Wood carving a cane 3 ,dremel,whittling

Wood carving a cane 3 ,dremel,whittling

[@AmyJo143]

🧡🧡🧡🧡I just love your stick Rob!!!! Awesome. ✌️

[@justcarverob9389]

Thanks Amy Jo

[@arturometauten5167]

I'm prefer an quiet Artist and the carving tools dialogue only Any way, I like your work .

[@justcarverob9389]

Thanks Arturo il have to give it a try stay safe Just carve

[@IdahoRanchGirl]

That diamond burr u used to get inside the leaves is one of my favorite ones of all. I like them for doing eyes

[@justcarverob9389]

Thanks yes they do stay safe just carve

[@artisticdoodoo6519]

AWESOME VID. THANKS.

[@justcarverob9389]

Thanks Bruce
Just carve

[@mylastnerve138]

This is beautiful rob. Let's not be ripping off nuts rob.

[@justcarverob9389]

Thanka Anna
Just carve

[@Wallisersonne]

Great. Thanks for the idea

[@justcarverob9389]

Most welcome 😊

[@jayc3110]

Very nice intricate and highly detailed project... Some Questions for you! : [1] -- What speed did you set on the Dremel using the KUTZALL Extreme bit? -
[2] -- Do you change speeds with the Dremel with the KUTZALL Extreme bit, for different tasks?...
[3] What is the Dremel speed set at when you use 'Diamond Burrs'?
[4] One more (Important} Question: You mentioned the 'Vaccum going' for your dust collection. Please do share how you set up your Dust collection with the Vaccum? (i hope it's simple!)
Perhaps you will find time to do a short Video demonstrating your dust collection system?
Thanks for all your Videos. They are appreciated.

[@justcarverob9389]

Wow good question all for the kutzall extreme burr the dremel is wide open always . The speed for the diamond burrs I run around half speed for the big ones with is about 18000 rpms the small diamonds I run about 12 - 15000 rpm keeps the from getting plugged up. I ALSO use a fine pumice stone to clean them diamond only . The dust collection system is a shop vac a 5 gal lows bucket with lid and I bought a cyclone from Amazon not hard to put together once you have everything. Hope's this helps you say awsome and just carve

[@jayc3110]

@@justcarverob9389 Thank you so much for the information on Dremel speeds.... Also you say When and if you find time do make a video of your setup? ... Thanks again.

[@justcarverob9389]

No problem jay I'll shoot you a video on my set up thanks bud

[@Pressingontoperfection]

Please send me a video of shop vac video thanks

[@rumpple4skin976]

this is cool great job

[@justcarverob9389]

Thanks rumpple stay safe Just carve

[@Wingman115]

Question do you have a website link for your graphics? Good stuff learning a lot watching you and Jordie.

[@justcarverob9389]

No I do not wing man a lot of them I draw . And some come from the books I have

[@lloydbannister8062]

Hi again rob great video as all ways what do you use or how do you get your patterns on you walking sticks or gun stocks

[@justcarverob9389]

Thanks Lloyd I will draw them on a piece of copy paper and use a glue stick and glue them to the project
Or find something I like on google then print it out and glue it on the project
Hope that helps stay safe just carve

[@lloydbannister8062]

Will do buddy

[@Pressingontoperfection]

What kind of dremel is that ?

[@justcarverob9389]

Thanks Ryan it is the dremel 4000 with a flex shaft stay safe just carve

[@marinevet7273]

Do you glue the pattern on, Where can we find patterns like this to print out? Thank ya!

[@justcarverob9389]

Hi vet I use the cheap school glue stick to put the pattern on the stick I have several books on gun stock patterns
And my own that I use it’s way easier to draw the pattern on paper then glue it on the stick stay safe

[@a.k.6511]

The shape of the diamond burr is special. I can't find it in any listing. Can you give me a reference to the source of supply? What is important with the form? Can I also use a similar one?

[@justcarverob9389]

Thanks Henning it is called a flame or football diamond
Just carve

[@ericscott9784]

Could you do a custom cane with a logo i provide you?

[@justcarverob9389]

Thanks Eric I believe I can I would have to see it my e mail is
[e-mail]
Thank stay safe Just carve

[@IdahoRanchGirl]

U guys need to get rid of that governor of urs. She's on a power trip. I know it's a few years later but she's still a horrible governor. You guys had the strictest lockdowns. We didn't even have to wear a mask here if we didn't want to. Our governor doesn't treat us like we're little kids.

