Thanks a lot Joseph, I appreciate your support. People like you drive me to post more content and put as much effort in my tests as I can. Take care and happy new year!
Skyzone x2 seemed better at range but rapid beat it with interference. Just guessing by video. Only thing I like about the 4 antennas is patch antenna pointing different directions . So higher gain antenna covering wider angle
1.5km on 25mw is very impressive, both performed great! If I had to choose I’d go for quadversity for the versatility. Great comparison, happy holidays and stay safe.
Thanks for another great review Gal. Throughout the video like @ 6:39 (look at white pole at 3 o-clock in right side center) I'm seeing the SteadyView quadversity presenting much better contrast detail especially with seeing wires at 6:40 where at 6:41 you can't even see the 3rd wire with the RapidFire. Very impressive distances being achieved on 25mw and shows in some situations the extra two antennas could avoid a crash and a long walk.
@@KremerFPV Thank you... and almost forgot to mention this @ 10:22 th-cam.com/video/SrrUNGr4uoM/w-d-xo.html Don't tell anyone as his reviews are usually spot on and I guess he was too busy to watch yours;-)
Hey Gal, have a nice holiday season and take care! What vtx train would you recommend for flying indoors with whoops? Doesn't necessarily have to be one of the solutions in the video :)
hey Gal.i love your no nonsense approach,very straight forward.what camera would be good for quadversity on 2 steadyviews,i hear some cameras aren't very compatible.i was looking for a caddx ratel v2 or foxeer razor mini.or any other u recommend.i am building a light weight 5 inch and need a good wide fov for high speed videos of cars.so viewing angle is also important.i would highly appreciate your advice.
Hi, thanks Captain! The Caddx Ratel V2 is a great camera - I'm just not 100% sure that you are not going to encounter issues when using it with the Skyzone goggles. They had some colors issues and they (Skyzone) might have already fixed it in a firmware update. Unfortunately I do not have these googles anymore so I can't confirm if the latest firmware update fixes this issue or not. As far as I know though - it shouldn't have a problem with the Razor Mini so maybe you can just go for this camera instead :-)
Hey Gal- great review as always. So much time and effort. I do have a question about the Steady View receiver. Does it need to be calibrated when it’s new? If so- how is that done. Mine doesn’t get very good reception- especially when my drone is close by. I’m using a long circular polarized antenna and a pick patch antenna. Any help would be greatly appreciated. Thanks Gal Stewart Hanson
Thanks a lot Stewart. I don't think that it has to be calibrated, but in case you are experiencing issues, I suggest updating the firmware of the Steadyview receiver: www.skyzonehobbies.com/download.html I am not sure if it's possible to calibrate the Steadyview receiver. I will double check it with Skyzone.
I have those old goggles too! They have served me well. With the DJI V2 digital FPV goggles rumored to be released soon, I highly recommend not buying into a not too long to be dead analog technology! I've saved my money and am ready to buy digital when the V2's comes out. With the close to year ago leak, from the Jan. 2020 consumer elections show, saying DJI is coming out with a 20x20mm AIO DIGITAL single board option that will retail for around $50, buying analog seems like a total waste of money. After those two releases I believe analog will completely die and be gone in 2, at most 3 years. I have a ton of experience dealing with newly emerging technologies, because I was in the electronics industry for well over 30 years. Analog will die. What happens is more and more digital products hit the market and manufactures see sales of analog dwindle. They then slowly but surely stop producing it because sales sag, and products don't sell fast enough to warrant keeping them around and producing more. So they discontinue it. Happens all the time. Thousands of times over my career. It will definitely happen to analog FPV, without a doubt! So, buying into a dead end technology is a short term, but very expensive proposition! 😩 🕊️ For nearly the same amount of money you'll be able to buy the V2 digital goggles! People sometimes complain that it's not the goggles that are too expensive, but the "Air Unit", but with that 20x20mm AIO digital board on the way, that won't be the case anymore. Neither will equipping micro quads and who0ps with digital! So, my friend, think very, very hard about whether you want to throw money at a soon to be antiquated technology. Me, I haven't been spending hardly anything on analog products this entire year! Certainly not over $100. I truly think both of these new digital products will be released by Springtime. 🤔😎🤘 Happy New Year! 😁
@@noforyoutubepremium3108 Thanks for the suggestions my friend, but I personally refuse to support DJI, so I'm waiting until other systems catch up to them in the digital field, myself. Happy holidays to you as well 😁
Thanks Jeff! Depending on the price, you might want to get the SKY04X as they feature a higher resolution screen, which makes them a better option in case you will decide to go for the Shark Byte system.
