Watch Next 😎👇 💚 Silhouette Cameo 4 Tips and Tricks th-cam.com/video/SeXQvfRzFq8/w-d-xo.html 🖨 How to Print and Cut with Silhouette Cameo th-cam.com/video/M3NcIcIlrF4/w-d-xo.html 🥰 Silhouette Cameo 4 Blades Explained th-cam.com/video/2B5o96Ot-Dw/w-d-xo.html
Perfect! Great! Just the video I needed! Thank you so very much!!!!!! Very, very, informative and well presented. Easy to follow! Keep 'em coming!!! LOL
Thanks for the tutorial! I have been having nonstop print & cut issues with Cricut lately, with no customer support (who has time to wait on hold for 2hrs, and an online ticket I filled out a week ago has not been responded to)...I'm debating buying a Silhouette instead. Will play with the free version of the software first, but so far, I like what I see! :)
Hey Mel! Thanks for watching! In my experience, my Cricut Maker has been more reliable on Print and Cut than any of my Silhouette machines. While I'm a huge Silhouette fan, this is one area that Cricut has been stronger. What type of issues are you having? Perhaps I can help! ---Becky
@@DesignBundles HI Becky! My Air Explore 2 won't calibrate. I make stickers for my planner, and the basic boxes end up with the border on 2 sides, and 2 sides are white. Any stickers that are odd shapes (ex deco), get cut off on one side and extra white on the other. I always turn on bleed. I have done a "hard" firmware update 3 times (unplug, hold down load button, plug back in and power button is red, then update firmware in DS). I have also run the calibration a dozen or so times - it never cuts on the box, and sometimes the lettered and numbered lines are all identical - barely touching the black lines. 🤷♀️ If you have any ideas, I welcome them! 🙂
You’re not likely to do any better with support from Silhouette America. They seem to rely on users finding generous “super-users” to solve problems. All marketing, NO support.
🌟 Discover the wonders of UV DTF Christmas prints with Alpha DTF Print! What's your favorite thing about incorporating DIY elements into your holiday decor? @AlphaDTFPrint
LOL, doesn't it though? I never realized how loud it was until I purchased a Cricut. I could see how some crafters would find this a deciding factor. Thanks for watching! ---Becky
I enjoy watching these videos..you start out fine as far as us hearing you.. when you switch? It goes to mono instead of stereo and it’s difficult for some to hear..
This was a really great explanation of the process but there was one thing I kept wishing for.... Your mouse cursor is tiny and hard to see and you move it so fast with no explanation of where I'm looking for what button or panel that I kept getting lost and having to rewatch parts over and over to try and figure out what you were doing. Can you please slow down just those little bits and tell us where these things you're pressing are? Thanks so much!!
I hate registration marks thru never help show please cut deep cardstock print and cut stickers without registration mark white around border trace or offset
Hi! I Love your video! I was hoping to learn how to troubleshoot on how to properly register my prints so my cameo can cut. I'm at my wits figuring how to use it for my stickers.
I recommend checking your lighting when your machine is trying to read the registration marks. Sometimes too much light can cause it to read incorrectly.
Been having terrible issues with my cameo. Nothing registers, when it does, the cuts are distorted and long. If they're not long, they're usually over half-an-inch off. Any advise?
Another great video thank you! I am looking to do custom print and cuts with custom colors. Can I use files I have made myself and saved in my library for print and cut?
Hey Hester! Great question! I use an inkjet printer and these label sheets are from Online Labels. They have a wide variety, so I'm not sure that these in particular are acid free, they probably have one that is! I'd check them out for sure. Hope this helps! -Becky
I'm new to this i had went to print something out at size A4 before printing it only showed half a page with a line down the middle any ideas where i went wrong
I would check your blade first to make sure your blade is all the way in. We also have this more updated video that may be helpful - th-cam.com/video/M3NcIcIlrF4/w-d-xo.html
Hi, which printable paper would you recommend for wall decals so they will be removable (pls share a link if possible), thanks so much! The video is awesome!
