I run a 32 inch full. Skip on a 462. There’s no problem running along bar even on a smaller saw It’s just a whole New World of cutting with a long bar as long as it’s getting enough oil. It doesn’t take any more horsepower to turn a long chain. as long as you’re not burying the whole thing in wood. And you mostly have it for a long reach.
Put a 32" on my 038 magnum, and it does great, but that is a 72.5 cc saw to my knowledge. It's an older saw i got from an older neighbor and wasn't running. Would love to send it to the Tinman and have him go to town on it. Love your stuff Buckin . Stay happy 🇺🇸🙂
562 ported has been lots of the fellas favorite in northern New England, USA since 2016 for sure. Everyone still loves and trusts the 372 of course, but that 562 is so light and snappy…love you Buckin
Big fan of the 562 myself. Friend of mine had an original 562 that was muffler modded and timing advanced and it was very impressive before porting. Ported? Whew!
Great stuff. Just picked up a new 562xp MK2. went 28in, will be switching to a lightweight bar soon. Already itching to add a 372 or 392 to the stable with a little bigger bar. Thank you for the honest insight, and nothing but love for all. have a great day.
❤ Great video as always . I just love the sound of a chain saw running . Glad your trying to see what size bar you can run Then you can give information to your followers
Just wanted to say thank you, Buckin’. Received my grey leather patch logo hat today, down in South Australia. Looks awesome mate. I appreciate the quick service and postage (2 weeks). Quality is awesome too. Thanks to everyone involved. Adam.
Hi Buckin’ - I have purchased around twenty (20) STIHL chainsaws the last fifteen (15) years. I still own all of them, except for a STIHL 362 and STIHL 362c. Neither version of the 362 excited me, so I sold the both of them with no regrets. I own a stock STIHL 361 and it eats wood. Personally, I would rather see you do a comparison between a STIHL 361 & the Husqvarna 562.
I have a 362 also and I agree with ya. It's a great saw but looking at it from a weight to power ratio if I'm going to be cutting all day I'd rather take my 462 and have the extra hp.
Like the addition of double dog setup. Gotta have the full wrap handle. I would love to see the comparison of the 562 go against the ( never talked about ) except Tinman, 365. Similar power, similar RPM. Stay healthy and stay strong.
Hello Buckin B. beautifully captured again! good job! I mounted a 28inch bar on my mac 10-10 stock saw with updated exhaust. same result actually. Great in thinner wood, but on the stump 24inch + it is more difficult. Certainly full house chain... Nice video again!! Greetings kristof Belgium ❤
I've been curious about the longest bar that could realistically be run on a ms260. I don't live near much big wood so it would be more so to prevent having to bend as much. I know its only 50cc but I like it.
Wow man, Buckin, i actually am in awe of how good it handles a 32! I agree with ya about the 28, and upgrading the mounts for sure, and the filing needs to be on point 👍👍 what an honor it would be to own a saw you and morgan were a part of😮 thats gonna be one lucky recipient for sure!! Hope ta be in the store soon!! Great video, and look forward to seeing it eat up that 362😊😊❤❤
I am currently refreshing a 562 mk1 for someone it’s ported here said it runs great and cuts great I didn’t run it before teardown but definitely will after it’s done.