@@KremerFPV That's a great point, too, actually, and yes, the shark byte system has my eye so far, as better cameras seem to be coming out for it. I also prefer the analogue-like breakup of that system, rather than the blackout at range of the DJI system!
Great video. It seem that the steadyview did better. I just got my skyzone04x. Which combo will you recommend today as far as using both receiver slot on the skyzoneo4x. The steadyview comes with the unit so should I just get a second steadyview or a long range module or the rapid-fire .
Thanks! I would recommend to get another Skyzone module instead of purchasing an RF module. It will still be a good setup for long range as you can use 3 patch antennas and 1 omni.
Gal, are the two modules you have exactly the same when you look at them? I saw some other info that says the machine and skyzone mode is different. Also did you have the 4 rssi bars on the goggle osd? Thanks
Yes, I got the 4 RSSI bars on the OSD and I can confirm that the modules are 100% identical. The goggles (EV300O & SKY04X) are using a different firmware which probably only differs in the startup logo.
Interesting comparison would be how they both deal with multipath in closed spaces when you push the output power on the VTX this is supposed to be the biggest strength of the rapidfire.
Hi Gal ! Hope your fine. I know that your video have been post since a while but do you know what is the best firmware version for quadversity steadyview mix? Have a lot of Color switching issue and test a lot of version without be satisfied. Or do you use only quadversity mode ? Thank’a for your reply and your word.
Hi there! Sorry but I don't have these goggles anymore... The best option is to reach out directly to Skyzone and see what they have to say. If you don't get a response ping me and I'll see what I can do.
Gal, I really appreciate the time and effort you took to make this great comparison video. Thank You!. But as a new Skyzone 04X owner I'm most interested in what I believe you are referring to as their Steadyview X2 module and I hope it comes with a link to a goggles firmware update able to support fusing all 4 RF inputs into the 04X screen.. however I don't see any link to it in your "MORE" affiliate links, nor on Banggood.com .. does such a Skyzone compatible module exist? where can I get it please? Sorry if I'm just missing it somehow.
My pleasure Jim. The RapidMIX (which is linked in the description) will fit your SKY04X as it's 100% completely identical to the Skyzone Steadyview receiver. I hope it helps :-)
My module covers do not stay on good, you can easily wiggle the receiver and cover loose, anyone else experience this ? I don't see replacement options out there anywhere
hi Gal. i got my skyzone 04L,and i have been experimenting the difference between normal and steady view x..i am using 2 stready view receivers.and thought i could figure which mode is best at 25mw quadversity at point of poor signal.i cant tell difference.thanks
@@KremerFPV what is the difference between the 2 modes ( normal and steady view x) when using 2 receivers.i cant find an answer nor see a noticable difference.much appreciated 👍
To be honest I didn't see that Quadversity is better)) Here it was necessary to do a blind test, because when a new model is announced, you subconsciously expect a miracle from it. Barnum effect however... Thanx for new video.
100% well said. There where little moments where rapid fire did better. I bet the brown iut in turning round was more to do with docker postion. There was nothing in it.
Nice test, I was wondering if you could also test just 1 rapidmix receiver against the rapidfire as nobody has done a test like this, maybe when you do the multipathing test?
Thanks. I will test it too in the near future. In my experience as I said the RF beats a single RapidMIX / Steadyview receiver but I might post a video to verify it.
Hey Gal, nice informative review as always! Thank you. I would be very interested in this module but i don't see any buttons or joystick on it, so i guess it will not be compatible with my Skyzone Sky03o with the external module adaptor. Right?
