Early 2015 11" inch MacBook Air A1465 Disassembly SSD Screen LCD Battery Replacement Repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ส.ค. 2021
  • Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
    Venmo:
    "@BinhVu" Last 4 Digits if it Asks Are 6734
    Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
    itsbinhrepaired@gmail.com
    Patreon:
    / binhrepaired
    Feel free to mail me your old electronics or parts you replaced during an upgrade.
    Mail:
    It's Binh Repaired
    1288 N Hillview Dr.
    Milpitas, CA 95035
    Tesla referral link: www.tesla.com/referral/binh58522
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 15

  • @randymarchant737
    @randymarchant737 2 ชั่วโมงที่ผ่านมา

    It was like watching a artist making his masterpiece very nice job

  • @mbogat
    @mbogat ปีที่แล้ว +2

    Hi! Great thanks for a very instructive video, which guided me through a successful replacement of the screen in my 1465 Macbook Air.
    If I may, I would like to share a bit of my experience from that job, related to the most tedious ( your words, my sweat as well!) part of the job - the pulling out and threading back in the 'tags' holding the Wi-Fi antennae cable (17.12 min of your video and further).
    Well, there is an alternative method:
    1. 'Unstick' those tabs as shown in your video but DO NOT pull them out altogether - just 1/2 way will do.
    2. The 'loops' in those tabs through which the cable is threaded through are quite bit - you just open/widen them up a bit and the cable can be easily pulled out, leaving the tabs in place.
    3. After the new screen is installed, it is a simple job to 'thread' the cable back through those loops and then pull up the tabs up and stick them back.
    SAVES HEAPS OF TIME!!!
    Oh, if a tab gets pulled out altogether then putting it back 'loop' end first in much easier than the method you had to invent. That end of the tab is naturally 'curled up' and 'stiffer' that the sticky end of the tab, so it is easier to thread it through the slot and then lift if up with a needle put into the loop.
    Good Luck to anyone trying that job!

  • @mertdeniz93
    @mertdeniz93 5 หลายเดือนก่อน +1

    Well I would like to thank you for showing every step of it. I've watched other videos but this one is so good. I'm having problem with my screen and I am not sure that if I could fix it but the effort which u showed us amazing. Thanks man and GL.

    • @ItsBinhRepaired
      @ItsBinhRepaired  5 หลายเดือนก่อน

      Glad you appreciate it. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others and commenting to get the algorithm to recommend my channel. Thanks!

  • @Gone_Rogue300
    @Gone_Rogue300 5 หลายเดือนก่อน

    My 2012 a1465 screen just flickers..I tried an external screen and it still flickered. Changed the battery didn't help. Any tips what might help?

    • @ItsBinhRepaired
      @ItsBinhRepaired  5 หลายเดือนก่อน

      Motherboard :(

    • @Gone_Rogue300
      @Gone_Rogue300 5 หลายเดือนก่อน

      @@ItsBinhRepaired I shouldn't try the screen cable? Some tell me the GPU! I just want her to be stable again cuz I love this laptop! She's always so snappy!

    • @ItsBinhRepaired
      @ItsBinhRepaired  5 หลายเดือนก่อน

      If it's the same on an external then it's the gpu

    • @Gone_Rogue300
      @Gone_Rogue300 5 หลายเดือนก่อน

      @@ItsBinhRepaired Appreciate you brother. I was about to go spend money on a screen and everything else. Are GPU going bad for these models notorious? Cuz I see tons of people going through the same troubles.

    • @ItsBinhRepaired
      @ItsBinhRepaired  5 หลายเดือนก่อน

      @@Gone_Rogue300 yeah, pretty common