3 weeks ago I tried a 32” on my 562, I spend the time to tune the chain but just couldn’t get over the poor balance even with a light bar which was enough for me to abandoned ship. It pulled it just fine which makes me want to try a premier light bar for better balance. But then again that’s not what I built my 562 for so I guess I’m saying I’m still torn haha😂
BUCKIN’ Can you please read my comment it’s about you helping me out from something that you said yesterday :) These past 3 weeks my families tree service company has been booming again because the Texas cold has left , Fast forward , Yesterday you said that your clients JUST NEED SOMEONE THAT CAN DO THE JOB and man I’ve been so tired but i kept telling myself today all day that “ What would Buckin ‘ think of me right now ? Will he laugh at me because I’m at work tired , Or will he be proud of me Because I’m the Right Guy to do this job “ Buckin ‘ you helped me so much today !!!! It was BIG dead oak tree that was in the ground already , but we had to get a 20 inch Saw to cut through it , Thank you Buckin ‘ , we got out the job early because of what you said THE CLIENT JUST WANTS SOMEONE THAT CAN GET THE JOB DONE “ when you get home , Do you think you could’ve done more today “ THANK YOU BUCKINN ❤❤❤❤
I got my brother a 562XP for firewood, his 029 was wore slap out. It's only running a 20" bar but I see it'll take a 28" wondering how it handles it, thanks for the video brother
I run a 28 on a 046 all the time, with an 8 pin drive sprocket too. I’ve run the same bar on a stock 036. It works, just don’t hang on the dogs so hard.
I always watch your vids with my 14 month daughter she really loves it. "watch buckin dear?" bram bramm brammm! yes I do daddy lol. I bet you can't wait for your kids to have kids billy. Have a great weekend
52cc stock oleo-mac pulls 24" full house square tooth no problem, regret didn't go straight to 28" which would be better for my height... Still better than 20" which was originally on it.
I'm just a shade tree, but near the end, the saw seemed to be laboring a bit. Was it because of the length of the bar, or the filing on the chain, or maybe it needed to be a wee sharper!! Or maybe, I am still that shade tree and not sure what I am seeing. Keep up the good work.
Loonnnnngggg bar it is lol 😂 I run a 24” on my 266 and a 28” on the OE 372xp but might step up to a 32” on the 372 🤙🏼 Peace love and kindness Brother 💪🏼 from your Cedar boy.
@@joshlower1 Nope. Just wanted to let people know in case they’re also looking for a 60cc class saw and need a longer bar to make sure their back stays good and straight. But thanks for the offer Josh. ✌🏻
Buckin, what’s the philosophy behind the ‘Sister C’? I’m assuming due to the small radius, it allows you to get a flatter angle underneath the top-plate but transition quicker to a bigger angle and therefore quickly gain a stronger top-plate edge, is this about right?! To do this with a 7/32 would have the angle carry back into the top-plate too far and weaken the top-plate. To have the 7/32 this low would also be removing much side plate/tooth, etc.
I don't think a 60cc saw oils a 32" bar adequately enough. Bar and chain will wear out faster. I would agree, 28" max bar for 562. Looking forward to 362 - 562 runoff.
I just got 5 new 372xp OE, this new husky's are not available in my country, 395 is about to close their production in Brasil, so if you can get some just do jt.
I bought a 362 and a 562 mark I at the same time. The 562 will win. The difference between those two saws is that the 362 is still running and likely will for another decade and the mark I has already been in the shop for a catastrophic failure and it’s only 6 months old. First saw I’ve ever owned that didn’t run somewhere in the neighborhood of two thousand hrs before it needed to be opened up. Granted I have a half dozen newer saws that likely will never get to a couple thousand hrs because I’m no longer cutting 6hrs a day every day but that husqvarna and the way they handled what should have been a warranty job turned me off of them. Shame two because overall they likely are currently making the best saws but screw me once and I hold a grudge. I think I’ve bought close to twenty different models of saws new and probably 50 total and that 562 is the only one that turned me off. Hopefully others mileage is different. Why the shop didn’t just recommend waiting a couple more months for the mark II to come out bothers me as well. Live and learn. Maybe if it ever comes back from the shop it’ll hold together long enough to make me forget about it. Who knows 🤷🏽♂️👍🏼
I'd love to port a cylinder for you and send you a .007 base gasket transfer mod and a thinner gasket would mane that saw unstoppable with a 32 pm. Me if you're not too busy
Hey buckin how do I track my package that I ordered from your website I thought I used my email but I didn't get any tracking info. Just wondering can't wait to get my buckin hat ! Also I got a new saw today ! Stihl ms461 max flow kit and wcs bark box! Things a screamer!!!