Hi! Thank you very much for this great tutorial! I'm new to crafts, wanted to start my small sticker business in Cyprus. I called Brother reps in here to enquire about Brother machine which can print stickers. The guy told me Brother machines can't be used for this. But I saw you using one. Now I'm confused. Would you please advise which machine I should buy and what type of paper I need for stickers? I want to buy Silhouette Cameo 4 Pro, but in EU they don't have it yet so waiting on them to re-stock. Also, is it posdible to print transparent stickers on Brother machine? What type of machine and paper should be used? Can I use Silhouette to cut transparent stickers? Sorry for bombarding you with so many questions. Would appreciate your help. Thank you!
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project. - Brittany
Hey, so glad I found this channel. I've got almost the identical images set so thought it would be great to follow along. However, when I go to trace even with it at 100% it isn't making the whole area yellow. Any ideas on why this would be?
I love your videos! I am new to this. What kind of paper do you recommend and also what printers? I don't own a printer but do need to get one for stickers and for sublimation. Thank you!
Hi there! We've used this paper here in many of our videos: amzn.to/31ZtFUa You don't need a new print for stickers, whatever printer you have is fine! For sublimation, you do need a sublimation printer for the special ink.
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I love this tutorial. Since using my cameo which I just recently purchased I only have cut heat transfer paper. I want to create stickers like this, and my question is. What type of printer do I need to print on Vinyl sticker paper ? I currently have a Epson Expression XP1500 that use I use for my heat transfers, I want to be able to print on Vinyl as well.
Hey there! A regular inkjet printer will be just fine, and if you have a laser you'll just want to check out what materials are compatible with laser printers. If you are happy with the quality of the print on the printer you have, then you should be happy with using printable vinyl. If you are talking about actually making pattern vinyl, that will catapult you into the commercial printer territory for solvent and eco-solvent printers. Hope this helps! ---Becky
Do I need to upgrade to print and cut stickers? What is the difference between business and designer? You mention designer a lot. It seems to be plenty for the projects I'd like to do.
I am attempting to make a sticker that is circular and add text within the circle or oval but only cut around the circle. Am I able to add a shape and then put text inside the shape and then cut around the perimeter? As opposed to using a design from the design store?
Hey Dashondria, you absolutely can. You'll want to set up your file just the way you want, THEN when you click over to your Send panel, you can click on the inside pieces and choose "No Cut". Repeat this for everything that you do not want to cut and only your circles should be lit up in bright red. Hope this helps! ---Becky
I have a very basic and cheap inkjet printer. My next purchase will be a Canon photo printer, that have one designed for Crafters that I am dying to get my hands on. Hope this helps! ---Becky
It will depend on your printer, I use this paper - www.amazon.com/dp/B07ZCKR97Z?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_13&=&crid=320V1YF7KHKZR&sprefix=sticker%2Bpaper&th=1 - Brittany
really nice video, I want have a question you might be able to help me with, 1st. Do you put your A4 Paper on the matt at the A4 line or the 8,5x11 line? 2nd. I needed to cut a few circle stickers however it always cuts off a bit for example there is a bit of the white sticker paper on my circle, but I don’t want to add a white outline to my logos. Do you have any ideas what I might be doing wrong? 3rd: For sticker sheets I always draw my stickers in Procreate on an 8,5x11 inch size and just import them as they are to silhouette, is that okay ? Cause you added the background after that , would you recommend another Procreate size ir technique?
Hello! These videos are super helpful! I was wondering if you knew how to fix alignment issues when printing through Silhouette studio. I've printed out so many stickers but there are always alignment issues and I haven't been able to print out one perfect sticker yet! Do you have any suggestions or is there a video you would recommend? Thanks so much!
