I also got the Blizzard 2.0 with the Flysky GT5. Had a problem with the mixer. The esc's would not turn Back on when i switched it off and back on again. I would have to unplug the esc's from the mixer and plug them back in and they will work again. Must be a glitch in the mixer. Did you use a brand name mixer?
I used a Turnigy vtail mixer, it was 15 usd off eBay. I haven't had a problem with them with the stock ESCs. I do have a slight glitch with castle ESCs where it would go directly in the calibration mode, but having the transmitter turned on before turning on the vehicle solves it. Did you disconnect the red wire from one of your ESCs? Perhaps it's over volting the system causing it to trip some sort of safety protection?.
@@CRCG_00 About the time I figured what made it work I went brain dead and went to the LHS guy. He wired in a dpdt switch in the ground wires on the esc's. Now plug in the battery, turn on vehicle switch and flip dpdt and we're good to go.
Nope, not at all. Currently I run it on 3s and 3500kv heli motors and stock drive train and tracks are completely fine, been running it for 3 winters now. Granted I keep it as light as possible and don't use it to push any snow. But it has been flawless so far.
I guess too niche of a product, it really only shines in snow. Otherwise solid axles crawl much better and individual suspension are better for bashing.
I also got the Blizzard 2.0 with the Flysky GT5. Had a problem with the mixer. The esc's would not turn Back on when i switched it off and back on again. I would have to unplug the esc's from the mixer and plug them back in and they will work again. Must be a glitch in the mixer. Did you use a brand name mixer?
I used a Turnigy vtail mixer, it was 15 usd off eBay. I haven't had a problem with them with the stock ESCs. I do have a slight glitch with castle ESCs where it would go directly in the calibration mode, but having the transmitter turned on before turning on the vehicle solves it.
Did you disconnect the red wire from one of your ESCs? Perhaps it's over volting the system causing it to trip some sort of safety protection?.
@@CRCG_00 Unsure what caused it.
@@CRCG_00 About the time I figured what made it work I went brain dead and went to the LHS guy. He wired in a dpdt switch in the ground wires on the esc's. Now plug in the battery, turn on vehicle switch and flip dpdt and we're good to go.
Have you ever had any issues with tracks tearing apart ?
Nope, not at all. Currently I run it on 3s and 3500kv heli motors and stock drive train and tracks are completely fine, been running it for 3 winters now. Granted I keep it as light as possible and don't use it to push any snow. But it has been flawless so far.
Why is it only giving out 40% on lipo
It just so I don't over stress and burn out the stock 370 brushed motors
Dont get why no brand make a quality version of this that is made for 2 or 3s with good good parts and electronics
I guess too niche of a product, it really only shines in snow. Otherwise solid axles crawl much better and individual suspension are better for bashing.
I agree I do not understand why somebody can't reproduce something just like the fast tracks with replaceable parts...come on traxxas