Ntools NVE 1.3 v YT160 1.3 For Base Coat, Based On Devilbiss DV1 and Iwata W400
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- My ramblings on the NTools NVE and the Chinese YT160, the NVE has come down in price so this is a good comparison, both in 1.3 .Thanks for watching everyone. It really is appreciated 👍
Please subscribe to my TH-cam channel, link below
/ @peteshobbies5383
The difference heating your clear coat can make,
• Heating 2k Clear Coat ...
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Stand alone review of NVE,
• Chinese NVE 1.3 Ntools...
NVE v Devilbiss DV1
• NTools NVE 1.3 v Devil...
Physical differences between the NVE and DV1 Devilbiss.
• Chinese NVE Devilbiss ...
Difference between the Base and Clear version's of the Devilbiss DV1,
• Devilbiss DV1 Clear & ...
Difference between the C1 and C2 cap on Devilbiss DV1,
• Devilbiss DV1 Clear Ai...
Comparing different clear coats;
• Clear Coats, Mipa CX4,... est Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only. The views expressed are my own, and should you choose to follow them, you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching
Thank you for this. Explain. I am from Morocco. This is my profession. I did not know things, but I benefited. I did not read about my profession, but I learned in a shop. I was 12 years old. I am now 34 years old. I have had a number of teachers, and I liked Ola Ahdah dv1. It is expensive, but The touch is there, I would love to have it, but there is no hope,😅😅
Hi mate, learning the way you have is the best way to learn. You become a much better painter 👌
THANKS FOR THE NEW VIDEO,GOOD INFORMATION ON AFTER LEAVING BASECOAT FOR A WHOLE DAY,BY SHOOTING A CLEAR BASECOAT TO REVIVE THE PAINT
Hi Lesli, There's a few ways of going about it but I thought I would mention it as quite a few people in conversation mention things like, "I'll do the base coat this weekend and clear the next weekend or one tonight and the other the following night, sure it would work but you compromise longevity big time, cheers buddy 😀
@peteshobbies5383 ,YEAH mate,I don't like to compromise. When it comes down to the overall appearance of the job, that was the Reason why I have been, experimenting,with the AEROPRO, I think IWATA Split NOZZLES are just Superb,like you said in your video nothing wrong for as longevity of the AEROPRO, it just needs Tweeking with the Split Nozzle and a little Tweaking with the cap,I just like to Profect Things,PORPHIS 717 VS,I LOVE ❤️, I STILL LOVE TO MESS AROUND MY TOOLS AND SEE IF I CAN MAKE IT BETTER
@lesliwells5433 The Porphis is good isn't it, a gem of a gun and not that expensive compared to some 😀
@@peteshobbies5383 INDEED A GEM,MATE
@@peteshobbies5383 PORPHIS 717 VS,A VERY AWESOME GUN FOR THE PRICE
lets see a comparison of the clear coat abilities of the r500 vs the NVE 1.3
Thanks!
I'll put it on my list 👍
Hi Pete hope you are keeping well mate as you seem to be a bit quiet lately🤔both guns here look like they are pretty good value for money but as you say the NVE is the better gun as it's a bit faster than the YT160 and it looks like it lays the base a bit smoother but I think either gun would be great for a beginner👌from what I can tell on the video the spray pattern looks better on the NVE as well👍
I remember when I borrowed your NVE and the copy ProLite I thought the NVE was the better gun and that the ProLite wasn't really worth the asking price🤔
My next tank should be up later today and I've used a different mini gun for the base and clear😎cheers mate👍
Hi John, I think you would probably agree that the NVE sprayed better than your Rongpeng R500?
There were a few things that made me do the video, the NVE is now much cheaper and a few people have messaged me saying they have had seal problems with the NVE after a while so just keeping people up to date really.
All good here mate, been really busy, so I'm not as active as I should be, but obviously, I need to keep the bank topped up 😅
Will keep a look out for your post later. Cheers, mate 👍
Oh yeah without doubt Pete the NVE is a far better gun at laying the clear compared to my Rongpeng R500 it does have it's uses though as I liked the way the R500 laid my WoW primer and it's not to bad for my solvent basecoat I haven't tried it for water based basecoat though.
So long as you are ok mate but as you say you need to earn some dosh so you can buy all those lovely spray guns😄something I don't have to worry about but I still can't afford all the guns I want to get🙄👍
Yeah, that's certainly what I find as well.
Exactly mate, my gun bill is getting enormous 😂, cheers John ✌️
My advertisement is that I use a translator.❤
We are in Morocco, there is a person who uses 1.7 hvlp in the last paint, I was surprised, no, let me know, yes, they use a 30 dollar pistol,🤔
Hi Mate, I have a Meiji Finer force that I use for clear coat, It's a 2.0 and works well 😀
Off topic question from a past video - Is Porphis violating Iwata's split tip patent.
Hi Joel, I think the answer is yes and no. As far as I know, or have you been able to ascertain, the patent can't be enforced in China? If the government doesn't want to enforce it, how can it be? I guess the same applies to Taiwan as they make a few split tip gun's
Hola!saludos desde España..ntool nve es para pintura base agua o base disolvente?un saludo
Hola amigo, te saludo en la soleada España. El NVE funcionará tanto con agua como con disolvente.
Muchísimas gracias!!!
@jsuarz6008 De nada amigo
How are you? I was looking for a clear sheen. Are you using 1.2..1.3 .lvlp.
Hi mate, normally 1.3 for clear coat
I get they're inexpensive tools, but still a disappointment that relatively priced parts aren't available for the NVE. I suppose one would find it's somewhat justifiable to move on after it's done, but it's also a waste in materials to throw it in the bin for something simple. Hopefully, they will offer spare parts one day..
Hi Boss, Yes, I completely agree. These parts are relatively cheap and could easily be made available but just aren't.
There's a guy that watches this channel and he tells me I should get an Aeropro A608 as they are very good, I haven't because it has the same seal as the Gti Pro Lite and this NVE and there is no spares available, it not expensive but its not cheap so I just don't want to take a chance.
Thanks as always mate 👍
@peteshobbies5383 What's ironic is that some of these copy guns sell not too far under the lower tiers of ANI & Devilbiss, which have repair parts. Go figure...
Keep up the good videos!
@bosshawg7427 Especially ANI, they even offer a service kit for there GF3, a 35 dollar gun, and, the kit is about 8 USD, even the ANI F200 Skull guns you can get a service kit for around 25 USD, that's one of the reasons I rate them, they work well and can be serviced for moderate cost, happy days 😉, cheers Boss ✌️
@peteshobbies5383 speaking of ANI, you might get a chuckle of the Ntools FX2 & FX1.
@bosshawg7427 OMG 😲, I've never seen them, I don't think they are copies. I think they are the real thing. I can only find them in Poland, though 🤔
He has a following, I advise you and other brothers, personalities with a big difference, I got to know hvlp.lvmp lvlp .rp.hp. Each unit works in its place.
I agree 👍
❤❤❤@@peteshobbies5383