Are we going to see more you working on your old trucks? Useing bigger power saws and when do we get to see more from the saw that walker is working for you the 372
This is my youtube channel where I upload things I am doing . And if you click the bell TH-cam should keep you up to date on things I’m doin’ 😊 . Thx for watchin’
@@BuckinBillyRaySmith My 362XP is circa June 2001. The Operator's manual covers the 362XP, 365, and the 371XP. Maybe this is a good opportunity to pick one up, work your magic, and put it thru your tests!!
He does. It's all about which side of the tree you're on. I have come to appreciate that it's absolutely mandatory, because safety, because ergonomics. It's about the lay of the land, where yer standin', and what's above your head. Absolutely 100% necessary for falling (maybe not bucking).
I’m in the process of lightly porting a 52mm top end to put on my JRed 625ii… I’ve been debating a 28” or 32” for it when it’s done? Tell me your arseholes..oops I mean tell me your opinions😂😂
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
I run a 32 inch full. Skip on a 462. There’s no problem running along bar even on a smaller saw
It’s just a whole New World of cutting with a long bar as long as it’s getting enough oil. It doesn’t take any more horsepower to turn a long chain. as long as you’re not burying the whole thing in wood. And you mostly have it for a long reach.
Put a 32" on my 038 magnum, and it does great, but that is a 72.5 cc saw to my knowledge. It's an older saw i got from an older neighbor and wasn't running. Would love to send it to the Tinman and have him go to town on it. Love your stuff Buckin . Stay happy 🇺🇸🙂
Definetly want to see the piped 562 and the 362 tango Buckin 😊
The battle of the 62s sounds great I'll watch that for sure. Have a blessed day Billy always love watching your vids.
562 ported has been lots of the fellas favorite in northern New England, USA since 2016 for sure. Everyone still loves and trusts the 372 of course, but that 562 is so light and snappy…love you Buckin
Big fan of the 562 myself. Friend of mine had an original 562 that was muffler modded and timing advanced and it was very impressive before porting. Ported? Whew!
Great stuff. Just picked up a new 562xp MK2. went 28in, will be switching to a lightweight bar soon. Already itching to add a 372 or 392 to the stable with a little bigger bar. Thank you for the honest insight, and nothing but love for all. have a great day.
Thx .. good choice
562 VRS 362 😁👍👍
Please😍
562 will rip the ms362 to pieces
Boy I don't know, I have a 362 and it runs pretty good. We should definitely find out
I run a 362 at work on the golf course.... It can't hold a candle to the 562.....
Yeah!!!! Lets race 362 vs 562!
❤ Great video as always . I just love the sound of a chain saw running . Glad your trying to see what size bar you can run Then you can give information to your followers
Just wanted to say thank you, Buckin’. Received my grey leather patch logo hat today, down in South Australia. Looks awesome mate. I appreciate the quick service and postage (2 weeks). Quality is awesome too. Thanks to everyone involved. Adam.
Really interesting video! That 562 with the pipe really seems like quite the kit. Thanks Buckin and have a nice day everyone!
Hi Buckin’ - I have purchased around twenty (20) STIHL chainsaws the last fifteen (15) years. I still own all of them, except for a STIHL 362 and STIHL 362c. Neither version of the 362 excited me, so I sold the both of them with no regrets. I own a stock STIHL 361 and it eats wood. Personally, I would rather see you do a comparison between a STIHL 361 & the Husqvarna 562.
I have a 362 also and I agree with ya. It's a great saw but looking at it from a weight to power ratio if I'm going to be cutting all day I'd rather take my 462 and have the extra hp.
Like the addition of double dog setup. Gotta have the full wrap handle. I would love to see the comparison of the 562 go against the ( never talked about ) except Tinman, 365. Similar power, similar RPM. Stay healthy and stay strong.
Just finished today with my new 572 . 28 and 36 bars. Thanks Buckin!