[@justcarverob9389]

Thanks I agree stay safe just carve

[@alanterry6683]

Man, lots of detail. Reminds me of a 1969 movie “The Illustrated Man”. Looking good!

[@justcarverob9389]

Lol thanks Alan

[@janiceharris6874]

Where did you get your dust collecter

[@justcarverob9389]

Hi Janice I use a shop vacuum I bought it at harbor freight its the biggest one they had with 2 inch hose they also have a small dust collection system now thanks stay safe Just carve

[@MaxFluff]

what Dremel do you use? im thinking of doing the same as a quarantine project with my sister

[@justcarverob9389]

Hi max I use a Dremel 4000 with the cable stay safe
Just carve

[@iyeetsecurity922]

*Me too thanks*

[@IdahoRanchGirl]

Keep away from those nuts!

[@justcarverob9389]

Lol thanks hahaha

[@CarvingFusion]

Its really comming along rob! Love it

[@justcarverob9389]

Thanks jordy

[@dennismccolley1380]

Yeah what a piece-of-cake she is

[@justcarverob9389]

Thanks Dennis yep easy peasy hahahah stay safe just carve

[@themellowmile]

Where do you find this paper that you made the design? What is it called?

[@themellowmile]

Wow I just saw your other video where you said it's paper and glue 😅😅

[@IdahoRanchGirl]

I was only able to get the original flame. But i did get the kutzall taper and the triangle shaped one. I like that taper burr

[@justcarverob9389]

Thanks the original work good just have to take your time with them stay safe just carve

[@michaelwray4359]

Amazing rob you and jordey are the best ever

[@justcarverob9389]

Thanks Michael stay safe Just carve

[@KnifemakMike]

Subscribed! I’d like to do this to my knife handles. 👍

[@justcarverob9389]

Thanks Hernandez

[@johntorok6589]

Where can I find a pattern for the leaves and acorns.

[@justcarverob9389]

The patterns came from a gun checker book thanks John
Just carve

[@terrytyler3749]

Where did you get the design

[@justcarverob9389]

Thanks Terry some of the designs are mine and some came from a book of gun
Stock checkering

[@nanaheather9994]

Beautiful Rob! 😊

[@justcarverob9389]

Thanks heather stay safe just carve

[@markduggan3451]

The stick is really looking good.

[@justcarverob9389]

Thanks mark

[@saggioculo5386]

Another awesome video. Great info.

[@justcarverob9389]

Thanks saggio glad you enjoyed it

[@Wingman115]

Happy Easter.

[@justcarverob9389]

You too wingman

[@anthonyrooney2996]

The cane is looking great rob

[@justcarverob9389]

Thanks Anthony

[@L.SPARROW58]

Be nice if it WAS "Just Carve" !
Just sayin...... 🤔

[@justcarverob9389]

Thanks loz stay safe Just carve

[@hughtempleton8640]

Look's amazing 😀

[@justcarverob9389]

Thanks hugh

[@peteblairakathemadscientist]

Hey Rob when are you going to go live? LOL

[@justcarverob9389]

I have to have a lot more subscribers before you tube will let me do that lol thanks pete

[@majsaif3246]

how can i get one plz

[@justcarverob9389]

I order this one thru Amazon but please wait for a bit until I do a full review
But it up to you so far it good
Thanks for watching

[@georgeohwell8481]

Greetings from Coleraine,Northern Ireland....

[@justcarverob9389]

Hi George welcome to the channel
Just carve

[@georgeohwell8481]

@@justcarverob9389 Loving it fella, keep em coming.....😉

[@budirwin9825]

Steady hands... By Rob

[@justcarverob9389]

I try lol Bud stay safe

[@christinakindler9112]

That bit is awesome

[@justcarverob9389]

Thanks Christina stay safe Just carve

[@christinakindler9112]

@@justcarverob9389 Absolutely! Any kind of wood working is a passion for me. I have that bit coming in the mail. Thanks for the tip 🙂

[@craigtaylor8801]

Good video, I'm in Michigan, make sure to batten down the hatches I know its gonna be windy. Sometime I'd like to talk to u about the scm .

[@justcarverob9389]

Sure Craig be glad to

[@johnellison9022]

I'm in Michigan too, just found this video, Monroe Mi for me. Carve on!