Hey Suki! So I do have some basic tips for helping with alignment issues. Number one, always make sure that your screen matches your mat. So what this means is to double check that your page size is set correctly, that the margins on your printer aren't going to interfere, and that your registration marks are set up correctly. Number two, try adding an additional light source, some crafters even shine a flashlight over the area. Your Cameo has an optical lens that needs to "see" and heavy shadows or dim lighting can interfere. Number three, practice on copy paper before using more expensive material. This will help you with your frustration. You can also use sketch pens to "draw" where your cut will go, so you can test where the cut lines are before actually cutting. I'll put together a video on these tips soon so you can better see what I mean. Hope this helps! ---Becky
@@DesignBundles Thank you so so much for answering super quick! But my alignment problem is actually with the printing part of the process (not the cutting). I am able to print my files perfectly when not using the Silhouette Studio software but when I am using the software, there are always alignment issues here and there.
I followed this video and all of my cut lines are still way off, so I've wasted almost all my sticker paper. 😭😭 Any other SUPER detailed breakdown videos you recommend? Clearly I'm missing a few steps..
Hey Emily! Sorry to hear that your cut lines are so far off. I would do 2 things. First, switch over to copy paper for your testing so you can save your label sheets for when you are ready. Second, do you have a sketch pen? Sketch pens will write instead of cut, so you can see exactly where the cut lines would be without actually cutting. When you're ready to troubleshoot, I would take a few steps that usually make a huge difference: 1. Make sure your paper setup menu reflects exactly like what is on your cutting mat. Look and match up your registration marks, they should be in the same place on both your paper and the monitor (I had a huge issue with this on one of the recent updates). 2. Make sure you have accurate lighting, use a flashlight or lamp if you need to, it might make a difference. Ok, let me know what you think and we'll troubleshoot some more! ---Becky
Hey Bre! Last time I used the Silhouette Go app, this feature wasn't available, but I haven't tested it again since it was released from beta testing. Initially I don't think an iPad will be enough for importing clipart to create stickers. Hope this helps! ---Becky
Good question Kathey! This is printable sticker paper, but the same concepts would apply for printable vinyl, you would just use different cut settings. Hope this helps! ---Becky
Why is it that people who make these kind of videos just assume that only women watch them, then address their audience as “ladies” or “girls” as this presenter did. I was looking for tips to make stickers with my new Cameo 4. The fact that I’m male is irrelevant, it was the information contained in the video that I was after. For future reference and videos, please don’t assume that all your audience is female
I have the 4 plus and it is trash! brand new out the box I tought iut how to cut by cutting the machine in half with a saw off works like a charm dont buy the cameo plus trash1!!!!
Watch Next 😎👇
💚 Silhouette Cameo 4 Tips and Tricks
th-cam.com/video/SeXQvfRzFq8/w-d-xo.html
🖨 How to Print and Cut with Silhouette Cameo
th-cam.com/video/M3NcIcIlrF4/w-d-xo.html
🥰 Silhouette Cameo 4 Blades Explained
th-cam.com/video/2B5o96Ot-Dw/w-d-xo.html
Perfect! Great! Just the video I needed! Thank you so very much!!!!!! Very, very, informative and well presented. Easy to follow! Keep 'em coming!!! LOL
Thanks, I can count on you to make these tutorials so easy to follow and understand. You help me alot with problems I seem to have with my Silhouette.
Glad to help! 😊
@@DesignBundleswhat card stock setting did you use there is several please and thank you
You explain things so well and plainly. Thank you!
Glad it was helpful!
You are such an awesome teacher. Thank you.
Thank you so much Willam - CrystalAnn
Thank you so much I was so scared to try this and it took 3 years to find out its so easy with your help.....
You are so welcome!
not only lady's in here there man watching this video too!