Thank you for great review.. for quadversiy upgrade did you just attach another ramidmix module? Or did you perform any software upgrade for quadversity?
I didn't test the Cobra S, but I think that they will be better than the EV800D. If you can afford it, it's probably better to go with the Cobra X (Better screen and DVR).
@@KremerFPV I did and it was bad then. Upgraded to v2.2 and that was slightly better still not great. Got hold of v2.0 but havent updated to it yet will see if that works
Couple months later and I've tried everything with no luck. I get screen rolls and colour glitches when using mix and sometimes I even get rolls during diversity
On range the rapidfire dropped out before the steadyview o_O I just ordered a Sky04x because I'm neither happy with the HDO2 touching my eyelashes nor with the orqa because of the barrel distortion / tunnel view. From what I saw the Sky04x have the better image quality. Can't wait till they arrive!
No different. The range test signal loss when turning round i bet was more to do with where the the rapid fire module was placed in the docker Think about it. If it was on his head u bet it would of been the same. There where little moments where rapid fire was clearer also. Fusion rapid fire steady view we are talking Nothing in it not something as dramatic as de throning. 🤣🤣
@@KremerFPV Looking forward to it ;) Also, the steadyview receiver is also the same as the Skyzone Cobra X Box Goggles right? or this one has quad antennas?
I too have those old Aomway goggles. They have served me well. With the DJI V2 digital FPV goggles rumored to be released soon, I highly recommend not buying into a not too long to be dead analog technology! I've saved my money and am ready to buy digital when the V2's comes out. With the close to year ago leak, from the Jan. 2020 consumer elections show, saying DJI is coming out with a 20x20mm AIO DIGITAL single board option that will retail for around $50, buying analog seems like a total waste of money. After those two releases I believe analog will completely die and be gone in 2, at most 3 years. I have a ton of experience dealing with newly emerging technologies, because I was in the electronics industry for well over 30 years. Analog will die. What happens is more and more digital products hit the market and manufactures see sales of analog dwindle. They then slowly but surely stop producing it because sales sag, and products don't sell fast enough to warrant keeping them around and producing more. So they discontinue it. Happens all the time. Thousands of times over my career. It will definitely happen to analog FPV, without a doubt! So, buying into a dead end technology is a short term, but very expensive proposition! 😩 🕊️ For nearly the same amount of money you'll be able to buy the V2 digital goggles! People sometimes complain that it's not the goggles that are too expensive, but the "Air Unit", but with that 20x20mm AIO digital board on the way, that won't be the case anymore. Neither will equipping micro quads and who0ps with digital! So, my friends, think very, very hard about whether you want to throw money at a soon to be antiquated technology. Me, I haven't been spending hardly anything on analog products this entire year! Certainly not over $100. I truly think both of these new digital products will be released by Springtime. 🤔😎🤘 The only reason they aren't here already is the pandemic, and the way it has slowed sales with so many people out of work or struggling and spending way less on none essentials. Now that a vaccine is here, I believe new excitement will follow!!! Happy New Year! 😁
Why you did not put both patch on the same reciever and both omni on the other reciver. I belive it is the best way for image quality. If 1 reciever have a patch and a omni, when you will fligth outside the rage of 1 antenna, the reciever will not be able to mix the signal. With the 2 patchs in the same direction, the reciver will be able to match both signal and get you a better image.
Steady view is not worthy. Me and another youtuber have discovered there is a major manufacturing flaw that skyzone refuses to help with. I had two of them with this problem. If you get a good receiver (or were sent one for review) you are all set. Otherwise you are screwed with extreme ghosting due to some sort of cross interference, and color blowout on on a regular basis. I had to purchase a 35 dollar AKK receiver to make sure I am not insane and guess what? Issues are gone! Stay away from steadyview!
