Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot
I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation. I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable). As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation). This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade. Now I know how to best mount my contact spokes for my Rotary Spark Gap!
Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need . Thank you again :)
please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration
Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming
I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?
I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks
Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!
Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!
Pretty cool how their Solidworks version isn't a buggy pile of garbage. Mine won't even run the simplest load analysis without crashing (High end machine with Xeon processor, 64GB RAM, and Nvidia P4000)
It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?
Good video but, I have a problem with the command Circular pattern in the time 32:18. I do the same procedure but, only the blade appears a a result. How can I get a solution?
@@leolopezc15 good job figuring a way around it , but i found that you need to do the combine command and then doing the pattern for (body) not (feature), like as in the video.
@@إبراهيمالهلالي-ش7ش Ok That's right. But, what I'm trying to explain there isn't an only way to make the blades. I'm learning Solidworks and there are a variety of commands that surprise me because they facilitate the design and make it faster.
@@leolopezc15 you can pattern one entity around it self and create a pattern, its an odd thing to grasp, but it comes in handy when doing such thing as a fan.
Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.
it was very help full, but 1 error is coming when i set boundary layer for simulation it gives error its not a boundary between solid and liquid i tried many different way by selecting rotation rei=gion as face and the frame as face
I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏
Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?
В отличии от симуляции, в реале работает по другому: разряжение происходит на всю длинну лопостей, на некотором расстоянии обнаружилась по диагонали обнаружилась отсутствие обдува от кулера.
7 ปีที่แล้ว +3
good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol
The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?
5 ปีที่แล้ว
i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.
sir at 53:43 all things just messed up... cursor is moving in different direction, process are going in different direction.... i had a very hard time understanding those stages
as far as I want to admit this is nice modeling, the CFD should not have been done this way. The CFD done here is no better than drawing random lines after the fan blades.
MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP
Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error) Thank you
I'm a German student who isn't interested in becoming an engineer but I have worked with solidworks before and really liked it. Now I would like to use it privately which leads to my question: Is there a way to get a free version that doesn't expire after year?
I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.
This 2 hour tutorial on a fan ended up in my recommended. Great!
Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot
Whats that Baloch in yua name.
Best Solidworks tutorials on the internet. Good music too.
I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation.
I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable).
As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation).
This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade.
Now I know how to best mount my contact spokes for my Rotary Spark Gap!
Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need .
Thank you again :)
please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration
sirji great work please do upload this type of videos more frequently, thank you for sharing great knowledge.
You forgot to make the inside wall of the fan blade a rigid wall as well
Amazing work, by the way, I was wondering if you have some tutorials related to CATIA's simulations?
They will help me a lot
Thank you sooooo much for this awesome flow simulation tutorial!!!!!!!!!
thanks expert
THANK YOU SO VERY MUCH FOR SHARING THIS EXPERIENCE WITH US, AND WISH TO SEE MORE
Thanks for the excellent video, very informative. I ask you a courtesy, can you tell me which band is playing the background music? Thank you.
Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming
That is awesome video. It helped me a lot, to figure out how to do some operations.
I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?
Cool. You did amayzing work. Thank you!
❤❤❤❤Excellent ❤❤❤❤
I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks
Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!
carry on your work.... and very very thanks for sharing this knowledgeable videos...☺
Thanks a bunch
Wow great video
Good job 😀👏
A Question: Could you calculate the applied force on the fan blade's shaft?
Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!
@@Gillambryce Excuse me. Have you done the tutorial? Could you help me to solve some troubles?
@@leolopezc15 if you're asking if I can help you with cad software or simulations like these, no. I'm more of a technical guy
@@Gillambryce I think they wanted axial force not radial force.
@@londonnight937 you know what I think you're probably right
Nice
instructions unclear i have a fanblade in my nose
It would be helpful if you provide us the Coil file or make another video for it.
How to simulate a waterwheel rotation without prescribing it's rotational speed? Like let it start moving due to river flow. Thanks.
crazy
What are the specifications of your Computer, sir?
Great video. A bit slow tho, but on point. Good job!
Pretty cool how their Solidworks version isn't a buggy pile of garbage. Mine won't even run the simplest load analysis without crashing (High end machine with Xeon processor, 64GB RAM, and Nvidia P4000)
can you tell me that from where you have taken these dimensions? It's important.
Hello sir, can i know why i cannot change the direction in rotating region even i put negative in the value. Hope you help me. Thank you.
good job. Well done
Cool. Thanks
It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?
great!! excelente muito bom , aprendi muito
Simulation seems wrong. Accelerating air should cause it to exit in a line - not "fan out"
Thanks for the video. What is the appearance you apply for each part?
