This was a very well-done video. If I remember correctly from Bambu's site, they showed layer adhesion was better with PETG Basic, but it looks like your test showed otherwise. I just received my order of PETG HF yesterday, so I'm curious to try it out after it finishes drying.
Waking up early to test out filaments? What a guy! I appreciate that level of dedication. Also the vacation scene "thinking" about your deformation tests made me laugh out loud. New subscriber!
Glad to see it prints nice out of the box even though Bambu recommends drying first. I actually ordered a couple rolls the moment it hit the global site. Still waiting on mine to show up.
Bamboo has a “Dry out before use” statement in the Caution section under the description of this PETG-HF. I wonder if there’d be any difference in your results if it was dried out prior to testing. Thanks for the great video!
Thanks for the review Igor! And kudos to bambu for improving their PETG. I hope they release it in more colors like the PETG basic, but this seems like a great replacement.
Great comparative review as always! Would be great if you could review other High Speed PETG filaments. Elegoo Rapid PETG and eSun ePETG+HS, but there might be more. Elegoo is particularly interesting since it’s ~12€ per kg and available in both EU and US.
I'm wondering why the PETG reaches lower Energy in the Impact test? Normally it is said that PETG is more Impact resistant and that PLA is more brittle. Do you have an explanation for this?
Absolutely agree on the PLA Tough cancellation compared to the PETG-HF. Did you get early access to the material? I ordered mine within an hour of the release email and am hoping it arrives in the morning. I'm down to 3 rolls of PLA Tough... :( The PLA-Tough is slightly translucent but prints like a dream. I was wondering if they would replace it with something but I haven't seen anything yet, not even a PLA-GF.
I got the spools 2 weeks before promotion (and before my travelling as mentioned in the video). The PLA Tough is "replaced" with PLA basic. They have similar properties (tested in separate video), but I just need that great layer adhesion of Tough. I ordered 5 spools, when I saw that it will be discontinued.
I always have the problem of nozzle buildup with PETG or PCTG, does anyone know why this could be happening? Printer is P1S with 0,4mm nozzle and standard slicer settings. K-Ratio tuned to 0,038 and Flow ratio is "standard". In a matter of minutes, a blob forms on the nozzle. This effect is the strongest on the first layers i think but is also happening on all other layers.
I have a problem with the new filament. It is only recognized for 1 second in the AMS and then it is thrown out again and is unknown. You cannot manually enter the PETG-HF in the slicer because it does not appear on the list (latest version is installed). Only found in the list in the Bambu mobile app
I am little bit skeptical regarding this test, because on their website there is a table comparing petghf to petg and they say it has a little bit weaker layer adhesion.
@@MyTechFun Ok. Looks like you don't take criticism very well... I really appreciate the stuff you are doing and I like your videos because I see a lot of information from them. I just wanted to point out that just because you printed the filament with the same way, it doesn't mean it was the right way. Maybe the HF filament should be printed with different profile to achieve reference strength values and maybe the basic filament you printed the way that it's not how it should be printed and we get different test results.
@@EEEEMMMMKKKK I get used to criticism, I just feeled that I need to make a small joke on this. I agree about different layer adhesion, sometimes even different 3D printers have different affect. th-cam.com/video/_pPWvLizjRU/w-d-xo.htmlsi=k2c0IqGoS9f4IHyB
@@senurasenaratne5782 I made the same assumption which is where my wisdom comes from....the 50% speed mostly changes the quality of the outer wall and try to avoid grid infill it tends to hate PETG in my experience
so, I was linked this as proof that the petg hf was actually better as far as mechanical properties (despite the bbl website saying otherwise, dont bother with the joke pls). which is great and all, but it seems you have a sample size of one (or two) for most of these tests???? is that correct? no offense but a test with a sample size so small being cited as evidence is pretty bad. I can respect going out and actually doing the tests, but really man, if you want to do actual science and not youtube bait you should have a sample size of 10 for the mechanical tests at an absolute minimum. though stuff like temp isnt going to matter that much. there is just no way you are getting accurate numbers for layer adhesion with that few tests. (which is the part everyone cares about because BBL themselves say it is over 20% worse with HF, with layer adhesion already being its weakest property) even if it scores higher on average, if say there is a larger scatter with hf over the original with inconsistent layer adhesion that would be a massive detriment as a part is only as strong as its weakest point. I wouldnt really call an "average" of 2 data points and average, it should really be called a median, as an average would normally imply the kind of distribution typically associated with larger sample sizes.