Hi there!! We are glad you stopped by. We appreciate ALL of our viewers 😊
Thanks for the tutorial! I have been having nonstop print & cut issues with Cricut lately, with no customer support (who has time to wait on hold for 2hrs, and an online ticket I filled out a week ago has not been responded to)...I'm debating buying a Silhouette instead. Will play with the free version of the software first, but so far, I like what I see! :)
Hey Mel! Thanks for watching! In my experience, my Cricut Maker has been more reliable on Print and Cut than any of my Silhouette machines. While I'm a huge Silhouette fan, this is one area that Cricut has been stronger. What type of issues are you having? Perhaps I can help! ---Becky
@@DesignBundles HI Becky! My Air Explore 2 won't calibrate. I make stickers for my planner, and the basic boxes end up with the border on 2 sides, and 2 sides are white. Any stickers that are odd shapes (ex deco), get cut off on one side and extra white on the other. I always turn on bleed. I have done a "hard" firmware update 3 times (unplug, hold down load button, plug back in and power button is red, then update firmware in DS). I have also run the calibration a dozen or so times - it never cuts on the box, and sometimes the lettered and numbered lines are all identical - barely touching the black lines. 🤷♀️ If you have any ideas, I welcome them! 🙂
You’re not likely to do any better with support from Silhouette America. They seem to rely on users finding generous “super-users” to solve problems. All marketing, NO support.
@@hobbyhopper3143 thanks! I stuck with it with Cricut, got a replacement machine amd have been back up and running (thank goodness!) for a while. 🙂
Great to see you and the cameo. Thank you!
Thanks for watching!
Thank you this video worked for men
What is the paper that you use for the stickers
Yes! What kind of paper did you use for the stickers?! Thank you!
Love design bundles! Thank you for this tutorial! Been struggling with this 😅
Glad it was helpful!
Hahaha was searching for this videi in weeks. Thank you Becky. 🥰 Learning is fun
New subscriber suggestion from TH-cam. Going to be printing baptism stickers.
Thanks for subscribing, we're happy to have you here! 😊
Great tutorial.
Hi, thanks for this tutorial. Can I please ask what you use to record your screen with all you are doing the tutorial? Thanks x
Thank you, so helpful
🌟 Discover the wonders of UV DTF Christmas prints with Alpha DTF Print! What's your favorite thing about incorporating DIY elements into your holiday decor? @AlphaDTFPrint
I like to create my own stickers in canva but how do I save them and move them over to cameo for cutting?
I swear the Cameo 4 sounds possessed.
LOL, doesn't it though? I never realized how loud it was until I purchased a Cricut. I could see how some crafters would find this a deciding factor. Thanks for watching! ---Becky
I enjoy watching these videos..you start out fine as far as us hearing you.. when you switch? It goes to mono instead of stereo and it’s difficult for some to hear..
Hey there! I've switched to updated equipment on my more recent videos. If the problem keeps up, let me know! ---Becky
This was a really great explanation of the process but there was one thing I kept wishing for.... Your mouse cursor is tiny and hard to see and you move it so fast with no explanation of where I'm looking for what button or panel that I kept getting lost and having to rewatch parts over and over to try and figure out what you were doing. Can you please slow down just those little bits and tell us where these things you're pressing are? Thanks so much!!
Hi Barbara! Thank you for watching and we appreciate the feedback. We will correct this in the future!
I hate registration marks thru never help show please cut deep cardstock print and cut stickers without registration mark white around border trace or offset
Wow great video!
Thank you 😄
Hi! I Love your video! I was hoping to learn how to troubleshoot on how to properly register my prints so my cameo can cut. I'm at my wits figuring how to use it for my stickers.
I recommend checking your lighting when your machine is trying to read the registration marks. Sometimes too much light can cause it to read incorrectly.
What paper sticker you use?
Been having terrible issues with my cameo. Nothing registers, when it does, the cuts are distorted and long. If they're not long, they're usually over half-an-inch off. Any advise?
I've added text to an image I want to cut. Cameo wants to cut around text as well as the actual image, how do I prevent this? Anyone? Please?