Love it! Good day to you Buckin and Buckin army!
Hello Buckin B.
beautifully captured again! good job!
I mounted a 28inch bar on my mac 10-10 stock saw with updated exhaust. same result actually. Great in thinner wood, but on the stump 24inch + it is more difficult.
Certainly full house chain...
Nice video again!!
Greetings kristof Belgium ❤
Buckin billy ray that sounds very good 562xp mark ii ❤
"Gentlemen, start your engines!"
Love you all... ❤❤❤
Lieutenant Bradley
I've been curious about the longest bar that could realistically be run on a ms260. I don't live near much big wood so it would be more so to prevent having to bend as much. I know its only 50cc but I like it.
Go Buckin. Let's do that. That sounds like a great idea. Bless you Buckin.
Let the saw battle begin, I love those side by side videos with the stereo sounds 😂
Yeah, the 562 vs 362 needs to happen! Also, that 32” pulled better than I expected. I am still torn between the 562 or a 572 for my next saw.
Wow man, Buckin, i actually am in awe of how good it handles a 32! I agree with ya about the 28, and upgrading the mounts for sure, and the filing needs to be on point 👍👍 what an honor it would be to own a saw you and morgan were a part of😮 thats gonna be one lucky recipient for sure!! Hope ta be in the store soon!! Great video, and look forward to seeing it eat up that 362😊😊❤❤
I am currently refreshing a 562 mk1 for someone it’s ported here said it runs great and cuts great I didn’t run it before teardown but definitely will after it’s done.
Lotsa man glitter flying from that saw
Just finnished porting my 562 getting it back together building a pipe full wrap with a 28❤❤ you inspired me Again
3 weeks ago I tried a 32” on my 562, I spend the time to tune the chain but just couldn’t get over the poor balance even with a light bar which was enough for me to abandoned ship. It pulled it just fine which makes me want to try a premier light bar for better balance. But then again that’s not what I built my 562 for so I guess I’m saying I’m still torn haha😂
I love what do. I learn something new every time.
I run a 24" bar on my 50cc Echo 490, although its ported and muffler opened up. Shop said it wouldn't run it, but it pulls it just fine
BUCKIN’ Can you please read my comment it’s about you helping me out from something that you said yesterday :)
These past 3 weeks my families tree service company has been booming again because the Texas cold has left , Fast forward , Yesterday you said that your clients JUST NEED SOMEONE THAT CAN DO THE JOB and man I’ve been so tired but i kept telling myself today all day that “ What would Buckin ‘ think of me right now ? Will he laugh at me because I’m at work tired , Or will he be proud of me Because I’m the Right Guy to do this job “
Buckin ‘ you helped me so much today !!!!
It was BIG dead oak tree that was in the ground already , but we had to get a 20 inch Saw to cut through it , Thank you Buckin ‘ , we got out the job early because of what you said
THE CLIENT JUST WANTS SOMEONE THAT CAN GET THE JOB DONE
“ when you get home , Do you think you could’ve done more today “
THANK YOU BUCKINN ❤❤❤❤
I got my brother a 562XP for firewood, his 029 was wore slap out. It's only running a 20" bar but I see it'll take a 28" wondering how it handles it, thanks for the video brother
Hard to replicate that 2-step move at 15:13 lol,Sha Clangin!!
I've run a 32 on my first run 562x many times, no issues, it's my go to Saw
Good video. A bit different. Always keep everything in life progressing and evolving in the good for the good.
Nice pretty cool info I don't think I have seen many ported 562xps would probably really be a runner
I've ran a light weight husky bar on a 1994 husky 61, for years!!! No problems at all!!
Them are heavy
Another great video as always, hope your having a great weekend and all fellow subscribers.
Hope all The Buckin Fam doing well!
Deadly timing.
Possible vs. Sustainable in the long term…
Lovin’ the content
I run a 28 on a 046 all the time, with an 8 pin drive sprocket too. I’ve run the same bar on a stock 036. It works, just don’t hang on the dogs so hard.