I thought that too. But after few weeks I noticed that carboard spools will create a fine powder and that may go into teflon tube casing problems later. I cleaned everything and I am using 3D printed rings
I just bought 10 rolls of the HF. I won't be getting more. I go through 30+ rolls of petg per day. If I had to dry every roll before use, I'd never get anything produced. Petg needs to be strong and durable. It's not for priting fast. As far as I can tell, they had a good product with the basic, and someone came up with a really stupid, bad idea, and they went with it. Yay. Now I need to find a new source for good PETG.
I know you tested before the filament was added to the store so you could do nothing else but your standard left brain engineering tests. However the filament is being touted as being as printable as PLA (speed and quality) with the mechanical benefits of PETG, also that it’s more hydrophilic than normal PETG (so must be dried and kept dry during long prints). I’d love to see a follow up video in which the properties that matter to non-engineers are tested, maybe you could collaborate with an artist or designer to help activate the right side of your brain to test out the fun-ness of the filament. 😁
I always thought that HF variants would have worse creep but it's not the case here! Anyway I really wonder why would anyone use PETG on printers like X1/P1/Q1/K1 when ABS prints just as easy and has better properties from every point of view and it is in general cheaper than modified versions of any material. It also prints faster. Habits?
Have you ever printed ABS on an X1C and used a finer setting than 0.2mm, e.g. 0.16, 0.12 or even 0.0.8? Anything less than 0.2 makes totally strange sand dune-like patterns.
For me, PETG allows me to print indoors without worrying about needing ventilation like with ABS. Also, PETG warps way less and there's no shrinkage to compensate for. I'd like to have the setup for ABS/ASA in the future, but for now PETG is ideal for me.
@@jamesmc8055 petg shrinks not much less than ABS. Fumes are also not an issue unless you don't ventilate your room, which if true is a way bigger issue.
@@olafmarzocchi6194 true, all filament does shrink, but so far with Sunlu and Hatchbox PETG I haven't had any dimensional issues. I do ventilate, I have a large air scrubber running in the room, but even that plus a bentobox would sometimes fail to prevent ABS fumes to fill the room. Maybe I'm just very sensitive to ABS.
@@MyTechFun I was thinking about a Pi Zero with camera module pointed at the test pieces and have it capture an image every hour or so. You could then see it deform over time.
I think a major flaw with basically any of this testing is that it really doesn't show the full capabilities of any of the materials. This is due to the print profiles for a lot of these filaments simply being optimised for print quality rather than any kind of strength. It's still good to know how they compare in terms of defaults for the masses, I guess.
Love the idea but annoyed that I can't print with it even though I have 8 rolls sitting next to my printer. Bambu studio doesn't show a petg hf profile and I tried multiple times to update but says up to date. If I try to add it off my handy app it's switches to generic abs
So you test High Flow material and do not test the max volumetric flow of it?! Who says it is double the flow, did you test it? I print regular petg at 20-30 on qidi xplus3
@@radish6691 you are talking to me?? I am not a TH-camr.... If someone does a video which popularizes a filament because it is high flow, then he should prove it. I am just saying that everything shines in comparison and gave my numbers. How about you do a video of how you criticize someone
Temperature resistance, outdoor use, more water resistant, less creeping on 30-35°C... (try to print something from PLA and PETG and leave it in car on hot summer day)
Your “I cleaned it with isopropyl” comment makes it seem like you think the glue is to help the filament adhere to the bed. They don’t recommend glue for adhesion. They recommend glue as a release agent, to stop it from sticking TOO well to the PEI. One unlucky print without glue and your PEI sheet will be ruined. Just get their liquid glue already. It just rinses off with water afterwards.
More than 5 years I am printing PETG on textured PEI (starting with Prusa MK3). I never used glue on it. And yes, glue will help in some cases with adhesion. Personal experience, I don't care what "they recommend".
@@MyTechFun Next time you print something with a very large, flat surface that is usually difficult to get off the bed, use some glue. It will come off VERY easily. That's the whole point. It isn't to help adhesion. It is to make adhesion worse after the print is finished. It is called a "release agent" in that case. "I've never tried it so I don't need to." is not a good thing to say. You don't learn anything by saying "I already know something." You don't know everything. Just like the rest of us.
thumbs up for filming at 5am, that's commitment!
30c is room temperature? 😬
20C is room temp. And this temp currently I have only in the morning
@@MyTechFun Great content btw (not just this video but your channel as a whole). Thanks.
First comparative review I've seen on the new HF PETG and it comes from one of my most trusted sources.