![☀ Правильные антенны на FPV очки. Какую связку выбрать? [FPV Goggles Antennas]](http://i.ytimg.com/vi/-K7LmlSJn-c/mqdefault.jpg)
![☀ Правильные антенны на FPV очки. Какую связку выбрать? [FPV Goggles Antennas]](/img/tr.png)
I will post another test soon where I will be pushing the range to the limit. Stay tuned ;-)
Hi Gal just heard that they have banned 5.8 GHZ there is that true ?
@@dougbrokeit7406 where? That's the most common wifi signal
@@divingfalconfpv4602 israel
Pro tip : you can watch series at Flixzone. I've been using it for watching a lot of movies during the lockdown.
@Cedric Samir yea, been using flixzone} for years myself :D
That's a lot of work you did to do this test. Thanks your reviews are always very good
I am glad you appreciate it as this is my reward. Happy flying!
You have the best testing methods. I use your videos to know what I want to purchase next. And your flying locations are fantastic. Thanks!
Thanks a lot. I am really glad that I am able to help you out.
Happy flying!
Short, sweet, and logically straight to the point. Excellent, Gal! Exactly the information I needed.
Fantastic flying and testing, Gal! Awesome! 😃
Happy new year! And stay safe there with your family! 🖖😊
Thanks Mario, take care!
Thank you Gal for all the research and hard work. Once again a beautifully done review. Your technical skills never cease to amaze me! Happy flying!
Thanks a lot Joseph, I appreciate your support.
People like you drive me to post more content and put as much effort in my tests as I can. Take care and happy new year!
Skyzone x2 seemed better at range but rapid beat it with interference. Just guessing by video.
Only thing I like about the 4 antennas is patch antenna pointing different directions . So higher gain antenna covering wider angle
Impressive! Thanks for all of your effort! Happy New Year! 😎🤘
As always, it's my pleasure! Happy new year buddy!
1.5km on 25mw is very impressive, both performed great! If I had to choose I’d go for quadversity for the versatility. Great comparison, happy holidays and stay safe.
Thanks a lot! 👍
Thanks for another great review Gal. Throughout the video like @ 6:39 (look at white pole at 3 o-clock in right side center) I'm seeing the SteadyView quadversity presenting much better contrast detail especially with seeing wires at 6:40 where at 6:41 you can't even see the 3rd wire with the RapidFire. Very impressive distances being achieved on 25mw and shows in some situations the extra two antennas could avoid a crash and a long walk.
My pleasure John. Thanks for sharing your thorough input!
@@KremerFPV Thank you... and almost forgot to mention this @ 10:22 th-cam.com/video/SrrUNGr4uoM/w-d-xo.html Don't tell anyone as his reviews are usually spot on and I guess he was too busy to watch yours;-)
Great review particularly with the side-by-side video comparison.
Thank you!
Awesome.thanks for the side by side comparison
No problem 👍
Hey Gal, have a nice holiday season and take care!
What vtx train would you recommend for flying indoors with whoops?
Doesn't necessarily have to be one of the solutions in the video :)
Hi Gertsch, what do you mean - a complete setup?
Happy holidays and feel free to message me directly through Patreon.
hey Gal.i love your no nonsense approach,very straight forward.what camera would be good for quadversity on 2 steadyviews,i hear some cameras aren't very compatible.i was looking for a caddx ratel v2 or foxeer razor mini.or any other u recommend.i am building a light weight 5 inch and need a good wide fov for high speed videos of cars.so viewing angle is also important.i would highly appreciate your advice.
Hi, thanks Captain!
The Caddx Ratel V2 is a great camera - I'm just not 100% sure that you are not going to encounter issues when using it with the Skyzone goggles. They had some colors issues and they (Skyzone) might have already fixed it in a firmware update. Unfortunately I do not have these googles anymore so I can't confirm if the latest firmware update fixes this issue or not.