What card stock setting there is several?
Thank you!
Hannah Mary You're Welcome Hannah! :)
Another great video thank you! I am looking to do custom print and cuts with custom colors. Can I use files I have made myself and saved in my library for print and cut?
Great tutorial! It would be awesome if you could do a tutorial using the printable vinyl :-)
Hey Suzanne, I will definitely move this up on the list! Thanks for the recommendation! ---Becky
Hello, I'm just a beginner and I love your video's but I don't find the crosshairs in the Silhouette Studio (Silhouette Studio 4.4), grt
I find it, you must have the Silhouette Designer Edition
Love it! A few questions :
-Did you use an ink jet or laser printer?
-Where did you buy your stickers from?
-Are they acid free? Ty!
Hey Hester! Great question! I use an inkjet printer and these label sheets are from Online Labels. They have a wide variety, so I'm not sure that these in particular are acid free, they probably have one that is! I'd check them out for sure. Hope this helps! -Becky
Yes, thank you!
Great tutorial! What kind of sticker paper are you using? I find that what I'm using gets jammed in my inkjet printer. Help!
Im new to shillohette. What kind of paper did you use?
I'm new to this i had went to print something out at size A4 before printing it only showed half a page with a line down the middle any ideas where i went wrong
I have followed these instructions to the letter and I still can’t get my stickers cut through any suggestions
I would check your blade first to make sure your blade is all the way in. We also have this more updated video that may be helpful - th-cam.com/video/M3NcIcIlrF4/w-d-xo.html
Where can i get the template
Please mention your printing machine and printing paper too.thanks and goodluck
Hey Asini! I have a HP 3755 inkjet printer and my labels come from OnlineLabels. Hope this helps! ---Becky
do you have a video about importing fonts? i'm on my mac and been loading up fonts all afternoon and suddenly it all dissapeared
Hi, which printable paper would you recommend for wall decals so they will be removable (pls share a link if possible), thanks so much! The video is awesome!
Hi Rita! Both Cricut and Starcraft make a printable vinyl that could be used for your project! - Dawn 🙂
Hi! Thank you very much for this great tutorial! I'm new to crafts, wanted to start my small sticker business in Cyprus. I called Brother reps in here to enquire about Brother machine which can print stickers. The guy told me Brother machines can't be used for this. But I saw you using one. Now I'm confused. Would you please advise which machine I should buy and what type of paper I need for stickers? I want to buy Silhouette Cameo 4 Pro, but in EU they don't have it yet so waiting on them to re-stock. Also, is it posdible to print transparent stickers on Brother machine? What type of machine and paper should be used? Can I use Silhouette to cut transparent stickers? Sorry for bombarding you with so many questions. Would appreciate your help. Thank you!
When I go to file and print none of my printers show up. I cannot find info to help online, nor at Silhouette.
I would recommend checking to see that your printer is connected via your computer settings.
My silhouette studio does not have the print bleed option. Is this going to still work?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project. - Brittany
So you're printing the stickers on a printer and just using the silhouette to cut them right?
Hi there! Yes, that is correct!
Are you not doing videos for Sillouette ?
We assure you there will be more Silhouette videos!
Hey, so glad I found this channel. I've got almost the identical images set so thought it would be great to follow along. However, when I go to trace even with it at 100% it isn't making the whole area yellow. Any ideas on why this would be?
Hey Joolz, the tracing is based on contrast, so it may not trace areas that are really light or white. Hope this helps! ---Becky
What kind of paper did you print on? was it vinyl sticker paper?
Hi there! It was glossy sticker paper that can be found here: amzn.to/3BHkX8K
what is the name of the paper you used in this video
Is using the rollers as a rule of thumb a technique when using registration marks? Great vid btw
I love your videos! I am new to this. What kind of paper do you recommend and also what printers? I don't own a printer but do need to get one for stickers and for sublimation. Thank you!