Thanks Igor!
Thanks for the video, very interesting that they achieved similar or better mechanical properties in the HF version compared to the basic version!
Good to know they are actually replacing a product with something better!
I was hoping Bambu sent you a sample for these tests. Great looking filament.
I always printed Gembird PETG at 265 C, layer adhesion is very strong, things break, do not delaminate.
This was a very well-done video. If I remember correctly from Bambu's site, they showed layer adhesion was better with PETG Basic, but it looks like your test showed otherwise. I just received my order of PETG HF yesterday, so I'm curious to try it out after it finishes drying.
As soon as i run out of PETG BASIC I'll order the HF. The HF should save me considerable time printing 👍🏻 thanks for the comparison and review
Waking up early to test out filaments? What a guy! I appreciate that level of dedication.
Also the vacation scene "thinking" about your deformation tests made me laugh out loud. New subscriber!
Thank you! Yes, I tried to put some of reality into video.
Glad to see it prints nice out of the box even though Bambu recommends drying first. I actually ordered a couple rolls the moment it hit the global site. Still waiting on mine to show up.
Bamboo has a “Dry out before use” statement in the Caution section under the description of this PETG-HF. I wonder if there’d be any difference in your results if it was dried out prior to testing. Thanks for the great video!
When I started the testing, there was no info on the website. I like to test PETG out of the box.
It's the case for majority of filaments. The effect varries. It only is required when you experience bad print quality.
great testing and I hope you had fun on your vacation :)
It was nice (Croatian Adriatic Sea) but it was too short
@@MyTechFun ah yes it looked familiar :) it is always too short 😊
Thanks for the review Igor!
And kudos to bambu for improving their PETG. I hope they release it in more colors like the PETG basic, but this seems like a great replacement.
Great comparative review as always!
Would be great if you could review other High Speed PETG filaments. Elegoo Rapid PETG and eSun ePETG+HS, but there might be more.
Elegoo is particularly interesting since it’s ~12€ per kg and available in both EU and US.
Damn, you're almost my neighbor, greetings from the 11th district and cool test !!!
Igen, Köszi. Üdv!
Great video! Not a lot of early videos on this new filament
I'm wondering why the PETG reaches lower Energy in the Impact test? Normally it is said that PETG is more Impact resistant and that PLA is more brittle. Do you have an explanation for this?
Loved the video, and appreciated the humour too 😂
Oh, finally somebody noticed (and commented) it :-) Very often my jokes (in videos or in thumbnail images) are too "hidden" for the mass.
Thank you.
anyone know what the profile settings are for this as PETG HF is not showing up in my bambustudio application and the ams is showing "?"
As I remember the data from BambuLab they differ a lot. Especially at layer adhesion.
When I got the filament, there was no info on the website. If I would know this, I would correct my testing method to get those data. (joke)
@@MyTechFun Haha! Thanks to your tests I will buy some rolls for testing.
Thank you also for all your other videos!
Super interesting thank you very much.......... hello from France......👍👍👍😉
My Tech Fun is on fire from 3 point range...
Absolutely agree on the PLA Tough cancellation compared to the PETG-HF. Did you get early access to the material? I ordered mine within an hour of the release email and am hoping it arrives in the morning. I'm down to 3 rolls of PLA Tough... :(
The PLA-Tough is slightly translucent but prints like a dream. I was wondering if they would replace it with something but I haven't seen anything yet, not even a PLA-GF.
I got the spools 2 weeks before promotion (and before my travelling as mentioned in the video). The PLA Tough is "replaced" with PLA basic. They have similar properties (tested in separate video), but I just need that great layer adhesion of Tough. I ordered 5 spools, when I saw that it will be discontinued.
Do you have a link for the 3mf file? My Bambu studio keeps forgetting the filament type from the rfid tag and switches it back to PLA basic?
Uploaded here (this I got from BL): www.mytechfun.com/video/382
I always have the problem of nozzle buildup with PETG or PCTG, does anyone know why this could be happening? Printer is P1S with 0,4mm nozzle and standard slicer settings. K-Ratio tuned to 0,038 and Flow ratio is "standard". In a matter of minutes, a blob forms on the nozzle. This effect is the strongest on the first layers i think but is also happening on all other layers.
I bought cleaning filament works well for me also I do a cold pull once in a while there are videos on how to cold pull clean.
for me it happens mostly when my filament isn't perfectly dried
@@joshmedeiros7594 Even with new nozzles this happens to me.
@@tommihommi1 The thing is, that even with new filament, this behaviour occurs.