It's designed to run it, your point brother?
Hi buckin from Scotland 🏴
I always watch your vids with my 14 month daughter she really loves it. "watch buckin dear?" bram bramm brammm! yes I do daddy lol. I bet you can't wait for your kids to have kids billy. Have a great weekend
I run a 36" light bar on my 572 no problem with lack of power, I'd say a 562 would handle a 32 in light bar
Tanks for the everyday video!
Nice running saw , hey buckin where is your ear protection 😮😊 love the videos you have taught me alot keep up the good work ❤
Definitely need to race the 2 saws.
52cc stock oleo-mac pulls 24" full house square tooth no problem, regret didn't go straight to 28" which would be better for my height... Still better than 20" which was originally on it.
I'm just a shade tree, but near the end, the saw seemed to be laboring a bit.
Was it because of the length of the bar, or the filing on the chain, or maybe it needed to be a wee sharper!!
Or maybe, I am still that shade tree and not sure what I am seeing.
Keep up the good work.
Buckin that’s a saw a that long bar are a real pair it look a lot easier on the back I run ms 261 logging . Keep up the good videos
Loonnnnngggg bar it is lol 😂
I run a 24” on my 266 and a 28” on the OE 372xp but might step up to a 32” on the 372 🤙🏼
Peace love and kindness Brother 💪🏼 from your Cedar boy.
Billy,you have a Doppelgaenger in Germany Christian Demuth! hav a great day and thank you for this Video ❤
Shame a saw so so capable is limited by its mounts. I suppose that's the trade off for the low vibration.
I have a 562 with a 28" love it!! Can you tell me where to go to find that ramhorn muffler? I have searched and can't find one online. Help please.
Me too, i would like one for my 562 as well
Not sure
❤Billy Ray of Light!
Never met a lumberjack called Nigel!
I swapped the muffler on my MS400 and put a 32” bar on it and it ran it flawlessly. The saw didn’t feel stress or overworked whatsoever.
@@joshlower1 I'll take one.
@@joshlower1 Nope. Just wanted to let people know in case they’re also looking for a 60cc class saw and need a longer bar to make sure their back stays good and straight. But thanks for the offer Josh. ✌🏻
That’s good news cause the 500 needed help carrying a 32” they even made a kit for it 😊
@@BuckinBillyRaySmith That’s wild news. I’m glad I got the 400 and the 462. I love that little saw.
Buckin, what’s the philosophy behind the ‘Sister C’? I’m assuming due to the small radius, it allows you to get a flatter angle underneath the top-plate but transition quicker to a bigger angle and therefore quickly gain a stronger top-plate edge, is this about right?! To do this with a 7/32 would have the angle carry back into the top-plate too far and weaken the top-plate. To have the 7/32 this low would also be removing much side plate/tooth, etc.
Another great video.💪👌
Hello from little old New Zealand
Can any of my buckin family recommend a place to get accessories for my saw? Like after market handles?
That video was awesome, would a pipe benefit a 460 rancher? Just curious, and if so how would I purchase one? Thanks Buckin..
It 'll cheer up any saw🙂
I don't think a 60cc saw oils a 32" bar adequately enough. Bar and chain will wear out faster. I would agree, 28" max bar for 562.
Looking forward to 362 - 562 runoff.
I just got 5 new 372xp OE, this new husky's are not available in my country, 395 is about to close their production in Brasil, so if you can get some just do jt.
HI BILLY nice one again
Yep to long man. 372 would eat it up. Good video of it. Up to the individual cutters preference which is all good.