As far as I know though - it shouldn't have a problem with the Razor Mini so maybe you can just go for this camera instead :-)
Hey Gal- great review as always. So much time and effort. I do have a question about the Steady View receiver. Does it need to be calibrated when it’s new? If so- how is that done. Mine doesn’t get very good reception- especially when my drone is close by. I’m using a long circular polarized antenna and a pick patch antenna. Any help would be greatly appreciated. Thanks Gal
Stewart Hanson
Thanks a lot Stewart. I don't think that it has to be calibrated, but in case you are experiencing issues, I suggest updating the firmware of the Steadyview receiver: www.skyzonehobbies.com/download.html
I am not sure if it's possible to calibrate the Steadyview receiver. I will double check it with Skyzone.
Best reviews on the net mate ! thanks.
Thanks a lot bro!
Have you tested skyzone 04X or 040?To get quadverisity can you use 2 steadyview or 2 rapidfire receivers in 040?
Great test and review as always my friend! More and more I need to get a set of those 300O's to replace my old Aomway Commander V1S's
I have those old goggles too! They have served me well. With the DJI V2 digital FPV goggles rumored to be released soon, I highly recommend not buying into a not too long to be dead analog technology! I've saved my money and am ready to buy digital when the V2's comes out. With the close to year ago leak, from the Jan. 2020 consumer elections show, saying DJI is coming out with a 20x20mm AIO DIGITAL single board option that will retail for around $50, buying analog seems like a total waste of money. After those two releases I believe analog will completely die and be gone in 2, at most 3 years.
I have a ton of experience dealing with newly emerging technologies, because I was in the electronics industry for well over 30 years. Analog will die. What happens is more and more digital products hit the market and manufactures see sales of analog dwindle. They then slowly but surely stop producing it because sales sag, and products don't sell fast enough to warrant keeping them around and producing more. So they discontinue it. Happens all the time. Thousands of times over my career. It will definitely happen to analog FPV, without a doubt! So, buying into a dead end technology is a short term, but very expensive proposition! 😩 🕊️
For nearly the same amount of money you'll be able to buy the V2 digital goggles! People sometimes complain that it's not the goggles that are too expensive, but the "Air Unit", but with that 20x20mm AIO digital board on the way, that won't be the case anymore. Neither will equipping micro quads and who0ps with digital! So, my friend, think very, very hard about whether you want to throw money at a soon to be antiquated technology. Me, I haven't been spending hardly anything on analog products this entire year! Certainly not over $100. I truly think both of these new digital products will be released by Springtime. 🤔😎🤘
Happy New Year! 😁
@@noforyoutubepremium3108 Thanks for the suggestions my friend, but I personally refuse to support DJI, so I'm waiting until other systems catch up to them in the digital field, myself. Happy holidays to you as well 😁
Thanks Jeff!
Depending on the price, you might want to get the SKY04X as they feature a higher resolution screen, which makes them a better option in case you will decide to go for the Shark Byte system.
@@KremerFPV That's a great point, too, actually, and yes, the shark byte system has my eye so far, as better cameras seem to be coming out for it. I also prefer the analogue-like breakup of that system, rather than the blackout at range of the DJI system!
@@jeffpv Hopefully I will be able to test it soon as for now I am facing difficulties getting a set...
Really nice video good job 😉🍻
Thank you! Cheers!
Great video. It seem that the steadyview did better. I just got my skyzone04x. Which combo will you recommend today as far as using both receiver slot on the skyzoneo4x. The steadyview comes with the unit so should I just get a second steadyview or a long range module or the rapid-fire .
Thanks! I would recommend to get another Skyzone module instead of purchasing an RF module. It will still be a good setup for long range as you can use 3 patch antennas and 1 omni.
The steadyview almost seems to look like it has a higher bitrate picture (look at the skies)
Is better two patch antennas in one side of steady view or split them?
Amazing test! Thank you Gal as always! Unfortunately the steadyview receiver does not support my EV200D goggles :-(
Thanks Peter. Yes this is unfortunate indeed...
www.banggood.com/SKYZONE-Receiver-Bay-Mount-Holder-DIY-Case-Cover-for-02C-02X-03S-03O-FPV-Goggles-p-1657852.html?cur_warehouse=CN&rmmds=search
Can you explain more about what new hardware/software they are working on and is it worth waiting for update
Sorry but I don't have more information. I hope the solution will be a on a software basis only so no physical upgrade will be needed.