I have a problem with the new filament. It is only recognized for 1 second in the AMS and then it is thrown out again and is unknown. You cannot manually enter the PETG-HF in the slicer because it does not appear on the list (latest version is installed). Only found in the list in the Bambu mobile app
Super test! I was curious if that HF was only hipe... What nozzle have you used?
Default on P1P.
I am little bit skeptical regarding this test, because on their website there is a table comparing petghf to petg and they say it has a little bit weaker layer adhesion.
Oh, I didn't know that, when I started with the video, there was no website about PETG-HF. If I know, I would adjust my testing method...
(joke)
@@MyTechFun Ok. Looks like you don't take criticism very well... I really appreciate the stuff you are doing and I like your videos because I see a lot of information from them. I just wanted to point out that just because you printed the filament with the same way, it doesn't mean it was the right way. Maybe the HF filament should be printed with different profile to achieve reference strength values and maybe the basic filament you printed the way that it's not how it should be printed and we get different test results.
@@EEEEMMMMKKKK I get used to criticism, I just feeled that I need to make a small joke on this. I agree about different layer adhesion, sometimes even different 3D printers have different affect. th-cam.com/video/_pPWvLizjRU/w-d-xo.htmlsi=k2c0IqGoS9f4IHyB
Any way you can find out what they’re using for pigment of different colors of PETG?
Is the texture looks matte or its just the camera?
Matte
Does the PETG-HF have a bit of a matte finish or is it just me?
Yes, the website also mentions a matte finish
@@KiwiSTG Thanks! I just saw that as well. I may have to grab some.
They must have rushed to get those to you as I use mostly refills and never had the end of the filament loose like that
i bought my p1s to print witth petg but it was flaky and had a lots of problems. lets hope this will help.
helps a ton if you dry your filament and print at 50% speed
@@ThePesmat yeah I naively assumed a brand new spool out of the box didn’t need drying.
@@senurasenaratne5782 I made the same assumption which is where my wisdom comes from....the 50% speed mostly changes the quality of the outer wall and try to avoid grid infill it tends to hate PETG in my experience
Id love to know your thoughts on PET-CF. It looks equal to or better than PA6-CF in some ways. Thanks Igor!
Pet cf, pa6 cf, gf soon..
@@MyTechFun wonderful! Thank you!
Why is PLA crushing these tests compared to PETG? Isn't PETG known to be much stronger than PLA?
so, I was linked this as proof that the petg hf was actually better as far as mechanical properties (despite the bbl website saying otherwise, dont bother with the joke pls). which is great and all, but it seems you have a sample size of one (or two) for most of these tests???? is that correct?
no offense but a test with a sample size so small being cited as evidence is pretty bad. I can respect going out and actually doing the tests, but really man, if you want to do actual science and not youtube bait you should have a sample size of 10 for the mechanical tests at an absolute minimum. though stuff like temp isnt going to matter that much. there is just no way you are getting accurate numbers for layer adhesion with that few tests. (which is the part everyone cares about because BBL themselves say it is over 20% worse with HF, with layer adhesion already being its weakest property) even if it scores higher on average, if say there is a larger scatter with hf over the original with inconsistent layer adhesion that would be a massive detriment as a part is only as strong as its weakest point.
I wouldnt really call an "average" of 2 data points and average, it should really be called a median, as an average would normally imply the kind of distribution typically associated with larger sample sizes.
Can I use the elegoo cardboard spool in AMS? It has a kind of coating on the edges
i mostly use Polymaker which has similar spools and never had issues at all ever.
I thought that too. But after few weeks I noticed that carboard spools will create a fine powder and that may go into teflon tube casing problems later. I cleaned everything and I am using 3D printed rings
Can you use it on p1p ?
As shown in the video, this whole test was printed on stock P1P
I just bought 10 rolls of the HF. I won't be getting more. I go through 30+ rolls of petg per day. If I had to dry every roll before use, I'd never get anything produced. Petg needs to be strong and durable. It's not for priting fast.
As far as I can tell, they had a good product with the basic, and someone came up with a really stupid, bad idea, and they went with it. Yay. Now I need to find a new source for good PETG.
I am on the same situation. Which one are you using now?
@@davosmarcado I'm back to overture petg.
Does anyone know what the PETG is mixed with to make it HF?
Why it's mixed with HF, of course!