Hi there! We've used this paper here in many of our videos: amzn.to/31ZtFUa You don't need a new print for stickers, whatever printer you have is fine! For sublimation, you do need a sublimation printer for the special ink.
@@DesignBundles In your video, the stickers are glossy, but in the link you mentioned, it is matte paper. Can you please advise?
Do you have written directions for this?
Hi Cyndy! Let us know if this helps: designbundles.net/design-school/how-to-create-a-sheet-of-stickers-in-silhouette-studio - Dawn 🙂
I followed all steps but it will not pick up registration marks 😩 and when it does the cut is off and is cutting on the sticker
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I followed everything but mine is still showing that it'll cut everything that's in the sticker instead of the outer part.
Maybe you need to group or weld the image first.
Where do you find that compressed folder tool?
What kind of paper did you use?
Here is the paper that she used - amzn.to/3BHkX8K
I love this tutorial. Since using my cameo which I just recently purchased I only have cut heat transfer paper. I want to create stickers like this, and my question is. What type of printer do I need to print on Vinyl sticker paper ? I currently have a Epson Expression XP1500 that use I use for my heat transfers, I want to be able to print on Vinyl as well.
Hey there! A regular inkjet printer will be just fine, and if you have a laser you'll just want to check out what materials are compatible with laser printers. If you are happy with the quality of the print on the printer you have, then you should be happy with using printable vinyl. If you are talking about actually making pattern vinyl, that will catapult you into the commercial printer territory for solvent and eco-solvent printers. Hope this helps! ---Becky
@@DesignBundles Thank you kindly 🤗 Yes this helps a bunch, I appreciate you.
Hello. Can anyone please tell me if there is a laser light that shines from in-between the two blade holder?
It's not a laser, it's an optical lens to detect the registration marks. Hope this helps! ---Becky
Are you using special ink?
You do not need to for print and cut, just regular printer ink! 😊
Do I need to upgrade to print and cut stickers? What is the difference between business and designer? You mention designer a lot. It seems to be plenty for the projects I'd like to do.
Here is a comparison between the different software upgrades: th-cam.com/video/ybTdAgu7b5s/w-d-xo.html :)
wondering if you could tell me what kind of sticker paper your using ?
Hey Bridget! This is standard glossy sticker paper from Online Labels. Hope this helps! ---Becky
@@DesignBundles thank you Becky
I am attempting to make a sticker that is circular and add text within the circle or oval but only cut around the circle. Am I able to add a shape and then put text inside the shape and then cut around the perimeter? As opposed to using a design from the design store?
Hey Dashondria, you absolutely can. You'll want to set up your file just the way you want, THEN when you click over to your Send panel, you can click on the inside pieces and choose "No Cut". Repeat this for everything that you do not want to cut and only your circles should be lit up in bright red. Hope this helps! ---Becky
What is your preferred printer?
I have a very basic and cheap inkjet printer. My next purchase will be a Canon photo printer, that have one designed for Crafters that I am dying to get my hands on. Hope this helps! ---Becky
What kind of paper?
It will depend on your printer, I use this paper - www.amazon.com/dp/B07ZCKR97Z?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_13&=&crid=320V1YF7KHKZR&sprefix=sticker%2Bpaper&th=1 - Brittany
really nice video, I want have a question you might be able to help me with,
1st. Do you put your A4 Paper on the matt at the A4 line or the 8,5x11 line?
2nd. I needed to cut a few circle stickers however it always cuts off a bit for example there is a bit of the white sticker paper on my circle, but I don’t want to add a white outline to my logos. Do you have any ideas what I might be doing wrong?
3rd: For sticker sheets I always draw my stickers in Procreate on an 8,5x11 inch size and just import them as they are to silhouette, is that okay ? Cause you added the background after that , would you recommend another Procreate size ir technique?
