SolidWorks Tutorial
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- ►Rotor tutorial:► • SolidWorks Tutorial #2...
sw-tc.net/ solidworks tutorial 276 brushed DC motor.
Puting the previous rotor into action!
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
Hey there! i want to thank you for all the tutorials you do, although i dont do all of them they helped me to learn this program, and it keeps helping. You are awesome, keep it going!
Great works for all tutorial
Спасибо, получилось повторить полностью, очень полезные видео
The man. You are a god among engineers
Yes. He very pro. ....
Thanks. I just made this and the effort was worth it all because of you! :) Great Tutorials by the way!
So great tutorial for learning solidworks
Thanks for sharing this informative video. SolidWorkTutorials Rocks!
Hello, I wanted to ask them if they have any video that explains how to model a magnet, but assigning magnetic properties (north pole and the south pole), so that they can be seen in some simulation or mechanism (motion movie). Thank you very much.
Awesome, that's beautiful❗️
READ BEFORE YOU START THIS.
I'm so angry, first this DC motor is not this 1.30h video, but also the Rotor, which is 1.18h video additional.
I get pretty pissed when I'm finishing this video and then discover there is a second one you must do in order to finish the motor.
I do the rotor and surprise, in the final assembly the guy doesn't realize there are physical collisions (the rotor is crossing the case) so this design is physically impossible.
There are also many other collisions because the design is not well done since the guy never used "calculate physical interferences"
Nice video, thanks for sharing it :)
Error 1:54 . You need a horizontal size of 15mm, not a vertical size.
tks for this video
thank for video,it's great
Very nice thanks
Why don't you show appearences that you use, but besides that nice job, really great engineer :)
Thanx! Very usefull video!
What is it vertion?
Great!!!
Please make an AC motor
it's the same but you have to replace the magnet with a bobine
good luck
very good job, thanks for video. But in assembly, i experienced a problem at 1:06:34. when i try make coincident relation between magnet and cover i get fail. is there anyone who get the same fail?
please help!
Yes i fail also , please give me the solution
I started doing some of these examples. Yet, I couldn't figure it out how I can make the pieces shiny like in the tuts. I tried changing appearance, but it didn't work. Any help?
I figured it out. Realview graphics was disabled. I think Solidworks only support some of the quadro graphic cards. As I learned, we should add the card manually from some of computer settings to turn realview option on. Thanks Gabriel Davies anyways :)
Turn on realview graphics if not there then u can refer some youtube videos .hope this can help u☺️
You can use real hak for shrink
Part 2 looks like a camera case LOL.
Can u try to make a camera in Solidworks also?
Thanks!
Camera in solidworks very easy to use
Nice
could this dc motor be used for an electric bike hub motor with planetary gears ?
😱😱😱 perfecto
how to calculate can heat sink end bell armatures is fit?
can u please tell us the different btw SW2013 and SW2016 ?
You can see more different between 2016 and 2012 at ribbon toolbars
Bro plz give audio explanation
To select which one for which diagram
Awesome
Hello! I made the motor the way you did but could not run the 'Basic Motion'. When I run the simulation...it won't rotate. Please help!
may be your computer is so weak, so i couldnot run
Seach for add ins in solidworks and there is option for solidworks motion turn it on u will get option for motion analysis
I want to download this part...can you provide me link?
Mantaaapp👌😍👍
Hey. How do you get exact dimensions? Can you please share link or website?
Anyways, your videos are really great.
are there related files for this project? thanks.
If I want to download the motor ?
You can download those files on my channel. Solidworks tutorial hp
@@Solidworks_Tutorials bro is this motor on your channel & grabcad have exactly same dimensions as of Solidworks Tutorials channel's motor? I need readmade motor & rotor coil so i can make another things which uses dc motor & rotor coil in his another videos. Please ans
love the shiny metal looks, my laptop can't do that :(
which graphics card do you have?
If you are using any of the Nvidia GForce cards this link has a tutorial to fixing the issue.
grabcad.com/questions/how-to-active-solidworks-realview-graphics
I have no graphic card in my laptop. But i managed to get that appearance. Its called Real View graphics. You need to change the registry for that. There are many tutorials on TH-cam on how to change the registry to activate Real View Graphics.
can i download the file?
49
❤
1:05 st
17:50
29:50
43:00
46:20
Awesome
its awesome