I know you tested before the filament was added to the store so you could do nothing else but your standard left brain engineering tests. However the filament is being touted as being as printable as PLA (speed and quality) with the mechanical benefits of PETG, also that it’s more hydrophilic than normal PETG (so must be dried and kept dry during long prints). I’d love to see a follow up video in which the properties that matter to non-engineers are tested, maybe you could collaborate with an artist or designer to help activate the right side of your brain to test out the fun-ness of the filament. 😁
I would love if you would do transparent/natural they (gave like)
I could test only what they sent me. I couldn't even buy them a few weeks ago.
@@MyTechFun transparent is almost always the strongest since it is the purest, please do if you have the chance :)
I always thought that HF variants would have worse creep but it's not the case here!
Anyway I really wonder why would anyone use PETG on printers like X1/P1/Q1/K1 when ABS prints just as easy and has better properties from every point of view and it is in general cheaper than modified versions of any material.
It also prints faster.
Habits?
Have you ever printed ABS on an X1C and used a finer setting than 0.2mm, e.g. 0.16, 0.12 or even 0.0.8? Anything less than 0.2 makes totally strange sand dune-like patterns.
For me, PETG allows me to print indoors without worrying about needing ventilation like with ABS. Also, PETG warps way less and there's no shrinkage to compensate for. I'd like to have the setup for ABS/ASA in the future, but for now PETG is ideal for me.
@@jamesmc8055 petg shrinks not much less than ABS. Fumes are also not an issue unless you don't ventilate your room, which if true is a way bigger issue.
@@olafmarzocchi6194 true, all filament does shrink, but so far with Sunlu and Hatchbox PETG I haven't had any dimensional issues. I do ventilate, I have a large air scrubber running in the room, but even that plus a bentobox would sometimes fail to prevent ABS fumes to fill the room. Maybe I'm just very sensitive to ABS.
Don't have to worry about ventilation and warping. And I hear that ABS leaves gunk in your printer if you print alot of it
Next time could you have a camera running all the time and do a time lapse to check the deformation?
I needed the camera on my vacation 😀
@@MyTechFun I was thinking about a Pi Zero with camera module pointed at the test pieces and have it capture an image every hour or so. You could then see it deform over time.
I think a major flaw with basically any of this testing is that it really doesn't show the full capabilities of any of the materials. This is due to the print profiles for a lot of these filaments simply being optimised for print quality rather than any kind of strength. It's still good to know how they compare in terms of defaults for the masses, I guess.
Correct, but this is what "masses" will do. Load the default settings and start with printing, and this is what I am testing in most cases.
Love the idea but annoyed that I can't print with it even though I have 8 rolls sitting next to my printer. Bambu studio doesn't show a petg hf profile and I tried multiple times to update but says up to date. If I try to add it off my handy app it's switches to generic abs
So you test High Flow material and do not test the max volumetric flow of it?!
Who says it is double the flow, did you test it?
I print regular petg at 20-30 on qidi xplus3
Please perform the tests you demand. I look forward to your results video.
@@radish6691 you are talking to me?? I am not a TH-camr....
If someone does a video which popularizes a filament because it is high flow, then he should prove it.
I am just saying that everything shines in comparison and gave my numbers.
How about you do a video of how you criticize someone
@@vim55k What criticism?
Why do we use PETG anything? In almost all the tests, PLA performed better.
Temperature resistance, outdoor use, more water resistant, less creeping on 30-35°C... (try to print something from PLA and PETG and leave it in car on hot summer day)
I wonder what it actually is since bambu doesn't manufacture filaments themselves, would be funny if they are just elegoo rapid petg
I've heard bambu is esun but they couldve changed their manufacturer.
Your “I cleaned it with isopropyl” comment makes it seem like you think the glue is to help the filament adhere to the bed. They don’t recommend glue for adhesion. They recommend glue as a release agent, to stop it from sticking TOO well to the PEI. One unlucky print without glue and your PEI sheet will be ruined. Just get their liquid glue already. It just rinses off with water afterwards.
More than 5 years I am printing PETG on textured PEI (starting with Prusa MK3). I never used glue on it. And yes, glue will help in some cases with adhesion. Personal experience, I don't care what "they recommend".
@@MyTechFun Next time you print something with a very large, flat surface that is usually difficult to get off the bed, use some glue. It will come off VERY easily. That's the whole point. It isn't to help adhesion. It is to make adhesion worse after the print is finished. It is called a "release agent" in that case. "I've never tried it so I don't need to." is not a good thing to say. You don't learn anything by saying "I already know something." You don't know everything. Just like the rest of us.
Wash your plate with dish soap. It’s a pain but better than using alcohol.