For your 2nd part it sounds like your machine needs to be recalibrated. 3rd, that sounds like a good way to do it!
Design Bundles thank you a lot ♥️I will try the calibration then :)
I have watched this video over 10 times and none of these steps are working for me at all this is so frustrating for me
Can an image sticker from a silhouet be directly printed to a printer?
Yes, absolutely. You are able to print straight from Silhouette Studio to your printer. Hope this helps! ---Becky
Hello! These videos are super helpful! I was wondering if you knew how to fix alignment issues when printing through Silhouette studio. I've printed out so many stickers but there are always alignment issues and I haven't been able to print out one perfect sticker yet! Do you have any suggestions or is there a video you would recommend? Thanks so much!
Hey Suki! So I do have some basic tips for helping with alignment issues. Number one, always make sure that your screen matches your mat. So what this means is to double check that your page size is set correctly, that the margins on your printer aren't going to interfere, and that your registration marks are set up correctly. Number two, try adding an additional light source, some crafters even shine a flashlight over the area. Your Cameo has an optical lens that needs to "see" and heavy shadows or dim lighting can interfere. Number three, practice on copy paper before using more expensive material. This will help you with your frustration. You can also use sketch pens to "draw" where your cut will go, so you can test where the cut lines are before actually cutting. I'll put together a video on these tips soon so you can better see what I mean. Hope this helps! ---Becky
@@DesignBundles Thank you so so much for answering super quick! But my alignment problem is actually with the printing part of the process (not the cutting). I am able to print my files perfectly when not using the Silhouette Studio software but when I am using the software, there are always alignment issues here and there.
@@suzannelee5404 I have the same problem! Please let me know if you figured this issue out
I followed this video and all of my cut lines are still way off, so I've wasted almost all my sticker paper. 😭😭 Any other SUPER detailed breakdown videos you recommend? Clearly I'm missing a few steps..
Hey Emily! Sorry to hear that your cut lines are so far off. I would do 2 things. First, switch over to copy paper for your testing so you can save your label sheets for when you are ready. Second, do you have a sketch pen? Sketch pens will write instead of cut, so you can see exactly where the cut lines would be without actually cutting.
When you're ready to troubleshoot, I would take a few steps that usually make a huge difference:
1. Make sure your paper setup menu reflects exactly like what is on your cutting mat. Look and match up your registration marks, they should be in the same place on both your paper and the monitor (I had a huge issue with this on one of the recent updates).
2. Make sure you have accurate lighting, use a flashlight or lamp if you need to, it might make a difference.
Ok, let me know what you think and we'll troubleshoot some more! ---Becky
Can u do this off an iPad
Hey Bre! Last time I used the Silhouette Go app, this feature wasn't available, but I haven't tested it again since it was released from beta testing. Initially I don't think an iPad will be enough for importing clipart to create stickers. Hope this helps! ---Becky
@@DesignBundles thank u
Is this paper printable vinyl?
Good question Kathey! This is printable sticker paper, but the same concepts would apply for printable vinyl, you would just use different cut settings. Hope this helps! ---Becky
Why is it that people who make these kind of videos just assume that only women watch them, then address their audience as “ladies” or “girls” as this presenter did. I was looking for tips to make stickers with my new Cameo 4. The fact that I’m male is irrelevant, it was the information contained in the video that I was after. For future reference and videos, please don’t assume that all your audience is female
Hi Stephen! We totally agree with you that crafting is for everyone. At the beginning of the video Becky says, “Hey guys!”
@@DesignBundles watch the rest of the video
That is the most noteworthy thing you got out of watching this video?😂
@@nomaddesigner I know lots of male crafters and agree that we can all do better. You make a valid point.
I have the 4 plus and it is trash! brand new out the box I tought iut how to cut by cutting the machine in half with a saw off works like a charm dont buy the cameo plus trash1!!!!
Oh no! What type of trouble are you having? We'd be happy to assist you!