Where are the links to videos of Motor, Coil and Ball Bearing ? Can somebody please reply with the links ?
Hey getting this error while running the simulation ""Warning! Unable to resolve the local rotating region". Can someone please help me to solve it?
Good video but, I have a problem with the command Circular pattern in the time 32:18. I do the same procedure but, only the blade appears a a result. How can I get a solution?
find any solution for that ?
Yes. First, I made the blade as it appears in the video. After, I used the circular pattern command and finally, I made the cylinder.
@@leolopezc15 good job figuring a way around it , but i found that you need to do the combine command and then doing the pattern for (body) not (feature), like as in the video.
@@إبراهيمالهلالي-ش7ش Ok That's right. But, what I'm trying to explain there isn't an only way to make the blades. I'm learning Solidworks and there are a variety of commands that surprise me because they facilitate the design and make it faster.
@@leolopezc15 you can pattern one entity around it self and create a pattern, its an odd thing to grasp, but it comes in handy when doing such thing as a fan.
Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.
it was very help full, but 1 error is coming
when i set boundary layer for simulation it gives error its not a boundary between solid and liquid
i tried many different way by selecting rotation rei=gion as face and the frame as face
this needs to have sound with it .. its quite hard to follow the tutorial with audio. Otherwise great tutorial.
how did you get that rotating regions
SolidWorks Tutorial #262 : Rotor (coil wiring) 1:22:46
link : th-cam.com/video/WbdnxArZQ3g/w-d-xo.html
Thanks men. I was scared.
Hey man will i make full motor or only rotor coil wiring made seperately?
on my computer, at the "wizard - Analysis Type" window, the rotation value didn't appear. could you explain why?
Did you solve this problem?
I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏
Estoy impresionado, muy bueno!
Disculpe, he tratado de seguir el mismo procedimiento pero he tenido algunos tropiezos, ¿ha podido hacerlo?
35:52 How do you rotate it like that?
It's space mouse. Worth 30,000 ₹ 😅😅
I having problems with the CUT-REVOLVER.........what is the distance???
where can i find coil tutorial??
hey... does anybodu know waht is the coloor or the material for the first piece???
Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?
very good
Do you have a simulation of a Static Mixer tutorial?
which version of this solidworks ?????
В отличии от симуляции, в реале работает по другому: разряжение происходит на всю длинну лопостей, на некотором расстоянии обнаружилась по диагонали обнаружилась отсутствие обдува от кулера.
good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol
The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?
i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.
Yes you can, just press Import in 3DS and select polygon quantity.
You know from the air flow chart this fan would work better if it was put on backwards.
sir at 53:43 all things just messed up... cursor is moving in different direction, process are going in different direction.... i had a very hard time understanding those stages
Юб
as far as I want to admit this is nice modeling, the CFD should not have been done this way. The CFD done here is no better than drawing random lines after the fan blades.
thank you
MY VERTICAL WIND MILL PROJECT DETAIL
FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS
AIR DANCITY 241
WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND
HOW CALCULAT RPM
HOW MUCH RPM GENARATE
PLZ HELP
thank you !!
but how can you calculate the work done
why i can noy enter your website?
Sir we have same fan
You have any idea to repair it
Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error)
Thank you
The rotor surface need set real wall(no-slip)
I'm a German student who isn't interested in becoming an engineer but I have worked with solidworks before and really liked it. Now I would like to use it privately which leads to my question: Is there a way to get a free version that doesn't expire after year?
There are open source CAD softwares. Look for them.
of course there is ways to get it free but those ways are illegal
Why no sound? it will be great if we hear it too
I'm having an error by trying to make a circular pattern on blades... "merge error" someone knows what could be?
I have combined all the parts as well
use body not faces & features
Will you give this solidworks file
Hola como cambias la dirección del vector adelante o atrás de los álabes? Cambiando el signo sólo cambia el sentido de giro de los álabes
Can you have the link for us to download the file
good
I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.
Perfect
👏
What is yourr workstation specification?
Cuantas piezas tiene?
Awesome, dear sir, what are specs of your computer I 'm using Ryzen 7 2700, does it to good for thermal - dynamics analysis.
34:30 try Shell feature next time
厲害
kindly upload pdf file of project. its help us for dimenshion
It's Great but PC Fan sucks air from inside and blows it to the outside, you did here that is vice versa.
thank bro
1:32:44 where can I get this?
can i do the same on catia?
Can I get the rotor? from 1:22:49
Where can i get all 2D drawings of this Assembly ?
Maybe Gosho Aoyama-Sama has some?
nice 1
Hi, what GPU do you have
2:14:20 song?
give me your first music name pls !