000 size spheros! They are different sizes!
You got it!
Unfortunately they’re not the same part numbers
the Gomex comes with bearings right? Are the Shimano bearings worth other extra $16- $20?
Yes they do come with bearings but they are very very cheap and actually make it worse than bushing!
Thank you for this video. Couple questions. It looked like you used Shimano replacement parts. Does boco make the same bearings?
Will this upgrade help the reel fish better/last longer?
Also have you ever used any of the replacement knobs from smooth drag, was wondering which one would fit...?
Yes they do but you would have to just enter the bearing dimension size instead of the shimano part number reference. I believe it would make the reel last longer as you swap nylon bushings that degrade over time into a replaceable bearing part! I have not used their handles unfortunately. Thanks for the nice comment! I hope I helped!
Bro, I just saw the ultegra FC specs last night. Made me think of you. Are you as excited about this thing as I am? The features keep trickling down the stack.
I saw that man! Just wait until I get my next two videos out 😁😉
Do you do Daiwa also ?
I have not tried anything other than Shimano so far!
Should totally do a saragosa next
Wouldn’t that be something!!
Size Gomexus knob?
The 38mm and it can be bought right here: Gomexus Power Knob (38MM) : rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FGomexus-Reel-Knob-For-Shimano-Stradic-Daiwa-Spinning-and-Baitcasting-Reel-27mm%2F283934677525%3F_trkparms%3Daid%253D111001%2526algo%253DREC.SEED%2526ao%253D1%2526asc%253D20160908105057%2526meid%253D4b2992f9c8b44e77a364639143a4ac4e%2526pid%253D100675%2526rk%253D5%2526rkt%253D15%2526mehot%253Dnone%2526sd%253D273058835431%2526itm%253D283934677525%2526pmt%253D1%2526noa%253D1%2526pg%253D2380057%2526brand%253DShimano%26_trksid%3Dp2380057.c100675.m4236%26_trkparms%3Dpageci%253A67b1c1d0-0721-11eb-8e60-be6cb3681b15%257Cparentrq%253Af96de11f1740aaecad70de02fffcfe9c%257Ciid%253A1&campid=5338690692&toolid=10001&customid=Gomexus
After upgrade.how many bearing have？
I believe it has 10 Ball bearings now!
@@WestCoastFloridaFishing what about the drag？ Can upgrade also？
I want to buy Shimano spheros4000 is it good
It is great for the price point!
Nice upgrade. Is the upgrade any different with the Spheros SW 4000 XG?
Nope! It is the exact same! And thank you!
Do you know if upgrades performed on the Spheros 4000XG will work on Spheros SW 6000?
I am not sure but I will have an upgrading video on the 8000 sized spheros SW soon!
-Stella Worm gear Bearing Counterpart (RD 11018) = ..x...x..?
-Non-Handle Side Bearing (RD13274 or 7x11x3 = 7x11x3
Stella handle bearing counterpart (RD13269 = ..x...x..?
i need size. thank you bro nice video
Are the bearings sealed?
The bearings are shielded but not “sealed” of course you can seal them by adding grease to both sides of the bearings!
Greetings a hobby
Greetings!
Shimano drives me nuts...Not a lick of grease on that reel straight up from the factory.
Isn't is sad? "Smoothest" that way........
U missing 1 sim 😂😂😂
Where at??
Please reply to me
great video, I enjoyed it. I joined so I won't miss any. If you get a chance, check me out and subscribe if you like the content.
Thanks for the Sub!
can you use the bearing that come with the gomexus?
I bought it. No you cannot use the bearing that come with the gomexus.
Thanks for letting us know!
Which power knob model number did you use?
Bearing size?
I will work on adding bearing sizes in the future video!