BE KIND
I bought a 362 and a 562 mark I at the same time. The 562 will win. The difference between those two saws is that the 362 is still running and likely will for another decade and the mark I has already been in the shop for a catastrophic failure and it’s only 6 months old. First saw I’ve ever owned that didn’t run somewhere in the neighborhood of two thousand hrs before it needed to be opened up. Granted I have a half dozen newer saws that likely will never get to a couple thousand hrs because I’m no longer cutting 6hrs a day every day but that husqvarna and the way they handled what should have been a warranty job turned me off of them. Shame two because overall they likely are currently making the best saws but screw me once and I hold a grudge. I think I’ve bought close to twenty different models of saws new and probably 50 total and that 562 is the only one that turned me off. Hopefully others mileage is different. Why the shop didn’t just recommend waiting a couple more months for the mark II to come out bothers me as well. Live and learn. Maybe if it ever comes back from the shop it’ll hold together long enough to make me forget about it. Who knows 🤷🏽♂️👍🏼
The 562 is about half the price of a 592 so no doubt the suspension mounting would probably be lighter😀
What length bar would you recommend for my Stihl MS461? It’s a 76cc
562 vrs 460 rancher. Both are 60cc saws
I want to compare my dad's 460 to my piped craftsman 3.7/poulan 3700 mine is 61cc but I've heard people say it's not actually
I'd love to port a cylinder for you and send you a .007 base gasket transfer mod and a thinner gasket would mane that saw unstoppable with a 32 pm. Me if you're not too busy
How do y’all think a 32” would do on my Stihl 291??
Great stuff
Hey buckin how do I track my package that I ordered from your website I thought I used my email but I didn't get any tracking info. Just wondering can't wait to get my buckin hat ! Also I got a new saw today ! Stihl ms461 max flow kit and wcs bark box! Things a screamer!!!
Let’s get to porting lol
What happened to your left hand?
I grabbed a couple T shirts.
Good. Shoulder doing ok?
Are we going to see more you working on your old trucks? Useing bigger power saws and when do we get to see more from the saw that walker is working for you the 372
This is my youtube channel where I upload things I am doing . And if you click the bell TH-cam should keep you up to date on things I’m doin’ 😊 . Thx for watchin’
Where do you get the upgraded bar mounts and how do you install them?
Just got me a new sthil been bucking all day. What do think the longest bar i could get on a 64cc
We have ms 361 14000rpm best kind Shorter bar
What kinda pipe should I put on my 372 it’s not ported
Seems like it would get in the way
Lots of opinions here, what is the cheap way to get 32" for someone with a bad back and only using occasionally ?
I guess it is up to the user to answer that question, isn't it?
i just got a 545 xp mark 2. whats the chances i can run a 24 inch bar on it and not destroy it. stock. i wish i got the 550xp or the 555xp
How old is bucn Billy?
What kind of muffler do you use on this saw? I have a 562 and would like a mod!
Race them. 👍👍.
Any oiler adjustments done ? We didn’t see.
💪👊
I've been running my Husky 362XP for a long time now. 20" bar. Never any issues. Curious what your thoughts are on this one?? Thanks for sharing!!
I didn’t know they made a 362
@@BuckinBillyRaySmith My 362XP is circa June 2001. The Operator's manual covers the 362XP, 365, and the 371XP. Maybe this is a good opportunity to pick one up, work your magic, and put it thru your tests!!
Race it.....!!!!👍
👍💪🤝👑
Ahwoooo get one 👍
Why is a longer bar bad for the mounting system?
A cord of wood is really hard on a half to truck
Ripping
I’m not trying to be the safety police but, where’s your hearing protection? Awesome video Buckin’!
Stihl is heavy duty rugged.
Husqvarna is fast ,flimsy.
I don't get the full rap bar I never see you using it,
He does. It's all about which side of the tree you're on. I have come to appreciate that it's absolutely mandatory, because safety, because ergonomics. It's about the lay of the land, where yer standin', and what's above your head. Absolutely 100% necessary for falling (maybe not bucking).
I’m in the process of lightly porting a 52mm top end to put on my JRed 625ii… I’ve been debating a 28” or 32” for it when it’s done? Tell me your arseholes..oops I mean tell me your opinions😂😂