I absolutely loved this video and I appreciate when you and people like you do video tutorials like this. I am a student at Los Molinos CA. High School and my Agriculture Teacher Ms. Steagall would love this a lot keep up the good work
Amazing SW video showing interesting resources, specially "fillet". If fact, drawing curves surfaces and progressive fillet resources are always a challenge, but with perseverance anyone can do it - obviously for medium/high level SW learners. Thank you!
Can anyone help me out by explaining what exactly happened at 53:00.... I mean when we r getting the angular contact ball bearing into the graphics area from design library the actual size is small.How did it fit accordingly into the disc
I think there was excessive use of multi radius fillet when the operation could've been done with a loft through multiple profiles. I find the use of loft feature and guiding lines provides better control of the base geometry. I normally leave fillets and multi radius fillets to round up edges, not to define the geometry of the part.
Hello my friend and thank you for the video. I have a question. In the first part solidworks won't let me use the Hole wizard. Do you know why? Thank you
why when i try running stress analysis test the program says that there is an interference problem between the compressor cover and the compressor wheel *please help me i have a submission tmrw*
por que no compartes los colores? en cuanto idiomas quieres que te lo escriban si seras amable de compartir las apariencias? Can you share each apperance? Kannst du bitte es teilen ?
Hello there Can you help me? I get stuck when try to make the bearing I cant found any of it Can you tell me step by step to found the ball bearing? Thank you
Yeah i also cant find the bearings i have the solidworks tool box add in but for some reason the parts inventory does not include bearings which sucks cuz i have been making this turbo for like 3 hours lol
O ROLAMENTO ESA MAL DIMENSIONADO. O DIAMETRO INTERNO DO ROLAMENTO É MENOR QUE O DIAMETRO DO EIXO. QUER DIZER UM PROJETO QUE NÃO DARIA CERTO. PARA FINS DIDATICO É COMPLICADO ASSIM.
I absolutely loved this video and I appreciate when you and people like you do video tutorials like this. I am a student at Los Molinos CA. High School and my Agriculture Teacher Ms. Steagall would love this a lot keep up the good work
厉害啦
Amazing SW video showing interesting resources, specially "fillet". If fact, drawing curves surfaces and progressive fillet resources are always a challenge, but with perseverance anyone can do it - obviously for medium/high level SW learners. Thank you!
Best Channel for CAO ! Great work
Dear sir, Have no words for you !! Big Salute !!
Bro where is pdf of these 3d modelling??
un seguidor desde mexico haces un excelente trabajo con estos tutoriales. gracias !
very nice work
1:00:11 two holes not concentric. How to slove the problem.. Pls explain that
wow! this tutorial video is amazing!
Can anyone help me out by explaining what exactly happened at 53:00.... I mean when we r getting the angular contact ball bearing into the graphics area from design library the actual size is small.How did it fit accordingly into the disc
Please let us know any keyboard shortcuts used? Or How to get the desired size of angular contact ball bearing from design library?
great!!
can u show us the materials per part? thanks
x学习
Hi, Do you have a description of all of the individual parts?
I think there was excessive use of multi radius fillet when the operation could've been done with a loft through multiple profiles. I find the use of loft feature and guiding lines provides better control of the base geometry.
I normally leave fillets and multi radius fillets to round up edges, not to define the geometry of the part.
I would like to know the sources of drafting you have used to create the model.
¿Cómo le das ese efecto ultrabrillante a los modelos? Tengo solidworks 2015
thank you so much.i tried it and i got it
Why you didn´t show the material that use on any piece ? you must show us
The bearing of the pump shaft is not 3310 because the shaft has a diameter of 20 mm, so it must be 3320.
hi. Do you know engineering calculation of pump manufacturing?
if u do, can u please share it with me?
What is the appereance you utilizes, i like the goldish tone, but how do I create it, can you give the parameters of the colors?
Hello my friend and thank you for the video. I have a question. In the first part solidworks won't let me use the Hole wizard. Do you know why? Thank you
maybe because you haven't selected a surface or a plan at first ...
Can you show how right create drawings and specifications?
I have the 2D drawings. I did them following the tutorial, Write me to email: ticoarias57@gmail.com
me too. i'll write you.
why when i try running stress analysis test the program says that there is an interference problem between the compressor cover and the compressor wheel *please help me i have a submission tmrw*
hi !! good work , can you give me the definition of drawing for WHEEL Loader ?
What appearance in that solid?
Imazing design. But become more useful if explain every command in English.
Nice Sir like for you
Please speak dimensions also when you make the drawing.
If it is possible, can u share 2D technical drawing? Thanks.
Could you share the specification of your machine?
How can I access the technical drawings of these drawings?
Where is the impeller?
The impeller are the disks themselves. It is like a Tesla turbine
@@xeels2708hello man did you understand how this turbo works can you help me 😅
Can anyone will tell me that why these type of impellar is used ? Benefits?? efficient?? Plz tell me
can you send someone of this part dimensions?
why colors are not on my computer ?
I believe this is a Tesla pump, not a turbo pump
por que no compartes los colores? en cuanto idiomas quieres que te lo escriban si seras amable de compartir las apariencias?
Can you share each apperance? Kannst du bitte es teilen ?
can you please make a video of kiosk please
I did not find Tap Drills. How to get it. You can guide okay
how can i find the source file for this ?? Can anyone helep me
Hello there
Can you help me?
I get stuck when try to make the bearing
I cant found any of it
Can you tell me step by step to found the ball bearing?
Thank you
Yeah i also cant find the bearings i have the solidworks tool box add in but for some reason the parts inventory does not include bearings which sucks cuz i have been making this turbo for like 3 hours lol
@@alexdragota6890
First configure the toolbox. Then use it. Solidworks help has a detailed description.
can i get all of the dimensions for the parts
amazing
does anyone have the drawing?
Disculpa, me podrias pasar el plano de las piezas??
Yo tengo los planos de los despieces, los hice siguiendo el tutorial, escribeme a mi correo: ticoarias57@gmail.com
Luis Alberto Arias Echeverri me podrias pasar los planos bro¡ keyner.mec97@gmail.com
Good sw ...yar.
could share the E drawing?????????
Can u pls share u r 2D sketch pls
Where are the gaps?
36:05 de ne oldu anlamadım
bu parcaların teknık resımlerını nasıl bulabiliriz ya?
Plz share PDF file
hi i need totoriel rolle forminge
mersi
xin file part
Name of the components please, anyone 🙄
Anyone have a 2D drawing with dimensions?
You skipped part 5
43,45
trot bi1 le tutaux pour saulydewaurkce
Gaskets, anyone?
O ROLAMENTO ESA MAL DIMENSIONADO. O DIAMETRO INTERNO DO ROLAMENTO É MENOR QUE O DIAMETRO DO EIXO. QUER DIZER UM PROJETO QUE NÃO DARIA CERTO. PARA FINS DIDATICO É COMPLICADO ASSIM.
31.31
h好厉害