Gal, are the two modules you have exactly the same when you look at them? I saw some other info that says the machine and skyzone mode is different.
Also did you have the 4 rssi bars on the goggle osd? Thanks
Yes, I got the 4 RSSI bars on the OSD and I can confirm that the modules are 100% identical. The goggles (EV300O & SKY04X) are using a different firmware which probably only differs in the startup logo.
Interesting comparison would be how they both deal with multipath in closed spaces when you push the output power on the VTX this is supposed to be the biggest strength of the rapidfire.
Thanks, I plan to test it soon.
Hi Gal ! Hope your fine. I know that your video have been post since a while but do you know what is the best firmware version for quadversity steadyview mix?
Have a lot of Color switching issue and test a lot of version without be satisfied.
Or do you use only quadversity mode ? Thank’a for your reply and your word.
Hi there! Sorry but I don't have these goggles anymore...
The best option is to reach out directly to Skyzone and see what they have to say. If you don't get a response ping me and I'll see what I can do.
Gal, I really appreciate the time and effort you took to make this great comparison video. Thank You!. But as a new Skyzone 04X owner I'm most interested in what I believe you are referring to as their Steadyview X2 module and I hope it comes with a link to a goggles firmware update able to support fusing all 4 RF inputs into the 04X screen.. however I don't see any link to it in your "MORE" affiliate links, nor on Banggood.com .. does such a Skyzone compatible module exist? where can I get it please? Sorry if I'm just missing it somehow.
My pleasure Jim. The RapidMIX (which is linked in the description) will fit your SKY04X as it's 100% completely identical to the Skyzone Steadyview receiver. I hope it helps :-)
@@KremerFPV i ordered it from BG
My module covers do not stay on good, you can easily wiggle the receiver and cover loose, anyone else experience this ? I don't see replacement options out there anywhere
Mine is well placed. I suggest contacting Skyzone.
Can i do this woth cobra x ?
No one tops your tests man!! Hands down the best in the game
Thanks a lot Josef!
So can you run a steady view and a rapid mix at the same time in the 04x or do the modules have to be the same?
Steadyview and RapidMix are identical, so yes, you can (Rapid)Mix them out ;-)
hi Gal. i got my skyzone 04L,and i have been experimenting the difference between normal and steady view x..i am using 2 stready view receivers.and thought i could figure which mode is best at 25mw quadversity at point of poor signal.i cant tell difference.thanks
Thanks for your feedback :-)
@@KremerFPV what is the difference between the 2 modes ( normal and steady view x) when using 2 receivers.i cant find an answer nor see a noticable difference.much appreciated 👍
To be honest I didn't see that Quadversity is better)) Here it was necessary to do a blind test, because when a new model is announced, you subconsciously expect a miracle from it. Barnum effect however... Thanx for new video.
100% well said. There where little moments where rapid fire did better. I bet the brown iut in turning round was more to do with docker postion. There was nothing in it.
I will run more tests. This was just the first test so stay tuned.
Nice test, I was wondering if you could also test just 1 rapidmix receiver against the rapidfire as nobody has done a test like this, maybe when you do the multipathing test?
@ 1:58...????
@@steve_beatty Yes but a side by side test is more interesting than 2 of the rapidmixes vs a rapidfire IMO
@@justfpv1432 I think he said " A single rapid mix is not as good as a single rapidfire" ??...Perhaps I misunderstood... 🙃
Joshua bardwell did
Thanks. I will test it too in the near future. In my experience as I said the RF beats a single RapidMIX / Steadyview receiver but I might post a video to verify it.
I wonder: perhaps using linear antennas will work better with quadversity.
Yes - it's an option that I haven't tried unfortunately.
Hey Gal, nice informative review as always! Thank you. I would be very interested in this module but i don't see any buttons or joystick on it, so i guess it will not be compatible with my Skyzone Sky03o with the external module adaptor. Right?
Thanks Nick! That's correct - it's only compatible with the SKY04X and the Eachine EV300O.
Thank you for great review.. for quadversiy upgrade did you just attach another ramidmix module? Or did you perform any software upgrade for quadversity?
My pleasure :-)
You need to have to RapidFIRE / Steadyview receivers, so yes.
Can I use rapidmix I order rapidmix from banggod and the goggels but the recivers Are not the same
Yes
4 patch antennas would be nice for long range :D something smaller like menace pico or smth.
or maybe some DIY helical (5 or 7 turn)... from my experience it performs even better for LR.
Very good test 💪👏👏👏👏👌
Thank you! Cheers!
Shall I buy the ev800d or the new cobra s?
I didn't test the Cobra S, but I think that they will be better than the EV800D. If you can afford it, it's probably better to go with the Cobra X (Better screen and DVR).
Which is the Best module reciever for ev200d?
You can use RapidFire.
but is it really doing 4 video feeds fusion using internal IC?
I doubt it. I think that it peaks the best signal out of the two modules.
will Eachine RapidMIX work on Skyzones? Skyfusion is not available yet
Yes it will (tested and confirmed).
Maybe if it comes without modules. Maybe I'll buy it because it will be cheaper too. 😀
Great video thank u
Thanks!
This is really on 25mW ???? You blow me away, incredible..! 😮
Yep 👍
My module not working right? - Rush vtx 800mw with menace antenas, after 1,5 km I got no reception, any ideea for me?
Which antennas are you using?
Menace combo pico +lr rhcp
But where I can get a stand-alone rapidmix/steadyview RX (for quadversity)?
Banggood
@@bozosni Didn’t find.
bit.ly/EachineRapidMix
Oh yes!
Kramer just need a video on setting up quadiversity on O4X
All you need to do is to get another RapidMix / SteadyView receiver and you're good to go.
I also have problems with the colour of the sky flickering like that. How do I fix it?
edit: spelling mistake
Did you update the firmware of the RX to the latest one?
@@KremerFPV I did and it was bad then. Upgraded to v2.2 and that was slightly better still not great. Got hold of v2.0 but havent updated to it yet will see if that works
Couple months later and I've tried everything with no luck. I get screen rolls and colour glitches when using mix and sometimes I even get rolls during diversity
Is it possible to use rapidfire on eachine ev300o?
Yes
Are you running mix mode or diversirt mode on quadversity?
Mix mode.
@@KremerFPV Thanks, I had the same question (2 years later) as it wasn't too clear from the video.
@@WinstonSmith1984 np
On range the rapidfire dropped out before the steadyview o_O I just ordered a Sky04x because I'm neither happy with the HDO2 touching my eyelashes nor with the orqa because of the barrel distortion / tunnel view. From what I saw the Sky04x have the better image quality. Can't wait till they arrive!
Hope you will get them soon. Happy flying!
@@KremerFPV Got them and they will be my daily driver now. Such brilliant displays to adjust.😍
@@marlin-fpv That's awesome!
@@KremerFPV On PAL with a 1000 TVL cam (Racer5) the picture looks like watching Sharkbyte DVR.
Nice video mate! Is it possible to flash Skyzone firmware on rapidmix module so you can use it on Sky04x for quadversity?
Thanks Nick! Yes, as far as I know these are identical VRXs with a different name.
Can I use rapidmix and steadyview
Yes, they are identical.
Hi Gal, very good this rapidmix the new Skyzonz come with a better I think. 😀
RapidMIX and Steadyview are the same receivers with a different name.
@@KremerFPV Thank bro !
I wait the new google Skyzone 04 👍 Kim said better.
What is the latency?
Check out one of my latest videos.
Another tricky test well executed.....🤔🤔🇬🇧🇬🇧🇬🇧🇬🇧😀
Thanks a lot!
Why not test 1 stady view vr 1 rapid fire?
I will test it as well soon.
Thanks from Doha!
Fly safe and take care!
@@KremerFPV have a good one, mate!
Nice 👍
Thanks ✌
To me they are the same, proving I do not need to spend money on fatshark AND another 100 on a module when I can just get the skyzone cheaper
Finally rapidfire has been dethroned. Great job Skyzone and Eachine!
No different. The range test signal loss when turning round i bet was more to do with where the the rapid fire module was placed in the docker Think about it. If it was on his head u bet it would of been the same. There where little moments where rapid fire was clearer also. Fusion rapid fire steady view we are talking
Nothing in it not something as dramatic as de throning. 🤣🤣
I will run more tests soon, so no dethroning yet ;-)
@@KremerFPV Looking forward to it ;) Also, the steadyview receiver is also the same as the Skyzone Cobra X Box Goggles right? or this one has quad antennas?
Keeping my rapid fire on my HD3’s and running quadiversity on my O4X
Damn 2 people didn't like the outcome
Haha, don't mind them ;-)
I too have those old Aomway goggles. They have served me well. With the DJI V2 digital FPV goggles rumored to be released soon, I highly recommend not buying into a not too long to be dead analog technology! I've saved my money and am ready to buy digital when the V2's comes out. With the close to year ago leak, from the Jan. 2020 consumer elections show, saying DJI is coming out with a 20x20mm AIO DIGITAL single board option that will retail for around $50, buying analog seems like a total waste of money. After those two releases I believe analog will completely die and be gone in 2, at most 3 years.
I have a ton of experience dealing with newly emerging technologies, because I was in the electronics industry for well over 30 years. Analog will die. What happens is more and more digital products hit the market and manufactures see sales of analog dwindle. They then slowly but surely stop producing it because sales sag, and products don't sell fast enough to warrant keeping them around and producing more. So they discontinue it. Happens all the time. Thousands of times over my career. It will definitely happen to analog FPV, without a doubt! So, buying into a dead end technology is a short term, but very expensive proposition! 😩 🕊️
For nearly the same amount of money you'll be able to buy the V2 digital goggles! People sometimes complain that it's not the goggles that are too expensive, but the "Air Unit", but with that 20x20mm AIO digital board on the way, that won't be the case anymore. Neither will equipping micro quads and who0ps with digital!
So, my friends, think very, very hard about whether you want to throw money at a soon to be antiquated technology. Me, I haven't been spending hardly anything on analog products this entire year! Certainly not over $100. I truly think both of these new digital products will be released by Springtime. 🤔😎🤘 The only reason they aren't here already is the pandemic, and the way it has slowed sales with so many people out of work or struggling and spending way less on none essentials. Now that a vaccine is here, I believe new excitement will follow!!!
Happy New Year! 😁
That's wishful thinking. Why would DJI make a analog goggle? This is getting plain crazy.
$50 AIO digital board is here "Fat Shark Shark Byte TX5S.1 VTX"
@@cs-xd9gy Nobody said anything about DJI and analog.
@@noforyoutubepremium3108 your right, I must have read AIO as analog. I take it back.
@@cs-xd9gy easy to do, bro...no problem. :)
👍👀🇭🇷
More as 1km on 25mw.. how.. sick
Good receivers and descent antennas in an open area. Will push it further on the next test ;-)
25 mW > 1 km ???
Crazy, eh? :-)
patch or helical antenna and higher altitude is the answer :)
Why you did not put both patch on the same reciever and both omni on the other reciver. I belive it is the best way for image quality. If 1 reciever have a patch and a omni, when you will fligth outside the rage of 1 antenna, the reciever will not be able to mix the signal. With the 2 patchs in the same direction, the reciver will be able to match both signal and get you a better image.
Steady view is not worthy. Me and another youtuber have discovered there is a major manufacturing flaw that skyzone refuses to help with. I had two of them with this problem. If you get a good receiver (or were sent one for review) you are all set. Otherwise you are screwed with extreme ghosting due to some sort of cross interference, and color blowout on on a regular basis. I had to purchase a 35 dollar AKK receiver to make sure I am not insane and guess what? Issues are gone! Stay away from steadyview!
Thanks for sharing your experience.
Wew 25mw 1km
Yes I didn't think I could get this far too :-)
Analog system gives awfully bad picture quality despite expensive hardware